Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RETAINER SLEEVE, SEA

Active
SPE7L1-26-T-912TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a retainer sleeve, seal, identified by NSN 5330-01-684-1748 and part number 936332, with a quantity of two units to be delivered within ten days under solicitation SPE7L1-26-T-912T. The item is subject to strict technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with packaging required to meet MIL-DTL-117, Type II, Class C, Style 1 standards, ensuring the product is housed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation. All deliveries must comply with MIL-STD-129 marking, MIL-STD-2073-1E packaging, and DLA packaging guidelines, with special handling instructions including “Do Not Bend” and palletization per approved protocols. The item is classified as a restricted source requiring government engineering approval, and only approved sources listed on the source-controlled drawing may furnish the item unless otherwise authorized. The contract explicitly prohibits the use of Class I ozone-depleting chemicals and mandates that any substitute chemicals must receive prior approval. Cybersecurity compliance is required at CMMC Level 2, with a self-assessment mandatory for offerors. Delivery is FOB origin to a designated U.S. Army installation in Bulgaria, with shipment details tied to DLA procedural notes and a designated point of contact for logistics. The item is part of a federal acquisition under the Federal Supply Classifications 5330/5331, with strict zero variance allowed for quantity, inspection, and acceptance occurring at destination. The contract also enforces configuration change control via Engineering Change Proposals and Variance Requests, and all supplies must be marked in accordance with MIL-STD-130N for U.S. military property identification. Final delivery is scheduled for July 31, 2026, and the contract includes restricted data protections and cybersecurity safeguards applicable to defense information.

General Info

Two retainer sleeves, NSN 5330-01-684-1748, deliver to Bulgaria by July 31, 2026, compliance with MIL-STD, CMMC Level 2, restricted source.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-912T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RETAINER SLEEVE,SEA
RETAINER SLEEVE,SEAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS (NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED IN
QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
SPE7L1-26-T-912T
SECTION B
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
DRS SUSTAINMENT SYSTEMS, INC 98255 P/N 936332
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017727295 0001 EA 2.000
NSN/MATERIAL:5330016841748
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:JA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:20 -20 Do not bend
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
BULK BREAK POINT:
SPE7L1-26-T-912T
SECTION B
PR: 7017727295 PRLI: 0001 CONT’D
WK4GDV
W6N0 USA ASG BS SSA BG
US ARMY SSA BULGARIA ASG BS
NOVO SELO TRAINING AREA BLDG 7000
MOKREN 8994
BG
RDD 555 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WK4GDV
W6N0 USA ASG BS SSA BG
US ARMY SSA BULGARIA ASG BS
NOVO SELO TRAINING AREA BLDG 7000
MOKREN 8994
BG
MARKFOR
WK4GDV
W6N0 USA ASG BS SSA BG
US ARMY SSA BULGARIA ASG BS
NOVO SELO TRAINING AREA BLDG 7000
MOKREN 8994
BG
M/F: (TCN) WK4GDV62090193
RDD: 555
PROJ: 9GU TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/31/2026
SPE7L1-26-T-912T NSN/Part Number: 5330-01-684-1748 Quantity: 2 EA Purchase Request: 7017727295QTY: 2 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913T
The contract specifies the procurement of a gasket with NSN 5330-00-391-8381 and part number N0900367 from LESLIE CONTROLS, INC., with a quantity of two units to be delivered within 20 days of contract award. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including use of a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Marking must follow MIL-STD-129 with no special labeling required. The gasket must not contain asbestos as defined by FED-STD-313, and mercury or mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA; any permitted mercury-containing devices must have shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging and palletization must adhere to DLA standards, and hazardous material shipping details require use of traceable freight services only—parcel post is prohibited—with the delivery address designated to the Naval Computer and Telecommunications Station Cutler in Maine. The contract is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is controlled by the solicitation issue date. The solicitation number is SPE7L1-26-T-913T, with a response deadline of August 17, 2026, and the original required delivery date is July 30, 2026.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SHIELDING GASKET, EL
Solicitation # SPE7M0-26-T-030K
