Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Request for Whitepapers: AEDC Velocity Alliance - A Multi-Billion Dollar OTA Consortium Opportunity

Active
FA9101-26-9-Velocity_AllianceFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The AEDC Velocity Alliance is a strategic multi-billion dollar consortium established by the Department of the Air Force, through the Air Force Test Center and Arnold Engineering Development Complex, to accelerate the modernization, restoration, and sustainment of critical national test infrastructure. Operating under the authority of 10 U.S.C. 4022 and 10 U.S.C. 2808a, this initiative utilizes Other Transaction Agreements (OTAs) rather than standard FAR-based contracts to provide an agile procurement vehicle for complex engineering and construction projects through Fiscal Year 2032. The scope of work covers 15 technical categories, including high-pressure process systems, high-voltage electrical infrastructure, heavy industrial construction, and advanced mechanical engineering services. Membership in the Alliance is granted through a phased onboarding process requiring the submission of a ten-page whitepaper. To be eligible, applicants must demonstrate partnership capabilities by collaborating with Non-Traditional Defense Contractors, Small Businesses, or Nonprofit Research Institutions. Mandatory requirements for membership include Joint Certification Program compliance and verified cybersecurity standards, specifically CMMC Level 2 certification or a validated NIST SP 800-171 assessment in the Supplier Performance Risk System. Once established, all project opportunities will be competed exclusively among Alliance members, with the majority of awards anticipated to be based on Best Value considerations.

General Info

Air Force consortium using OTAs for test infrastructure modernization through fiscal year 2032.

Agency

Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

NAICS

541330 - Engineering Services

Place of Performance

TN

Set-Aside

NONE

Documents

45

AEDC Velocity Alliance Base Articles

PDF, High priority: read this firstcontract-document
High

AEDC Velocity Alliance Base Articles - 5 Mar 26

PDF, High priority: read this firstcontract-document
High

AEDC Velocity Alliance Consortium Base Agreement Articles

PDF, High priority: read this firstcontract-document
High

AEDC Velocity Alliance Consortium Base Agreement Articles

PDF, High priority: read this firstcontract-document
High

AEDC Velocity Alliance Consortium Base Agreement Articles - 15 Jul 26

PDF, High priority: read this firstcontract-document
High

AEDC Velocity Alliance Consortium Q&A 4.27.26

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A 4.28.26

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A - 5.12.26

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A April 17, 2026

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A April 2026

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A April 2026

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A April 23, 2026

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A May 22, 2026

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum 3.31.26

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum 5.26.26

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum 6.14.26

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Consortium Q&A Memorandum 6.24.26

PDF, High priority: read this firstq-and-a
High

AEDC Velocity Alliance Program Objectives

PDF, High priority: read this firstprogram-objectives
High

AEDC Velocity Alliance Program Objectives

PDF, High priority: read this firstsow
High

AEDC Velocity Alliance Program Objectives - 21 Apr 26

PDF, High priority: read this firstprogram-objectives
High

AEDC Velocity Alliance Program Objectives - Infrastructure Projects

PDF, High priority: read this firstprogram-objectives
High

AEDC Velocity Alliance Request for Whitepapers

PDF, High priority: read this firstrequest-for-whitepapers
High

AEDC Velocity Alliance Request for Whitepapers

PDF, High priority: read this firstrequest-for-whitepapers
High

AEDC Velocity Alliance Request for Whitepapers Amend 1

PDF, High priority: read this firstrequest-for-whitepapers
High

AEDC Velocity Alliance Request for Whitepapers Amend 2

PDF, High priority: read this firstrequest-for-whitepapers
High

AEDC Velocity Alliance Request for Whitepapers Amend 3

PDF, High priority: read this firstrequest-for-whitepapers
High

AEDC Velocity Alliance Request for Whitepapers Amend 4

PDF, High priority: read this firstrequest-for-whitepapers
High

AEDC Velocity Alliance Request for Whitepapers Amend 5

PDF, High priority: read this firstrfi
High

AEDC Velocity Alliance - Request for Whitepapers (Amend 6)

PDF, High priority: read this firstrfp
High

Amendment 2 to AEDC Velocity Alliance RFWP

PDF, High priority: read this firstamendment
High

CMMC Information - Phased Implementation and Assessment Overview

PDF, High priority: read this firstspecial-notice
High

AEDC Velocity Alliance Q&A for Whitepaper Submission

PDF, Low priorityq-and-a
Low

Atch 3 CMMC Information

PDF, Low priorityspecial-notice
Low

Atch+5+-+UTSI+Map.pdf

PDF, Low priority1 page · other
Low

CMMC Frequently Asked Questions January 2026

PDF, Low priorityfaq
Low

CMMC Frequently Asked Questions Revision 2.3

PDF, Low priorityfaq
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

26 updates
PhaseSolicitation
Posted

Solicitation

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed. The point of contact changed.

