RESISTOR ASSEMBLY

RESISTOR ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
L3HARRIS MARITIME POWER & ENERGY 30086 P/N 783049 ITEM 235
L3HARRIS MARITIME POWER & ENERGY 30086 P/N 784572K01
ASRC FEDERAL FACILITIES LOGISTICS, LLC 79343 P/N 784572K01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019024972 0001 EA 8.000
NSN/MATERIAL:5905017224150
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M5-27-T-2641
SECTION B
PR: 7019024972 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-39032, FOR RESISTORS.
ZZ = MOP BASED ON ELECTROSTATIC DISCHARGE (ESD) STATUS:
1. ALL ESD SENSITIVE ELETRONIC DEVICES ARE REQUIRED TO BE PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD OF PRESERVATION CODE "GX" - NO WAIVERS OR DEVIATIONS PERMITTED. USE ONLY AUTHORIZED AND APPROVED PACKAGING MATERIALS (SEE DLA MASTER LIST OF TECHNICAL QUALITY REQUIREMENTS, RP001 FOR DETAILS).
2. FOR NON-SENSITIVE ELECTRONIC DEVICES, METHOD OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN ELECTROSTATIC
DISCHARGE (ESD) SENSITIVE DEVICE AND/OR SUSCEPTIBLE
TO ELECTROMAGNETIC INTERFERENCE (EMI), THEN:
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
SPE7M5-27-T-2641
SECTION B
PR: 7019024972 PRLI: 0001 CONT’D
DO NOT SHIP OR STORE NEAR STRONG ELECTROSTATIC<(>,<)>
ELECTROMAGNETIC, MAGNETIC, CORROSIVE, OR
RADIOACTIVE FIELDS.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ELECTROSTATIC DISCHARGE CONTROL PROGRAM
FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS<(>,<)>
ASSEMBLIES AND EQUIPMENT SHALL BE IN ACCORDANCE
WITH MIL-STD-1686, CLASS 1 OR EOS/ESD S20.20 AND
MIL-HDBK-263 OR EOS/ESD TR20.20.
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
ALL ITEMS AND PACKAGES SHALL BE HANDLED, PACKAGED,
AND OPENED AT AN APPROVED ESD WORKSTATION -OR
FIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705, TYPE I
(MIL-STD-2073-1E, PARAGRAPH 5.2.4.1 AND APPENDIX J,
TABLE J.Ia, Code GX).
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING, HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/04/2027 Original Required Delivery Date:12/08/2027
SPE7M5-27-T-2641 NSN/Part Number: 5905-01-722-4150 Quantity: 8 EA Purchase Request: 7019024972QTY: 8 Delivery: 168 days ADO