Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RESISTOR, THERMAL

Active
SPE7M5-26-T-398DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two thermal resistors with NSN 5905-01-167-8648, designated as a critical application item, sourced exclusively from approved manufacturers LAVI SYSTEMS, INC. and EDEL ENGINEERING DEVELOPMENT CO. with specific part numbers S246-B52 and 10-30758-7 respectively. The contract imposes stringent quality and compliance requirements including adherence to MIL-STD-1916 or equivalent zero-based sampling plans with strict acceptance criteria—zero non-conformances required unless otherwise stated—and mandates assignment of verification levels VII, IV, and II for critical, major, and minor attributes. Configuration control requires formal engineering change proposals for any deviations, and all unapproved sources must receive ESA approval prior to submission. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with special attention to lead finish identification per IPC/JEDEC J-STD-609, requiring each unit package to be labeled according to specified paragraphs for Pb and Pb-free status. The items must be delivered FOB origin within 165 days to Tinker AFB, Oklahoma, with no variance allowed in quantity—exactly two units must be supplied. Inspection and acceptance occur at destination, and transportation logistics follow DLA procedural notes C19 and C20. All documentation must meet Source Approval Request standards, and removal of government identifiers from non-accepted supplies is prohibited. The contract is issued under SPE7M5-26-T-398D with a unit price of $2.00 per unit and a total value of $4.00, with a bid deadline of August 20, 2026.

General Info

Procure two critical thermal resistors, NSN 5905-01-167-8648, from approved vendors, FOB origin, FDD 165 days, $4.00 total.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-398D for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
BRITTANY LUSTER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESISTOR,THERMAL
RESISTOR,THERMAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
BIDSET ESTABLISHED.
ESA APPROVAL REQUIRED FOR ALL UNAPPROVED SOURCES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
LAVI SYSTEMS, INC. 0ADZ9 P/N S246-B52
EDEL ENGINEERING DEVELOPMENT CO. 00QR4 P/N 10-30758-7
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017778350 0001 EA 2.000
NSN/MATERIAL:5905011678648
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
SPE7M5-26-T-398D
SECTION B
PR: 7017778350 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE7M5-26-T-398D
SECTION B
PR: 7017778350 PRLI: 0001 CONT’D
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:02/02/2027 Original Required Delivery Date:05/25/2027
SPE7M5-26-T-398D NSN/Part Number: 5905-01-167-8648 Quantity: 2 EA Purchase Request: 7017778350QTY: 2 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELE
Solicitation # SPE7M5-26-T-399M
The contract pertains to the procurement of a single fixed electrical capacitor, identified by NSN 5910-01-451-8713 and part number CWR06KB155KC, compliant with MIL-PRF-55365K and MIL-PRF-55365/4L specifications. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation or award date. The item must conform to qualification standards listed on Qualified Products Lists or Qualified Manufacturers Lists, and physical identification and marking must adhere to RQ017 and MIL-STD-129. Lead finish markings must follow IPC/JEDEC J-STD-609, applied to each unit pack with placement consistent with the standard’s technical guidelines. Packaging and preservation must comply with MIL-DTL-39028 for capacitors, and all packaging, labeling, and shipping must meet MIL-STD-2073-1E. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The delivery deadline is 20 days from contract award, with a required delivery date of August 10, 2026. The destination is Fort Riley, Kansas, for the U.S. Army, and transportation and shipment details are governed by DLAD Procurement Notes C19 and C20. Special marking codes and government use identifiers are included for logistics and tracking purposes.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M5-26-T-397V
This contract specifies the procurement of a fixed film resistor identified by NSN 5905002535193 and part number RNC50H6652FS, meeting MIL-PRF-55182/1R Revision R dated 08/15/2024, with a required quantity of 2,381 units delivered FOB origin within 165 days. All components must comply with DLA packaging requirements and be marked in accordance with MIL-STD-129, including special marking code ZZ for unique requirements. The resistor must be protected from electrostatic discharge and electromagnetic interference using qualified packaging materials per MIL-PRF-81705, specifically Type I and Type III barrier materials sourced only from manufacturers listed on QPL-81705, with ESD and physical protection applied to all leads and terminals. Lead finish labeling must conform to IPC/JEDEC J-STD-609, and the item is designated as a critical application component undergoing full and open competition. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless approved in writing by the contracting officer, and mercury or mercury compounds are forbidden except in specific exempted applications such as batteries or specified instruments, with portable devices containing mercury requiring shockproof construction and secondary containment. Preservation and packaging must exclude mercury entirely under IP056, and all packaging must adhere to MIL-STD-2073-1E with preservation method GX and unit package codes as defined. Deliveries must be palletized to DLA standards and sent to the designated DLA distribution facility in New Cumberland, PA, with no variance allowed in quantity. The contract enforces strict compliance with technical and quality requirements referenced through the DLA Master List, and any proposed packaging solutions must be documented if the solicitation does not explicitly require ESD/EMI protection for items susceptible to environmental degradation.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M0-26-T-034P
This contract specifies the procurement of a fixed ceramic capacitor identified by NSN 5910-01-182-2217, with a quantity of one unit, under purchase request 7017784015. The item is classified as a commercial item, including commercial of a type, and must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revision controls based on the solicitation or award date as determined by acquisition type. Physical identification and marking of the item are required, and government identification must be removed from any non-accepted supplies. Delivery is mandated within five days of award, with performance taking place at Robins AFB, GA, 31098-1626. The solicitation, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, has a response deadline of August 20, 2026, and is solicited under SPE7M0-26-T-034P, with primary point of contact Audrey Acuna available via email and phone for inquiries.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE7L7-26-T-4660
The contract is for the supply of 10 units of a battery power supply with part number TI2000GPU-24 and NSN 6130-01-445-9539, under solicitation SPE7L7-26-T-4660, issued by the Defense Logistics Agency for the Department of Defense. Delivery is required within 20 days to the USCG Aviation Logistics Center in Elizabeth City, NC, with FOB destination terms and zero variance allowed in quantity. The item is classified as a commercial off-the-shelf product with a Type II shelf life of 12 months, extendable, and must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including special marking code 33 for shelf life. Packaging must adhere to DLA’s procurement guidelines and include appropriate hazardous material controls as outlined in IP025. The item must not contain intentional mercury or mercury-containing compounds except where functionally necessary, such as in batteries, and any mercury-containing portable devices must include a secondary containment barrier as specified by NAVSEA. The supplier must comply with CMMC Level 2 cybersecurity self-assessment requirements and handle covered defense information per RD002. All hazardous materials must be accompanied by Safety Data Sheets (SDS) and labels conforming to OSHA’s Hazard Communication Standard 29 C.F.R. 1910.1200, and employees must be trained on these requirements. Sampling and inspection are governed by MIL-STD-1916 or equivalent zero-based plans, with acceptance standards of zero non-conformances unless otherwise stated. The contract requires full compliance with DLA’s master list of technical and quality requirements, and the item is subject to verification against critical, major, and minor attributes with assigned verification levels or AQLs. Shipping must use the fastest traceable means, explicitly prohibiting parcel post, and must follow the provided freight and parcel addresses. The solicitation is a total small business set-aside under NAICS code 334416, with responses due by August 20, 2026, and the original delivery date set for July 23, 2026.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
SEAL, NONMETALLIC CHANN
Solicitation # SPE7L3-26-T-168Z
The contract pertains to a nonmetallic channel seal designated by part number AT214162 and national stock number 5330014737861, with a single unit to be delivered within five days of order placement. The item must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, requiring a medium-duty, waterproof, greaseproof, and opaque bag to protect against ultraviolet degradation. Packaging and marking must comply fully with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. All shipments are to be delivered FOB origin, inspected at destination, and shipped via traceable means—parcel post is prohibited. The delivery address is Fort McCoy, Wisconsin, with specific handling instructions for RDD shipment and hazardous materials compliance per IP025. The contract references DoD packaging and quality standards from the DLA Master List, and the revision in effect on the solicitation issue date governs requirements. The unit of issue is each, with no quantity variance allowed, and the purchase request number is 7017768611. The original required delivery date is August 10, 2026, with the solicitation issued under SPE7L3-26-T-168Z. The supplier is John Deere Construction & Forestry Co, and the contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M1-26-T-269K