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch
Contacts2 people available
OfficeARNOLD AFB, TN, 37389-1332, USA
Organization / AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch
Office AddressARNOLD AFB, TN, 37389-1332, USA
Contacts
Greggory Jones
contact@example.gov
Bailey Deason
contact@example.gov

Full Description

Show more

1. Strategic Purpose:
The Department of the Air Force, through the Air Force Test Center (AFTC) and Arnold Engineering Development Complex (AEDC), announces the establishment of the AEDC Velocity Alliance. This strategic consortium-based initiative is established under the authority of 10 U.S.C. § 4022 to accelerate the modernization of national test infrastructure in direct support of next-generation defense systems and key National Defense Strategy objectives.


The objective is to establish a pre-qualified industrial base to execute a multi-billion dollar portfolio of complex engineering and construction projects. Upon establishment, all projects under this initiative will be competed exclusively among Alliance members.


2. Key Dates for Industry:
The Government intends to onboard members in multiple phases.


  • Onboarding Opportunity 1:


    • Whitepapers Due: Closed

    • Mandatory Site Visit Window: Completed

  • Consortium Activation Date: 1 July 2026

  • Onboarding Opportunity 2:


    • Whitepapers Due: Closed

    • Mandatory Site Visit Window: Complete

  • Onboarding Opportunity 3:


    • Whitepapers Due: TBD

    • Mandatory Site Visit Window: TBD

  • This Request for Whitepaper notice will remain active until: 30 September 2032.


3. Action Required:
We invite all interested and qualified vendors to carefully review the attached documents in their entirety to ensure all mandatory onboarding criteria are satisfied within their whitepaper submission.


4. Classification Codes:


  • Primary NAICS Code: 541330 - Engineering Services: This NAICS Code will be utilized to determine size standard for consortium onboarding. Primary NAICS code at the project level may differ from 541330 and will be established in each Project Oppurtunity Announcement. 

  • Primary PSC Code: AC13 - National Defense R&D Services; Department of Defense - Military; Experimental Development
    (Note: While these are the primary codes, any NAICS/PSC code that fits within the scope of the Program Objectives is acceptable.)


Amendments:


30 Mar 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-3.30.26.pdf


31 Mar 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-3.31.26.pdf


31 Mar 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-3.31.26-2.pdf


14 Apr 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-4.15.26.pdf


Section 4: Classification Codes was modified to clarify the following: Primary NAICS Code: 541330 - Engineering                Services: This NAICS Code will be utilized to determine size standard for consortium onboarding. Primary NAICS code                     at the project level may differ from 541330 and will be established in each Project Oppurtunity Announcement. 


17 Apr 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-4.17.26.pdf


21 Apr 26: Posted the following Amended Documents -


AEDC Velocity Alliance - Request for Whitepaper-Amend 1 - 21 Apr 26.pdf


Atch 1 - AEDC Velocity Alliance Program Objectives - 21 Apr 26.pdf


Atch 2 - AEDC Velocity Alliance Base Articles - 21 Apr 26.pdf


AEDC Velocity Alliance Consortium_Q_A-4.21.26.pdf (Answer to Q.9 Amended)



23 Apr 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-4.23.26.pdf


24 Apr 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-4.24.26.pdf


27 Apr 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-4.27.26.pdf


28 Apr 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-4.28.26.pdf


30 Apr 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-4.30.26.pdf


1 May 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-5.1.26.pdf


1 May 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-5.1.26-2.pdf


12 May 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-5.12.26.pdf


15 May 26: Posted Amendment 2, Amendment 2 summary of changes, and Atch 5-UTSI Map. This amendment establishes the date/time/location for Oppurtunity 1 Mandatory Site Visit (Industry Day)


22 May 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-5.22.26.pdf


26 May 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-5.26.26.pdf


14 Jun 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-6.14.26.pdf


23 Jun 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-6.23.26.pdf


24 Jun 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-6.24.26.pdf



15 Jul 26: The following documents were posted to announce Oppurtunity 2 Industry Day date / location, revise CMMC Requirements, implement the use of 10 U.S.C. 2808a, provide updated Base Agreement Articles, and post Consoritum Q&As.


