Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RETAINER, PACKING

Active
SPE7M4-26-T-270AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three retainer, packing items identified by NSN 5330-01-453-1018, with a total purchase request quantity of 96 units, to be delivered within 246 days after order. The item is classified as a commercial item and must be packaged in a medium duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against ultraviolet degradation. All supplied items must be free of asbestos, with any alternative materials requiring approval under Clause L30 and Provision 4 conditions. Packaging and identification must comply with MIL-STD-130N for U.S. military property marking, and government identification must be removed from non-accepted supplies. The procurement is subject to DLA packaging requirements and cybersecurity maturity model certification level 2 by a certified third-party assessment organization. Technical and quality specifications referenced in the DLA Master List apply, with the controlling revision dependent on the nature of the acquisition and applicable dates. Delivery is to be made to Texarkana, Texas, under solicitation SPE7M4-26-T-270A, with responses due by July 30, 2026, and the primary point of contact is Blake Tushar of the Fluid Handling Division within the Department of Defense.

General Info

Procure 96 retainer packing items, MIL-DTL-117 Type II packaging, no asbestos, DLA compliance, deliver to Texarkana by 246 days.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-270A for Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RETAINER,PACKING
RETAINER, PACKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-01-453-1018 Quantity: 3 EA Purchase Request: 7011614899QTY: 96 Delivery: 246 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
Retainer, Packing Manufacturing and SupplyThe contract calls for the manufacture and supply of 93 units of Retainer, Packing with NSN 5330-01-453-1018, all of which must meet military specification MIL-DTL-117 for packaging that resists UV exposure, grease, and water. The delivery must be performed to the designated place of performance in Texarkana, Texas, with a ZIP code of 75507-5000. The solicitation is structured as a subcontract under the Department of Defense’s Fluid Handling Division, and it is classified under NAICS code 339991, indicating it falls within miscellaneous manufacturing. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, indicating a narrow window for submissions. All offerings must comply fully with the military packaging standards to ensure durability and operational readiness under demanding environmental conditions.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Gasket Supply (NSN 5330002220143 / Part 2P3760)The contract involves the supply of twelve commercial off-the-shelf gaskets identified by NSN 5330002220143 and part number 2P3760, to be delivered to Fort Eustis, Virginia under a Department of Defense delivery order. No fabrication, assembly, or customization is required, as the items are standard commercial products meeting established specifications. The contract is structured as a subcontract and falls under the NAICS code 339991, which pertains to other miscellaneous manufacturing. The Defense Logistics Agency is the responsible organization, indicating the procurement is part of the broader DOD supply chain management. The solicitation was posted on July 19, 2026, and the procurement is being processed through the DIBBS system with a specific award reference for tracking and fulfillment.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Preformed Packing Material ManufacturingThe contract calls for the manufacture of a single unit of preformed packing material identified by NSN 5330-01-094-5995, must meet stringent military standards for durability, shelf life, and hazardous material handling to ensure operational readiness and safety in defense applications. The item is required to comply with all applicable federal and military specifications covering material composition, structural integrity, and environmental resistance, with strict adherence to shelf life protocols to prevent degradation before deployment. The solicitation is categorized as a subcontract under NAICS code 339991 and was posted on July 19, 2026, with responses due by July 30, 2026. Performance of the work is designated for Portsmouth, with a zip code of 03801-5000, and the acquiring organization is the Maritime Supply Chain ESOC Buys under the Department of Defense. All deliverables must align with the procurement guidelines of the Defense Logistics Agency, as indicated by the DIBBS solicitation link, and the contractor is expected to provide full documentation certifying compliance with all military and hazardous material regulations without deviation.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Small Business Prime Contractor for Set-Aside ContractThe contract requires a small business to serve as the prime contractor under a Total Small Business Set-Aside established under FAR 19.5, exclusively for the delivery of a wiper ring identified by NSN 5330013246700. As the prime, the selected entity assumes full responsibility for end-item delivery, strict adherence to all federal regulatory requirements, and effective oversight of any subcontractors involved in production or fulfillment. The NAICS code 339991 applies, indicating the scope pertains to other miscellaneous manufacturing, and the procurement is managed by the Department of Defense through the Land Supply Chain office. All work must comply with the stringent guidelines of a Total Small Business Set-Aside, meaning only small businesses may be awarded the contract, and no large businesses may be included at any tier. The solicitation was posted on July 19, 2026, with responses due by August 3, 2026, and the place of performance and point of contact details are not specified, though the procurement is accessible through the DIBBS portal.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
Supply of CAP, Filler Opening (NSN: 2590001011685)The contract mandates the procurement, packaging, and delivery of a single military-grade filler opening cap identified by NSN 2590001011685, destined for Prince Sultan Air Base in Saudi Arabia. Delivery is structured under FOB Origin terms, meaning the seller assumes responsibility for the item only until it leaves their facility, after which all transportation risks and costs transfer to the buyer. Compliance with all Defense Logistics Agency logistics and marking standards is strictly required, ensuring the item meets federal military specifications for identification, labeling, and documentation throughout the supply chain. The procurement is classified as a subcontract under NAICS code 339991, reflecting its placement within other miscellaneous manufacturing, and is administered by the Department of Defense through the Defense Logistics Agency, with no set-aside provisions or small business preferences indicated. The contract was posted on July 19, 2026, and is linked to the DIBBS system under award reference SPE7LX26FB00K.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Preformed Packing Item SupplyThe contract calls for the manufacture or supply of preformed packing items that meet the military specification identified by NSN 5330-01-445-0333, with a strict requirement that all materials be free of asbestos and substituted only with approved alternative materials. These components are critical for sealing applications in defense equipment and must comply with stringent military standards to ensure performance, durability, and safety under operational conditions. The work is classified as a subcontract under NAICS code 339991, indicating it falls within the category of other miscellaneous manufacturing, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, with a firm response deadline of July 30, 2026, allowing potential suppliers a limited window to submit proposals. The contracting organization is listed as LAND SUPPLIER OPNS VEHICLE SPT under the Department of Defense, underscoring the military nature of the procurement. While no specific set-aside designation or point of contact is provided, the contract is accessible through the DIBBS system via the provided URL, and all submissions must adhere to the technical and compliance requirements outlined in the military specification without exception.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Manufacturing of Seals, Plain Encased (NSN 5330-01-170-2933)The contract requires the manufacture of 68 plain encapsulated seal units meeting MIL-DTL-117, TYPE II, CLASS C, STYLE 1 specifications, designated by NSN 5330-01-170-2933. These seals are for defense applications and must adhere strictly to the military standard for material, dimensional tolerances, performance, and environmental durability. The work is classified as a subcontract under NAICS code 339991, indicating specialized manufacturing in other miscellaneous fabrication. Performance is designated for New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and the solicitation is issued by the Department of Defense under the Land Supplier Operations Vehicle Support organization. The opportunity was posted on July 19, 2026, with a response deadline of July 30, 2026, requiring proposers to submit technical and commercial proposals within this window to be considered. Failure to meet specification criteria or delivery timelines will result in rejection or contractual penalties.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RING SETThe contract pertains to the procurement of an O-RING SET identified by NSN 5331-01-612-7769, with a quantity of two units, under solicitation SPE7L1-26-T-849B. Delivery is required within five days of award, and the item must be packaged and sealed in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against ultraviolet degradation, a requirement applicable to direct vendor delivery, foreign military sales, and stock shipments. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a subsequent amendment supersedes it. The contract falls under NAICS code 339991, is managed by the Department of Defense’s Land Supply Chain, and is open for response until July 30, 2026, with primary point of contact Kristina Derry reachable via email and phone for inquiries.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RINGThe contract specifies the procurement of an O-RING with NSN 5331-15-163-3104, quantity of 32 units, under solicitation SPE7L1-26-T-849G. The item is classified as a critical application component and must comply with strict packaging requirements outlined in MIL-DTL-117, Type II, Class C, Style 1, mandating medium duty, waterproof, greasedproof, opaque bagging to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The item must be free of asbestos per FED-STD-313 and cannot contain mercury or mercury compounds except in specific functional exceptions like batteries, fluorescent lights, sensors, weapon systems, or approved chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging standards. Delivery is required within five days FOB origin with zero variance allowed, inspection and acceptance point at origin, and the item is destined for the General Depot of Naval Supplies in Kaohsiung, Taiwan. The contract specifies the unit of issue as EA, with a total quantity of 32, and the original required delivery date is set for July 21, 2026. All technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to the procurement of 13 gaskets under NSN 5330-01-431-3335, with delivery required within 53 days of award. All supplies must comply with DLA packaging requirements as defined in the DLA Master List of Technical and Quality Requirements, incorporating referenced technical and quality standards identified by R or I numbers. The gaskets must be packaged in a medium duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical analysis reagents as authorized by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and equipped with a secondary containment boundary per NAVSEA 5100-003D. The items must be entirely free of asbestos, with previously listed asbestos-containing codes or part numbers no longer acceptable, and any substitutions require approval under Clause L30 and Provision 4 conditions. The solicitation number is SPE7L3-26-T-123L, issued on July 19, 2026, with a response deadline of July 30, 2026, under NAICS code 339991, managed by the Department of Defense’s Land Supplier Operations Vehicle Support office, with performance delivery to New Cumberland, PA 17070-5002 and primary point of contact Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract solicitation SPE7L1-26-T-849X is for the procurement of one gasket, identified by NSN 5330-01-024-4653, under a simplified acquisition framework with a delivery requirement of five days after order placement. The item must be delivered FOB destination to either FPO AP 96349 or Yokosuka Naval Base in Japan, with the contractor bearing all transportation costs and risks until final delivery. Packaging must conform to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag, and all packaging data must comply with MIL-STD-2073-1E, including specific codes for preservation method, wrapping, and unit container type. Palletization must meet DLA RP001 requirements, and marking and barcoding must adhere to MIL-STD-129, with both linear and 2D barcodes required for logistic tracking. The item prohibits any asbestos as defined in Fed-Std-313 and mandates compliance with OSHA’s Hazard Communication Standard for labeling hazardous materials, including radioactive substances exceeding specified activity thresholds. The contract incorporates multiple DFARS and FAR clauses governing cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, whistleblower rights, and prohibitions on covered defense telecommunications equipment, with several clauses subject to deviation authorizations. Offerors must provide valid UEI and CAGE codes if supplying covered telecommunications items and must certify their small business status, including HUBZone, SDVOSB, or WOSB affiliations, through SAM. Proposals must be submitted electronically via DIBBS by July 30, 2026, and payment requests must be processed exclusively through WAWF using approved document types. Inspection and acceptance occur at the destination point under FAR 52.246-1, with government authority responsible for final acceptance. Although pricing details are incomplete and the contract value cannot be determined, evaluation is expected to prioritize technical compliance with referenced standards and R/I numbers alongside price, with possible HUBZone price preferences applying. No formal evaluation factor weights or trade-off methodology are specified, suggesting a potential LPTA approach.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMEDThe contract pertains to the procurement of 44 units of packing, preformed, with NSN 5330-01-028-0646, under solicitation SPE7M4-26-T-269U, issued by the Department of Defense’s Fluid Handling Division. This is a total small business set-aside under FAR 19.5, with a NAICS code of 339991, and requires delivery within 106 days of award. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, as defined by R or I numbers, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The product must contain no asbestos as per FED-STD-313, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or NAVSEA-approved chemical reagents. Portable lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary per NAVSEA 5100-003D. The place of performance is New Cumberland, PA, 17070-5002, and all supplies must be delivered without government identification if rejected. The primary point of contact is Blake Tushar, reachable via email and phone, with responses due by July 30, 2026.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Logistics and FOB Origin Delivery to DLA New CumberlandThe contract involves the transportation and delivery of packaged bearings from the origin point to DLA Distribution in New Cumberland, Pennsylvania, under FOB Origin terms, meaning responsibility and risk transfer to the buyer once the goods are loaded at the origin. The work falls under NAICS code 484220, indicating it is a freight transportation service, and is classified as a subcontract within the Department of Defense’s Fluid Handling Division. Delivery must be completed to the specified destination with zip code 17070-5002, and the offeror must respond by the deadline of July 30, 2026. The solicitation was posted on July 19, 2026, and is accessible through the DIBBS system for qualified bidders. No set-aside provisions or specific organizational type requirements are indicated.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazardous Materials ComplianceThe contract requires specialized packaging, labeling, and hazardous materials compliance for stave-shaped bearings intended for delivery to the Defense Logistics Agency. These bearings must meet stringent military standards, ensuring safe handling, transport, and storage throughout the defense supply chain. All packaging solutions must adhere to applicable Department of Defense regulations, including proper hazard communication protocols, accurate labeling per federal and international guidelines, and documentation that supports traceability and material integrity under operational conditions. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical area where the work must be executed or coordinated. The contract is classified as a subcontract under NAICS code 561910, which relates to waste collection and other support services, suggesting the work may involve logistics and compliance services rather than manufacturing. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, leaving a narrow window for qualified vendors to submit proposals. The contracting activity falls under the Fluid Handling Division of the Department of Defense, emphasizing the technical precision and regulatory rigor expected from the contractor.
Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332998
New
DIBBS
Manufacture and Supply of Stave-Shaped BearingsThe contract requires the manufacturing, quality inspection, packaging, labeling, and delivery of 15 stave-shaped bearings that must fully comply with military and federal technical specifications. All work must be performed to exacting standards to ensure operational reliability in defense applications, with quality control processes integrated at every production stage. The bearings are to be delivered to the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and must meet all applicable regulatory and documentation requirements for defense-grade components. This is a subcontract under the Department of Defense's Fluid Handling Division, classified under NAICS code 332998 for other miscellaneous fabricated metal product manufacturing. The opportunity was posted on July 19, 2026, with a firm response deadline of July 30, 2026, allowing potential offerors a short window to prepare and submit proposals. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors regardless of business size or certification status. The submission must be made through the DIBBS portal using the provided link, and all deliverables must be completed in alignment with the technical and contractual obligations outlined by the procurement authority.
Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 483111
New
DIBBS
Transportation of Supplies by SeaThe contract involves the sea transportation of packaged hose assemblies in strict compliance with DFARS 252.247-7023, requiring full adherence to defense logistics standards for international maritime shipping. All shipments must include complete customs documentation, proper containerization, and active coordination with Defense Logistics Agency logistics offices to ensure seamless delivery to the designated performance location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, with the NAICS code 483111 specifically identifying the maritime cargo transport industry. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, and is managed by the Fluid Handling Division under the Department of Defense. All aspects of the transportation process must meet military specifications, including secure packaging, traceable logistics tracking, and compliance with U.S. defense supply chain protocols. The contract does not specify a point of contact or exact port of departure or arrival, but execution must align with the established DLA logistics network, emphasizing timely, secure, and fully documented delivery to support defense operations.
Deep Sea Freight Transportation

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging and Marking ServicesThe contract requires compliance with MIL-STD-129 standards for the packaging, marking, and labeling of hose assemblies, including the generation of barcodes and the proper application of hazardous material indicators as mandated. All work must be performed to meet exacting military specifications to ensure traceability, safety, and readiness during logistics and deployment. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses are eligible to submit proposals, in alignment with FAR 19.5. The North American Industry Classification System code 493190 identifies the work within the warehousing and storage sector, specifically tied to the handling of military-related logistics. The contract is issued by the Fluid Handling Division within the Department of Defense, with performance required at a facility in New Cumberland, Pennsylvania, ZIP code 17070-5002. Proposals must be submitted by the deadline of July 30, 2026, and the opportunity was posted on July 19, 2026, allowing for a twelve-day response window. The contract type is a subcontract, indicating it is likely part of a larger prime contract for military supply chain support. Interested parties can access the full solicitation through the DIBBS system using the provided link, and all work must ensure full adherence to defense logistics protocols without exception.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks specialized services to ensure full compliance with OSHA hazard communication standards through the preparation of Safety Data Sheets, design of compliant hazard warning labels, and accurate submission procedures aligned with DFARS and MIL-STD-129 requirements. These services are critical for the safe handling, storage, and transport of hazardous materials within defense-related operations, requiring adherence to federal regulatory frameworks and military-specific documentation protocols. This is a Small Business Set-Aside subcontract under NAICS code 541690, open exclusively to small businesses, with a response deadline of July 30, 2026. The work is performance-based at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, under the jurisdiction of the Department of Defense's Fluid Handling Division. All deliverables must support defense logistics and supply chain integrity by meeting stringent labeling and documentation mandates, ensuring workforce safety and regulatory compliance across military supply networks.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Precision Metal Hose Assembly ManufacturingThe contract requires the manufacture and delivery of 14 metal hose assemblies equipped with female end fittings and 90-degree elbows, all fabricated strictly in accordance with military engineering drawings. Each assembly must be produced using certified materials and undergo rigorous quality inspection to ensure compliance with defense standards. Packaging must adhere to MIL-STD-129 requirements, ensuring proper labeling, handling, and traceability throughout the supply chain. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The NAICS code 332999 indicates this falls under other fabricated metal product manufacturing, with performance located in New Cumberland, PA, at a ZIP code of 17070-5002. Bids must be submitted by July 30, 2026, and the opportunity was posted on July 19, 2026, under the oversight of the Fluid Handling Division within the Department of Defense.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 483111
New
DIBBS
Domestic Ocean Transportation of SuppliesThis contract entails the domestic ocean transport of finished goods via U.S.-flag vessels, with strict adherence to the regulatory requirements of FAR 52.247-27 and DPAS DX/DO priority ratings. The transportation services must ensure timely and compliant movement of supplies under the Department of Defense’s Fluid Handling Division, with performance centered in Texarkana, Texas, ZIP 75507-5000. Subcontractors are expected to meet all federal transportation mandates, including vessel flagging and priority rating compliance, to support critical defense logistics. The solicitation, posted on July 19, 2026, requires responses by July 30, 2026, under NAICS code 483111 for deep sea, coastal, and Great Lakes water transportation, with no set-aside designation specified, leaving eligibility open to qualified contractors without preferential categories.
Deep Sea Freight Transportation

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) Coordination and SubmissionThe contract requires the coordination and execution of First Article Testing (FAT) in compliance with FAR 52.209-3, ensuring that all sample testing is conducted according to specified military and federal standards. This includes generating complete documentation, validating test results, and submitting deliverables through designated Department of Defense systems such as WAWF. The work must be performed to guarantee that the initial production articles meet all design, performance, and quality requirements before full-scale manufacturing proceeds. The testing obligations are comprehensive, covering not just execution but also end-to-end administrative coordination to ensure regulatory adherence and timely submission. The contract is a subcontract under the NAICS code 541380 and is managed by the Fluid Handling Division within the Department of Defense. Performance is required at a specified location in Texarkana, with a zip code of 75507-5000. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026. While no set-aside designation or point of contact is listed, the requirement is time-sensitive and centered on technical accuracy and system compliance, making precise adherence to deadlines and DoD reporting protocols critical for successful contract fulfillment.
Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Handling and SDS ComplianceThe contract requires comprehensive support for the safe handling of hazardous chemicals and the accurate preparation of Safety Data Sheets in full compliance with OSHA’s 29 CFR 1910.1200 regulations. This subcontract, issued by the Department of Defense’s Fluid Handling Division, is focused on ensuring that all chemical handling procedures meet federal safety standards and that SDS documentation is complete, current, and properly formatted to protect personnel and maintain regulatory adherence. The work must be performed at the specified location in Texarkana, Texas, with a zip code of 75507-5000, and aligns with NAICS code 541620, indicating services related to environmental, health, and safety consulting. The solicitation was posted on July 19, 2026, with proposals due by July 30, 2026, and is intended for subcontractors capable of delivering technical expertise in chemical safety and documentation.
Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 323120
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, labeling, and marking services strictly aligned with MIL-STD-129 and MIL-STD-130N standards, ensuring all military shipments meet federal specification requirements. A critical component includes the application of durable Unique Item Identification (UID) markings on all items, guaranteeing traceability and compliance across the supply chain. Packaging must also utilize MIL-DTL-117 compliant bags, which are designed to protect contents under demanding environmental and handling conditions. This work is classified as a subcontract under NAICS code 323120 and is associated with the Department of Defense’s Fluid Handling Division, with performance mandated to occur in Texarkana, Texas, at the specified ZIP code 75507-5000. The solicitation opened on July 19, 2026, with a firm response deadline of July 30, 2026.
Support Activities for Printing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details