Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

RESISTOR NETWORK, FIXED

Open
SPE7M5-27-T-2905Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

Place of Performance

BLDG A2530 2510 TAYLOR STREET BAY 2, FORT BRAGG, NC, 28310-0000, USA

Set-Aside

NONE

Documents

1
PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION
Office AddressUSA
Contacts
Jeanette Heisey
Sign up to see this detail
Sign up to see this detail

Full Description

Show more
RESISTOR NETWORK,FIXED,FILM
RESISTOR NETWORK,FI
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
BOURNS INC 32997 P/N 4610X-101-154LF
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019140189 0001 EA 1.000
NSN/MATERIAL:5905016040709
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NB CUSH/DUNN THKNESS:A
SPE7M5-27-T-2905
SECTION B
PR: 7019140189 PRLI: 0001 CONT’D
UNIT CONT:B9 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals. ZZ ADDITIONAL SPECIAL MARKING: 39 ESD sensitive electronic device requirements of MIL-STD-129 apply UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit
SPE7M5-27-T-2905
SECTION B
PR: 7019140189 PRLI: 0001 CONT’D
boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
BULK BREAK POINT:
W36LKH
0407 CS BN CO A DISTRIBUTI
AWCF SSF SSA
BLDG A2530 2510 TAYLOR STREET BAY 2
FORT BRAGG NC 28310-0000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W36LKH
0407 CS BN CO A DISTRIBUTI
AWCF SSF SSA
BLDG A2530 2510 TAYLOR STREET BAY 2
FORT BRAGG NC 28310-0000
US
MARKFOR
W36LKH
0407 CS BN CO A DISTRIBUTI
AWCF SSF SSA
BLDG A2530 2510 TAYLOR STREET BAY 2
FORT BRAGG NC 28310-0000
US
M/F: (TCN) W36LKH62880050
RDD: 777
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:11/12/2026
SPE7M5-27-T-2905 NSN/Part Number: 5905-01-604-0709 Quantity: 1 EA Purchase Request: 7019140189QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
Manufacturing of Electrical Filter Assemblies (P/N 478975-01)This subcontract involves the manufacturing of Electrical Filter Assemblies for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider will be responsible for fabricating filters according to BAE Systems Controls Inc. part number 478975-01 and TDP Rev A Gen 1 specifications, including the assembly of components designated as Critical Application Items. The final deliverable consists of completed and inspected filter assemblies. To qualify for this effort, contractors must possess Engineering Source Approval from the Government Design Control Activity and complete a CMMC Level 2 Self-Assessment. The project falls under NAICS code 334416 and is managed under the Department of Defense. Responses are due by December 14, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 334416
New
DIBBS
FILTER ASSEMBLY, ELECTRICAL
Solicitation # SPE7L1-27-R-0014
Solicitation SPE7L1-27-R-0014 is for the procurement of 45 units of an electrical filter assembly, designated as a critical application item with NSN 5915-01-353-6609 and BAE Systems Controls Inc. part number 478975-01. The contract requires delivery within 475 days ADO to DLA Distribution Warner Robins in Georgia, with both inspection and acceptance occurring at the destination. The award will be based on best value, evaluating price, past performance via the Supplier Performance Risk System, and proposed delivery schedules. The contractor must adhere to strict technical and quality standards, including a CMMC Level 2 self-assessment and the prohibition of Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-129 and MIL-STD-130, with specific requirements for hazardous materials under FED-STD-313 and non-hazardous materials under ASTM D3951. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the provision of unique entity identifiers and CAGE codes during the offer process.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 334416
New
DIBBS
HOLDER, RESISTOR
Solicitation # SPE7M5-26-T-525H
Solicitation SPE7M5-26-T-525H is a request for quotations issued by the Department of Defense, DLA Land and Maritime, Active Devices Division, for the procurement of 22 resistor holders. The items are identified by NSN 5905007030861 and part number 9893953G002 from AMETEK Inc. The required delivery date is February 6, 2027, with a need ship date of March 23, 2027. Delivery is to be made to the DLA Distribution Depot Oklahoma at Tinker AFB, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-129 for general marking and IPC/JEDEC J-STD-609 for identifying lead and lead-free attributes on individual unit packs. Packaging must comply with MIL-STD-2073-1E and RP001 for palletization. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of covered defense telecommunications equipment. Quotes must be submitted via the DIBBS system.
ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M2-27-T-0650
Solicitation SPE7M2-27-T-0650 is a fixed-price, small business set-aside request for quotation issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 134 fixed electrolytic capacitors (NSN 5910-01-199-4140). This critical application item is identified as a commercial product and must comply with basic specification MIL-PRF-39018/1J Revision J and reference specification MIL-PRF-39018G. The required delivery date is June 25, 2027, with a need ship date of April 26, 2027, for delivery to DLA Distribution Warner Robins in Georgia. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to military standards for preservation, packaging, and marking, specifically MIL-DTL-39028, MIL-STD-2073-1E, and MIL-STD-129. Additionally, contractors must apply lead and Pb-free attribute markings to individual unit packs in accordance with IPC/JEDEC J-STD-609. Environmental and safety restrictions prohibit the intentional addition of mercury to the hardware, and hazardous materials must be labeled per the Hazard Communication Standard and DFARS 252.223-7001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and compliance with the Buy American Act and various cybersecurity regulations.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECT
Solicitation # SPE7M5-27-T-1808
Solicitation SPE7M5-27-T-1808 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 440 electronic shielding gaskets, identified as NSN 5999-01-006-0197 and part number MS90484-16-2. This item is classified as a commercial product. The required delivery date is December 26, 2026, with a need ship date of September 10, 2026, and a delivery timeline of 43 days after receipt of order. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Diego. The contract mandates strict adherence to quality and safety standards, including zero-based sampling plans per MIL-STD-1916 or ASQ H1331 and packaging and marking requirements according to MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the intentional addition of mercury and the use of Class I ozone-depleting substances. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment, and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and hazardous material identification.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334416
New
Federal
Purchase Olson Electrics 300k Pad Mount Transformer
Solicitation # 47QSSC27Q0027
Solicitation 47QSSC27Q0027 is a request for quote for the purchase and delivery of one Olsun Electrics 300 kVA Cast Coil Pad Mount Transformer for NAVFAC SW MPD HVE Utilities. The procurement is designated as brand name, with no substitutions accepted, because only Olsun provides the specific radial feed-through dry type transformers required for the installation where liquid-filled alternatives are not feasible. The estimated contract value ranges between 141,334.00 and 172,427.48 USD. Technical specifications require a 3-phase, 60 Hertz unit with a NEMA 3R 316 stainless steel enclosure in Munsell Green, primary voltage 12000D, and secondary voltage 208Y/120. The unit must be American made in accordance with Buy American requirements and include IEEE/ANSI factory production test reports. The contract will be awarded based on the lowest evaluated price to a responsible offeror who passes all administrative compliance checks. Valid quotes must be submitted by December 10, 2026, and must include the completed RFQ document and a signed MIL-STD 129 compliance document. Delivery is FOB Destination, CONUS, with the updated delivery location specified as the East Miramar Marine Corps Base storage facility. Vendors are required to be registered in SAM.gov and the OMS Vendor Portal or EDI. Packaging and marking must strictly adhere to MIL-STD-129R for military deliveries, including the use of specific 2D barcodes and Transportation Control Numbers.
Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

2 days ago

DEADLINE

in 25 days
View Details
NAICS: 334416
New
Federal
59--COIL,RADIO FREQUENC
Solicitation # N0010427QYA47
This solicitation is for the procurement of radio frequency coils to be used as spares for the Department of Defense, specifically through the Navsup Weapon Systems Support Mech. The contract requires the manufacture of items according to specific design standards identified by Cage Code 73030 and reference number NV822156-1. Compliance with ISO 9001 quality systems and MIL-STD-129 and MIL-STD-130 standards for identification and packaging is mandatory. A critical requirement of this contract is that all supplied materials must be mercury-free to prevent corrosion and toxicity on submarines and surface ships. Any deviation regarding the use of mercury requires prior written approval from the Procurement Contracting Officer. The contract is a total small business set-aside and includes strict guidelines regarding design changes, where any substitution of parts must be approved via a written change order unless it is a simple part number change.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 334416
New
Federal
Purchase Olsun Electrics 225 KVA Transformer
Solicitation # 47QSSC27Q0028
Solicitation 47QSSC27Q0028 is a Request for Quote issued by the General Services Administration on behalf of NAVFAC SW MPD HVE Utilities for the purchase and delivery of one Olsun Electrics 225kVA Cast Coil Transformer. This equipment is mission-critical for operations at Naval Base San Diego, California. The transformer must be a 3-phase, 60 Hertz, copper wound, pad-mounted unit with a NEMA 3R cold rolled 316 stainless steel enclosure. Technical specifications include a primary voltage of 12000D, secondary voltage of 208Y/120, and a radial feed-through design with three 200A bushing wells. Due to specific technical requirements and a lack of containment pads for oil-filled alternatives, this is a brand-name procurement, and no substitutions will be accepted. The contract will be awarded on a Lowest Price Technically Acceptable basis to a responsible offeror who passes an administrative compliance review. To be considered valid, quotes must be submitted by December 10, 2026, and must include the completed RFQ document and a signed MIL-STD 129 compliance document. Delivery is FOB Destination, CONUS, to Naval Base San Diego. The awarded vendor must comply with MIL-STD-129R marking and shipping label requirements and provide factory test results, including IEEE/ANSI Standard production tests. Estimated total dollar values for the procurement are cited between $120,364.00 and $146,844.08.
Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

2 days ago

DEADLINE

in 25 days
View Details
NAICS: 334416
New
DIBBS
Manufacturing of Radio Frequency Interference Filters (NSN 5915-01-331-3062)This subcontract involves the manufacturing of 27 Radio Frequency Interference filters, identified by NSN 5915-01-331-3062, for prime contractors delivering to the DLA Weapons Support Active Devices Division. Fabrication must strictly adhere to Reference Drawing NR 78286 70550-00800, with the final delivery consisting of finished and inspected units. Performance of the contract will take place in Cherry Point. Eligible providers must maintain ISO 9001 or SAE AS9100 quality systems and possess US/Canada Joint Certification Program access to obtain necessary technical data. Compliance with the Buy American Act and ITAR/EAR export controls is mandatory. The response deadline for this requirement is November 23, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334416
New
DIBBS
Printed Circuit Assembly (PCA) Fabrication and SupplyThis subcontract involves the fabrication and supply of specialized printed circuit assemblies for prime contractors supporting the DLA Weapons Support Maritime Supply Chain under the Department of Defense. The scope of work requires the manufacture of electronic assemblies using standard PCB fabrication equipment, with a strict prohibition on additive manufacturing unless specific authorization is granted. All deliverables must adhere to the technical specifications linked to individual RFQ part numbers. The project is categorized under NAICS code 334416 and will be performed in Pascagoula, Mississippi. Interested parties must respond by November 23, 2026, to provide the finished printed circuit assemblies as required by the agency.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334416
New
DIBBS
Fixed Metallic Capacitor Supply (NSN 5910-01-464-9639)This subcontract involves the procurement of 41 Fixed Metallic Capacitors for the DLA Weapons Support Maritime Supply Chain. The selected provider is responsible for manufacturing or sourcing components that strictly adhere to NSN 5910-01-464-9639 specifications. Key deliverables include the capacitors themselves and comprehensive technical data packages for all approved or alternate parts, with all components labeled according to IPC/JEDEC J-STD-609 standards. The project is categorized under NAICS code 334416 and requires the contractor to complete a CMMC Level 2 self-assessment. Performance will take place in Tracy, California. Interested parties must respond by November 23, 2026, to support the Department of Defense in maintaining critical maritime supply chain infrastructure.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334416
New
DIBBS
Manufacturing of Fixed Paper Dielectric CapacitorsThis subcontract involves the manufacture of 151 fixed paper dielectric capacitors for the Department of Defense under the DLA Weapons Support Active Devices Division. The capacitors must be fabricated to meet MIL-PRF-11693F and MIL-PRF-11693/7H specifications as well as QPL standards, with lead or lead-free identification applied according to IPC/JEDEC J-STD-609. Eligible contractors must possess a valid manufacturing CAGE code recognized on the Qualified Products List. The project falls under NAICS code 334416, with performance taking place in Jacksonville, Florida. The response deadline for this requirement is November 23, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334220
New
DIBBS
FLANGE, WAVEGUIDE
Solicitation # SPE7M5-27-T-1205
Solicitation SPE7M5-27-T-1205, issued by the DLA Weapons Support Active Devices Division, is a request for quotations for two waveguide flanges, identified by NSN 5985017080949 and L3 Technologies part number 60075552-000. The requirement consists of two separate line items for one unit each, with required delivery dates of October 16, 2026, and October 19, 2026. Deliveries are designated as FOB Destination, with inspection and acceptance also occurring at the destination. Shipping locations include the Naval Air Warfare Center Air Division in Patuxent River, Maryland, and the U.S. Naval Air Station Sigonella in Italy. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. This solicitation is not a small business set-aside and requires compliance with various federal regulations, including the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Quotes must be submitted via the DLA Internet Bid Board System, and the use of additive manufacturing for the parts is prohibited unless specifically authorized.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, BULKHEAD,
Solicitation # SPE7M5-27-T-1822
Solicitation SPE7M5-27-T-1822 is a Request for Quotations issued by the DLA Weapons Support Active Devices Division for the procurement of seven electrical bulkhead connectors, identified by NSN 5935-01-693-9269. The contract requires delivery within 94 days after receipt of order, with inspection and acceptance occurring at the destination. This acquisition may be eligible for automated award, and a price evaluation preference is available for HUBZone Small Business Concerns. The procurement is subject to stringent security and regulatory requirements. Offerors must possess an approved US/Canada Joint Certification Program certification and be approved by the DLA controlling authority to access export-controlled technical data subject to ITAR or EAR. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 and DFARS 252.204-7012 for safeguarding covered defense information is required. Additionally, the contractor must adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and utilize the Wide Area WorkFlow system for all invoicing and receiving reports.
Electronic Connector Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, BULKHEAD, ELE
Solicitation # SPE7M5-27-T-1825
Solicitation SPE7M5-27-T-1825 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of six electrical bulkhead connectors, identified by NSN 5935-01-693-9265. The required delivery is 157 days after order, with a need ship date of April 20, 2027, and a final required delivery date of November 1, 2027. Delivery is established as FOB Origin, with the destination for inspection and acceptance located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-DTL-55330 for connector preservation, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking. Significant security and regulatory requirements are in place, including CMMC Level 2 certification, safeguarding of covered defense information per DFARS 252.204-7012, and strict export controls under ITAR and EAR. Additionally, the procurement incorporates the Buy American Act and Berry Amendment restrictions. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Electronic Connector Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334310
New
DIBBS
HEADSET, ELECTRICAL
Solicitation # SPE7M5-27-T-1821
Solicitation SPE7M5-27-T-1821 is a small business set-aside Request for Quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 50 electrical headsets, identified by NSN 5965-01-691-1942 and part number A06-0015-002. This is a Foreign Military Sales requirement for Jordan, with the final delivery destination being the Royal Signal Corps Warehouse in Zarqa, Jordan, via a freight forwarder in Newark, New Jersey. The original required delivery date is June 8, 2026, with a delivery window of 20 days after receipt of order. Inspection and acceptance are both designated at the point of origin. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The solicitation also incorporates critical federal regulations, including DFARS cybersecurity reporting standards, the Hazard Communication Standard for hazardous materials, and domestic sourcing restrictions such as the Buy American Act and Berry Amendment.
Audio and Video Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ANTENNA UNIT
Solicitation # SPE7M5-27-T-1813
Solicitation SPE7M5-27-T-1813 is a request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 30 antenna unit switches, identified by NSN 5985-01-442-0958 and Daico Industries part number CSWX9188. This is a total small business set-aside under NAICS code 334419. The required delivery date is May 9, 2028, with a delivery window of 542 days after order. Shipping is designated as FOB Origin, with the final destination for both inspection and acceptance being the DLA Distribution Depot at Hill AFB, Utah. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Specific requirements include CMMC Level 2 Self-Assessment, the removal of government identification from non-accepted supplies, and compliance with the Buy American Act and Berry Amendment. Packaging must follow MIL-STD-129, with specific protocols for hazardous materials per FED-STD-313 and TQ requirement IP025. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests.
Other Electronic Component Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 423610
New
DIBBS
Voltmeter Hardware Supply (NSN 6625010322524)This subcontract involves the supply of 24 voltmeter units meeting the specifications of NSN 6625010322524 for the DLA Weapons Support Active Devices Division. The hardware is designated as a Critical Application Item and requires full disclosure of covered defense telecommunications equipment, including the brand, manufacturer, and model number. The contract falls under NAICS code 423610 and requires delivery of the units to a specified government location at Hill AFB, zip code 84056-5734. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
Manufacturer of Electrical Grounding Strip (NSN 5999-01-738-6815)This subcontract involves the manufacture of a specialized electrical grounding strip, part number 5486639-232, for the DLA Weapons Support Active Devices Division. The fabrication must strictly adhere to Basic Drawing NR 53711, Revision Y and TDP Rev A Gen 2, with the final product marked according to MIL-STD-2073-1E. Performance of this contract requires the use of precision metal fabrication equipment and valid US/Canada Joint Certification Program certification. The project is subject to rigorous regulatory compliance, including ITAR, EAR, the Buy American Act, and the Berry Amendment. Work is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 23, 2026, to provide the single required grounding strip under NAICS code 334419.
Other Electronic Component Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 423840
New
DIBBS
Supply and Delivery of Fin, StabilizerThis subcontract involves the supply and delivery of Fin, Stabilizer units for prime contractors supporting the Defense Logistics Agency Weapons Support Active Devices Division. The selected provider is responsible for sourcing NSN 2040016825496 from an approved Original Equipment Manufacturer and managing all logistics to ensure delivery to the specified destination in Tracy, California. To be eligible, the contractor must maintain a valid CAGE code and strictly adhere to all DLA delivery requirements. The opportunity is categorized under NAICS code 423840, with a response deadline set for November 23, 2026.
Industrial Supplies Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing of Fin, Stabilizer (NSN 2040016825496)This subcontract involves the manufacturing of four stabilizer fins under NSN 2040016825496 for the Defense Logistics Agency Weapons Support Active Devices Division. The selected provider must be an original equipment manufacturer or a certified manufacturer capable of fabricating the units to exact dimensions and material specifications using aerospace-grade metals or composites. All production must strictly adhere to the technical and quality requirements specified in the R or I numbers from the DLA Master List. The project falls under NAICS code 336413 and is designated for performance in Tracy, California. Interested parties must submit their responses by November 23, 2026, to support prime contractors fulfilling these Department of Defense supply requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
Conductive Gasketing Material SupplierThis subcontract, issued by the DLA Weapons Support Active Devices Division under the Department of Defense, requires the supply of 36 units of conductive gasketing material. The material must be manufactured or sourced to meet NSN 5999-01-6645-754 specifications and delivered to the DLA Distribution DDSP New Cumberland Facility. Additionally, the supplier is responsible for providing Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The opportunity is designated as a Total Small Business Set-Aside under NAICS code 339113. Interested parties must respond by November 23, 2026, to provide these materials for prime contractors fulfilling DLA supply contracts. Performance will take place in New Cumberland, Pennsylvania.
Surgical Appliance and Supplies Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Labeling for Electronic ComponentsThis subcontract involves providing specialized packaging and labeling services for electronic components destined for DLA Distribution Cherry Point. The contractor is responsible for ensuring all items are packaged according to RP001 and that shipments are marked and labeled in strict accordance with MIL-STD-129 and ASTM D3951. Additionally, the contractor must maintain compliance with TQ Requirement IP025 for any hazardous materials involved, delivering fully packed and palletized shipments ready for First Destination Transportation. Managed by the Department of Defense under the DLA Weapons Support Active Devices Division, the performance of this contract takes place in Cherry Point, North Carolina. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 23, 2026.
Freight Transportation Arrangement

POSTED

3 days ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334416
Awarded
DIBBS
RESISTOR, FIXED, WIRE WOUND, INDUCTIVE
Solicitation # SPE7M5-27-Q-0138
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 334416
Awarded
DIBBS
RESISTOR, CHIP, FIXED, FILM
Solicitation # SPE7M0-27-Q-0185
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access
Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS