Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RESISTOR, THERMAL

Active
SPE7M0-26-T-063KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of one fixed thermal resistor under part number 5905-01-272-8875. The contract requires a rapid delivery turnaround of five days after receipt of order. The procurement is governed by NAICS code 334416 and is managed by primary point of contact Laurie Wassmuth. Compliance with specific DLA packaging and quality requirements is mandatory, including adherence to technical standards found in the DLA Master List and strict guidelines for physical item marking and the removal of government identification from non-accepted supplies. Because no existing data is available, the alternate offeror must provide a comprehensive data package for both the approved and alternate parts. The response deadline for this solicitation is September 10, 2026.

General Info

DoD procurement of one fixed thermal resistor with five day delivery by September 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

PSC 473 BOX 8, FPO, AP, 96349, USA

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-063K.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUSA
Contacts
Laurie Wassmuth
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESISTOR,THERMAL
RESISTOR,FIXED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5905-01-272-8875 Quantity: 1 EA Purchase Request: 7018079666QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M5-26-T-452A
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-452A, is for the procurement of 19 thermal resistors identified by NSN 5905-01-592-8542. The contract requires delivery within 158 days after the order is placed, with the place of performance located in New Cumberland, Pennsylvania. Strict compliance is required regarding DLA packaging standards and export control regulations. Because the item contains technical data subject to ITAR or EAR, it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and those who have completed the mandatory DLA export-control training and questionnaires.
ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, POWER A
Solicitation # SPE7M1-26-T-317G
This solicitation, issued by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-317G, is for the procurement of three Power A Transformers, identified by NSN 5950-00-476-8433. The contract requires delivery within 128 days after the order is placed, with performance taking place at Robins Air Force Base. The agreement mandates adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Additionally, the contract includes a requirement for the removal of government identification from any non-accepted supplies. Offerors must provide a complete data package for both approved and alternate parts to be considered for the award.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WO
Solicitation # SPE7M0-26-T-064S
This contract is for the procurement of four fixed, wire-wound inductive resistors, identified by NSN 5905008004233 and part number RW47V150. The items must adhere to technical specifications MIL-PRF-26/3F Revision F and MIL-PRF-26H(5) Revision H. Delivery is required within five days after receipt of order, with shipping designated as FOB Origin and the final destination being the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The agreement mandates strict compliance with DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-DTL-39032, as well as IPC/JEDEC J-STD-609 for lead finish identification. Environmental restrictions are in place, prohibiting the use of Class I ozone-depleting substances and the intentional addition of mercury, except in specific functional cases. This is a critical application item subject to full and open competition.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M2-26-T-6587
This contract is for the procurement of 10 fixed electrolytic capacitors, identified by NSN 5910-01-138-5501 and part number M39018/04-2207M. The items must adhere to MIL-PRF-39018G and MIL-PRF-39018/4F specifications and are subject to the Qualified Products List or Qualified Manufacturers List. Delivery is required within 166 days, with a need ship date of February 24, 2027, and a final delivery date of April 17, 2027, to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict compliance with DLA packaging and marking requirements, including MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Quality assurance will be conducted via sampling methods per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional use of mercury or Class I ozone-depleting substances in the manufacturing process unless specifically authorized. Inspection and acceptance will take place at the destination.
NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FIXED
Solicitation # SPE7M5-26-T-452S
This contract is for the procurement of six fixed film resistor networks, identified by NSN 5905013192954 and part number M8340107K1502GC. The items must adhere to technical specifications MIL-PRF-83401/7E(4) and MIL-PRF-83401H(5) and must be sourced from a Qualified Products List or Qualified Manufacturers List. Delivery is required within 20 days, with the shipping destination designated as the Taiwan Army Zuo-Ying Ammunition Sub in Kaohsiung City, Taiwan, under FOB Origin terms. Strict packaging and marking requirements are mandated to protect the sensitive electronic devices. The contractor must utilize DOD qualified electrostatic discharge and electromagnetic interference protective materials per MIL-PRF-81705 and follow MIL-STD-129 for marking. Additionally, lead finish markings must be applied to each unit pack in accordance with IPC/JEDEC J-STD-609. Inspection and acceptance will occur at the point of origin.
ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-5037
