Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Req 69930 FORESTRY FOOT VALVESTRAINER, 2inch 51mm Female NPSH

Open
5664120International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Province of British Columbia, through the Procurement Services Branch and Ministry of Forests, has issued an Invitation to Quote (ITQ) for the supply of 1,000 new 2-inch (51mm) Female NPSH forestry foot valve strainers. These items are intended for emergency supply stocking for wildfire and disaster response and must be delivered Duty Paid (DDP) to the Chilliwack Equipment Depot. Technical specifications require a low-profile design suitable for high-pressure centrifugal pumps, featuring a spring-loaded check valve capable of holding a water head between 250 to 300 PSI and supporting flow capacities up to 100 GPM US. To be considered, bidders must be authorized manufacturers or suppliers and must submit a completed Bidder’s Info Sheet. The province reserves the right to request production-ready samples prior to the award. Payment for undisputed invoices will be made in Canadian dollars within 30 calendar days of the invoice date, subject to the Financial Administration Act. The contract is governed by standard terms and conditions, including a 15-calendar-day inspection period upon delivery to ensure goods are not damaged, defective, or counterfeit. There is no specified set-aside status for this solicitation.

General Info

BC seeks 1,000 forestry foot valve strainers for emergency wildfire and disaster response.

Documents

6
DOCX, High priority: read this first1 page · amendment
High
DOCX, High priority: read this first2 pages · specifications
High
PDF, High priority: read this first12 pages · contract-document
High
XLSX, High priority: read this first7 pages · rfp
High
XLSX, High priority: read this first4 pages · rfq
High
DOCX, Low priority1 page · submission-form
Low

Read all 6 documents

Due in 13 days

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 13 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 6 solicitation documentsRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyProvince of British Columbia → Procurement Services Branch
Contacts1 person available
OfficeCAN

Full Description

Show more
Req 69930 FORESTRY FOOT VALVESTRAINER, 2inch 51mm Female NPSH

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
Federal
GLAND,VALVE
Solicitation # N0010426QND48
This solicitation is for the procurement of a valve gland (NSN 4820-01-103-2740) designated as a Critical Safety Item and Special Emphasis material. Due to its use in crucial shipboard systems where failure could result in loss of life or the vessel, the contract mandates rigorous quality controls, including Level I Scope of Certification. The contractor must maintain a quality system compliant with ISO-9001 or MIL-I-45208 and ensure strict material traceability from the raw heat-lot to the finished component. Key technical requirements include quantitative chemical and mechanical analysis for QQ-N-281 material, non-destructive testing for welds, and adherence to specific brazing and welding standards such as S9074-AQ-GIB-010/248. The government will perform source inspection and acceptance at the origin, requiring the contractor to submit a Special Emphasis Certificate of Compliance and test certifications via Wide Area Workflow (WAWF) for review by the Portsmouth Naval Shipyard prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted more heavily than price. The contract specifies a 200-day delivery window, FOB Destination, and requires strict adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking. All waivers or deviations must be approved by the Contracting Officer, and any changes to the equipment's form, fit, or function require a formal Engineering Change Proposal.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332919
New
Federal
POPPET
Solicitation # N0010426QND70
This contract, issued under solicitation N0010426QND70 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, pertains to the supply of a main poppet for a regulator valve assembly, identified by part number V2C12939-4MF and governed by drawing V3E10064. The material must conform to SAE AMS 5643, Condition H-1025, and is designated as SPECIAL EMPHASIS Level I material due to its critical role in shipboard systems, where failure could lead to catastrophic loss of life, vessel, or systems. Strict traceability and certification requirements are mandated, requiring each component to be marked with a traceability identifier linked to chemical and mechanical test reports, with 100% inspection of all certifications and markings. All material must be free of mercury, and welding, brazing, and thread formation must adhere to Navy-specific standards such as S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, with procedures and qualifications submitted for prior approval. Electronic submission of documentation via WAWF is required, with certification data sent to Portsmouth Naval Shipyard for review prior to shipment, and no material may be shipped without formal acceptance. The contractor must maintain a certified quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or alternatively MIL-I-45208 and MIL-STD-45662, subject to government audit at any time prior to and during production. All subcontractors are bound by identical quality and traceability requirements, and the prime contractor is responsible for ensuring compliance throughout the supply chain. Testing, inspection, and non-destructive evaluation records must be traceable, comprehensive, and authenticated with electronic signatures that meet stringent controls, with no disclaimers permitted on certifications. The contract invokes full Navy configuration control, requiring Engineering Change Proposals for any modifications affecting form, fit, function, or interface, and mandates zero-defect acceptance criteria for all deliveries with lot sampling based on ANSI/ASQ Z1.4 or full inspection for small lots. Waivers and deviations of any significance require explicit approval from the Contracting Officer and must be submitted electronically. The contract is issued under Emergency Acquisition Flexibilities and is rated under the Defense Priorities
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE ASSEMBLY,MANI
Solicitation # N0010426QNE15
This contract is a solicitation for the teardown, evaluation, repair, and modification of a Valve Assembly, Mani (NSN 4820-01-389-2782). The material is designated as a Critical Safety Item and Special Emphasis material (Level I), as failure of this shipboard system could result in catastrophic loss of life or the vessel. The scope of work includes refurbishing the assembly to specific Vacco drawings and specifications, with a strict requirement for quantitative chemical and mechanical analysis of various components, including bodies, filter caps, and poppets. All internal threads must be cut rather than cold-formed, and rigorous testing is required, including intergranular corrosion tests, liquid penetrant inspections, and wedge tensile tests for headed fasteners. The contractor must maintain total equipment baseline configuration and submit all certification data via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Quality assurance is heavily regulated, requiring 100 percent inspection of material verification and traceability markings. Deliverables must be packaged according to MIL-STD-2073 and marked per MIL-STD-129 and MIL-STD-130. Award will be made to a single offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. The delivery period is set at 200 days on an FOB Destination basis.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in 29 days
View Details

More opportunities from Province of British Columbia → Procurement Services Branch

Same awarding agency

NAICS: 336991
New
International
Req 69883 FY27 - FOR - SBE - 2 eBikes
Solicitation # 5665101
The Province of British Columbia, through the Procurement Services Branch, is soliciting the procurement of two new adult-size medium electric mountain/fat bikes. These units must meet strict technical specifications, including a Performance Line CX Gen 5 motor system with a smart-system upgrade, a minimum 800 Wh removable battery, and two additional removable 800 Wh batteries. Hardware requirements include tubeless wheels with 29x2.40 tires, hydraulic disc brakes with minimum 200 mm rotors, a minimum 10-speed gear set with a thumb shifter, a 170mm dropper seat, and a specific suspension configuration consisting of a 130 mm fork and 120 mm rear shock. The bikes must be equipped with aluminum alloy non-clip-in pedals and include a 4A standard charger. The contract requires a minimum one-year full end-to-end warranty and a two-year limited warranty on major components. Delivery must be made DDP (Delivered Duty Paid) by March 31, 2027, during standard business hours, with a mandatory 48-hour notice period. The supplier is responsible for ensuring that each unit is properly unpacked, prepped, and ready for immediate operation by ministry staff upon delivery. Bidders must submit a completed Specifications Summary, a pricing response form, and a signed submission declaration via the BC Bid application to be considered for the award. There is no set-aside status specified for this solicitation.
Motorcycle, Bicycle, and Parts Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS