Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RESERVOIR, WINDOW WA

Active
SPE7L4-26-T-5739Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item is a RESERVOIR, WINDOW WA with NSN 2540-01-669-8155, available exclusively through Oshkosh under part number 14009A0698, with a quantity of one unit and a delivery requirement of 20 days after award. The procurement is governed under solicitation SPE7L4-26-T-5739, issued by the Department of Defense’s LSO Combat Vehicles and Armament office, with a response deadline of August 3, 2026, and performance to occur at Camp Pendleton, California. The contract incorporates stringent technical and quality standards referenced from the DLA Master List, with compliance tied to the version in effect on the solicitation or award date depending on acquisition size. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and the item is subject to covered defense information protocols. Packaging must meet DLA specifications, and configuration changes require formal engineering change proposals or variance requests. Inspection and acceptance occur at the manufacturer’s origin, with strict rules on removal of government identification from non-accepted items. Technical data associated with the item is controlled under ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons anywhere, even within the U.S., and applies to all entities including subsidiaries. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA-approved questionnaire clearance.

General Info

One reservoir, NSN 2540-01-669-8155, Oshkosh part 14009A0698, delivery in 20 days, ITAR/EAR controlled, CMMC Level 2 required.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

336360 - Motor Vehicle Seating and Interior Trim ManufacturingView NAICS

Place of Performance

BOX 555351, CAMP PENDLETON, CA, 92055-5351, US

Set-Aside

NONE

Documents

(1)

SPE7L4-26-T-5739.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESERVOIR,WINDOW WA
RESERVOIR,WINDOW WASHER EXCEPTION This item is available through Oshkosh (75Q65) under part number 14009A0698
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire
SPE7L4-26-T-5739
SECTION B
(both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2540-01-669-8155 Quantity: 1 EA Purchase Request: 7017573989QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336360
New
DIBBS
MIRROR HEAD, VEHICULThe contract is for one mirror head, vehicle part identified by NSN 2540-01-737-5106 and purchase request 7017554644, with a required delivery in ten days from the award date. Delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, cushioning, and unit containerization, with marking strictly following MIL-STD-129 and the special fragile indication. Palletization adheres to DLA packaging requirements, and shipment must avoid parcel post, instead using fast, traceable freight methods. The freight destination is Al Dhafra Air Base in the United Arab Emirates, while the parcel post address is in Tampa, Florida, though the latter is not to be used. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on the acquisition size. The contract is issued under solicitation SPE7L4-26-T-5740 with a response deadline of August 3, 2026, under NAICS code 336360, managed by the Department of Defense’s Combat Vehicles and Armament office. The original required delivery date is July 16, 2026, and government-use codes indicate advanced distribution and specific handling directives.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STOWAG
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
Federal
25--BOX,ACCESSORIES STOWAG
DLA Land And Maritime

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
Supply of AI-Enabled Gearbox AssemblyThe Defense Logistics Agency, under the Department of Defense, has issued a subcontract for the procurement and delivery of a specialized AI-enabled gearbox assembly identified by NSN 1680016521524, manufactured under NAICS code 336360. The contract requires full compliance with federal supply standards and mandates the flow-down of non-discrimination clauses to all tiers of subcontractors, ensuring adherence to federal equal opportunity and employment practices. Delivery must meet stringent military specifications for performance, reliability, and integration within defense systems, with the place of performance and logistical details not explicitly defined but implied to support DoD operational needs. The solicitation, posted on July 21, 2026, is designated as a subcontract and does not include a set-aside classification, indicating it is open to competition without preference for small businesses or other socioeconomic categories. The contract reference number SPE4A726P4303 is accessible via the DIBBS system, and while no point of contact or specific delivery location is listed, the requirement centers on a high-tech mechanical component enhanced with artificial intelligence capabilities, intended for use in critical defense applications. All parties must ensure the system meets technical, regulatory, and compliance benchmarks established by federal acquisition protocols.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
Pneumatic Vehicle Tire Supply for Military UseThe contract pertains to the supply of pneumatic vehicle tires designated by NSN 2610015060391 and part number 03424, manufactured to meet military specifications for durability, performance, and safety in operational environments. All tires must be packaged in strict accordance with ASTM D3951 standards to ensure protection during transit and storage, and labeled precisely as required by MIL-STD-129 to guarantee traceability and compliance with Department of Defense inventory systems. Delivery is specified to the Defense Logistics Agency depot located in Texarkana, Texas, serving as the primary distribution point for military logistics. The contract is structured as a subcontract under the NAICS code 336360, indicating classification within the automotive parts manufacturing sector, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 21, 2026, and while no specific set-aside designation is provided, the procurement supports critical defense supply chain operations requiring adherence to federal and military quality standards.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
Pneumatic Vehicular Tire Supply for Military LogisticsThe contract entails the supply and delivery of four units of pneumatic vehicular tires that meet strict military specifications, ensuring durability, performance, and reliability under demanding operational conditions. Each tire unit must be properly packaged and labeled in accordance with required military standards to facilitate handling, storage, and inventory management throughout the logistics chain. Shipping is arranged under FOB destination terms, meaning the supplier retains responsibility for the tires until they reach the designated delivery point, at which risk and ownership transfer to the recipient. The procurement is managed under the Defense Logistics Agency, a division of the Department of Defense, and falls under the NAICS code 336360 for tire manufacturing. The contract is classified as a subcontract, indicating it supports a larger acquisition or program within the military logistics framework. The solicitation was posted on July 21, 2026, and while no specific delivery location or point of contact is listed, the performance and compliance obligations are tightly bound to DoD requirements, emphasizing quality control, traceability, and timely fulfillment to sustain military readiness.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
Aircraft Pneumatic Tire SupplyThe contract entails the supply of two units of pneumatic aircraft tires identified by NSN 2620014554869, specifically tailored to meet military packaging and labeling requirements to ensure compatibility with defense logistics protocols. The tires are to be delivered to Naval Air Station Whidbey Island, indicating their intended use for military aviation operations. The sourcing is managed under a subcontract arrangement through the Defense Logistics Agency, which operates under the Department of Defense, and the procurement is classified under NAICS code 336360, corresponding to aircraft tire manufacturing. The posting date of July 21, 2026, suggests this is a forward-looking acquisition, likely part of routine inventory replenishment or operational readiness planning. All compliance aspects, including proper documentation and packaging standards, must align strictly with DoD specifications to ensure seamless integration into the military supply chain.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
Pneumatic Vehicle Tire Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
Pneumatic Vehicular Tire Supply (NSN 2610015037543)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
Pneumatic Vehicular Tire Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
PUMP, WINDOW WASHERThe contract is for the procurement of one window washer pump with NSN 2540-99-930-8125 and part number 714/20600 from J.C. Bamford Excavators Limited, under solicitation SPE7L4-26-T-5733. The requirement is for delivery within ten days FOB origin with zero variance in quantity, and the item must be shipped by the fastest traceable means, explicitly excluding parcel post. All packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, containerization, and palletization as defined by DLA packaging standards, and marking must adhere to MIL-STD-129 with no special markings required. Inspection and acceptance occur at the destination point, and the delivery will be made to Fort Eustis, Virginia. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are treated as major. The unit of issue is each (EA), and the contract references the DoD authorized unit of issue system. The Government's point of contact is Anna-Rachelle Betts, and the item is destined for use under Project TP 2 with a required delivery date of July 17, 2026. The contract includes additional government-specific identifiers for tracking, including a transportation control number and distribution codes, and is issued under the NAICS code 336360 for the Department of Defense.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336360
New
DIBBS
COUPLER, DRAWBAR, RINGThe contract is for the procurement of a COUPLER, DRAWBAR, RING with NSN 2540013825836 and OSHKOSH DEFENSE LLC part number 1864550, under solicitation SPE7L4-26-U-0921. A total of 108 units are required at a unit price of $108.00, with delivery due within 92 days FOB origin, and no quantity variance allowed. The contract is a total small business set-aside under NAICS code 336360, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications including ASTM D3951. The product must not contain Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must comply with DLA’s RP001 requirements, MIL-STD-129 labeling, and either Fed-Std-313 for hazardous materials under TQ requirement IP025 or ASTM D3951 for non-hazardous items, with palletization adhering strictly to DLA packaging standards. Inspection and acceptance occur at the destination, and all packaging must specify the correct Unit of Issue and Quantity per Unit Pack as outlined in the contract. The solicitation closed on July 24, 2026, with Heather Kessler as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 339991
New
DIBBS
SEAL, GAS TURBINEThe contract is for 519 gas turbine seals, identified by NSN 5330-00-615-0656, under solicitation SPE7L4-26-U-0988, with a total small business set-aside and a NAICS code of 339991. Delivery is required within 91 days of award, and responses must be submitted by August 6, 2026. All items must comply with technical and quality requirements referenced in the DLA Master List, which governs specifications based on the solicitation or award date depending on acquisition size. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals not explicitly authorized must be submitted for approval. Mercury and mercury-containing compounds are banned from intentional addition or direct contact with hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and certain chemical reagents outlined by NAVSEA, with portable devices required to be shock-proof and have a secondary containment. The product must be free of asbestos, and any alternative materials must meet the approval criteria under Clause L30. Government identification must be removed from non-accepted supplies, and packaging must adhere to DLA standards. Covered defense information may apply. The contract is managed by the Department of Defense through the LSO Combat Vehicles and Armament office, with Heather Kessler listed as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
ROD, STRAIGHT, HEADLEThe contract is for the procurement of four straight, headless rods identified by NSN 5340015185562 and part number 6100110-001, with a unit price of $4.00 per unit and a total price of $16.00. Delivery is required within five days of contract award, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the point of origin, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container codes. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA packaging guidelines. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The shipment must be delivered to the Canadian Forces Supply Depot in Montreal, with freight address and contact details provided for logistics coordination. The solicitation number is SPE7L4-26-T-5738, posted on July 22, 2026, with a response deadline of August 3, 2026, and the required delivery date is July 24, 2026. The contract falls under NAICS code 332510 and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336330
New
DIBBS
HOUSING, STEERING CO
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332999
New
DIBBS
Manufacture and Supply of MAPBOARD ASSEMBLYThe contract requires the manufacture, testing, labeling, packaging, and delivery of eight units of a MAPBOARD ASSEMBLY identified by NSN 2540013713202, strictly in accordance with military specifications and the provided technical data package. The work must be completed and shipped FOB origin to DLA Distribution in New Cumberland, Pennsylvania, with a firm ship date of November 4, 2025, ensuring timely compliance with operational readiness requirements. The procurement is classified as a subcontract under the NAICS code 332999, indicating it falls under miscellaneous manufacturing, and is managed by the Department of Defense through the LSO Combat Vehicles and Armament office. The solicitation was posted on July 21, 2026, with responses due by July 24, 2026, suggesting this is a pre-positioned or recurring acquisition to support existing defense systems. All deliverables must meet rigorous defense standards, and successful performance hinges on adherence to technical precision, quality control, and strict adherence to the scheduled delivery timeline.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
