This Solicitation opportunity from Department Of Defense was posted on May 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RESTRAINT, HORIZONTA

Closed

SPE4A7-26-T-372QFederal

Submission Closed06/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336415

New

DIBBS

Manufacturing and Supply of Non-Magnetic Blade Covers

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-396B

Solicitation SPE7M4-26-T-396B is a total small business set-aside issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two crank pin rings. The required items are identified by NSN 2010012250170 and part number 106042025 from Bird-Johnson Propeller Company, LLC. This is designated as a critical application item with a required delivery date of July 27, 2027, and a need ship date of March 9, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including a magnetic permeability of 2.0 or less and a prohibition on the intentional addition of mercury per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows DLA requirement RP001. Administrative requirements include a CMMC Level 2 self-assessment, the use of the Wide Area WorkFlow system for invoicing, and compliance with the Buy American Act and Berry Amendment. All quotes must be submitted via the DIBBS system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-394H

This contract, solicitation number SPE7M4-26-T-394H, is a total small business set-aside issued by the Department of Defense Fluid Handling Division for the procurement of three units of a lifting device gear assembly, identified by NSN 2010010328950 and Timken part number 785E544-001. The requirement is managed under purchase request 7018270459 with a delivery timeline of 168 days after order. Delivery is set for FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The agreement incorporates several technical and quality mandates, including DLA packaging requirements RP001, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. Compliance with Cybersecurity Maturity Model Certification CMMC Level 2 and regulations regarding the restriction of mercury and mercury-containing compounds is required. The solicitation was posted on September 10, 2026, with a response deadline of September 21, 2026, and specifies a need ship date of March 9, 2027, and an original required delivery date of November 6, 2027.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-396K

This contract, identified by solicitation number SPE7M4-26-T-396K, is for the procurement of two gear slip rings under NSN 2010012891302. The items are identified as critical application items and correspond to Timken Gears and Services Inc part numbers 577L918-003 and 611C402-077. The procurement is managed by the Department of Defense Fluid Handling Division with a required delivery date of May 18, 2027, and a delivery window of 168 days. Shipping is set as FOB Origin with the final destination being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to several technical and quality standards, including DLA packaging requirements RP001, marking standards MIL-STD-129, and packaging data MIL-STD-2073-1E. It requires a Cybersecurity Maturity Model Certification Level 2 self-assessment and prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by NAVSEA specifications. All submissions and compliance must align with the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-395E

This contract, solicitation number SPE7M4-26-T-395E, is issued by the Department of Defense Fluid Handling Division for the procurement of one slip ring, part number 611C402-023, used on gear assemblies for main speed. The item is identified by NSN 2010010328954 and is associated with purchase request 7018270447. Delivery is required within 168 days after the order, with a need ship date of March 9, 2027, and an original required delivery date of August 22, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Key compliance requirements include CMMC Level 2 self-assessment, protection of covered defense information, and a prohibition on the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA. The procurement is subject to the Buy American Act and Berry Amendment, and it incorporates technical and quality requirements from the DLA Master List.

FLUID HANDLING DIVISION

POSTED

DEADLINE

SUPPORT, CONTROL HEAD

Solicitation # SPE7M4-26-T-397A

Solicitation SPE7M4-26-T-397A is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of ten units of Support, Control Head, identified by NSN 2010013793567. The requirement is categorized under NAICS 336415, with quotes due by September 21, 2026, via the DIBBS system. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of August 30, 2027, and a need ship date of March 9, 2027. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds unless specifically exempted. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program. Offerors must also provide representations regarding their socioeconomic status and the use of covered defense telecommunications equipment.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-390G

This contract, solicitation number SPE7M4-26-T-390G, is issued by the Department of Defense Fluid Handling Division for the procurement of seven blade covers, identified by NSN 2010-01-225-0164 and Bird-Johnson Propeller Company part number 106052036VM. This critical application item must meet specific technical standards, including a magnetic permeability of 2.0 or less and strict prohibitions against the intentional addition of mercury or mercury-containing compounds, per NAVSEA 5100-003D. The procurement falls under NAICS code 336415 and requires compliance with CMMC Level 2 self-assessment and covered defense information regulations. Delivery is specified as FOB Origin with a delivery window of 168 days after order, targeting a need date of March 9, 2027, and an original required delivery date of November 5, 2027. Supplies are to be shipped to DLA Distribution San Joaquin in Tracy, California. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. The contract incorporates the DLA Master List of Technical and Quality Requirements and mandates the removal of government identification from any non-accepted supplies.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-063G

Solicitation SPE7M0-26-T-063G, issued by DLA Land and Maritime, is for the procurement of five blade covers, identified by NSN 2010-01-225-0164 and Bird-Johnson Propeller Company part number 106052036VM. This critical application item requires a delivery timeframe of five days after order and is shipped FOB Origin, with inspection and acceptance occurring at the destination. The freight shipping address is located at US Naval Base Sasebo in Japan, while the parcel post address is an FPO in the same region. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-129 for marking and RP001 for DLA packaging. Key compliance requirements include a CMMC Level 2 self-assessment, restrictions on the intentional use of mercury, and a magnetic permeability of 2.0 or less. Additionally, the contractor must comply with the Berry Amendment and Buy American Act, and use the Wide Area WorkFlow system for invoicing. Quotes must be submitted via the DIBBS portal, and the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-384X

This contract is for the procurement of two lifting device gear assemblies, identified by NSN 2010010328950 and part number 785E544-001 from Timken Gears and Services Inc. The order is issued by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-384X and is designated as a total small business set-aside. Delivery is required within 20 days, with a final required delivery date of September 8, 2026, shipping FOB origin to the Trident Refit Facility in Kings Bay, Georgia. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking. Key compliance standards include CMMC Level 2 self-assessment, protection of covered defense information, and a prohibition on the intentional addition of mercury or mercury-containing compounds. Inspection and acceptance will occur at the destination, and the supplier must use the fastest traceable shipping means rather than parcel post.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010426QAD28

This contract is a solicitation for the manufacture of a stud, identified as part number 3165323 with cage code 10001. The procurement is managed by the Navsup Weapon Systems Support Mech under the Department of Defense and is designated as a total small business set-aside. Key requirements include a delivery period of 90 days and mandatory government source inspection per FAR 52.246-2. The contractor must adhere to specific technical standards, including ASME-Y14.5M and MIL-DTL-31000, and follow MIL-STD-130 for marking and identification. Quality assurance is the responsibility of the contractor, though the government reserves the right to perform inspections. Payment will be processed via Wide Area Workflow using a combined Invoice and Receiving Report. All technical drawings and specifications are accessible through the SAM.gov portal.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

14--LAUNCHING SHOE,GUID

Solicitation # SPE4A626T28NB

DLA Aviation is seeking quotes for the procurement of 20 units of Launching Shoe, GUID, identified by NSN 1440011083349. The items are to be delivered to DLA Distribution Jacksonville within 123 days after the order is received. Approved sources for this requirement include 27361 BP13742, 32067 14-82042-9, and 8X044 14-82042-9. This solicitation, numbered SPE4A626T28NB, is being conducted as a Request for Quote under NAICS code 336415. All interested and responsible sources must submit their quotes electronically by the deadline of September 17, 2026. No hard copies of the solicitation or technical drawings are available, and all inquiries should be directed to the buyer via the DIBBS portal.

POSTED

DEADLINE

Solicitation # N0010426QAD29

Solicitation NO0104-26-Q-AD29, issued by NAVSUP Weapon Systems Support on September 4, 2026, seeks quotes for the manufacture of Quick Release Pin, R (P/N: 7124396-001, CAGE: 53711, NIIN: LWO20253). The requirement is for a fixed-price award based on the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference for HUBZone small business concerns. Delivery is required within 90 days on an FOB Destination basis. Technical compliance is governed by drawing 7124396, which takes precedence over the contract text, as well as standards DOD-D-1000 B and ANSI-Y14.5M 82. The contract mandates Government Source Inspection per FAR 52.246-2 and requires the contractor to maintain inspection records for 365 days post-delivery. Packaging must adhere to MIL-STD-2073, with specific levels for CONUS and OCONUS shipments, and marking must comply with MIL-STD-130 and MIL-STD-129. Invoicing is processed electronically through the Wide Area WorkFlow system using a combined Invoice and Receiving Report. Additional requirements include compliance with CMMC cybersecurity levels, DFARS domestic source restrictions, and the submission of Safety Data Sheets for any hazardous materials.

Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 24 days

AI Contract Overview

The contract solicitation SPE4A7-26-T-372Q seeks two units of a horizontal restraint identified by NSN 1450-01-154-6125, to be delivered FOB destination to New Cumberland, PA by November 8, 2026, with a full delivery window of 165 days from solicitation issuance. The item must conform to Reference Drawing NR 81205 232-36356 Revision B dated October 17, 1984, and technical specifications from the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards. All supplies must be packaged and marked per MIL-STD-129 and palletized according to DLA’s RP001 requirements; unit identification is not required per customer request. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors approved by DLA with JCP certification and completed training may access the data. Inspection and acceptance occur at destination per FAR 52.246-2, with sampling following MIL-STD-1916 or ASQ H1331 Table 1, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with unspecified attributes treated as major. The solicitation is issued under the DLA Master Solicitation for Automated Simplified Acquisitions Revision 104 and is governed by numerous FAR and DFARS clauses, including those mandating System for Award Management maintenance, cyber compliance with NIST SP 800-171, anti-trafficking measures, employment eligibility verification, hazardous material disclosure, and sustainable product requirements. The Berry Amendment and Buy American Act apply, restricting non-domestic sourcing. Payment must be processed via Wide Area Workflow, with invoice and receiving reports submitted electronically, and fast pay unavailable unless FAR 52.213-1 is included. Offers are disqualified if the item is produced using additive manufacturing. Contractors must maintain current SAM registration, validate socioeconomic and small business representations, and disclose use of covered defense telecommunications equipment. A single point of contact, Tasia Carney, is designated for inquiries, and compliance with all special requirements—including prohibition of hexavalent chromium and mandatory arbitration restrictions—is enforced.

General Info

Procurement of two horizontal restraints, delivery in 165 days, DLA contract with cybersecurity and export controls.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336415 - Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A7-26-T-372Q

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 29

Solicitation

Response DeadlineJun 3

Deadline has passed

Submission Closed

06/03/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressUSA

Contacts

TASIA CARNEY

contact@example.gov

+1 (555) 000-0000

Full Description

RESTRAINT,HORIZONTA
RESTRAINT,HORIZONTA
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1450-01-154-6125 Quantity: 2 EA Purchase Request: 7016751635QTY: 2 Delivery: 165 days ADO