The contract specifies the procurement of one shielding gasket, model 0212688-1 from Argon St, Inc., identified by NSN 5999015894105, under solicitation SPE7M0-26-T-030K. Delivery is required within five days of order placement, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking codes applied. Packaging must be palletized according to DLA standards and conform to hazardous material shipping protocols, explicitly excluding mercury or mercury-containing compounds unless exempted for specific functional uses such as batteries, instruments, or weapon systems, and portable fluorescent lamps must include a secondary containment. The shipment is destined for the U.S. Naval Base in Sasebo, Japan, with a parcel post address and detailed shipping instructions, and includes a required delivery date of August 4, 2026. The contract references the DLA Master List of Technical and Quality Requirements, incorporating all listed R and I numbered specifications, and mandates adherence to DoD unit of issue standards. The point of contact for the solicitation is Gerard Quinn of the Department of Defense, with procurement managed through the Maritime Supply Chain E-SoC Buy unit.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-912R
This contract pertains to the procurement of a gasket identified by NSN 5330-01-696-6243 and part number 11B4600146-3, with a single unit requirement to be delivered within ten days of contract award. The item must comply with strict packaging standards, including sealing in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, due to the susceptibility of related materials to UV degradation. All packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be shipped to a U.S. Army facility in Powidz, Poland. The contract prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification but maintaining all product performance requirements. Configuration changes or deviations require formal approval via an Engineering Change Proposal, and a Certificate of Conformance is authorized unless specifically withheld. The technical specification referenced is TDP Rev A Gen 1, dated September 15, 2021, with a revision effective July 1, 2024. All requirements are governed by the DLA Master List of Technical and Quality Requirements, and the solicitation falls under full and open competition with no set-aside. The designated point of contact is Kristina Derry at the Defense Logistics Agency, with the solicitation issued under SPE7L1-26-T-912R, and the original required delivery date set for July 31, 2026.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE4A5-26-Q-0663
The contract is for 24 units of a plain seal, designated by NSN 5330-01-358-9537 and part number 70207-83003-217, supplied by SIKORSKY AIRCRAFT CORPORATION, with a firm fixed price and zero variance in quantity. Delivery is required within 160 days after award, with both inspection and acceptance occurring at origin. The item has a non-extendable shelf life of 180 months and is classified as a TYPE I (CODE Y) item, requiring packaging per MIL-STD-2073-1E and MIL-DTL-117, TYPE II, CLASS C, STYLE 1, using a medium-duty, waterproof, greaseproof, opaque bag. Packaging and marking must conform to DLA packaging requirements and MIL-STD-129, including special marking code 32 for shelf-life identification. Sampling for quality assurance must follow Sikorsky’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Item unique identification is not required per the service customer’s request. The final destination is ARA HA FLOTILLA AERONAVES B N ROTA CADIZ, 11520 ROTA, ES, and the contract applies to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced are governed by the DLA Master List, with revisions controlled by the solicitation issue date. The contract is issued under solicitation SPE4A5-26-Q-0663, with a response deadline of August 12, 2026, and a projected ship date of July 13, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE4A5-26-T-322M
The contract specifies the procurement of a Seal, Plain Encased, identified by NSN 5330-01-098-0637 and part number 70968-06203-101, with a quantity of 235 units to be delivered within 122 days under solicitation SPE4A5-26-T-322M. The item is classified as a commercial item with strict packaging requirements: it must be sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Marking must comply with MIL-STD-129, and palletization must meet DLA packaging standards. The item is designated as a critical application component for Sikorsky Aircraft Corporation, and the delivery point is Cherry Point, North Carolina, with FOB origin and inspection and acceptance occurring at destination. No variance is permitted in quantity. The contract prohibits intentional use or direct contact with mercury or mercury-containing compounds except under specific exceptions for functional applications like batteries, fluorescent lamps, sensors, weapon systems, and NAVSEA-specified reagents, with portable devices requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions determined by acquisition type and amendment dates. Cybersecurity Maturity Model Certification Level 2 self-assessment is required. Unit of issue is each, priced at $235, totaling $55,225. Compliance with DFARS 252.211-7003(c)(1)(i) confirms that Item Unique Identification is not required per the servicing customer’s request. The item is subject to coverage of defense information, and transportation protocols must follow DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-912Y
The contract pertains to the supply of a gasket identified by NSN 5330-01-714-1706, with a quantity of one unit, under solicitation number SPE7L1-26-T-912Y. Delivery is required within five days after date of award, and the solicitation was posted on August 4, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 339991 and is organized by the Department of Defense’s Land Supply Chain. The place of performance is Westhampton Beach, New York, with Kristina Derry serving as the primary point of contact. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. The gasket must be free of asbestos and must not contain any class I ozone-depleting chemicals; any substitutes must be pre-approved unless explicitly authorized by the specification. Government identification must be removed from non-accepted supplies, and all packaging must comply with DLA’s procurement packaging standards.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-910Z
The contract pertains to the procurement of a gasket with NSN 5330-01-045-5318, quantity one, under solicitation SPE7L1-26-T-910Z, with a response deadline of August 17, 2026, and a required delivery within 20 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a subsequent amendment supersedes it. The item must be free of asbestos as defined in FED-STD-313, and no government identification may be removed from non-accepted supplies. The place of performance is listed as FPO with ZIP 09576, and the contracting activity falls under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact via email and phone. The NAICS code is 339991, indicating the supplier must be engaged in other miscellaneous manufacturing and must respond via the designated DIBBS portal.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M0-26-T-029W
The contract pertains to the procurement of four gaskets identified by NSN 5330-01-686-0198 under solicitation SPE7M0-26-T-029W, with a response deadline of August 17, 2026, and a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Compliance with DLA packaging standards is mandatory, and the use of Class I ozone-depleting chemicals is strictly prohibited, even if specifications otherwise permit; any substitute materials must be pre-approved unless explicitly authorized. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, and access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and obtained DLA approval. Additionally, government identification must be removed from non-accepted supplies, and the contractor must hold CMMC Level 2 certification from a certified third-party assessment organization. The place of performance is specified as Bremerton, Washington, with Rocio Mino of the Department of Defense serving as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL
Solicitation # SPE7L3-26-T-146R
The contract solicitation seeks 36 seals with NSN 5330011708632, to be delivered to DLA Distribution at W1A8 within 323 days of award, with only two approved sources authorized for quotation: 72957 and 7Y320, both associated with part number 44B3521-94D. This is a combined RFQ with no hard copies available; all submissions must be made electronically through the designated link, and no specifications, plans, or drawings are provided. Any responsible supplier may submit a quote as long as it is received on time, and there is no set-aside classification. The solicitation number is SPE7L326T146R, posted on August 4, 2026, with a response deadline of August 17, 2026. The procurement falls under NAICS code 339991 and is managed by the DLA Land and Maritime office located in Columbus, Ohio, with primary inquiries directed to DibbsBSM@dla.mil through the official solicitation portal.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913S
The contract specifies the procurement of a gasket with part number 77000-0004 and NSN 5330-01-126-0915, requiring a quantity of ten units to be delivered within twenty days of award. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference through R and I numbers. Strict prohibitions are in place regarding the use of asbestos as defined by Fed-Std-313 and the intentional addition of mercury or mercury-containing compounds in any hardware or supply, with exceptions limited to functional uses in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, and chemically specified reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary for mercury, in accordance with NAVSEA 5100-003D. The contract is issued under solicitation number SPE7L1-26-T-913S by the Department of Defense’s Land Supply Chain, with a response deadline of August 17, 2026, and the place of performance is designated as Fort Bragg, NC, 28310. All non-accepted supplies must be stripped of government identification prior to return, and the primary point of contact for inquiries is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7M4-26-T-299M
The contract pertains to the procurement of one retainer, packing with NSN 5330-01-107-0675, under solicitation SPE7M4-26-T-299M, issued by the Defense Logistics Agency’s Fluid Handling Division. The item is subject to strict export control regulations under either ITAR or EAR, meaning any handling, disclosure, or transfer of associated technical data to foreign persons—whether inside or outside the United States—is prohibited without prior authorization from the Department of State or Commerce. Only contractors approved by DLA through the US/Canada Joint Certification Program, who have completed mandatory training on handling export-controlled technical data and submitted the required DLA questionnaire, may access this information. The contract requires compliance with DFARS 252.225-7048, and the delivery must be completed within 20 days after order placement. The solicitation is open for competition with no set-aside preferences, and responses are due by August 17, 2026. The place of performance is Silverdale, WA 98315-7000, and primary point of contact is Blake Tushar, reachable via email and phone provided.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET AND SEAL SET
Solicitation # SPE7L1-26-T-911C
The contract pertains to the procurement of a GASKET AND SEAL SET with NSN 5330-01-406-8423, targeting a quantity of 1 KT under Purchase Request 7017726985. Delivery is required within five days of award, with the solicitation number SPE7L1-26-T-911C issued on August 4, 2026, and responses due by August 17, 2026. The item is classified under NAICS code 339991 and falls under the Department of Defense’s Land Supply Chain, with performance location in Jacksonville, Florida, 32226-3404. The contractor, Sauer-Sundstrand in Ames, Iowa, has been approved to manually exclude this item from the First Destination Packaging Program and is not eligible for standard commercial packaging due to specific handling requirements. Technical and quality specifications referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling for this simplified acquisition. Point of contact for inquiries is Kristina Derry, reachable via email and phone provided, and additional details are accessible through the DIBBS platform.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 336390
New
DIBBS
OIL FILTER CUTTER
Solicitation # SPE7L1-26-T-914K
The contract is for the procurement of one oil filter cutter with NSN 2940-01-536-9281 and part number 175-7546, supplied by approved vendors including Caterpillar Inc, Finning UK Ltd, and Hastings Deering (Aust) Pty Ltd. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit of issue as a single unit and no tolerance for quantity variance. The delivery is FOB origin with a 20-day lead time, and inspection and acceptance occur at the destination. The shipment must be dispatched using the fastest traceable means, excluding parcel post, with delivery addressed to W8T2 TX ARNG FMS 20 at 301 East Regis Street Suite 1122, Lubbock TX 79403-1122. The RDD is 777, and the shipment must be marked accordingly. The contract reference is SPE7L1-26-T-914K, with a required delivery date of July 30, 2026. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact. All items must be properly labeled and palletized per DLA specifications, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals or variance requests.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DU
Solicitation # SPE7L1-26-T-914F
The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7L1-26-Q-1439
The procurement is for 69 units of a metal tube assembly identified by NSN 4710016759509, to be delivered to W1A8 DLA DISTRIBUTION within 246 days after award. This is a source-controlled item governed by a specific drawing, with only the approved source 21392 P5574-2 eligible to supply the component. The solicitation, numbered SPE7L1239, is issued as a combined RFQ with a Small Business Set Aside designation, meaning only small businesses can compete. It is classified under NAICS code 326122 and managed by the DLA Land and Maritime office in Columbus, Ohio. All quotes must strictly conform to the technical requirements of the referenced drawing, and digitized versions of drawings and military specifications are available electronically for retrieval. Quotes may be submitted online only; hard copies are not accepted and must be received by the deadline of August 13, 2026. Interested parties are directed to the SAM.gov link for the full solicitation and must direct inquiries via email to the designated buyer, as no phone or in-person contact options are provided.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-910W