   - AEDC Velocity Alliance - Request for Whitepaper-Amend 3 - 15 Jul 26.pdf


   - Atch 1 - AEDC Velocity Alliance Program Objectives - 21 Apr 26.pdf


   - Atch 2 - AEDC Velocity Alliance Base Articles - 15 Jul 26.pdf


   - Atch 3 - CMMC-Information.pdf


   - Atch 4 - CMMC-FAQsv6.pdf


   - Atch 5 - AEDC Velocity Alliance Consortium_Q_A-7.15.26.pdf



17 Jul 26 - The following documents were amended:


   - AEDC Velocity Alliance - Request for Whitepaper-Amend 4 - 17 Jul 26.pdf,  modified criteria found in 4.0 Part 1, and 5.0 Part 1


   - Atch 2 - AEDC Velocity Alliance Base Articles - 17 Jul 26.pdf, Article: Cybersecurity Requirements (CUI and CMMC) was revised


   - AEDC Velocity Alliance Consortium_Q_A-7.17.26.pdf was posted.



26 Aug 26 - The following documents were amended:


   - AEDC Velocity Alliance - Request for Whitepaper-Amend 5- 26 Aug 26.pdf - Under Section 4.0, Part 2: Technical Competency, Technical Evaluation #16 was added for Solid Rocket Motors and Components


   - Atch 1 - AEDC Velocity Alliance Program Objectives - 26 Aug 26.pdf - Objective - Solid Rocket Motors and Componets was added



31 Aug 26: Posted Question and Answers received to date in document - AEDC Velocity Alliance Consortium_Q_A-8.31.26.pdf



15 Oct 26: AEDC Velocity Alliance - Request for Whitepaper-Amend 6- 15 Oct 26.pdf posted and will be the basis for evaluating onboarding 3 whitepapers. Atch 2 - AEDC Velocity Alliance Base Articles - 15 Oct 26.pdf was updated by adding the Performer Representation article.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
Federal
Civil/Structural Engineering & DesignThis subcontract for Civil/Structural Engineering and Design supports prime contractors on US Army Corps of Engineers projects focused on bank stabilization and flood risk management in Selma. The scope of work involves the design and engineering of secondary retaining walls, rip-rap toe protection, and 1,000 linear foot soldier-pile walls. Technical requirements include the use of hydraulic analysis tools and geotechnical modeling, the calculation of vertical elevations based on NAVD88, and the design of tie-back systems following PTI recommendations. The selected provider must hold a professional engineering license in the state of Alabama to deliver final budget estimates, specifications, and design plans. This opportunity falls under NAICS code 541330 and is associated with the Department of Defense. Interested parties must respond by October 28, 2026.
US Army Corps Of Engineers

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
Federal
Navy Shore Sustainment Support
Solicitation # N6523626RE088
The Navy Shore Sustainment Support opportunity, solicitation number N6523626RE088, is a pre-solicitation issued by the Niwc Atlantic office of the Department of Defense. This requirement is restricted exclusively to SeaPort-NxG MAC holders, and no other offers will be considered. Interested parties must register for PIEE accounts to receive solicitations and submit proposals. The project falls under NAICS code 541330 and is managed by the primary point of contact, Jessica Glisson, based in North Charleston, South Carolina. A virtual pre-solicitation conference is scheduled for October 21, 2026, at 8:00 am EST via Microsoft Teams. Potential offerors must submit any questions by October 19 at 3:00 pm EST. The response deadline for this opportunity is October 28, 2026, at 8:00 pm EST. Additionally, personnel granted access to Controlled Unclassified Information must sign a Non-Disclosure Agreement with the Department of the Navy and adhere to protection standards outlined in 32 CFR Part 2002 and DoD Instruction 5200.48/5230.24.
Niwc Atlantic

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
Federal
RADIAC AND RADCON PROGRAM PROFESSIONAL SUPPORT SERVICES
Solicitation # N6426726R3014
The Naval Surface Warfare Center, Corona Division, is soliciting professional support services for the Naval Sea Systems Command Radiation Detection, Indication, and Computation (RADIAC) and Radiological Controls (RADCON) Program Offices. This competitive acquisition is restricted to SeaPort-NxG MAC holders and is structured as a Cost-Plus-Fixed-Fee, Level-of-Effort Task Order. The period of performance consists of a one-year base period from March 31, 2027, to March 30, 2028, with four subsequent one-year options extending through March 30, 2032. The scope of work involves providing engineering, logistics, technical writing, IT, and management analyst support to manage the lifecycle of over 40,000 RADIAC instruments and 400,000 dosimeters, as well as overseeing radiation protection programs such as the Radiological Affairs Support Program and the Low Level Radioactive Waste Program. The contract requires a specific labor mix, including a Senior Program Manager and various engineering and IT roles, with mandatory educational and professional experience requirements. Key deliverables include technical manual revisions, product engineering design data, and administrative support via the RADIAC SharePoint portal. Performance will be monitored through a Quality Assurance Surveillance Plan and reported via the Contractor Performance Assessment Reporting System. Award decisions will be based on technical approach, management and personnel strategies, and past performance, with the technical factor carrying the highest relative importance. Security requirements include a Secret facility security clearance and adherence to strict marking standards for classified and controlled unclassified information.
Naval Surface Warfare Center

