Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RESISTOR, VARIABLE, NONW

Active
SPE7M1-26-Q-1329Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of 19 variable non-wire wound nonprecision resistors with NSN 5905-01-221-0620 under solicitation SPE7M1-26-Q-1329, which is a total small business set-aside classified under NAICS code 334416. The item is subject to strict export control regulations due to the presence of technical data governed by either ITAR or EAR, meaning any disclosure—domestic or international—to foreign persons, including foreign nationals employed by U.S. entities, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the technical data is restricted exclusively to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled technical data, and have received formal approval from the DLA controlling authority. Delivery is required within 175 days after order award, and the point of contact for the contract is Joseph Madjecki of the Maritime Supply Chain under the Department of Defense, with performance set at New Cumberland, Pennsylvania. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026.

General Info

Procurement of 19 export-controlled resistors under small business set-aside, restricted to certified DLA contractors, delivery in 175 days.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE7M1-26-Q-1329.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Joseph Madjecki
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RESISTOR,VARIABLE,NON WIRE WOUND,NONPRECISION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5905-01-221-0620 Quantity: 19 EA Purchase Request: 7016286612QTY: 19 Delivery: 175 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M5-26-T-367E
This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M2-26-T-5987
This contract specifies the procurement of a fixed electrolytic capacitor with NSN 5910013072343 and part number M39003/01-7300, governed by MIL-PRF-39003/1L and MIL-PRF-39003P Supp 1, with compliance required to the current revision of the DLA Master List of Technical and Quality Requirements referenced by R-numbers. The item is classified as a commercial item and is subject to strict Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Mercury and mercury-containing compounds are strictly prohibited in the product unless exempted for specific functional uses such as batteries or sensors, and portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances is prohibited in all manufacturing and processing steps unless explicitly approved in writing by the contracting officer, with exceptions for commercial items and numbered parts only. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including specific lead finish labeling per IPC/JEDEC J-STD-609 on each unit package. Sampling follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stipulated, and critical attributes are verified at the highest levels. The product must be delivered FOB origin within 161 days, with no quantity variance allowed, inspected and accepted at destination, and shipped to the specified DLA Distribution Warner Robins address. The contract was solicited under SPE7M2-26-T-5987 with a response deadline in August 2026, and delivery is required by May 9, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M5-26-T-367C
This contract specifies the procurement of 25 fixed ceramic capacitors under NSN 5910-01-252-9694 and part number CDR21BG620EFTR, compliant with MIL-PRF-55681/5F Revision F dated 03/24/2025. The item must adhere to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R identifiers, with controlled revisions based on solicitation or award dates. Manufacturing sources are restricted; materials produced by American Technical Ceramics (ATC) with lot date codes between 9449 and 9822 are prohibited due to a GIDEP alert. The use of ozone-depleting substances in any phase of production is forbidden unless explicitly approved in writing by the Contracting Officer, and this restriction does not apply to commercial items as defined by FAR 11.001 or part-numbered-only items. Packaging must conform to MIL-STD-2073-1E, with unit packaging marked per MIL-STD-129 and additional lead finish labeling per IPC/JEDEC J-STD-609, requiring clear identification of lead content on each unit pack. All items must be delivered within 20 days to the designated destination in San Diego, California, FOB origin with zero variance permitted. Shipping must use traceable freight methods only—parcel post is prohibited—and special markings with code ZZ apply. The delivery schedule is tied to an original required delivery date of July 30, 2026, with inspection and acceptance occurring at the destination. The contract is issued under solicitation SPE7M5-26-T-367C, with specific federal and DoD oversight identifiers, and point of contact details provided for procurement inquiries.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M0-26-T-028D
The contract is for the procurement of three thermal resistors, identified by NSN 5905-01-453-6917, under solicitation SPE7M0-26-T-028D, with a required delivery within five days of award. The technical and quality requirements governing this acquisition are defined by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision is determined based on whether the acquisition is simplified or large, with control tied to the solicitation issue date, award date, or any amendment date. Mandatory compliance includes the prohibition of intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except in specifically exempted cases such as functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or authorized chemical reagents by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary, in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all items must be physically marked as required. The offeror must submit a complete data package including specifications and performance data for both the approved and alternate parts, as no existing data is available. The contracting activity is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys, with primary point of contact Laurie Wassmuth, and the response deadline is August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M0-26-T-030V
The contract is for a single fixed wire resistor with part number 7S16A1640.1KILOHMSPORM0.05PCT and NSN 5905009017382, supplied by PRIME TECHNOLOGY LLC or SHALLCROSS INC DBA, meeting strict technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The item must be delivered within five days FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with additional lead finish identification required per IPC/JEDEC J-STD-609 on each unit pack. The delivery address is Fort Carson, Colorado, with shipments required to use the fastest traceable means—parcel post is prohibited—and all packaging must follow DLA packaging requirements. The item is designated for government use only, with a required delivery date of July 30, 2026, and procurement is managed under solicitation SPE7M0-26-T-030V by the Department of Defense’s Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-T-249R
The contract is for the procurement of three power transformers, identified by NSN 5950-01-736-4905 and part number 4072097-01, under solicitation SPE7M1-26-T-249R, issued by the Department of Defense through the Maritime Supply Chain office. Delivery is required within 239 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The unit of issue is each, at a price of $3.00 per unit, totaling $9.00 for the three units, with no variance permitted in quantity. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containment, with marking adhering to MIL-STD-129 and no special marking required. Palletization follows DLA packaging requirements. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, with the same address used for freight shipping. The required ship date is April 14, 2027, matching the original delivery deadline. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. All transportation logistics are subject to DLAD procedural notes C19 and C20. The solicitation opened on August 4, 2026, with responses due by August 17, 2026, and is classified under NAICS code 334416 for transformer manufacturing.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, W
Solicitation # SPE7M5-26-T-366S
The contract specifies the procurement of one variable resistor, part number 5905-01-037-3387, under solicitation SPE7M5-26-T-366S, with a required delivery within 20 days of award and delivery terms FOB origin. The item must comply with DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit packaging configured for 100 units per intermediate container marked with package code U. All items must be marked in accordance with MIL-STD-129, and additional lead finish identification per IPC/JEDEC J-STD-609 is required on each unit pack. Mercury and mercury-containing compounds are strictly prohibited except for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and naval chemical reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment as defined by NAVSEA 5100-003D. The delivery destination is the USS Dwight D. Eisenhower, with shipments required to use traceable transportation methods and explicitly exclude parcel post. The contractor must adhere to all technical and quality requirements referenced from the DLA Master List, and the revision in effect on the solicitation issue date governs compliance. The contract includes inspection and acceptance at destination, with zero variance allowed in quantity. The point of contact for inquiries is Jeanette Heisey, and the item is classified under NAICS code 334416 for active devices.
ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M0-26-T-028F
This contract specifies the procurement of a fixed ceramic capacitor identified by NSN 5910012529695 and part number CDR21BP102AGTR, governed by MIL-PRF-55681/5F Revision F dated March 24, 2025. The item must comply with all applicable technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all packaging, marking, and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-39028. The contractor is required to apply specific lead finish markings in accordance with IPC/JEDEC J-STD-609 on each unit pack, ensuring compliance with environmental and material attribute identification standards. The use of ozone-depleting substances is strictly prohibited in manufacturing or processing unless written approval is obtained from the contracting officer, and mercury or mercury-containing compounds are banned from direct contact with the product except under narrowly defined exceptions for functional uses in batteries, lighting, sensors, or weapon systems, with additional containment requirements for portable devices. The contract mandates delivery within five days of award, FOB origin, with no tolerance for quantity variance, and requires inspection and acceptance at the destination. Packaging must meet MIL-STD-129 marking standards, with special restrictions on shipping methods—parcel post is prohibited, and shipments must use fast, traceable freight services addressed to the Naval Supply Systems Command in Norfolk, Virginia. All items must be delivered by August 5, 2026, under solicitation SPE7M0-26-T-028F, with full and open competition applicable. The contract emphasizes strict adherence to environmental compliance, material restrictions, and precise packaging and labeling protocols, with direct oversight from the Department of Defense and the Maritime Supply Chain ESO Contracting Office.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334416
New
DIBBS
COIL RF
Solicitation # SPE4A5-26-T-328V
The contract pertains to the procurement of seven units of RF coil, identified by NSN 5950-01-212-6288, under solicitation SPE4A5-26-T-328V, with a response deadline of August 12, 2026, and a delivery requirement 184 days after award. Technical and quality standards referenced in this solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA specifications, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The item is not required to have Item Unique Identification per the Service customer’s request, though other marking requirements under RQ017 must be followed, including physical identification and bare item marking. Government identification must be removed from any non-accepted supplies. Measuring and test equipment used in production must meet specified standards. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program certification, completed DOD training on export-controlled data handling, and formal authorization from DLA. The place of performance is Robins Air Force Base, Georgia, with primary point of contact, Renee Wassum, reachable via email and phone for inquiries.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334416
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-225J
The contract solicitation SPE7M1-26-T-225J seeks 13 electrical coils identified by NSN 5950-01-227-4552 for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with a 168-day ADO delivery timeline culminating in a need ship date of January 19, 2027. Performance is governed by strict compliance with MIL-STD-2073-1E for packaging and preservation, requiring cleaning and drying without additional preservation or wrap materials, and MIL-STD-129 for labeling and barcoding, with all shipments marked for ocean transport via U.S.-flag vessels unless a waiver is secured through formal written request submitted at least 45 days prior to sailing. The contract mandates adherence to DFARS clauses including hazardous material identification under 252.223-7001, requiring submission of Safety Data Sheets and compliant hazard labels prior to award, and 252.247-7025 which enforces U.S.-flag vessel use for maritime transport and necessitates post-shipment documentation including ocean bills of lading and invoice compliance certifications. The contract is issued under FOB Origin terms with payment handled exclusively through WAWF using invoice types such as Invoice and Receiving Report or Invoice 2in1, and no pricing details are provided in the solicitation leaving the contract value undefined. The offeror must be registered in SAM.gov with a valid UEI and CAGE code and must represent their size status—small business or other than small—as well as any applicable socioeconomic certifications including WOSB, SDvOSB, HUBZone, or SDB status. The solicitation incorporates multiple FAR and DFARS clauses including equal opportunity requirements, combating trafficking in persons, employment eligibility verification, sustainable procurement, and whistleblower protections, with alternate language applied in several instances such as Alternate I to FAR 52.222-36 and Alternate II to FAR 52.227-1. Specialized clauses require disclosure of covered defense telecommunications equipment and supplier information, and contractor compliance with NIST SP 800-171 cybersecurity requirements for handling controlled unclassified information. Inspection and acceptance occur at the destination facility with the contractor bearing full responsibility for compliance with all technical, packaging, and documentation standards. Proposals must be submitted electronically via DIBBS by August 6, 20
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
SHIELDING GASKET, ELECT
Solicitation # SPE7M5-26-T-366L
The contract is for the procurement of 106 shielding gaskets, electronic, identified by NSN 5999-01-341-6563, with a total estimated value of $7,796.00, split between two CLINs for 20 and 86 units respectively. Delivery is required by November 30, 2026, with a firm delivery location in Jacksonville, FL, and FOB Origin terms apply, requiring offerors to include all transportation costs to a contiguous U.S. destination. The solicitation, issued on August 3, 2026, with a response deadline of August 14, 2026, is managed by the Department of Defense’s Active Devices Division through the DIBBS electronic portal. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to contractors with approved JCP certification, completed DOD export training, and DLA authorization. All packaging and marking must comply with MIL-STD-129, RP001, and either ASTM D3951 for non-hazardous materials or FED-STD-313 with TQ IP025 for hazardous items, and barcoding must include NSN, contract number, and lot information. The contractor must adhere to NIST SP 800-171 cybersecurity requirements and DFARS 252.204-7012 for safeguarding covered defense information, and is subject to CMMC Level 2 certification for third-party assessment. The contract mandates use of WAWF for invoicing, requires submission of Safety Data Sheets, and applies FAR and DFARS clauses covering combating human trafficking, employment eligibility, sustainable products, hazard communication, cyber incident reporting, prohibited procurement from Chinese military companies, and whistleblower rights. Inspection and acceptance occur at the destination, and the government retains full authority over acceptance criteria. Offerors must provide UEI and CAGE codes, state their small business status, and affirm compliance with all applicable representations. No evaluation factors or award criteria are specified, and the basis of award will be determined by the contracting officer. All technical and quality requirements are derived from the DLA Master List, which takes precedence over commercial standards, and no formal attachments are listed, with reference materials incorporated by link only.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR NETWORK, FI
Solicitation # SPE7M1-26-T-246Q
The contract specifies the procurement of a fixed film resistor network with NSN 5905-01-127-7563 and part number M8340101M1801JA, governed by military specification MIL-PRF-83401H(4) and its Supplement 1, both dated May 29, 2024. The item is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, incorporating referenced technical and quality standards via R and I numbers. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and testing processes unless expressly approved in writing by the Contracting Officer, and this restriction overrides any conflicting specification requirements. The resistor must meet electrostatic discharge and electromagnetic interference protection standards per MIL-PRF-81705, requiring certified barrier packaging materials sourced from QPL-81705 approved manufacturers. Additional packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific controls for lead finish identification per IPC/JEDEC J-STD-609, mandating proper labeling on each unit package. ESD and physical protection for leads and terminals is required through cushioning and container design, even when not explicitly outlined in packaging codes. The contract calls for delivery of 10 units FOB origin within 80 days, with inspection and acceptance occurring at destination. No quantity variance is permitted. Packaging must include DOD-approved ESD/EMI materials, and all items must be handled and packaged at approved protective workstations. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-246Q, with a response deadline of August 14, 2026, and an original required delivery date of December 25, 2026.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7M1-26-T-248U
A check valve with NSN 4820-01-646-8828 and part number 509-700-112 is being procured in a quantity of 50 units under solicitation SPE7M1-26-T-248U, with a total contract value of $2,500 at $50 per unit. Delivery is required within five days of award, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any referenced standards. The item must be palletized in accordance with DLA packaging requirements and shipped to the designated military address at Yokosuka Naval Base, Japan, with the point of contact for inquiries being Misty Eckard. The original required delivery date is August 5, 2026, and the contract incorporates all applicable technical, quality, and packaging specifications from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M1-26-T-248N
A ball valve is being procured for use in the E/I hydraulic system with the NSN 4820-01-516-5621, quantity one, under purchase request 7017726989. This is a commercial off-the-shelf item, and the procurement is governed by DLA packaging requirements and technical and quality specifications referenced through the DLA Master List of Technical and Quality Requirements, where revisions are controlled based on the solicitation or award date depending on acquisition size. The item is subject to the requirement for removal of government identification from non-accepted supplies. Delivery must be completed within five days of award, with the place of performance specified as Jacksonville, Florida, zip code 32226-3404. The solicitation number is SPE7M1-26-T-248N, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332911 and the procuring agency is the U.S. Department of Defense through the Maritime Supply Chain. The primary point of contact is Misty Eckard, reachable via email and phone provided.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-249C
The contract is for the procurement of one fluid filter element with NSN 4330-01-534-4559 and part number 22201388 from CLARK EQUIPMENT CO, under solicitation SPE7M1-26-T-249C. Delivery is required within ten days to Fort Sill, Oklahoma, with FOB origin terms, and no variance in quantity is permitted. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, and packaging must reflect the specified QUP. Shipment must be made by the fastest traceable means, excluding parcel post, to the designated military facility with detailed marking instructions and a unique tracking identifier. The required delivery date is July 30, 2026, and the contract references specific technical and quality standards incorporated by reference from the DLA Master List, which governs all performance and compliance criteria. All government-specific identifiers, codes, and contact details are included for internal processing and tracking purposes, and the point of contact for the acquisition is Michael Reese of the Department of Defense’s Maritime Supply Chain.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-T-248K
The contract is for the procurement of a transformer, power, identified by NSN 5950000818787 and part number 9100-0342 from Keysight Technologies Inc, with a quantity of 30 units, each priced at $30.00, totaling $900.00. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging must meet MIL-STD-129 labeling standards, and if the item is classified as hazardous under FED-STD-313, it must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item is to be palletized according to RP001 standards, and the Unit of Issue is EA with a Quantity per Unit Pack of 001. Shipping instructions direct delivery to the Distribution Management Office at Camp Kinser, Japan, with the marked-for address identical to the shipping address. Transportation guidelines reference DLAD Proc Note C19 for general freight and C20 for first destination. The original required delivery date is July 31, 2026, and the contract is issued under solicitation SPE7M1-26-T-248K, with the NAICS code 335311 and managed by the Department of Defense’s Maritime Supply Chain. The point of contact is Ryan Snyder, with email and phone details provided for inquiries.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M1-26-T-248X
This contract requires the delivery of one power supply unit with NSN 6120-01-624-4579 under solicitation SPE7M1-26-T-248X, with a firm delivery deadline of 20 days from award and FOB origin terms. The item must comply with stringent environmental and material restrictions: Class I ozone-depleting chemicals are strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by specification. Mercury and mercury-containing compounds are banned from direct contact with the hardware except for specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. All packaging must adhere to ASTM D3951 and MIL-STD-129 standards, with palletization conforming to DLA’s RP001 requirements, and the Unit of Issue and Quantity per Unit Pack must match the contract exactly. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The unit is to be shipped to MCAS Futenma, Okinawa, Japan, with all shipping and transportation protocols governed by DLAD PROC Notes C19 and C20. The required delivery date is July 31, 2026, with no variance permitted in quantity.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333914
New
DIBBS
BEARING ASSEMBLY, PU
Solicitation # SPE7M1-26-T-248L
The contract is for one bearing assembly, part number 818404-000K, manufactured by Armstrong Pumps Inc, designated by NSN 4320-01-075-3027, intended for use on a booster pump in a Bell & Gossett HS-105 application. Delivery is required within 20 days from contract award, with shipment FOB destination and no tolerance for quantity variance. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for labeling, with no special marking required. Palletization follows DLA packaging requirements, and the item must be shipped to the specified FPO address for USNS SALVOR. The contract prohibits the use of ozone-depleting chemicals and strictly forbids the intentional addition of mercury or mercury-containing compounds except in narrowly defined exceptions such as functional components in batteries, fluorescent lights, or instruments approved by NAVSEA. If mercury is present in portable lamps or instruments, a second containment boundary and shockproof design are mandatory per NAVSEA 5100-003D. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. The contract is issued under the U.S. Department of Defense via DLA, with payment and logistics managed through designated DLA vendor systems and transportation protocols as defined in DLAD PROC NOTES C19 and C20. The required delivery date is July 30, 2026, and primary point of contact is Michael Reese at DLA.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
RING, CONTROL, FLUID
Solicitation # SPE7M1-26-T-249B
The contract pertains to the procurement of a RING, CONTROL, FLUID with NSN 4330-01-470-6033 and part number 7527, manufactured by Better Engineering Manufacturing Inc, under solicitation SPE7M1-26-T-249B. A single unit is required to be delivered within 20 days FOB destination, with no tolerance for variance in quantity. Delivery must be made to USS NEW YORK LPD 21 at FPO AA 34092 using the fastest traceable means, explicitly prohibiting parcel post. Packaging must comply with MIL-STD-2073-1E and marking in accordance with MIL-STD-129, with no special marking required. Palletization follows DLA packaging requirements, and the unit of issue is each. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Acceptance occurs at the destination point, and the original required delivery date is July 30, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or amendment date as applicable. The contracting officer is Michael Reese, reachable at michael.reese@dla.mil, and the solicitation was posted August 4, 2026, with a response deadline of August 17, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
BODY, VALVE
Solicitation # SPE7M1-26-T-249A
This contract specifies the procurement of two valve bodies identified by NSN 4820-01-416-7875 and part number J41548, supplied by approved vendors including INDUSTRIAL SERVICE AND SUPPLY, INC and PULSAFEEDER INC. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. The items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements outlined in MIL-STD-129, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, and any portable mercury-containing devices must include shockproof construction and secondary containment in accordance with NAVSEA 5100-003D. The delivery destination is Fort Eustis, Virginia, with shipments required to be sent via the fastest traceable means excluding parcel post. The contract falls under DLA’s technical and quality requirements referenced from the DLA Master List, and the acquisition is subject to the version of that list in effect on the solicitation issue date. The purchase request number is 7017722221 with a total price of $2.00 per unit, and the required delivery date is August 4, 2026. The contracting office is under the Department of Defense’s Maritime Supply Chain, with contract data managed through the DIBBS system and point of contact listed as Misty Eckard.
Industrial Valve Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
MEDIA CONVERTER, FIB
Solicitation # SPE7M1-26-T-249G
The contract is for the procurement of two fiber optic media converters under NSN 6030-01-568-3828, with a delivery requirement within 20 days after contract award. The solicitation number is SPE7M1-26-T-249G, issued by the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact. The offeror must comply with all DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with control determined by the solicitation issue or award date depending on acquisition size. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specified functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-approved chemical reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Any alternate offeror must provide a complete data package covering both the approved and alternate part, and all government identification must be removed from non-accepted supplies. The response deadline is August 17, 2026, with performance to occur at Augusta, Maine, ZIP 04333-0032.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
REPAIR KIT, VALVE
Solicitation # SPE7M1-26-T-248T
The contract is for a repair kit for a valve with NSN 4820-01-622-4438 and part number 0888830, supplied by Watts Regulator Co, under solicitation SPE7M1-26-T-248T. Two kits are required to be delivered within five days to a military destination in APO AE 09865-0061, with delivery terms FOB destination and zero tolerance for quantity variance. The items must be packaged and preserved in strict compliance with MIL-STD-2073-1E Appendix D for kits and marked in accordance with MIL-STD-129, with palletization following DLA packaging requirements. The repair kit must not contain any intentionally added mercury or mercury compounds except in specific exempted devices such as functional batteries or weapon systems, and portable fluorescent lamps or instruments containing mercury must have shock-proof housing and a secondary containment boundary as per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any phase of manufacture or processing is prohibited unless written approval is obtained from the contracting officer, and this restriction overrides all other specifications without diminishing product performance standards. Packaging data includes specific preservation methods and materials designated as ZZ, and the unit of issue is KT. Delivery is scheduled for August 3, 2026, with no flexibility on the required date. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The contract is managed under the Department of Defense’s Maritime Supply Chain, and point of contact is Misty Eckard.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334514
New
DIBBS
MONITOR, VOLTAGE DEV
Solicitation # SPE7M1-26-T-248P
The contract calls for the supply of one Voltage Monitor device, identified by NSN 6110-01-385-5413, under solicitation SPE7M1-26-T-248P, with a delivery requirement of 20 days after award. The item is part of a federal procurement managed by the Department of Defense’s Maritime Supply Chain, with performance designated to FPO, 96686. All technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The supplier must comply with DLA packaging standards, ensure proper measuring and test equipment is used, and remove any government identification from rejected items. The product must not contain intentionally added mercury or mercury compounds, except for functional uses in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, or specified chemical reagents. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier as per NAVSEA 5100-003D. No existing data package is available, so the alternate offeror must submit complete technical data for both the primary and alternate parts. The solicitation closes on August 17, 2026, and inquiries can be directed to Michael Reese at the provided contact information.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335312
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-248V
The contract is for one magnetic contactor with NSN 6110-01-682-7290 and part number MX52CD, supplied by Sensata Technologies, Inc., under solicitation SPE7M1-26-T-248V. Delivery is required within 10 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging is to be unitized in containment type D3 with preservative method 41 and packed under code U. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware unless part of approved exemptions such as batteries, fluorescent lamps, or weapon systems, and any portable devices containing mercury must be shock-proof with secondary containment as specified by NAVSEA 5100-003D. The delivery address is the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment governed by DLAD procedures C19 and C20. The contract is subject to DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The solicitation was posted August 4, 2026, with responses due August 17, 2026, and is classified under NAICS 335312 for electrical equipment manufacturing.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details