RESISTOR, THERMAL

RESISTOR,THERMAL
1RESISTOR, THERMAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
HARDNESS CRITICAL ITEM. MUST
PROCURED IN ACCORDANCE WITH THE DESIGN
CONTROL REFERENCE LISTED HEREON. PROCUREMENT
IS RESTRICTED TO THE SOURCES LISTED ON THIS
DOCUMENT. TAILORED ISO 9002 IS REQUIRED.
GOVERNMENT SOURCE INSPECTION SHALL BE IN FULL
COMPLIANCE WITH ANSI/ASQC Z1.4 AT TIGHTENED
INSPECTION LEVEL III WITH ACCEPTABLE QUALITY
LEVEL OF 0.10. PROVISIONS OF FEDERAL ACQUISITION
REGULATION 46.504 DO NOT APPLY. CERTIFICATES OF
CONFORMANCE ARE NOT ACCEPTABLE BECAUSE OF
HARDNESS CRITICALITY."
SPECIAL MARKING REQUIREMENT-EACH UNIT
PACKAGE WILL BE MARKED: "HARDNESS CRITICAL
ITEM," OR "HCI" SHOULD SPACE BE LIMITED.
FULL AND OPEN COMPETITION APPLIES.
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
FULL AND OPEN COMPETITION APPLIES.
TABULATED LIST (TWO OR MORE ITEMS)
SPE7M0-26-T-046Q
SECTION B
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC. DBA 15801 P/N 750256-1-2
HAMILTON SUNDSTRAND CORPORATION 73030 P/N 750256-1-2
EDEL ENGINEERING DEVELOPMENT CO. 00QR4 P/N 9423500
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017910956 0001 EA 1.000
NSN/MATERIAL:5905011624488
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-39032, FOR RESISTORS. UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the
SPE7M0-26-T-046Q
SECTION B
PR: 7017910956 PRLI: 0001 CONT’D
assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
FB2039
FB2039 DD DEPOT OK CNTR RECVG
CP 405 855 7075
3301 F AVE DR 22 BLDG 506
TINKER AFB OK 73145-9031
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB2039
FB2039 DD DEPOT OK CNTR RECVG
CP 405 855 7075
3301 F AVE DR 22 BLDG 506
TINKER AFB OK 73145
US
M/F: (TCN) FB203962242463
RDD: N00
PROJ: 316 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 0A ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/17/2026
SPE7M0-26-T-046Q NSN/Part Number: 5905-01-162-4488 Quantity: 1 EA Purchase Request: 7017910956QTY: 1 Delivery: 5 days ADO