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541330
New
Federal
NAWCAD WOLF Identification Systems Technical Management Support Services RFO
Solicitation # N0042126R1023
Solicitation N0042126R1023 is a small business set-aside request for proposal issued by the Naval Air Warfare Center Air Division for Identification Systems Technical Management Support Services at the Webster Outlying Field. This firm-fixed-price level of effort task order, managed under the SeaPort-NxG Multiple Award Contract, covers a five-year period of performance consisting of one base year and four option years. The requirement specifies a total of 430,070 direct labor hours to support the organic Lead Systems Integrator model across four core technical areas: technical management, budget execution and N-ERP support, material procurement, and data management, as well as graphics, media, and communications support for various major defense acquisition programs. The contract requires a hybrid work model with a mandate for three days of on-site performance per week at Patuxent River or St. Inigoes, Maryland. Award decisions are based on a non-price rating system where technical capabilities, evaluated through a sample task and key personnel resumes, and past performance are used to determine a highest evaluated threshold, with price serving as the final deciding factor among equal ratings. Contractors must comply with strict security standards, including NISPOM and CMMC requirements, and utilize the Wide Area WorkFlow system for electronic invoicing. Deliverables are managed through a formal Contract Data Requirements List, and performance is monitored via a systematic Contract Surveillance Plan and CPARS evaluations.
Naval Air Warfare Center Air Division

POSTED

about 10 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
Federal
Marketplace for Acquisition of Professional Services (MAPS)
Solicitation # W15P7T-26-R-A006
The Army Contracting Command-Aberdeen Proving Ground is executing the Marketplace for Acquisition of Professional Services (MAPS), an Indefinite-Delivery Indefinite-Quantity (IDIQ) contract designed to consolidate and replace the RS3 and ITES-3S vehicles to streamline the procurement of uncommon knowledge-based professional services for the U.S. Army and other federal agencies. This multi-award contract supports global operations across CONUS and OCONUS, including hostile environments, and spans five primary domains: Engineering, Logistics and Operational Services; Research, Development, Test and Evaluation Services; Management and Advisory Services; Emerging IT Services; and Foundational IT Services. The contract has a total ceiling value of $50 billion over a base five-year period with an optional five-year extension, structured as a Firm Fixed Price arrangement with specific fee caps for Cost-Plus-Fixed-Fee task orders: 5% for non-research work and 7% for experimental, developmental, or research work. The Government will make up to 70 awards per domain, with allocations reserved for 30 Large Businesses (including 15 Emerging Large Businesses), 25 Small Businesses, and 15 Commercial-Sector Vendors, though these numbers may be adjusted without notice. Award decisions are based exclusively on technical rating, with no tradeoffs between cost and non-cost factors, and only the highest-rated technical offerors offering a fair and reasonable price will be selected. Evaluation is weighted heavily toward NAICS alignment, granting 1,000 points per qualifying project that matches a domain-specific NAICS code, with additional scoring for relevance, passthrough rate, vacancy rate, time-to-fill rate, schedule, and completeness. Proposals must be submitted through the Digital Market Portal, adhering to strict formatting rules including single PDF attachments, 5MB file size limits per volume, and specific naming conventions. Offerors must submit qualifying project forms, scorecards, and past performance documentation using the correct amendments based on business size category. Organizational conflict of interest provisions are stringent, requiring disclosure of actual or potential OCI, mandatory non-disclosure agreements for personnel involved in systems engineering or evaluation functions, and potential restrictions on future contracting activities by awardees. Compliance with SAM.gov representations, MIL-STD-130 and MIL-STD-129 marking for uniquely identified items, and DoD Common Access Card requirements for network access are also mandatory. Offerors must ensure their SAM registrations are current, and submissions must be made by the deadline of
W6QK Acc-Apg

POSTED

about 10 hours ago

DEADLINE

in 28 days
View Details
NAICS: 541330
New
Federal
Official RFP - NSWCDD HPM Support Services
Solicitation # N0017826R3107
Nswc Dahlgren

