Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RETAINER, PACKING

Active
SPE7L1-26-U-0430Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicitation is for the procurement of 130 units of RETAINER, PACKING with NSN 5330-00-812-1214 under purchase request 1000236436, with a delivery requirement of 210 days after award. The procurement is governed by the DLA Master List of Technical and Quality Requirements, which includes referenced technical and quality specifications identified by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The item must comply with DLA packaging requirements and strictly prohibit the use of asbestos as defined in FED-STD-313. Additionally, any non-accepted supplies must have all government identification removed prior to return. The solicitation number is SPE7L1-26-U-0430, posted on July 24, 2026, with responses due by July 29, 2026, under NAICS code 339991. The contracting authority is the Department of Defense through the Land Supply Chain organization, with primary point of contact Paul Kelley reachable via email and phone provided. All requirements are enforced through the DIBBS platform where the full solicitation can be accessed.

General Info

Procure 130 retainers via DLA solicitation SPE7L1-26-U-0430, response due July 14, 2026, via DIBBS.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-U-0430 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
PAUL KELLEY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RETAINER,PACKING
RETAINER PACKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
ADEQUATE DATA FOR NSN/Part Number: 5330-00-812-1214 Quantity: 130 EA Purchase Request: 1000236436QTY: 130 Delivery: 210 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
Manufacture of Specialized Military SEAL Component
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEALThis contract is a small business set-aside solicitation under the NAICS code 339991, issued by the Strategic Acq Program Directorate of the Department of Defense, with a solicitation number SPE7LX-26-U-8753 and a response deadline of July 29, 2026. It is structured as an indefinite delivery contract with an estimated quantity of 27 units of a SEAL item, a guaranteed minimum of 4 units, and a maximum contract value of $350,000.00. Delivery is required within 98 days after order placement under FOB Origin terms, with inspection and acceptance occurring at the destination. The contract imposes strict compliance with DLA packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129 for labeling and barcoding, and RP001 for procurement packaging, requiring shock-proof containment with a secondary barrier for any mercury-containing components, excluding only specific functional uses in batteries, lighting, instruments, weapon systems, or NAVSEA-specified reagents. No asbestos as defined by FED-STD-313 is permitted, and materials must be preserved using Method 33 (CLNG/DRY:1). The contract mandates adherence to cybersecurity requirements per DFARS 252.204-7012, prohibits acquisition of covered telecommunications equipment under DFARS 252.204-7018, and enforces hazard communication standards including OSHA 29 CFR 1910.1200 and DFARS 252.223-7001. Contractors must maintain active SAM.gov registration, provide a Unique Entity Identifier and CAGE code for compliance purposes, and submit all invoices and receiving reports electronically through Wide Area WorkFlow. Proposals must be submitted via DIBBS, and offerors must affirm their small business status and any applicable socioeconomic certifications under FAR 52.219-28. Numerous contract clauses require compliance with whistleblower protections, disclosure obligations, cybersecurity incident reporting, and restrictions on internal confidentiality agreements, with deviations applied to several clauses in accordance with specific authorization numbers. Payment and administrative data, as well as COR/COTR contacts, will be defined in the award document.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract is a solicitation for a gasket with NSN 5330-00-753-0743 under solicitation number SPE7L4-26-U-0947, structured as an indefinite-delivery contract with a guaranteed minimum order of 60 units and a maximum estimated value of $350,000, for a total estimated quantity of 404 units. The procurement is a total small business set-aside under FAR 19.5, with a NAICS code of 339991, and requires full compliance with DLA packaging standards including MIL-STD-2073-1E for packaging and preservation, MIL-DTL-117 Type II, Class C for UV-resistant opaque packaging, and MIL-STD-129 for shipping and storage marking. Items must be identified in accordance with MIL-STD-130N and must not contain asbestos as defined by FED-STD-313. Hazardous materials, if present, must be labeled per 29 CFR 1910.1200 with submitted hazard warning labels and material safety data sheets. Delivery is FOB Origin with an 88-day ADO window from issuance of a delivery order. Cybersecurity requirements under NIST SP 800-171 are mandated with deviations applied to specific clauses, including mandatory cyber incident reporting within 72 hours. Contractors must comply with federal regulations related to subcontracting, trafficking in persons, employment verification, sustainable products, and protected information safeguarding. Invoicing is exclusively through the Wide Area WorkFlow system. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RA001. Offerors must provide accurate size status and socioeconomic certifications, and are subject to strict compliance with DFARS clauses addressing conflict of interest, whistleblower rights, telecommunications equipment prohibitions, and controlled unclassified information protection. No unit prices are provided, and pricing is contingent upon delivery order issuance. The contract requires adherence to DLA’s packaging and marking directives referenced in RP001, and all documentation must be submitted electronically via DIBBS and SAM.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPLACEThe contract solicitation SPE7L3-26-T-116H seeks a parts kit for mechanical equipment seal replacement, specifically 10 units of NSN 5330-01-723-4286, with delivery required 151 days after order date to the DDSP New Cumberland Facility in Pennsylvania. The item is classified as a commercial item and must be free of asbestos, mercury, class I ozone-depleting chemicals, and hexavalent chromium, aligning with strict material prohibitions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag, and adhere to MIL-STD-2073-1E for preservation, wrapping, and containerization, including specific preservation methods and cushioning materials. Items must be marked per MIL-STD-129 and MIL-STD-130N for identification and barcoding, with all labeling meeting DLA packaging guidelines. The contract mandates electronic invoicing through WAWF, with payment submission following DoD protocols, and delivery must be FOB origin, with the contractor responsible for transportation to the contiguous U.S. destination. Inspection and acceptance occur at the delivery point, governed by FAR 52.246-2, with compliance verified against technical quality requirements referenced by R and I numbers from the DLA Master List. Cybersecurity requirements under DFARS 252.204-7012 obligate protection of covered defense information, while 252.225-7007 and 252.204-7018 prohibit procurement from Communist Chinese military companies and restricted telecommunications suppliers. Contract administration is conducted under deviation clauses from the FAR, including modified provisions for contract type, simplified acquisitions, and subcontracting, with all submissions required through DIBBS only, and no alternative submission methods permitted. The contract includes clauses mandating reporting of cyber incidents, whistleblower protections, prohibition of internal confidentiality agreements, accelerated payments to small business subcontractors, and electronic payment submission. All packaging, marking, and shipment documentation must reflect compliance with the latest applicable revisions of referenced standards effective during contract execution, and the contractor must maintain accurate registration in SAM with a valid UEI and CAGE code.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASEDThe contract pertains to the procurement of SEAL, PLAIN ENCASED with NSN 5330-01-549-9595, under solicitation number SPE7LX-26-U-8779, issued by the Department of Defense’s Strategic Acquisition Program Directorate. A total quantity of 1,777 units is requested at a unit price of $1,777.00, with no variance allowed in quantity delivery. Delivery is to be made FOB origin within 98 days, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrap materials, and container codes, and marking must adhere to MIL-STD-129 with no special marking required. The item is subject to DLA’s packaging requirements and hazardous materials shipping protocols. This is a total small business set-aside under NAICS code 339991, with responses due by July 24, 2026, and the solicitation was posted on July 9, 2026. Technical and quality requirements referenced are governed by the DLA Master List, with revisions controlled by the solicitation issue date. The point of contact for inquiries is Theodore Misiolek.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
O-RING
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPThis contract pertains to the procurement of a nonmetallic, special-shaped seal (NSN 5330010513708) under a Unilateral Simplified Indefinite-Delivery Contract (IDC) issued by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT office. The item is a restricted source product requiring formal engineering source approval by the Government Design Control Activity, and delivery is governed by a 97-day ADO timeline with FOB destination terms. The contract includes a maximum value of $350,000 and an estimated annual quantity of 12 units, though no firm unit price is established and the base quantity is non-binding until a delivery order is placed. The seal must adhere to stringent material restrictions, including a complete prohibition on Class I ozone-depleting chemicals and intentional use of mercury or mercury compounds, except for specific functional applications like batteries, sensors, or instruments as permitted under NAVSEA 5100-003D, which also mandates shockproof design and a secondary containment barrier for any mercury-containing components. Packaging and marking are strictly controlled: all items must be enclosed in a medium-duty, waterproof, greaseproof, opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, due to UV sensitivity of the federal supply class, and must be labeled according to MIL-STD-129 with Special Marking Code 32 indicating a TYPE I (CODE Z) shelf-life item. The seal has a non-extendable 20-year (240-month) shelf life under RS045/RS001 requirements and must be preserved using clean and dry methods per MIL-STD-2073-1E, with identification marking conforming to MIL-STD-130N. The contractor must comply with hazardous materials labeling per DFARS 252.223-7001, use Wide Area WorkFlow for invoice submission, and ensure all packaging and shipping align with DLA’s RP001 and other referenced standards. All offerors must submit via the DLA Internet Bid Board System (DIBBS) by the stated deadline and provide a Unique Entity ID and accurate socioeconomic representations, including small business certifications if applicable, while adhering to cybersecurity and data protection requirements outlined in multiple FAR and DFARS clauses including 252.204-7012, NIST
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL, ANTIPILFERAGE
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
O-RINGThe contract specifies the procurement of 130 O-Rings under NSN 5331-01-534-9099, with delivery required within 161 days of award, FOB origin, and a strict zero tolerance for quantity variance. All items must be packaged and marked in full compliance with MIL-STD-2073-1E and MIL-STD-129, housed in a medium-duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117 Type II Class C Style 1 requirements due to the sensitivity of the Federal Supply Classification 5330/5331 NSNs to UV degradation. The packaging is manually excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents explicitly authorized by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Hazardous material shipping follows IP025 guidelines, with detailed parcel post and freight addresses designated for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces DLA Packaging Requirements (RP001) and references the DLA Master List of Technical and Quality Requirements for all incorporated R and I numbers, with compliance controlled by the version active on the solicitation issuance date. All units of issue align with DoD standards, and acceptance is scheduled at the destination point.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
Federal
Tornado Door and APR parts, National Bio and Agro-Defense Facility, Manhattan, KansasThis solicitation, numbered 1232SA26Q1046, is a combined synopsis and request for quotation for Tornado Door and APR parts to be delivered to the National Bio and Agro-Defense Facility in Manhattan, Kansas. The acquisition is structured under FAR Part 12 as a commercial item procurement, with no separate written solicitation being issued; responses must be submitted directly via the provided UI link by the deadline of July 27, 2026 at 6:00 p.m. Eastern Time. The requirement is exclusively set aside for small business concerns under the NAICS code 339991, with a small business size standard of 600 employees, and is designated as a Total Small Business Set-Aside, meaning only eligible small businesses may submit quotations. The procurement is managed by the USDA ARS AFM APD office located in Beltsville, Maryland, with Erin Riffey listed as the primary point of contact for inquiries via phone or email. All responsible small business sources are encouraged to respond, and quotations will be evaluated without further competition beyond the initial submission window.
USDA Ars Afm Apd

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
Federal
49--FILLER AND BLEEDER,The contract solicitation NSN 1R-4920-012695376-SX seeks three units of a filler and bleeder component under solicitation number N0038326QPC09, with delivery terms set at FOB origin. The requirement is managed by the Navy Supply Systems Command Weapon Systems Support, based in Philadelphia, Pennsylvania, and is posted as a presolicitation with responses due by September 8, 2026. Offerors must ensure that the product, manufacturer, or themselves meet all qualification requirements at the time of award, as governed by FAR clause 52.209-1, and must verify compliance through approved military and federal specifications available via ASSIST-Online or the DoD Single Stock Point. The Government is not applying commercial item acquisition policies under FAR Part 12, but interested parties may still propose commercial alternatives within 15 days of this notice if capable of meeting technical requirements. All documentation referencing patterns, drawings, or deviations is not available at DODSSP and must be obtained through alternate channels. For inquiries, potential bidders may contact the primary point of contact, Shamus F. Roache, via email or phone as listed.
Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 561910
New
DIBBS
Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging and preservation services for hydraulic pumps in accordance with DLA RP001 standards, ensuring all units are properly protected against moisture, correctly marked, and fully shipment-ready for military logistics. The work must meet stringent defense requirements for durability, environmental resistance, and traceability throughout the supply chain, with a focus on maintaining operational readiness during storage and transport. All packaging processes must align with federal guidelines for defense-related components, including the use of approved materials and techniques to safeguard against corrosion, contamination, and physical damage. This is a total small business set-aside under the SBA program, with the NAICS code 561910 indicating it falls under Other Support Activities for Transportation, and is issued by the Department of Defense under the Land Supply Chain organization. Performance is designated to take place in Texarkana, Texas, with a zip code of 75507-5000. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026. The contract is structured as a subcontract, meaning the prime contractor may delegate this task to a qualified smaller vendor meeting all technical and compliance standards. All participants must be certified small businesses capable of executing defense-grade packaging operations under strict deadlines and quality controls.
Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection Services (Origin)The contract requires performance of origin-based quality inspections to ensure compliance with specific Department of Defense standards for hydraulic pump production, including DLA quality standards RQ001, configuration management requirements RQ002, and acceptance criteria RQ009. Work is to be conducted at the designated place of performance in Texarkana, Texas, with the contractor responsible for verifying that all components and manufacturing processes meet stringent federal specifications from the point of origin through final production. This subcontract is a Total Small Business Set-Aside under SBA regulations, meaning only small businesses are eligible to respond, and it falls under NAICS code 541330 for engineering services. The solicitation was posted on July 24, 2026, with a response deadline of August 3, 2026, and is managed by the Land Supply Chain organization under the Department of Defense. Although no point of contact or detailed agency office address is provided, the contract emphasizes performance at the Texarkana location with a ZIP code of 75507-5000. Interested parties must submit proposals through the DIBBS platform at the provided UI link, and success will hinge on demonstrating capability to execute precise, origin-focused quality assurance processes aligned with military-grade reliability and documentation requirements.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Technical Data and Export Control Compliance SupportThis contract seeks a small business subcontractor to provide comprehensive compliance support for the handling of export-controlled technical data under U.S. defense procurement requirements. The work involves coordinating and facilitating critical export control training programs through the Defense Logistics Agency, managing the U.S. and Canada Joint Certification process, and maintaining rigorous documentation to ensure adherence to the International Traffic in Arms Regulations and the Export Administration Regulations. All activities must align with strict federal compliance standards to safeguard sensitive technical information and support lawful cross-border transmission of controlled data. The task is designated as a Total Small Business Set-Aside under the SBA program, with NAICS code 541611 indicating management consulting services, and is solicited by the Department of Defense’s Land Supply Chain office. The place of performance is designated as Texarkana, Texas, with a submission deadline of August 3, 2026. While no specific point of contact is listed, proposals must be submitted through the DIBBS portal, and the successful vendor will be expected to deliver seamless, accurate, and auditable compliance support without disruption to ongoing defense logistics operations.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333999
New
DIBBS
Hydraulic Pump Manufacturing and SupplyThe contract seeks the manufacture and supply of 527 units of Hydraulic Ramp Pump identified by NSN 2990-01-241-9143, fully compliant with Department of Defense military specifications. The work requires strict adherence to configuration management protocols, appropriate packaging standards, rigorous quality assurance measures, and origin inspections to ensure traceability and compliance with federal procurement requirements. All units must be produced and delivered to meet the exacting reliability and performance benchmarks expected for military equipment. This is a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses classified under NAICS code 333999. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and the performance location is specified as Texarkana, Texas, with a ZIP code of 75507-5000. The contract falls under the Land Supply Chain organization within the Department of Defense and is issued as a subcontract. Participation is restricted to entities meeting small business size standards, and compliance with all regulatory and technical requirements is mandatory for award consideration.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Documentation ServicesThe contract requires the preparation and submission of Material Safety Data Sheets and hazard labels for any hazardous materials linked to the steering knuckle or its packaging, with strict adherence to OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and DLA TQ IP025 regulations. All documentation must accurately reflect chemical hazards, handling procedures, and labeling requirements to ensure full compliance with federal safety and communication mandates. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid. The NAICS code 541620 indicates this is a scientific and technical consulting services contract, focused on regulatory compliance and safety documentation. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, and performance is tied to Department of Defense logistics operations under the Land Supply Chain office.
Environmental Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging, Labeling, and Palletization ServicesThe contract requires comprehensive packaging, labeling, barcoding, and palletization services for military shipments of steering knuckles, fully compliant with MIL-STD-129 for documentation and identification standards and RP001 for secure, standardized palletization. All packaging must meet stringent military logistics requirements, including proper handling of hazardous materials if applicable, ensuring safe, traceable, and efficient transport through the defense supply chain. The services must be executed with precision to support readiness and sustainment operations without delay. This is a subcontract awarded under a Total Small Business Set-Aside as defined by the SBA, with the NAICS code 493190 indicating warehousing and storage support services. The solicitation was posted by the Department of Defense’s Land Supply Chain and is open for responses until July 29, 2026, with performance expected to occur at an unspecified location within the United States. All bidders must be certified small businesses, and compliance with federal acquisition regulations governing set-asides is mandatory to qualify for award.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
Manufacturing of Steering Knuckle (NSN: 2530-01-577-7441)The contract requires the precision manufacturing and delivery of six military-grade steering knuckles identified by NSN 2530-01-577-7441, with strict adherence to Department of Defense technical standards including MIL-STD-129 for labeling and packaging and DFARS compliance for sourcing and materials. All units must meet the rigorous quality and performance benchmarks expected for defense applications, ensuring full compatibility with military systems and logistics protocols. The work is subject to full inspection and verification upon delivery to confirm compliance with all specified technical and regulatory requirements. This is a small business set-aside subcontract under the SBA program, specifically reserved entirely for small businesses as defined by FAR 19.5, with the NAICS code 332999 covering other fabricated metal product manufacturing. The solicitation was posted on July 24, 2026, with a firm response deadline of July 29, 2026, and performance will be managed by the Land Supply Chain organization within the Department of Defense. While physical delivery location and point of contact details are not specified, the contract is accessible through the DIBBS platform, and all awarded work must be executed by a qualified small business entity capable of fulfilling the demanding technical and compliance obligations of a military supply contract.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334418
New
DIBBS
Supply of Electronic Component (CAGE/PN: 0BSY9 / 304322002)Six units of a defense electronic component with CAGE code 0BSY9 and part number 304322002 are being procured under a subcontract issued by the Department of Defense through LAND SUPPLY CHAIN. The component must meet strict DFARS and Buy American requirements, ensuring full domestic sourcing and compliance with federal defense procurement standards. Full traceability of materials and manufacturing processes is mandatory from origin to final delivery. All units must be shipped using the fastest available traceable method to Tinker Air Force Base, with no exceptions permitted for shipping protocols or delivery timelines. The solicitation was posted on July 24, 2026, and responses are due by August 7, 2026, with the North American Industry Classification System code 334418 indicating the procurement falls under Other Electronic Component Manufacturing.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541380
New
DIBBS
Product Verification Testing (PVT) Coordination and SupportThe contract encompasses coordination and support for the Department of Defense’s Product Verification Testing (PVT) under clause E05, focusing on ensuring thorough documentation, comprehensive readiness assessments, and effective government liaison activities. The work directly supports defense product testing protocols and requires close alignment with DoD standards to verify operational compliance and performance integrity. Responsibilities will include managing administrative and technical documentation, facilitating pre-test evaluations, and serving as the primary point of contact between contractor teams and government personnel to streamline testing processes and resolve any readiness issues. Performance is designated for N Stonington, CT, with a ZIP code of 06359, and the work falls under NAICS code 541380, categorizing it as other scientific and technical consulting services. This is a subcontract opportunity issued by the Land Supply Chain organization within the Department of Defense, with a response deadline of August 8, 2026. No set-aside type is specified, and while no point of contact is provided, the solicitation can be accessed through the DIBBS portal for further submission details and requirements.
Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Export Control and ITAR/EAR Compliance Training & Data HandlingThe contract requires the provision of comprehensive ITAR and EAR compliance training, access control configuration, and recordkeeping support to ensure the secure handling of export-controlled technical data. This subcontract is focused on establishing and maintaining robust compliance frameworks aligned with U.S. export control regulations, ensuring that personnel are properly trained and that access to controlled information is strictly governed and auditable. The services must be performed at the designated location in N Stonington, Connecticut, with all activities centered around safeguarding sensitive technical data from unauthorized disclosure or transfer. The solicitation was posted on July 24, 2026, and responses are due by August 8, 2026, with a NAICS code of 541611 indicating management consulting services. The contracting activity falls under the Department of Defense through the Land Supply Chain organization, and while no set-aside type is specified, the work is intended to support defense-related export control obligations. The contractor must deliver tailored training programs, implement secure access protocols, and maintain detailed documentation records to meet regulatory requirements and ensure continuous compliance throughout the project lifecycle.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Cybersecurity Compliance and CMMC Level 2 Certification SupportThe contract seeks consulting and assessment services to support full compliance with the Cybersecurity Maturity Model Certification Level 2 requirements under RD005, focusing on the development of a System Security Plan, creation and implementation of necessary security policies, and preparation for an official CMMC audit. The work involves guiding the contractor through all technical and procedural steps required to meet DoD cybersecurity standards, ensuring documented controls are properly established, tested, and maintained in alignment with NIST SP 800-171 and CMMC Framework guidelines. Success will be measured by achieving official CMMC Level 2 certification readiness, with all deliverables tailored to fulfill federal contract obligations. The contract is a subcontract issued by the Department of Defense under the LAND SUPPLY CHAIN organization, with performance to occur in N Stonington, Connecticut, 06359. It was posted on July 24, 2026, and responses are due by August 8, 2026. The NAICS code 541611 indicates this is for management, scientific, and technical consulting services. No set-aside designation is specified, and the solicitation is managed through the DIBBS platform with the reference number SPE7L126Q1366. All activities must align with federal cybersecurity procurement requirements and be executed by a qualified third-party provider with demonstrated experience in CMMC implementation and audit support.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 811411
New
DIBBS
Marking and Labeling of ShipmentThe contract requires the application of MIL-STD-129 compliant markings and labels to the CROSS SLIDE component and its associated shipping container, ensuring all required identification data including the National Stock Number, Commercial and Government Entity code, and handling codes are accurately and permanently affixed. This work must adhere strictly to military standards for traceability, durability, and uniformity in logistics and distribution environments. The performance location is specified as N STONINGTON, ZIP 06359, and the contract is classified as a subcontract under the NAICS code 811411, managed by the Department of Defense through the LAND SUPPLY CHAIN office. The solicitation was posted on July 24, 2026, with responses due by August 8, 2026, and participation is open without any stated set-aside designation.
Home and Garden Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details