MIRROR ASSEMBLY, REAThe contract pertains to the procurement of a MIRROR ASSEMBLY, REA with NSN 2540015578319 and part number 613561, under solicitation SPE7L4-26-U-0985. The requirement is for 61 units at a unit price of $61.00, totaling $3,721.00, with delivery required within 14 days FOB origin. The contract specifies strict adherence to DLA packaging requirements, including compliance with MIL-STD-129 for marking and labeling, and packaging must conform to either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if classified as hazardous per FED-STD-313. All packaging and palletization must align with RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT, and the DLA Master List of Technical and Quality Requirements supersedes any conflicting industry standards. Inspection and acceptance occur at the destination point, with zero variance allowed in quantity. This is a total small business set-aside under NAICS code 336390, managed by the Department of Defense’s LSO Combat Vehicles and Armament office. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026. The unit of issue is each (EA), and the contract explicitly states that the quantity listed is an estimate and may not be fully purchased by the IDC. Primary point of contact is Heather Kessler, with provided phone and email for inquiries. The contract is accessible via the DIBBS system, and all technical and quality specifications referenced are drawn from the DLA Master List, with revisions governed by the solicitation issue date or any subsequent amendment.
Other Motor Vehicle Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGThe contract is for the procurement of a rigid connecting link with NSN 3040-01-453-7810 and part numbers 17B9F1112-551 from The Boeing Company and 4609-551 from Tyee Aircraft Inc, under solicitation SPE7L4-26-U-0984. The item is classified as a critical application component for military use and is subject to stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. The contract specifies a quantity of 15 units at a unit price of $15.00, for a total value of $225.00, with zero variance allowed in quantity. Delivery is required within 259 days FOB origin, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-129 for marking and labeling, palletization must adhere to RP001 DLA Packaging Requirements, and all packaging must also meet ASTM D3951 unless overridden by the DLA Master List. The item is procured under DLA Direct CONUS coverage, and the unit of issue is each. The contract was posted on July 21, 2026, with proposals due by August 5, 2026, under NAICS code 333613, and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Heather Kessler as the point of contact.
Mechanical Power Transmission Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
MOTOR, WINDSHIELD WIPERThe contract pertains to the procurement of one electric windshield wiper motor, identified by NSN 2540-01-662-1910 and part number 14009A0983, supplied by OSHKOSH DEFENSE LLC under solicitation SPE7L4-26-T-5732. This is a critical application item with strict compliance requirements, including adherence to the DLA Master List of Technical and Quality Requirements, which supersedes any other standards such as ASTM D3951. The item must be packaged according to DLA Packaging Requirements, labeled per MIL-STD-129, and palletized accordingly, with hazardous material handling governed by TQ requirement IP025 if applicable. Delivery is required within 20 days from the contract award, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The designated delivery point is the Distribution Management Office at Camp Lejeune, NC, and the item must be shipped via traceable freight, explicitly prohibiting parcel post. The required delivery date is July 16, 2026, and the contract includes specific government-only identifiers and operational codes for logistics tracking. The point of contact for inquiries is Anna-Rachelle Betts, with all correspondence routed through the DLA procurement system.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
MAPBOARD ASSEMBLYThe MAPBOARD ASSEMBLY contract under solicitation SPE7L4-26-T-5272 specifies the procurement of eight units of a critical application item defined by multiple Army drawings, with final finish requirements governed by DCSC drawing 16236 CS-2300-0001 to ensure compliance with Chemical Agent Resistant Coating (CARC) and high-temperature coating standards. All materials must adhere to stringent technical and quality mandates incorporated from the DLA Master List of Technical and Quality Requirements, and the use of Class I ozone-depleting chemicals is strictly prohibited. The item must be manufactured and assembled in full compliance with TDP Rev A Gen 1 specifications tied to reference drawings with identified revisions, and packaging must follow MIL-STD-2073-1E and SPI AK13713202 Revision A, including marking per MIL-STD-129 and palletization per DLA requirements. The contract enforces inspection and acceptance at origin, with no quantity variance allowed, and delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of November 4, 2025. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandatory, and all suppliers must ensure no government identification remains on non-accepted supplies. The contract is subject to full and open competition under a NAICS code of 336390, with delivery due within 113 days of award and a total contract value of $8.00 per unit.
Other Motor Vehicle Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details