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
Federal
AIR FORCE CRYPTOLOGIC OFFICE COMMERCIAL SOLUTIONS OPENING
Solicitation # FA7037-21-S-C001
The Air Force Cryptologic Office (AFCO) Cyberspace Intelligence Surveillance and Reconnaissance and Multi-Domain Innovation Division is soliciting innovative commercial capabilities through Commercial Solutions Opening FA7037-21-S-C001. The agency is seeking mature technologies and services in Electromagnetic Warfare, Information Operations, and electromagnetic digital communications, with a specific goal of achieving a field demonstration within one year. This solicitation emphasizes the use of novel material approaches and innovative services, including updated references to Super Intelligence. Awards may be issued as contracts or Other Transactions with periods of performance typically ranging from one to five years. The procurement follows a competitive two-phase submission process governed by 10 USC 3458 and DFARS 212.70. Phase I requires the submission of Quad Charts and White Papers, which are evaluated based on technical merit, importance to the AFCO mission, and fund availability. Selected offerors are then invited to Phase II to submit full technical and price proposals. All submissions are treated as commercial items. Offerors must possess the necessary personnel and facility security clearances to perform classified work in accordance with the National Industrial Security Program Operating Manual and DD Form 254. The primary point of contact for this effort is Carissa Heuertz.
Department Of Defense

POSTED

about 10 hours ago

DEADLINE

in 12 months
View Details
NAICS: 541330
New
Federal
Optomechanical Design
Solicitation # 80NSSC27946002Q
The NASA Shared Services Center is seeking capabilities statements for a requirement involving optomechanical design and the delivery of fabricated parts for the Laser Instrument associated with the Landolt mission. Under NAICS code 541330, the government intends to issue a sole source contract to Odyssey Space, LLC, as they have been determined to be the sole provider of these services. The procurement will be conducted as a commercial item or service under FAR Part 12, with the NASA Shared Services Center acting as the procuring center and the NASA Goddard Space Flight Center serving as the location for performance. Interested organizations must submit their capabilities and qualifications in writing to the primary point of contact, Cody Guidry, by 3:00 p.m. Central Standard Time on October 19, 2026. These submissions will be used solely to determine if the procurement should be conducted on a competitive basis. The scope of work includes conducting technical evaluations with the customer prior to fabrication and providing status reports at least monthly. While the primary work is expected to be performed at the vendor's offices, the effort is tied to the NASA Goddard Space Flight Center.
NASA Shared Services Center

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541330
New
SLED
Building Plan Check Services
Solicitation # 20261014083
The City of Tehachapi is soliciting proposals for a qualified firm to provide on-call building construction plan review services. The selected consultant will be responsible for reviewing construction drawings for residential and non-residential projects, including new construction, remodels, additions, and green building projects, to ensure compliance with the California Building Standards Code Title 24 and the California Fire Code. Key deliverables include formal reviews for architectural, structural, mechanical, plumbing, electrical, disabled access, and green building compliance, with the requirement that the firm utilize Accela permitting software. Performance is conducted remotely, with electronic transfer of plans and strict timelines for correction notices: 10 working days for first submissions and 7 working days for resubmissions. The City intends to award a single three-year contract to the most qualified firm, with the possibility of two additional one-year extensions for a maximum term of five years. Payment is based on time and materials, and the City prefers a percentage-based rate proposal tied to the amount of plan check fees collected per project. Proposals must be submitted by November 17, 2026, and include a letter of introduction, firm qualifications, resource capabilities, and a detailed fee schedule. The selected consultant must maintain comprehensive general liability insurance of at least 1 million dollars per occurrence, as well as automobile and workers compensation coverage.
City of Tehachapi

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
SLED
Wastewater Treatment Optimization and Nitrogen Removal EngineeringThis subcontract for the County of San Luis Obispo involves providing specialized wastewater process engineering services to support prime contractors on water management projects. The scope of work focuses on evaluating treatment system contributions to effluent salts, developing recommendations for nitrogen removal optimization, and identifying effective source control measures. The final deliverable for this engagement is a Technical Memorandum detailing recommended projects and management strategies. Qualified candidates must possess a Professional Engineer license in either Civil or Environmental engineering and demonstrate proficiency in process simulation software, such as BioWin. The work will be performed in San Luis Obispo, California, under NAICS code 541330. Interested parties must submit their responses by the deadline of October 26, 2026.
County of San Luis Obispo

