Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RETAINER, PACKING

Active
SPE7M2-26-T-6352Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation for the procurement of 887 units of packing retainers, identified by NSN 5330-00-171-5898. The item is classified as a commercial critical application item and must adhere to technical specifications MS28782-41 and SAE AS8791D. Delivery is required within 40 days after the order, with a shipping destination of the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Specifically, items must be sealed in waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions. Inspection and acceptance will take place at the destination.

General Info

Procurement of 887 packing retainers for DLA New Cumberland within 40 days.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-6352.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUSA
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RETAINER,PACKING
RETAINER, PACKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC SPEC NR MS28782E NOT 2 REVISION NR E DTD 08/12/2020 PART PIECE NUMBER: MS28782-41
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD SAE AS8791D (R2025) REVISION NR D DTD 01/01/2020 PART PIECE NUMBER:
SPE7M2-26-T-6352
SECTION B
PR: 7017939134 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017939134 0001 EA 887.000
NSN/MATERIAL:5330001715898
DELIVERY (IN DAYS):0040
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:050 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
SPE7M2-26-T-6352
SECTION B
PR: 7017939134 PRLI: 0001 CONT’D
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/11/2026 Original Required Delivery Date:03/23/2027
SPE7M2-26-T-6352 NSN/Part Number: 5330-00-171-5898 Quantity: 887 EA Purchase Request: 7017939134QTY: 887 Delivery: 40 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9591
This solicitation is for the procurement of 41 units of plain encased seals under NSN 5330-01-161-4070 for the Department of Defense Strategic Acquisition Program Directorate. The contract is a total small business set-aside with a delivery requirement of 139 days after receipt of order. Compliance with DLA packaging requirements, MIL-STD-130N for identification marking, and a strict prohibition against the use of Class I ozone depleting chemicals is mandatory. The contract includes rigorous security and regulatory requirements, including CMMC Level 2 certification and the protection of covered defense information. Because the item contains technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires to access the data. All technical and quality requirements are governed by the DLA Master List.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL SUB ASSY, HYDRA
Solicitation # SPE7LX-26-U-9588
This solicitation from the Department of Defense Strategic Acquisition Program Directorate is for the procurement of 247 units of the Seal Sub Assy, Hydra, identified by NSN 5330-00-891-3207. The contract requires delivery within 65 days after the order is placed. The procurement is governed by the DLA Master List of Technical and Quality Requirements, specifically incorporating standards RA001, RP001, and RQ011. Strict material and packaging standards are mandated, including the use of medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to protect against ultraviolet rays. The supplied items must be entirely free of asbestos and must not contain intentionally added mercury, except for specific functional exceptions approved by NAVSEA. All supplies must also comply with government identification removal protocols for non-accepted items.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-983Z
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of one gasket under National Stock Number 5330-01-558-5798. The contract requires delivery within 20 days after receipt of order and specifies performance in Virginia Beach. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific packaging standards under RP001 and identification marking per MIL-STD-130N. Strict material constraints are in place, explicitly prohibiting the intentional addition of mercury or mercury-containing compounds and requiring that all supplied items be free of asbestos. To prevent deterioration from ultraviolet rays, the end item must be packaged in a medium duty, waterproof, greaseproof, and opaque bag according to MIL-DTL-117. These requirements apply across direct vendor delivery, foreign military sales, and stock shipments.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, SEAL
Solicitation # SPE4A5-26-T-374Q
This federal solicitation, issued by the Department of Defense ASC Supplier Oper OEM Division, is for the procurement of 143 seal retainers under NSN 5330-01-507-5395. The contract requires strict adherence to MIL-STD-130N for identification marking and prohibits the use of asbestos as defined in FED-STD-313. Performance is set for Tinker AFB, with a required delivery timeline of 23 days after the order is received. The solicitation, identified by number SPE4A5-26-T-374Q, falls under NAICS code 339991. Interested parties were required to respond by August 26, 2026. The primary point of contact for this requirement is Renee Wassum.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL
Solicitation # SPE7LX-26-U-9608
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 14 seals under part number 5330-01-311-3818. The contract is a total small business set-aside under NAICS code 339991, with a required delivery timeframe of 97 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements, identification marking of U.S. military property per MIL-STD-130N, and a total prohibition of asbestos. Additionally, the provider must comply with Covered Defense Information standards and complete a Cybersecurity Maturity Model Certification Level 2 self-assessment. All technical and quality requirements are governed by the DLA Master List based on the solicitation or award date.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE4A5-26-T-373C
This contract is for the procurement of eight preformed grease packing units, identified as Honeywell International Inc. part number 2609655 and NSN 5330-01-297-3587. The item is classified as a commercial critical application item and must be free of asbestos. Delivery is set for FOB Origin with a required delivery date of May 29, 2027, shipping to the DLA Distribution Depot Hill at Hill AFB, Utah. The agreement mandates strict adherence to several military standards, including MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Because the item is susceptible to ultraviolet rays, it must be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Additionally, the contractor must comply with CMMC Level 2 self-assessment and covered defense information requirements.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L1-26-T-983L
This contract is for the procurement of two plain seals, identified by NSN 5330015048187, under solicitation SPE7L1-26-T-983L. The items must be delivered within five days of the order, with shipping handled via the fastest traceable means to designated locations in Barstow and Yermo, California. Delivery is FOB Origin, and inspection and acceptance will occur at the destination. Due to the potential for deterioration from ultraviolet rays, the seals must be packaged in medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 standards. All packaging, marking, and palletization must adhere to MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements, specifically including a do not bend marking. The contract incorporates technical and quality requirements from the DLA Master List and excludes these items from the First Destination Packaging Program.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-985W
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of one gasket under part number 5330-01-648-7592. The contract requires delivery within 20 days after the order is received and specifies that the place of performance is Port Hueneme, California. The agreement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract mandates the removal of government identification from any non-accepted supplies. The solicitation was posted on August 18, 2026, with a response deadline of August 31, 2026.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-987V
This contract is for the procurement of 567 O-rings, identified by NSN 5331-01-217-3254 and Marotta Controls Inc part number 4400891-1194. The order is issued under solicitation SPE7L1-26-T-987V by the Department of Defense Land Supply Chain. Delivery is required within 59 days after order, with a required delivery date of May 31, 2026, and a need ship date of August 4, 2026. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, specifically prohibiting the use of asbestos as defined in FED-STD-313. Packaging must comply with MIL-STD-2073-1E and RP001, with a specific requirement to seal the items in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. Inspection and acceptance will take place at the destination, and marking must follow MIL-STD-129.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE4A5-26-T-372Q
This contract is a solicitation for the procurement of 12 units of preformed packing, identified as a critical application commercial item with NSN 5330012973586 and Honeywell part number 2609654. The agreement specifies a delivery timeline of 171 days and requires the items to be delivered FOB Origin, with inspection and acceptance occurring at the destination. The contract strictly prohibits the use of asbestos and mandates a zero percent quantity variance. Compliance is required across several technical and quality standards, including MIL-STD-129 for marking and MIL-DTL-197M for preservation, packaging, and packing. Specific packaging requirements include the use of medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, and the contractor must adhere to DLA packaging requirements for procurement.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L4-26-T-6378
This contract is for the procurement of one plain seal, identified by NSN 5330016522982 and part number 2614768C1, under solicitation number SPE7L4-26-T-6378. The order is issued by the Department of Defense through the LSO Combat Vehicles and Armament agency. Delivery is required within 20 days, with an original required delivery date of August 13, 2026. The item is to be delivered FOB Origin and will be inspected and accepted at the destination. The shipment is destined for Naval Construction Group One in Port Hueneme, California. Packaging and marking must strictly adhere to MIL-STD-129 and RP001 DLA packaging requirements, with specific instructions to use the fastest traceable means of shipment and a prohibition on using parcel post. The contract incorporates technical and quality requirements from the DLA master list and requires the removal of government identification from any non-accepted supplies.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L1-26-T-982E
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of two plain seals under part number 5330-14-518-7003. The contract requires delivery within five days after the order is placed and is governed by specific technical and quality requirements, including DLA packaging standards and the removal of government identification from any non-accepted supplies. The solicitation, identified as SPE7L1-26-T-982E, was posted on August 18, 2026, with a response deadline of August 31, 2026. Performance is located in Solomons, and the primary point of contact for this federal acquisition is Kristina Derry.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M2-26-T-6353
This contract is for the procurement of 142 electrical receptacle connectors, identified by NSN 5935-00-086-8922 and part number M2726/37-001. The items are designated as critical application items and must comply with MIL-DTL-2726/37G(1) and MIL-DTL-2726C(1) specifications. The agreement includes a First Article Test requirement and mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Key restrictions include a prohibition on the intentional use of mercury or mercury-containing compounds and the use of Class I ozone-depleting substances without written approval. Delivery is set as FOB Origin with inspection and acceptance also occurring at the origin. The supplies are to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of April 15, 2027.
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE7M2-26-T-6361
This contract, identified as SPE7M2-26-T-6361, is a solicitation for the procurement of 12 plain plate nuts, identified by NSN 5310-01-656-7321 and part number FSU-1401PD from Fastener Specialty, Inc. The order is issued by the Department of Defense Nuclear Reactor Program with a required delivery date of April 13, 2027, and a delivery window of 164 days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes critical environmental and quality restrictions, specifically prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the delivery.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-Q-0762
This contract is for the procurement of 16,304 lock washers, identified by NSN 5310-00-933-8120 and part number MS35338-138. The order is a firm fixed price agreement with a delivery timeline of 171 days after order. Supplies must adhere to technical standards including ASME B18.21.1 and NASM35338, and are designated as critical application items. Delivery and acceptance will take place at the destination, specifically the DLA Distribution Barstow Central Receiving Warehouse. The contract mandates strict compliance with DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. There is a strict prohibition on the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331. This is a total small business set-aside procurement under the Nuclear Reactor Program of the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE7M2-26-T-6357
This contract is for the procurement of 204 self-indicating bimetallic thermometers, identified by NSN 6685-01-350-0019. The items are designated as critical application items and must adhere to specific technical drawings and quality requirements, including the prohibition of intentionally added mercury or mercury-containing compounds. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Delivery is required within 42 days, with a need ship date of October 13, 2026, and a final required delivery date of December 26, 2026. Shipping is FOB Origin, with inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, specifically noting the items as delicate instruments. The designated delivery point is the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-6356
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M2-26-T-6351
Other Aluminum Rolling, Drawing, and Extruding

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334310
New
DIBBS
HEADSET-MICROPHONE
Solicitation # SPE7M2-26-Q-0764
Audio and Video Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6358
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE7M2-26-T-6360
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUST
Solicitation # SPE7M2-26-T-6355
This contract, identified as SPE7M2-26-T-6355, is for the procurement of protective dust and moisture seal caps, specifically part number UT014DCG from SOURIAU USA, INC. The agreement covers two separate line items under purchase requests 7017924192 and 7017942834, each requiring one unit of NSN 5340016676329. Delivery is required within 10 days, with required delivery dates set for August 14 and August 17, 2026. The terms specify FOB Origin shipping to the Distribution Management Office in Twentynine Palms, California. Strict adherence to DLA packaging requirements is mandatory, including MIL-STD-129 for marking and labeling and ASTM D3951 for non-hazardous commercial packaging. Inspection and acceptance will occur at the destination, and the contract incorporates various technical and quality requirements, including those regarding covered defense information and source approval documentation.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
Supply of Mil-Spec Terminal Lugs (NSN 5940001133138)This subcontract involves the procurement and delivery of 2,300 units of military-specification Terminal Lugs, identified by NSN 5940001133138, for the Department of Defense Nuclear Reactor Program. The contract falls under NAICS code 335999 and requires the supplied components to meet strict military standards for use within nuclear reactor systems. The solicitation was posted on August 17, 2026, with a response deadline of August 28, 2026. Performance for this contract will take place in Cherry Point, zip code 28533-5040.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThis subcontract, titled Hazardous Materials Compliance and SDS Management, is issued by the Department of Defense under the Nuclear Reactor Program. The primary objective is to identify hazardous content within cable assemblies and develop compliant Safety Data Sheets to ensure full adherence to OSHA standards and DFARS 252.223-7001 regulations. The project is categorized under NAICS code 541690 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by August 28, 2026, following the posting date of August 17, 2026.
Other Scientific and Technical Consulting Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details