This contract is a solicitation issued by the Defense Logistics Agency for the procurement of eight power supply units, identified by NSN 6130-01-523-3418 and part number VI-MUL-IQ. The contract is awarded to Westcor Corp, a subcontractor of Vicor Corp, with a required delivery date of September 2, 2026, and a delivery timeframe of five days after order. The items are to be delivered FOB Origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with specific verification levels for critical, major, and minor attributes. Additionally, the contract requires compliance with Cybersecurity Maturity Model Certification Level 2 self-assessment and prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M1-26-Q-1439
This solicitation from the Department of Defense Maritime Supply Chain is for the procurement of two fixed film resistors under part number 5905-01-681-9990. The contract requires delivery within 152 days after receipt of order and is categorized under NAICS code 334416. The agreement mandates strict adherence to cybersecurity and export control regulations. Specifically, it requires CMMC Level 2 certification from a certified third-party assessment organization. Because the item involves technical data subject to ITAR or EAR regulations, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires to access and handle the technical data.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M5-26-T-451G
Contract SPE7M5-26-T-451G is a solicitation issued by the Department of Defense Active Devices Division for the procurement of 32 fixed ceramic capacitors, identified by NSN 5910-01-353-6124 and Murata Erie North America Inc part number RPE110X7R223K50V. This commercial off-the-shelf item must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is January 10, 2027, with a need ship date of February 16, 2027, and a delivery window of 158 days after order. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking. Specific requirements include IPC/JEDEC J-STD-609 for lead finish identification on unit packs and MIL-DTL-39028 for capacitor preservation. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Inspection and acceptance will occur at the destination.
ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, EL
Solicitation # SPE7M0-26-T-064H
This solicitation, identified as SPE7M0-26-T-064H, is issued by the Department of Defense Maritime Supply Chain ESOC Buys for the procurement of one electronic shielding gasket under NSN 5999-01-478-5940. The item must be manufactured using material from drawing 19207 12422400, specifically utilizing gasket material from CAGE 06090 part number EMI-SI-M2-6001-0000. Technical specifications are governed by TDP Rev A Gen 1 and associated drawings dated March 12, 2009, and June 8, 2022. The contract requires delivery within five days after receipt of order, with shipping set as FOB Origin and both inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. The shipment is destined for the Kentucky Army National Guard at Fort Knox, Kentucky. This procurement falls under NAICS code 334416 and is subject to the Buy American Act and standard DLA technical and quality requirements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, NONW
Solicitation # SPE7M0-26-T-064T
This contract is for the procurement of one precision nonwire wound variable resistor, identified by NSN 5905006221527. The requirement specifies parts from Northrop Grumman Systems Corporation (P/N 914105-1) or General Dynamics Motion Control LLC (P/N 5290). Delivery is required within five days, with the original required delivery date set for September 2, 2026. The shipment is destined for the General Depot of Naval Supplies in Kaohsiung City, Taiwan, with FOB, inspection, and acceptance points all designated as origin. The contractor must adhere to strict technical and quality standards, including DLA packaging requirements and MIL-STD-129 for marking. Preservation and packaging must comply with MIL-DTL-39032, and unit package marking for component lead finish must follow IPC/JEDEC J-STD-609. The agreement incorporates the DLA Master List of Technical and Quality Requirements and mandates the removal of government identification from any non-accepted supplies.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED
Solicitation # SPE7M0-26-T-063D
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys under request number SPE7M0-26-T-063D, is for the procurement of one fixed resistor with NSN/Part Number 5905-01-272-8876. The requirement falls under NAICS code 334416 and specifies a delivery timeline of five days after receipt of order, with the place of performance located at FPO 96349. The solicitation was posted on August 30, 2026, with a response deadline of September 10, 2026. The contract incorporates specific DLA packaging requirements and technical quality standards as detailed in the DLA Master List. Key compliance mandates include the removal of government identification from non-accepted supplies and strict adherence to physical identification and bare item marking. Additionally, alternate offerors are required to provide a complete data package for both approved and alternate parts. The procurement process is managed through DIBBS and includes standard provisions regarding the Buy American Act and balance of payments.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
Federal
LIPTM00119, IC IPT, LHD-8 ANN AMPLIFIER PROCUREMENT, SEWP (C)The Naval Information Warfare Systems agency, specifically Niwc Atlantic, has issued a forecast for the procurement of LHD-8 ANN amplifiers under contract LIPTM00119. This acquisition is intended to be processed through the SEWP (C) vehicle and will be performed in Norfolk. Jeremy Shull serves as the primary Contracting Officer for this effort, with Teaira Hawley acting as the secondary point of contact. The procurement is scheduled for posting on August 30, 2026.
Niwc Atlantic

POSTED

about 16 hours ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 334513
New
DIBBS
SWITCH, LIQUID LEVEL
Solicitation # SPE7M0-26-T-064Z
This contract is for the procurement of two liquid level switches, identified by NSN 5930011374705 and associated with Setra Systems part numbers 34599 and LS-34768-1. The order is managed under solicitation number SPE7M0-26-T-064Z for the Department of Defense. Delivery is required within five days, with the shipment destined for the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions such as sensors or weapon systems as specified by NAVSEA. Inspection and acceptance will take place at the point of origin, and the contract specifies a zero percent quantity variance.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M0-26-T-064G
This contract is for the procurement of 19 units of tube elbows under solicitation number SPE7M0-26-T-064G for the Department of Defense. The items must adhere to technical specifications MS51820-30S and MIL-DTL-18866K(1), with a strict prohibition on the use of Class I ozone depleting chemicals. The order is subject to DLA packaging requirements and MIL-STD-129 marking standards, with a delivery timeline of five days after order. The contract is conducted under full and open competition with a delivery term of FOB Origin. Inspection and acceptance will also occur at the origin. Shipping is coordinated through the Australian Government Cargo Office in California for final delivery to the Joint Logistics Unit in Bandiana, Australia. The material does not have a shelf life requirement and must comply with configuration change management and covered defense information protocols.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER BODY, FLUID
Solicitation # SPE7M0-26-T-065D
This contract, identified as SPE7M0-26-T-065D, is for the procurement of one fluid filter body, part number 870624680 by Alfa Laval Inc, under NSN 4330011568434. The item is designated as a critical application item and must be delivered within five days. The shipment is destined for the General Depot of Naval Supplies in Kaohsiung City, Taiwan, with FOB origin terms for both inspection and acceptance. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required for specific systems. Technical and quality requirements are governed by the DLA Master List, and the required delivery date is set for September 2, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
HEATER, THERMAL RELEASE
Solicitation # SPE7M0-26-T-065B
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of two thermal release heaters under NSN 5999-01-123-2725. The contract requires a rapid delivery turnaround of five days after receipt of order. The primary point of contact for this requirement is Gerard Quinn. Compliance with DLA packaging requirements and specific technical and quality standards is mandatory, as outlined in the DLA Master List. Key regulatory requirements include the physical identification of bare items and the removal of government identification from any non-accepted supplies. Additionally, alternate offerors must provide a complete data package for both approved and alternate parts to be considered.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
SLEEVE, SHAFT, PUMP
Solicitation # SPE7M0-26-T-064W
This contract is for the procurement of one pump shaft sleeve, part number 659C0674J028A from Circor Naval Solutions LLC, intended for use on Type 10 DBN centrifugal Warren pumps. The item is identified by NSN 4320011977121 and is subject to specific DLA packaging and quality requirements, including compliance with MIL-STD-2073-1E and MIL-STD-129. Final inspection and acceptance must occur at the actual manufacturing facility, requiring a technical inspection where the contractor provides all necessary drawings and technical data to verify requirements. The delivery is set as FOB Origin with a required delivery date of September 2, 2026, and a delivery window of five days. The shipment is destined for the General Depot of Naval Supplies in Kaohsiung City, Taiwan.
Fluid Power Pump and Motor Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7M0-26-T-063M
This solicitation, issued by the Department of Defense under the Maritime Supply Chain ESOC Buys, is for the procurement of one straight shaft, identified by NSN 3040-01-491-2835. The contract requires a delivery timeframe of five days after receipt of order and is managed under solicitation number SPE7M0-26-T-063M. Performance is centered in Portsmouth, Virginia, with the primary point of contact being Abaigael Masterson. The contract includes stringent regulatory and technical requirements, most notably the need for CMMC Level 2 certification and compliance with Covered Defense Information standards. It mandates adherence to DLA packaging requirements and strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification. Additionally, the provider must follow specific configuration change management protocols and ensure the removal of government identification from any non-accepted supplies.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
STATOR, GENERATOR
Solicitation # SPE7M0-26-T-063Z
This contract is for the procurement of one generator stator, identified by NSN 6115017336200, under solicitation number SPE7M0-26-T-063Z. The item is designated as a critical application item and is associated with part numbers from Mecc Alte Inc, Essex Electro Engineers Inc, and Brighton Cromwell LLC. The delivery is required within five days after receipt of order, with a required delivery date of August 24, 2026. The agreement specifies that shipping is FOB Origin, with inspection and acceptance occurring at the destination. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The item is to be delivered to the Marine Aviation Logistics Squadron 16 in San Diego, California, via the fastest traceable means, specifically prohibiting the use of parcel post.
Motor and Generator Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE7M0-26-T-064N
This contract is for the procurement of two sleeve bushings, identified by NSN 3120014808540 and associated with Curtiss-Wright Flow Control Corporation part numbers NY6345-25-0250 and PL-43616. The order is managed under solicitation SPE7M0-26-T-064N for the Maritime Supply Chain ESOC Buys within the Department of Defense. Delivery is required within five days of order, with the final destination being the Puget Sound Naval Shipyard in Bremerton, Washington. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Item Unique Identification is not required for this request. Shipping must be handled via the fastest traceable means, and parcel post is explicitly prohibited.
Ball and Roller Bearing Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M0-26-T-063E
This contract is for the procurement of four circuit breakers, identified by NSN 5925013894444 and Eaton Corporation part number BAB2060. The order is issued by the Department of Defense under solicitation SPE7M0-26-T-063E, with a required delivery date of August 27, 2026, and a delivery timeframe of five days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to DLA packaging requirements RP001 and MIL-STD-129 for marking and labeling. Hazardous materials must be packaged per TQ requirement IP025, while non-hazardous items follow ASTM D3951. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Delivery is directed to the USA DEP Tobyhanna facility in Pennsylvania via the fastest traceable means.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M0-26-T-063C
This contract is for the procurement of two nonmetallic hoses, identified by NSN 4720012834570 and Deutz Corporation part number 140 0708. The items are designated as critical application items and must be delivered within five days of order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically Fort Rucker, Alabama. The supplier must adhere to DLA packaging requirements and ASTM D3951, with all marking and labeling following MIL-STD-129. A strict prohibition is placed on the use of Class I ozone depleting chemicals in the production of these items. The contract is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys, with a required delivery date of August 27, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M0-26-T-063W
This contract is for the procurement of electrical receptacle connectors, specifically part number MS3464E27-50P under NSN 5935014886227. The requirement consists of two line items, each for a quantity of one unit. The items are qualified products that must adhere to the Qualified Products List for Federal Stock Class 5935 and comply with technical standards SAE AS34641 Revision B and reference non-government standard AN106001 through AN106100 Revision 3. Delivery is required within five days after order, with the original required delivery date set for August 27, 2026. Shipping is FOB Origin, and the destination for both inspection and acceptance is ASD Oceana in Virginia Beach, Virginia. Packaging must comply with DLA requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous materials. All shipments must be sent via the fastest traceable means, and the use of parcel post is prohibited.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DUST
Solicitation # SPE7M0-26-T-045Y
This contract, identified as SPE7M0-26-T-045Y, is for the procurement of 996 protective dust and moisture seal covers, part number OFM-2988-A1 and NSN 5340016091655. The order is issued by the Department of Defense Maritime Supply Chain ESOC Buys with a required delivery date of March 4, 2027, and a delivery timeframe of 187 days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including the prohibition of Class I ozone depleting chemicals. Packaging must comply with MIL-STD-129 and RP001, with specific instructions to use ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. The contract specifies a zero percent quantity variance and requires all government identification to be removed from any non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 3 days
View Details