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
SLED
CSA 18 Salt And Nutrient Management Plan
Solicitation # 1996
The County of San Luis Obispo is soliciting proposals under Informal RFP 1996 for engineering and hydrogeological services to develop and implement a Salt and Nutrient Management Plan (SNMP) for the CSA 18 Wastewater Treatment Plant. The primary goal is to reduce the mass loading of salts and nitrogen species in treated effluent to ensure compliance with effluent limitations and meet the expectations of the Regional Water Quality Control Board. The project involves several key deliverables, including a comprehensive report outline, technical memoranda on agronomic uptake and salt contributors, and the production of a 90 percent draft and final SNMP. The contract is intended to span three years from the date of award, with a target date of September 2027 for submitting the final draft to the regulatory board. Proposals must be submitted in Adobe PDF format by 3:00 p.m. on October 23, 2026, and should be limited to five pages, excluding the cover letter, cost proposal, and resumes. The selection process includes a local vendor preference when quality and service factors are equal. Awardees must comply with strict nondiscrimination laws, including the Americans with Disabilities Act of 1990 and the Fair Employment and Housing Act, and must certify they are not targets of economic sanctions under Executive Order N-6-22. The successful proposer will be required to execute a contract based on the provided sample agreement and provide evidence of meeting County insurance requirements. Cost proposals must be submitted separately and include total fixed fees and detailed billing rates for key personnel.
County of San Luis Obispo

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
SLED
Groundwater Modeler / Storage Analysis SpecialistThis subcontract for a Groundwater Modeler / Storage Analysis Specialist involves performing quantitative analysis of groundwater storage for prime contractors working on environmental projects for the County of San Luis Obispo. The selected specialist will utilize the existing GSP groundwater model and average storage coefficient values to analyze storage changes. A primary requirement of the role is the preparation of a Groundwater Storage Sensitivity Analysis, conducted in accordance with DWR guidelines, to pinpoint error sources and data gaps. The final deliverables for this engagement include formal change in groundwater storage maps and a detailed Sensitivity Analysis appendix. The work is centered in San Luis Obispo, California, under NAICS code 541330. Interested parties must respond by October 29, 2026.
County of San Luis Obispo

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

NAICS: 334418
New
Federal
PC 104 Single Board Computer
Solicitation # FA9101_PC104_SingleBoardComputer
The Department of Defense, through the FA9101 Aedc Pkp Procurement Branch, is soliciting quotes for the procurement of two PC 104 Single Board Computers and associated hardware to support the 746th Test Squadron. Specifically, the requirement includes two ENETX-MA4-2F4 Converter Appliances and four corresponding interface cable assemblies for power, MIL-STD-1553, and ARINC-429 communications. These components are critical for the integration, maintenance, and troubleshooting of the Ultra High Accuracy Reference System and customer Units Under Test. The hardware must be genuine OEM Alta dt parts and comply with VITA 47 and MIL-STD-810 standards, requiring 5-32 VDC conditioned power. This is a firm-fixed-price contract set aside for small businesses and women-owned small businesses, with a specific price evaluation preference for HUBZone small business concerns. Award will be granted to a responsible source that is technically acceptable and provides a fair and reasonable price. Deliveries are specified as FOB Destination to Holloman AFB, New Mexico, with a required delivery schedule of 10 weeks from the date of award receipt. Contractors must utilize the Wide Area WorkFlow system for electronic invoicing and adhere to MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification. Quotes must be submitted electronically by October 28, 2026, and must be divided into administrative/price and technical capability sections.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 811310
New
Federal
Mazak Repair 655
Solicitation # FA9101MR655
Solicitation FA910127QB001 is a firm-fixed-price requirement issued by the Department of the Air Force for the repair of a Mazak MTV 655/80N Vertical Machining Center located at Holloman Air Force Base, New Mexico. The scope of work requires the contractor to provide all personnel, equipment, and genuine OEM parts to replace the 6K RPM spindle cartridge and rebuild the gearbox to original equipment manufacturer specifications. Following the repairs, the contractor must perform full system calibration of home positions and tool measurement systems, followed by operational testing to demonstrate full functionality for government acceptance. This is a restricted competition sole-source procurement intended for Magnum Precision Machines, the authorized regional distributor and certified service provider for Mazak Corporation. The contract requires a minimum one-year warranty on all parts and labor, with a total performance period of 90 calendar days after receipt of order. Award will be based on technical acceptability and fair and reasonable pricing, with a 10 percent price evaluation preference applied to HUBZone small business concerns. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
Federal
Anthropomorphic Test Device (ATD) Sustainment Parts and Factory Calibration Services
Solicitation # FA910129RB003
The United States Air Force is conducting market research to identify qualified sources capable of providing brand-new, OEM-certified replacement parts and specialized factory calibration and diagnostic services for next-generation Anthropomorphic Test Devices, specifically the Case-1 Lightest Occupant in Service and Case-6 Large Anthropomorphic Research Dummy configurations. The scope of work includes the delivery of precision structural and skeletal hardware, internal data acquisition harnesses, and the calibration of proprietary instrumentation such as Slice 6 systems, angular rate sensors, and multi-axis load cells. A critical requirement is the ability to provide a fast turnaround for services, with a target of thirty calendar days from receipt. While the government currently considers this a potential sole-source acquisition from Humanetics Innovative Solutions, Inc., this request for information seeks to determine if other businesses possess the necessary proprietary design rights, technical data, and ISO/IEC 17025 or NIST traceable certifications to fulfill these needs. Interested parties must submit a capability statement detailing their business information, technical expertise regarding component interchangeability, and their ability to integrate with Governmentwide Purchase Card ordering mechanisms. This notice is for planning purposes only and does not constitute a formal solicitation or request for proposal.
Other Measuring and Controlling Device Manufacturing

