Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Government of Canada was posted on July 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Resistor,Variable,Nonwire Wound,Precision

Closed
W8482-275294/AInternational

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The Department of National Defence is seeking bids for two precision nonwire wound variable resistors, part number HRP11/1S/340/5K, manufactured by PENNY & GILES AEROSPACE LIMITED with NCAGE code K1474, under GSIN 5905. A total of 50 units are required, with 40 to be delivered to CFB Halifax and 10 to CFB Esquimalt. Bidders may propose equivalent or substitute products but must clearly specify the brand, model, part number, and NCAGE of the alternative offering. The procurement is subject to a preference for Canadian goods and services, and the Crown reserves the right to negotiate with suppliers after the submission deadline. All documentation may be submitted in either English or French. The solicitation, identified as W8482-275294/A, was posted on July 9, 2026, with responses due by 2:00 PM on July 24, 2026. It falls under NAICS code 334416 and is administered by the Government of Canada through the Department of National Defence. The point of contact for inquiries is Apurva Deshpande, reachable via email at apurva.deshpande2@forces.gc.ca. The delivery locations span British Columbia and Nova Scotia, reflecting the operational needs of the Canadian Forces at both coastal bases. This is a federal solicitation with no specified set-aside criteria, open to qualified suppliers meeting the technical and sourcing requirements.

General Info

40 resistors to CFB Halifax, 10 to CFB Esquimalt, Canadian preference, bid due July 24, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(9)

W8482-275294/A Request for Proposal for Variable Precision Resistor

PDFrfp

RFP W8482-275294/A Resistor, Variable, Nonwire Wound, Precision

PDFrfp

Annex OSD-Fr Offer Submission Details W8482-275294/A

PDFaward

Annex - Offeror Submission Details - W8482-275294/A

PDFannex

W8482-275294/A Annex Statement of Requirement and Offeror Submission Details

XLSXsow

Annex - Offeror Submission Details - W8482-275294/A

PDFannex-offeror-submission

Annex Statement of Requirement and Offeror Submission Details W8482-275294/A

XLSXsow

Solicitation W8482-275294/A Resistor Variable Nonwire Wound Precision

PDFrfp

W8482-275294A Annex Statement of Requirements and Offer Submission Details

XLSXsow

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
Contacts
Apurva DeshpandeContracting Authority

Full Description

Show more
NOTICE OF PROPOSED PROCUREMENT The Department of National Defence has a requirement for the items detailed below. The delivery is requested at CFB Halifax and CFB Esquimalt. Line Item: 001 RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION Part Number: HRP11/1S/340/5K NCAGE: K1474 PENNY & GILES AEROSPACE LIMITED GSIN: 5905 Quantity: 40 UoI: EA to be delivered to: CFB Halifax Line Item: 002 RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION Part Number: HRP11/1S/340/5K NCAGE: K1474 PENNY & GILES AEROSPACE LIMITED GSIN: 5905 Quantity: 10 UoI: EA to be delivered to: CFB Esquimalt Bidders proposing an Equivalent or a Substitute Product must indicate the brand name and model and/or Part Number and the NCAGE they are offering. The requirement is subject to a preference for Canadian goods and/or services. The Crown retains the rights to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 336411
International
Uncrewed Aircraft System - Light
Solicitation # W8703-270009/A
The Department of National Defence is soliciting a General Purpose Uncrewed Aircraft System (GPUAS) for light land forces, with the requirement to deliver a minimum of 80 systems by March 1, 2027, to 7 CF Supply Depot in Edmonton, Alberta. The system must support a broad spectrum of military operations including Intelligence, Surveillance, and Reconnaissance (ISR), force protection, targeting, strike missions, situational awareness, and training. Key technical specifications include a maximum take-off weight of 5 kg or less, an endurance of at least 30 minutes with an electro-optical/infrared payload, a dash speed exceeding 55 km/h, and a service ceiling of at least 8,000 feet ASL, all measured under ISA conditions. The system must comply with Canadian and international standards including ISO 2533:1975, DND and CF airworthiness directives, and must incorporate cybersecurity measures such as secure boot, authenticated software, no external kill switches, no undocumented data exfiltration pathways, and prohibit critical components manufactured in adversary nations, including flight controllers, radios, cameras, and ground control stations. The procurement follows a Phase Bid Compliance Process and is restricted to Canadian Suppliers who meet stringent eligibility criteria, including a permanent place of business in Canada, tax registration, and employment of Canadian personnel. Bidders are required to complete the Canadian Content Attestation Form to quantify Canadian Value-Added, which accounts for 25% of the award evaluation, alongside Technical Merit (50%) and Price-per-Unit (25%). The highest combined score determines award selection, with ties broken by the highest Canadian Value-Added score. All submissions must be in English or French and sent exclusively via email to tanya.mckenzie@forces.gc.ca by August 25, 2026. Bidders must structure proposals into three sections: Technical Offer, Financial Offer, and Offer Submission Forms, including mandated documents such as the Offeror Declaration and Canadian Content Attestation. Delivery must be made Delivered Duty Paid under Incoterms 2020 to the specified Edmonton location, with packaging adhering to environmentally preferred standards, ISPM 15 wood packaging rules, and controlled goods marking requirements. The contract is governed by the Defence Protections Act and includes warranty terms of 12 months post-acceptance, 30-day payment terms after invoice receipt, and potential late payment interest at the average rate plus 3
Aircraft Manufacturing

POSTED

8 days ago

DEADLINE

in 1 day
View Details
NAICS: 335311
International
1250 kVA Shore Power Autotransformer for CCG AOPS
Solicitation # RFQ-CCG-AOPS-2026-001
The Department of National Defence, on behalf of the Canadian Coast Guard, is seeking quotes for the design, manufacture, testing, and delivery of one 1250 kVA three-phase autotransformer. The equipment is required to convert 450 VAC primary shore power from Department of National Defence facilities to 600 VAC secondary power for Arctic and Offshore Patrol Ships. The unit must be copper-wound with Class 220 insulation, an impedance of less than 4 percent, and a CSA Type 3R enclosure finished in ANSI 61 grey. A critical requirement is that the transformer must fit within an ISO 668 Type 1C 20-foot freight container and not exceed a maximum weight of 8,000 kg to ensure compatibility with shipboard crane lifting capacities. The selected contractor must maintain an ISO 9001 certified Quality Management System and perform Factory Acceptance Testing at an ISO/IEC 17025 certified facility. Deliverables include the autotransformer and a comprehensive electronic PDF documentation package containing FAT reports, electrical schematics, arrangement drawings, and operation and maintenance manuals. Delivery is required within 14 weeks of contract award to the NC5 Jetty in Halifax, Nova Scotia, under Delivered Duty Paid terms. This request for quote is issued for planning and estimation purposes and does not constitute a formal offer or guarantee of a contract award.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

8 days ago

DEADLINE

in 4 days
View Details
NAICS: 337215
International
Static Shelving System
Solicitation # W0501-27-M040/A
The Department of National Defence is soliciting a firm fixed price contract for the supply, delivery, and installation of a modular static shelving system for the 5th Canadian Division Support Base Gagetown Personnel Support Services in Oromocto, New Brunswick. The required system totals 67.5 feet and consists of six specific sections ranging from 2 to 12 feet. Each section must feature nine open-face levels, two movable dividers per level, retractable work shelves, full perimeter panels, and hinged locking doors with padlock attachment points. All materials must be new and defect-free, with a final delivery and installation deadline of March 31, 2027. The procurement process utilizes a pass/fail technical evaluation based on mandatory criteria M1 through M11, followed by a financial evaluation in Canadian dollars. Delivery is required on a Delivered Duty Paid (DDP) Incoterms 2020 basis to Building J7, Room B234. The contract emphasizes environmental sustainability, requiring reusable, returnable, or recyclable packaging. While there are no specific security clearance requirements, the contractor must maintain accounting records for seven years post-payment and adhere to Canada's Code of Conduct for suppliers. Proposals must be submitted electronically to the contracting authority, Ann Marie MacDonald, by the specified deadline.
Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

9 days ago

DEADLINE

in 3 days
View Details