This contract outlines the procurement of a fixed ceramic capacitor, part number CCR06CG472GS, manufactured in compliance with MIL-PRF-20/36H and MIL-PRF-20N Supplement 1, both effective as of specified revision dates. The item is classified as a commercial item under FAR 11.001 and is subject to strict quality control, requiring procurement exclusively from qualified sources listed on the Qualified Product Database (QPD) in accordance with MIL-PRF-20. Commercial substitutes are prohibited without prior written government approval. The capacitor must meet all technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, and the use of ozone-depleting substances is explicitly forbidden unless granted written authorization by the Contracting Officer. Mercury and mercury-containing compounds are prohibited in its construction or direct contact, with limited exceptions for specific functional uses such as batteries, fluorescent lighting, and naval instruments, all subject to additional containment requirements. The item must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including special packaging and preservation methods as defined by MIL-DTL-39028 for capacitors. Each individual unit pack must bear lead-free or lead-containing attribute markings as per IPC/JEDEC J-STD-609, with placement and documentation requirements fully specified. The delivery is FOB origin, with a total quantity of 1,281 units to be delivered within 74 days, subject to zero quantity variance. Inspection and acceptance occur at the destination, and the shipping address is designated as DLA Distribution Jacksonville. The contract prohibits the use of hazardous materials without compliance to IP025 and requires adherence to all transportation directives under DLAD Proc Notes C19 and C20. The item is designated as a critical application component, and all packaging data has been reviewed and released in SAP as of May 13, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M0-26-T-034E
This contract specifies the procurement of a fixed film resistor identified by part number TNPW12062409BT-9 and NSN 5905014746356, with a quantity of one unit delivered FOB origin within five days. The item must comply with DLA packaging requirements under MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which requires accurate identification of Pb-free and other component attributes on each unit package. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The contractor must deliver to Fort Carson, Colorado, using traceable freight methods and avoid parcel post, with the shipment directed to the Central Receiving Point under the code W80BTZ. The contract includes strict zero variance in quantity, destination inspection and acceptance, and special marking requirements for compliance with federal standards. All data, including the point of contact, delivery date, and solicitation number, is tied to the DoD procurement system and is subject to government use and oversight.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M5-26-T-396X
Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with the Berry threshold lowered to $150,000, necessitating full disclosure of any non-domestic materials via written notification to the point of contact. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and explicitly bans items produced via additive manufacturing unless prior written approval is obtained. Small business joint ventures must submit specific representations for all applicable categories, including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and HUBZone status. Due to fluctuating demand, offerors are strongly encouraged to quote quantity ranges to allow buyers flexibility in combining or adjusting requirements without resolicitation, though this does not apply to Auto IDC. All vendors must register through DLA’s new Account Management & Provisioning System (AMPS) within two months to access the Vendor Shipment Module and continue shipping, with Web Services users required to update their internal schema by the specified deadline. Offerors intending to submit a quote after the closing date must file a “No Bid” on DIBBS with a reason or anticipated date to avoid assumptions of non-responsiveness. Fast Pay is not applicable. The item being procured is a thermal resistor, NSN 5905-01-193-7198, quantity of two units, with a delivery requirement of 275 days ADO, under solicitation SPE7M5-26-T-396X, managed by the Department of Defense’s Active Devices Division at Tinker AFB, with Jeanette Heisey as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
JACK, TIP
Solicitation # SPE7M5-26-T-399P
The contract pertains to the procurement of Emerson electronic connector, part number 105-0803-001, identified by NSN 5935-01-058-9244, under solicitation SPE7M5-26-T-399P. A total quantity of 1,163 units is required, split into two line items: six units at $6.00 each and 1,157 units at the same unit price, with no tolerance for quantity variance. Delivery must be completed within 165 days from the contract award, shipped FOB origin in compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. All items must be prepared for delivery using specific packaging codes, containment types, and preservation methods, with no special marking required. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Critical attributes are assigned verification level VII with an AQL of 0.1. The product is classified as a critical application item. Shipping is directed to two DLA distribution points: Jacksonville, FL and Cherry Point, NC, with specific parcel and freight addresses provided. The contract adheres to DLA's technical and quality requirements as referenced in their master list, and transportation follows DLA procedures C19 and C20. The original delivery deadline was December 19, 2026, with a needed ship date of February 2, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-269L
The contract pertains to the procurement of a coil, electrical, identified by NSN 5950004360115 and part number MC13768, manufactured by Eaton Aerospace LLC for aerospace applications. A total quantity of 134 units is required, with delivery mandated to occur within 176 days from contract award, delivered FOB origin. Inspection and acceptance are to occur at the destination, with no tolerance allowed for quantity variance—plus or minus zero percent. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit packaging codes, while marking adheres to MIL-STD-129 without special identifiers. Palletization follows DLA packaging standards, and hazardous material handling is governed by IP025. The delivery destination is Hill AFB, Utah, with the parcel post and freight shipping address specified accordingly. Quality assurance is governed by tailored higher-level requirements, including sampling protocols that mandate zero-defect acceptance under MIL-STD-1916 or ASQ H1331 Table 1 unless otherwise directed, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes default to major classification. For simplified acquisitions, the referenced DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date or award date applies, while large acquisitions depend on the RFP issue date unless amended. All technical and quality requirements are incorporated by reference from the DLA Master List. The contract is issued under solicitation SPE7M1-26-T-269L, with a response deadline in August 2026 and an original required delivery date of July 16, 2027. The point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain, with unit of issue specified per ANSI X12 standards.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M5-26-T-397B
This contract is for the procurement of fixed wire resistors under solicitation SPE7M5-26-T-397B, with a total quantity of two units to be delivered within 20 days to the USS CHUNG HOON DDG 93 at FPO AP 96662. The item is identified by NSN 5905-00-617-8225 and must conform to strict technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, incorporating referenced R and I numbers. The use of any Class I ozone-depleting substances is prohibited in all manufacturing and testing processes unless explicitly approved in writing by the contracting officer; mercury and mercury-containing compounds are also banned unless specifically exempted for designated functional applications such as batteries, sensors, or naval-referenced reagents, with portable mercury-containing devices required to have shockproof construction and a secondary containment boundary. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, including IPC/JEDEC J-STD-609 lead finish identification on each unit package. The contract specifies FOB destination delivery with zero quantity variance, inspection and acceptance at the delivery point, and requires compliance with DLA transportation procedures for vessel and RDD 777 shipments. Only approved vendors with designated part numbers from WARD LEONARD CT LLC, MARATHONNORCO AEROSPACE, INC., and OHMITE HOLDING, L.L.C. are eligible, and full and open competition is enforced. The contract is governed under federal procurement rules, with the purchase unit of issue being EA and unit price set at $2.00 per unit.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
POWER SUPPLY, UNINTE
Solicitation # SPE7L7-26-T-4676
The contract is for the procurement of four unintermittent power supplies with NSN/Part Number 6130-20-001-8381, issued under solicitation SPE7L7-26-T-4676 by the Department of Defense through the DDSP New Cumberland Facility. The delivery deadline is 88 days after award, and responses must be submitted by August 20, 2026. The solicitation incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issuance or award date depending on the acquisition size. The offeror must provide a complete data package for both the approved and alternate parts, and no government identification may be removed from non-accepted supplies. The point of contact is Maria Blaney, reachable via email and phone, and the place of performance is specified as New Cumberland, PA, 17070-5002. The procurement falls under NAICS code 334416 and is classified as a federal solicitation with no set-aside designation.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data SupportThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for hazardous materials in full compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200 standards. This effort is critical to ensure proper identification, handling, and communication of hazards associated with materials used or supplied under the agreement, with strict adherence to federal regulatory requirements for workplace safety and defense contracting. All documentation must be accurate, up to date, and formatted in accordance with the specified guidelines to meet military and occupational safety protocols. This subcontract, issued by the Active Devices Division of the Department of Defense, falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to safety and regulatory compliance. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The performance location and point of contact details are not specified, but the work must be executed to support the defense supply chain’s safety and regulatory obligations. Interested parties must respond through the designated DIBBS system portal before the deadline to be considered for award.
Environmental Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, marking, and labeling services strictly in compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all military-grade requirements are met for the storage, handling, and transport of equipment and materials. This includes accurate bar-coding for logistics tracking and proper hazardous material labeling as mandated by applicable regulations, with full attention to detail to support military supply chain integrity and safety protocols. All work must be performed under the specifications of these standards without exception to ensure seamless integration into Department of Defense logistics systems. The contract is classified as a subcontract under NAICS code 493190 and is issued by the Active Devices Division of the Department of Defense. It was posted on August 9, 2026, with responses due by August 20, 2026, and is accessible through the DIBBS platform. There is no set-aside designation specified, and performance location details are not provided, indicating flexibility in execution site as long as deliverables meet federal standards. The contractor must be fully prepared to handle the technical and regulatory demands of military packaging and labeling, with an emphasis on precision, compliance, and documentation accuracy throughout the process.
Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
Electronic Shielding Gasket ManufacturingThe contract pertains to the manufacture and delivery of three units of EMI shielding gaskets, identified by NSN 5999-01-680-5759 and part number PG632000-05, all of which must fully comply with Department of Defense technical and military specifications. The work is classified as a subcontract under NAICS code 334419, indicating it falls within the category of other electronic component manufacturing. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is managed by the Active Devices Division under the Department of Defense. There is no specified set-aside type, and the place of performance and point of contact details are not provided in the data, though all deliverables must meet the stringent standards required for military applications. The contract is accessible via a public DIBBS platform link for further submission and reference.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Transportation LogisticsThe contract requires the transport of finished connector assemblies from the manufacturer to DLA Distribution in New Cumberland, Pennsylvania, under FOB Origin terms, meaning the buyer assumes responsibility once the goods leave the manufacturer’s location. All transportation must comply with U.S.-flag vessel requirements when sea transport is involved, ensuring adherence to maritime regulations and domestic shipping mandates. The work is classified under NAICS code 484220 for support activities for truck transportation, indicating the primary focus is on logistics coordination rather than manufacturing. As a subcontract awarded by the Department of Defense’s Active Devices Division, this effort supports critical defense supply chain operations. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is intended for subcontractors participating in a broader logistics arrangement. The place of performance is clearly identified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and while no specific point of contact is listed, the contract can be accessed via the DIBBS procurement portal. No set-aside provisions are specified, meaning all eligible contractors may respond. This contract emphasizes timely and compliant delivery of sensitive defense components, requiring precise coordination across domestic and international shipping lanes while meeting U.S. maritime laws for oceanic segments of the supply route.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 811212
New
DIBBS
MIL-STD-129 Marking and BarcodingThis contract requires the application of MIL-STD-129 compliant marking and barcoding to all shipments, ensuring that both hazardous and non-hazardous items are properly labeled with machine-readable barcodes and standard shipping labels as mandated by U.S. Department of Defense standards. The work must be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation is classified as a subcontract under NAICS code 811212, indicating a focus on commercial and industrial machinery and equipment repair and maintenance services. Responses must be submitted by August 20, 2026, with the opportunity posted on August 9, 2026, through the DIBBS portal under solicitation number SPE7M526T399N. The contracting entity is the Active Devices Division within the Department of Defense, and the requirement is critical for ensuring uniformity, traceability, and compliance in military logistics and supply chain operations.
Computer and Office Machine Repair and Maintenance

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339920
New
DIBBS
MIL-SPEC Packaging and Preservation ServicesThe contract requires the provision of packaging and preservation services for connector assemblies that fully comply with MIL-STD-2073-1E and MIL-DTL-55330 specifications. This includes implementing dry climate control measures to protect components from moisture damage, applying preservation method ZZ for long-term corrosion resistance, and ensuring all unit containers meet the stringent D3 requirements for durability, labeling, and environmental protection during storage and transit. The work must be performed to exact military standards with documented verification of compliance at every stage of the packaging process. Deliverables are to be supplied to the Department of Defense’s Active Devices Division, with performance occurring at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is structured as a subcontract under NAICS code 339920, and responses must be submitted by the deadline of August 20, 2026. The contract focuses exclusively on technical adherence to military packaging specifications, with no indication of set-aside provisions or specific small business preferences, and the primary emphasis is on quality control, documentation, and strict conformance to all referenced military standards.
Sporting and Athletic Goods Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
Manufacture of Qualified Electrical Connector AssembliesThe contract requires the manufacture of 58 military-spec electrical plug connectors designated as NSN 5935010411338 and model MS3406D18-1E, fully compliant with SAE AS50151 and AS34061 standards and qualified under the QPL H01 listing. All units must meet stringent environmental regulations prohibiting the use of mercury and ozone-depleting substances to ensure regulatory and operational compliance. The connectors are intended for defense applications and must be produced to exacting technical specifications to guarantee performance under extreme conditions. The solicitation, issued by the Department of Defense’s ACTIVE DEVICES DIVISION, is classified as a subcontract with a response deadline of August 20, 2026, and was posted on August 9, 2026. The North American Industry Classification System code is 334417, indicating the scope falls under semiconductor and other electronic component manufacturing. Performance is required at New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, though no specific point of contact or set-aside details are provided. All submissions must be made through the DIBBS portal using the provided UI link.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 312230
New
DIBBS
Military Packaging and Preservation ServicesThe contract requires the packaging, preservation, and marking of electrical connectors in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all components are protected against environmental degradation through the use of moisture barriers and desiccants. Serialized traceability labels must be applied to each item to support full lifecycle identification and inventory control. Work must be performed at the designated place of performance in Jacksonville, Florida, with delivery and compliance obligations tied to the response deadline of August 20, 2026. This is a subcontract opportunity under NAICS code 312230, issued by the Department of Defense’s Active Devices Division, and is intended for contractors capable of meeting stringent military-grade packaging and documentation requirements without deviation.
Tobacco Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks specialized services to provide hazard warning labels and compliance documentation for hazardous materials used in packaging, with strict adherence to OSHA’s Hazard Communication Standard, the Globally Harmonized System of Classification and Labeling of Chemicals, and the Defense Federal Acquisition Regulation Supplement requirements. All deliverables must meet federal regulatory standards to ensure safe handling, transport, and use of hazardous substances within Department of Defense supply chains. The work is performance-based and requires accurate labeling, multi-language compliance materials, and documentation that aligns with current regulatory frameworks and DoD procurement policies. Performance of this subcontract is specifically tied to Jacksonville, Florida, with a response deadline of August 20, 2026, and an issuance date of August 9, 2026. The North American Industry Classification System code 541690 indicates this is for other scientific and technical consulting services, highlighting the expertise needed in regulatory compliance and hazardous materials management. The contracting activity falls under the Active Devices Division of the Department of Defense, emphasizing the critical nature of these services for defense-related equipment and systems. Suppliers must demonstrate proven experience in meeting federal compliance standards and delivering accurate, traceable, and auditable labeling systems tailored to military logistics environments.
Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334332
New
DIBBS
Electrical Connectors Supply (NSN 5935010589244)The contract calls for the supply of 1,157 units of electrical connectors identified by NSN 5935010589244, requiring full manufacturing or sourcing capabilities to meet military specifications. The scope includes comprehensive quality assurance protocols, proper packaging and labeling in accordance with defense standards, and guaranteed delivery timelines to the designated performance location in Jacksonville, Florida, with zip code 32212-0103. All work must align with applicable military requirements ensuring reliability, durability, and interoperability in operational environments. The solicitation is structured as a subcontract under NAICS code 334332, reflecting the electronic component manufacturing sector, and is administered by the Active Devices Division within the Department of Defense. The opportunity was posted on August 9, 2026, with a firm response deadline of August 20, 2026. Bidders must be prepared to comply with all defense logistics and contractual obligations tied to the DLA’s procurement framework, and must submit proposals via the designated DIBBS platform before the closing date to be considered.

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling
Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Assessment Support
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details