POSTED

5 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 113310
Federal
2027 Timber Harvest Arnold AFB, TN
Solicitation # FA910126QB076_2027_Timber_Sale_ArnoldAFB
Solicitation FA910126QB076 is a request for quotes for the FY 2027 Timber Harvest Sale at Arnold Air Force Base, Tennessee. This project is a 100 percent Total Small Business Set-Aside, specifically designated for Women-Owned Small Businesses under NAICS 113310. The scope of work involves a complete harvest of all merchantable timber across approximately 40.5 acres, including estimated quantities of 763 tons of pine saw-timber, 756 tons of pine pulpwood, 91,200 board feet of hardwood saw-timber, and 314 tons of hardwood pulpwood. The period of performance is twelve months, running from October 16, 2026, to October 15, 2027. This is a pay-as-cut firm fixed price contract where the government will award the contract to the responsible quoter offering the highest total estimated monetary return. Evaluation is based on an inverted Lowest Price Technically Acceptable methodology, requiring a pass/fail technical assessment of the quoter's Tennessee Master Logger certification, insurance coverage, and ability to provide a 2,000 dollar performance bond. While a site visit was held on September 24, 2026, Amendment 0002 rescinded the mandatory attendance requirement. All submissions are due by October 16, 2026, with an anticipated award date of October 23, 2026. Contractors must adhere to strict payment and documentation standards, with payments made weekly via certified check, cashier's check, or postal money order payable to Arnold Air Force Base. Required documentation includes weight tickets from certified scales and scaling based on the Doyle Log Scale for hardwoods and Scribner Scale for pine. Insurance requirements include a minimum of 1,000,000 dollars in Commercial General Liability and active Tennessee Workers Compensation coverage. Additionally, the solicitation requires CMMC Level 1 compliance and adherence to specific cybersecurity and telecommunications representations.
Logging

POSTED

15 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 541330
Federal
Request for Whitepaper - AEDC Facility Digital Twins and Predictive Analytics
Solicitation # FA910126RWP-DigitalTwins
The Department of the Air Force is seeking innovative solutions through a Request for Whitepapers to establish an Other Transaction Agreement under 10 U.S.C. 4022 for the creation of high-fidelity 3D digital twins and predictive analytics for the Arnold Engineering Development Complex (AEDC). This multi-year prototype project aims to modernize facility documentation, beginning in Fiscal Year 2027 with the Von Karman Gas Dynamics Facility (VKF) and eventually scaling to over 2.5 million square feet of infrastructure. Technical requirements specify engineering-grade models with a minimum Level of Detail (LOD) of 350, though LOD 400 is highly desired for primary connection points. Deliverables must maintain a dimensional accuracy of +/- 1/4 inch and utilize Autodesk Revit for architectural and structural models and Autodesk Plant PDM for intelligent process models. Because this is an Other Transaction Agreement, it is not subject to the Federal Acquisition Regulation, though it requires compliance with 31 U.S.C. 1352 and DPAS regulations. All work must be performed within the continental United States by U.S. citizens, and all project data must be handled as Controlled Unclassified Information (CUI). Performers must maintain active SAM registration, Joint Certification Program (JCP) certification, and meet CMMC Level 2 self-assessment standards by November 10, 2026. Evaluation of submissions will be based on technical merit, program management, scalability, cost realism, and cybersecurity compliance. Pricing must be structured as firm, fully priced milestones for the base phase with separate estimates for option phases.
Engineering Services

POSTED

about 1 month ago

DEADLINE

in 6 days
View Details
NAICS: 238210
Federal
High-Voltage Electrical Infrastructure UpgradesThis subcontract for High-Voltage Electrical Infrastructure Upgrades supports Air Force AEDC facility projects by upgrading high-voltage substations exceeding 6.9kV and installing medium-voltage distribution networks. The scope of work involves the installation of high-voltage transformers, switchgear, and medium-voltage cabling specifically designed to power large industrial motors. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the project requires strict adherence to high-voltage safety standards and NETA certifications to ensure the delivery of fully operational infrastructure. The contract falls under NAICS code 238210 and has a response deadline of September 30, 2030.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 months ago

DEADLINE

in almost 4 years
View Details
NAICS: 238220
Federal
Low-Pressure Process Piping InstallationThis subcontract involves the design, fabrication, and installation of low-pressure process piping systems, specifically those rated at or below 150 PSIG, for prime contractors working on Air Force AEDC facility projects. The scope of work includes the installation of piping for various gas and fluid media, with all testing and turnover procedures conducted in accordance with ASME B31.3 industry standards. Managed by the Department of Defense under the FA9101 Aedc Pkp Procrmnt Branch, the contract falls under NAICS code 238220. The project requires the delivery of fully installed and tested low-pressure piping systems, with a response deadline set for September 30, 2030.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 2 months ago

DEADLINE

in almost 4 years
View Details
NAICS: 238220
Federal
High-Pressure & Hazardous Process Piping InstallationThis subcontract with the Department of Defense, specifically the Air Force AEDC facility, involves the design, fabrication, and installation of complex high-pressure and hazardous process piping systems. The scope of work focuses on systems exceeding 150 PSIG and requires strict adherence to ASME B31.3 standards, encompassing all testing and turnover processes. The project demands specialized welding certifications for high-pressure systems and the implementation of hazardous material containment. Under NAICS code 238220, the contractor is responsible for delivering fully installed and certified piping systems for prime contractors. The response deadline for this opportunity is September 30, 2030.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 2 months ago

DEADLINE

in almost 4 years
View Details
NAICS: 541330
Federal
Advanced Mechanical Engineering ServicesThe Advanced Mechanical Engineering Services subcontract supports prime contractors on Air Force AEDC projects by providing conceptual planning, detailed design, and analysis of non-standard mechanical components. The scope of work includes performing trade studies, cost estimates, and verification and validation specifically for high-pressure and high-temperature applications. To ensure technical compliance and quality, the contractor must hold a Professional Engineer license. Beyond design, the contractor is responsible for managing the procurement and fabrication processes to deliver complete engineering design packages and validated components. This effort is managed under the Department of Defense through the AEDC Pkp Procurement Branch, falling under NAICS code 541330. The contract period extends through September 30, 2030.
Engineering Services

POSTED

about 2 months ago

DEADLINE

in almost 4 years
View Details
NAICS: 811310
Federal
Industrial Equipment Repair & OverhaulThis subcontract, titled Industrial Equipment Repair and Overhaul, is issued by the Department of Defense through the FA9101 Aedc Pkp Procrmnt Branch. The project focuses on the overhaul and repair of major rotating industrial equipment, specifically motors, pumps, and compressors, for prime contractors operating at Air Force AEDC facility projects. The scope of work includes disassembly, inspection, root cause failure analysis, and reassembly, all performed in strict accordance with Original Equipment Manufacturer specifications to ensure the delivery of validated equipment. This effort falls under NAICS code 811310, with a response deadline set for September 30, 2030.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 2 months ago

DEADLINE

in almost 4 years
View Details
NAICS: 238220
Federal
Specialized Fire Suppression Systems InstallationThis subcontract involves the design, installation, and testing of specialized fire suppression systems for prime contractors working on Air Force AEDC facility projects. The scope of work includes performing hazard analyses and installing deluge, foam, or clean agent systems using specific chemicals and equipment. All work must strictly adhere to NFPA codes to ensure the delivery of certified and tested fire suppression systems. Managed by the Department of Defense under the FA9101 Aedc Pkp Procurement Branch, the project falls under NAICS code 238220. The contract was posted on August 31, 2026, with a response deadline set for September 30, 2030.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 2 months ago

DEADLINE

in almost 4 years
View Details
NAICS: 237310
Federal
Site-Wide Utility Distribution InstallationThis subcontract for the Department of Defense, managed by the FA9101 AEDC Pkp Procurement Branch, involves the installation and maintenance of site-wide utility systems including water, steam, and gas for prime contractors at Air Force AEDC facilities. The scope of work encompasses trenching, pipe laying, and system tie-ins based on distribution capacity analysis, utilizing specialized excavation equipment and utility piping to deliver a fully operational distribution network. All work must be performed in strict accordance with local and federal utility codes. The project falls under NAICS code 237310 and has a response deadline of September 30, 2030.
Highway, Street, and Bridge Construction

POSTED

about 2 months ago

DEADLINE

in almost 4 years
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS