Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RETAINER, SEAL

Active
SPE7L3-26-T-118EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two stainless steel 304 retainers, each measuring 0.050 inches thick, 0.312 inches wide, and 27.688 inches long, with eleven 0.156-inch diameter holes, fabricated per specified drawing requirements. The items must be identified in accordance with MIL-STD-130N and are classified as critical application items requiring source inspection. Sampling for quality conformance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, and zero non-conformances required unless otherwise stated. The manufacturing standard must be the current revision of the applicable part specification, and previously manufactured units meeting prior revisions are acceptable if they were compliant at the time of production. The items are excluded from the First Destination Packaging Program and are not eligible for standard commercial packaging. Packaging must comply with MIL-STD-2073-1E, with each unit sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Marking must adhere to MIL-STD-129 with no special marking required. Palletization must meet DLA packaging requirements, and delivery is FOB origin with a 98-day lead time, scheduled for November 3, 2026, with a final delivery deadline of November 22, 2026. Inspection and acceptance occur at the destination, and the NSN is 5330-01-184-1741 with a unit price of $2.00 per piece and a total value of $4.00 for the two units. The contract references DLA’s master list of technical and quality requirements, incorporates federal supply classifications, and directs all correspondence and shipments to the DLA distribution facility in New Cumberland, Pennsylvania.

General Info

Two stainless steel 304 retainers, 0.050" thick, 27.688" long, 11 holes, MIL-STD compliant, FOB origin, $2.00 each, delivery Nov 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-118E.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
NATHANIEL WEAVER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RETAINER,SEAL
RETAINER,SEAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
STAINLESS STEEL 304
0.050 IN THK 0.312 IN W 27.688 IN LG
11 HOLES 0.156 IN DIA, FABRICATED PER DWG
IDENTIFY TO
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
This item has been approved by the Packaging Supervisor/ Packaging Lead to manually exclude from the First Destination Packaging (FDP) Program.
These items are not candidates for Standard Commercial Packaging.
SPE7L3-26-T-118E
SECTION B
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC CID A-A-52218C REVISION NR C DTD 04/27/2016 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81337 5-13-2545 REVISION NR G DTD 07/23/1998 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016689612 0001 EA 2.000
NSN/MATERIAL:5330011841741
DELIVERY (IN DAYS):0098
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7L3-26-T-118E
SECTION B
PR: 7016689612 PRLI: 0001 CONT’D
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/03/2026 Original Required Delivery Date:11/22/2026
SPE7L3-26-T-118E NSN/Part Number: 5330-01-184-1741 Quantity: 2 EA Purchase Request: 7016689612QTY: 2 Delivery: 98 days ADO

Similar Contracts

NAICS: 339991
New
DIBBS
GASKETThis contract is for the procurement of 89 units of a gasket with NSN/Part Number 5330-00-739-9315 under solicitation SPE7L3-26-T-118M, with a required delivery within 509 days after order. The purchase request number is 7017441052 and the quantity requested is 219. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a subsequent amendment supersedes it. All items must comply with DLA packaging standards, and government identification must be removed from non-accepted supplies. The manufacture and delivery of the gasket strictly prohibit the use of Class I ozone-depleting chemicals, overriding any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Technical data associated with this item is subject to export control under ITAR or EAR, and unauthorized disclosure to foreign persons—even within the United States—is prohibited. Only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization may access the controlled data as defined by DFARS 252.225-7048. The contract is issued by the Department of Defense through the Land Supplier Operations Vehicle Support office, with performance required in New Cumberland, Pennsylvania, and inquiries should be directed to Susan Diamond at the provided contact information.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKINGThe contract pertains to the procurement of four units of a retainer, packing identified by NSN 5330-01-718-2760, with a delivery deadline of 70 days after award. All supplied items must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contractor is prohibited from using class I ozone-depleting chemicals in any component or process, a restriction that overrides any conflicting specification but does not reduce product performance requirements; alternative chemicals require prior approval unless explicitly authorized. Asbestos is strictly forbidden in any form, and previously listed asbestos-containing codes or part numbers are no longer acceptable, with any substitution subject to approval under Clause L30 and Provision 4 conditions. Packaging and handling must adhere to DLA’s official procurement packaging requirements, and any government identification on non-accepted supplies must be removed. The solicitation, numbered SPE7L3-26-T-118F, was posted on July 15, 2026, with responses due by July 27, 2026, under NAICS code 339991, and performance is to occur in New Cumberland, Pennsylvania, with Nathaniel Weaver of the Department of Defense’s Land Supplier Operations Vehicle Support as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThe contract pertains to the supply of a SEAL, PLAIN item with NSN 5330-01-657-3037 and part number 8437967-1, manufactured by BAE SYSTEMS INFORMATION & ELECTRONIC, under solicitation SPE7L4-26-T-5645. Seven units are required at $7.00 each, totaling $49.00, with delivery mandated within 20 days FOB origin to Marine Aviation Logistics Squadron 39 at Camp Pendleton, California. The item is classified as a critical application item with a 12-month extendable shelf life under TYPE 2 (CODE 4) requirements, and must be packaged in accordance with MIL-STD-2073-1E, MIL-DTL-117 TYPE II CLASS C STYLE 1, and MIL-STD-129 for marking, including special code 32 for shelf life. Packaging must be medium-duty, waterproof, greaseproof, and opaque to protect against UV degradation. The item ships in rolls of 40 from the OEM and will be repackage by DLA depot into individual units. Sampling follows MIL-STD-1916 or ASQ H1331, TABLE 1, with zero non-conformances required unless otherwise specified in the contract. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment is required, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. Configuration change management and source approval documentation must adhere to RC001 and RQ002, and any deviations require formal requests. Hazardous materials packaging and shipment follow IP025 guidelines. Shipment must be traceable via freight, not parcel post, and transported according to DLAD PROC NOTES C19 and C20. The contract mandates adherence to DLA packaging standards and federal supply classification guidelines. The response deadline is July 27, 2026, with an original required delivery date of July 13, 2026, and no quantity variance is permitted. All labeling, marking, and shipping instructions must align with the provided specifications, and the point of contact for inquiries is Anna-Rachelle Betts, reachable via DLA email and phone.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
POPPET, FILLERThis contract, solicitation SPE4A6-26-R-XB43, is a Total Small Business Set-Aside under NAICS code 339991 issued by the Department of Defense’s ASC Commodities Division for the procurement of a Poppet, Filler, identified by NSN 3655-01-009-2762. The contract is structured as a potential multiple Simplified Indefinite-Delivery Contract with a guaranteed minimum order of 30 units in the first base year and a maximum of 119 units per delivery order, with total estimated contract value capped at $350,000. Performance is required within 101 days after award, with deliveries to various CONUS stock locations, and the overall period of performance, including all options, may not exceed five years. The contract mandates compliance with stringent packaging and marking standards including MIL-STD-129, MIL-STD-2073-1E, RP001, SAE ARP1176 using HCFC-225G, and IP025, with specific labeling requirements for radioactive materials and Product Verification Test Samples. The item is classified as a Commercial Off-The-Shelf (COTS) product subject to zero-defect sampling per MIL-STD-1916, ASQ H1331, or equivalent zero-based plans, with critical, major, and minor attributes requiring AQLs of 0.1, 1.0, and 4.0 respectively. Invoice submission must be completed electronically via WAWF using specific document combinations depending on deliverable type, and payment routing requires accurate DoDAAC information from contract blocks. The contractor is bound by FAR and DFARS clauses including termination for convenience and default, authorized deviations, computer-generated forms, and the Supplier Performance Risk System notification, along with DFARS clauses governing subcontracting practices for commercial products and cybersecurity compliance under CMMC, requiring a valid certification not older than 180 days and annual affirmations of compliance. The contractor must also adhere to DPAS prioritization requirements, handle hazardous materials under specific federal acts, and comply with cybersecurity protocols for handling FCI or CUI. Any unauthorized use of foreign-flag vessels permits equitable adjustment, and failure to notify the Contracting Officer of sea transportation after initially representing non-use requires full compliance with applicable clauses. The offeror must submit proposals electronically via email or DIBBS, with
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to a gasket item identified by NSN 5330-01-504-2639 and part number NV16000A1, with a single unit quantity requiring delivery within 20 days FOB destination. The item must be packaged in a medium duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, due to its vulnerability to ultraviolet degradation, and this packaging requirement applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, including special marking code 20-20 indicating “Do not bend,” and palletization must adhere to DLA’s procurement packaging requirements. The item is excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging. Delivery is to a vessel shipment address at FPO AP 96666, with transportation instructions specifying the use of traceable methods only—parcel post is prohibited. The item is non-hazardous and does not require special handling beyond packaging and marking, with inspection and acceptance occurring at the destination. The contract is tied to Solicitation SPE7L1-26-T-837K, issued by the Department of Defense’s Land Supply Chain, with a required delivery date of July 13, 2026, and the primary point of contact is Kristina Derry.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details