The contract is for a protective dust and moisture seal plug identified by NSN 5340-01-357-7621, with a quantity of one unit, to be delivered within five days of award under purchase request 7017720090. The item is procured through a federal solicitation issued by the Department of Defense’s Land Supply Chain, with the solicitation number SPE7L1-26-T-910W, posted on August 4, 2026, and response deadline set for August 17, 2026. The place of performance is Fort Carson, Colorado, with the NAICS code 332510 indicating manufacturing within the engine and turbine manufacturing sector. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the effective revision tied to the solicitation issue date, award date, or any amendment date. The supplier, KHD Deutz of America Corp in Norcross, Georgia, must ensure compliance with DLA packaging standards and remove any government identification from non-accepted supplies. The primary point of contact for the solicitation is Michael Nordahl, reachable via email and phone provided in the contract data.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-912K
The contract pertains to the procurement of one retaining strap identified by NSN 5340-01-700-7621 under solicitation SPE7L1-26-T-912K, issued by the Department of Defense through the Land Supply Chain. Delivery is required within five days of award at FOB origin, with inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center Southeast in Jacksonville, Florida. Strict packaging requirements mandated by MIL-STD-2073-1E and DLA packaging standards must be followed, including compliance with MIL-STD-129 for marking and adherence to specified packaging codes and methods. Ozone-depleting chemicals are strictly prohibited, and any substitutes must be approved unless already authorized by specification. The item must be shipped via the fastest traceable means, with parcel post explicitly forbidden. Technical compliance is governed by multiple reference drawings dated April 10, 2022, and the supplier must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and the handling of covered defense information. Full and open competition applies, with no set-aside designation. The contract enforces a zero variance in quantity, and the required delivery date is August 5, 2026. All documentation and compliance are tied to the DLA Master List of Technical and Quality Requirements, and the supplier must be prepared to support government audit and data tracking needs, including designated points of contact and supply chain identifiers.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7L1-26-T-913C
This contract issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-913C seeks one unit of NSN 3040-01-628-1622, identified as W S DARLEY & CO P/N X8102, under the CAM,CONTROL designation. The item must be delivered within five days of award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is designated as RDD 999/NMCS with transportation governed by DLAD PROC NOTE C19 and C20. The delivery destination is the Reparable Issue Point at Camp Kinser, with distribution managed through M20220. The required delivery date is August 3, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, applicable based on acquisition size and amendment dates. The unit of issue is each (EA), and the contract is classified under NAICS code 333613 with no set-aside designation. Primary point of contact is Kristina Derry, reachable at the provided phone and email.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
RADIATOR, ENGINE COO
Solicitation # SPE7L1-26-T-915A
This contract is for the procurement of five engine radiator units identified by NSN 2930-01-709-2109 and part number 2604117C92, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 20 days from the date of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the origin point, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. The item must not contain any Class I ozone-depleting chemicals, and mercury or mercury-containing compounds are prohibited unless specifically exempted for approved applications such as certain batteries, lighting, instruments, or chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Substitute chemicals require prior approval unless authorized by the specification. The end user is the Jordan Armed Forces, with freight shipping directed through Serra International Inc. in Newark, New Jersey, and the order is managed under the Defense Logistics Agency using the unit of issue EA. The solicitation number is SPE7L1-26-T-915A, with a required delivery date of August 4, 2026, and the contract falls under NAICS code 333618 for heating equipment manufacturing.
Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L1-26-T-913F
This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of one vehicular bracket, part number 402/H2230 with NSN 2590-01-712-3185, under solicitation SPE7L1-26-T-913F. The item must be delivered within five days of contract award with no tolerance for quantity variance, shipped FOB origin, and inspected and accepted at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and palletization per DLA’s packaging requirements. The item must be marked with the provided special marking code and shipped via traceable freight methods, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any form and requires any substitute materials to be submitted for approval unless explicitly authorized by the specification. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on the acquisition size. The unit of issue is established per DoD standards, and the item is designated for government use with specific identification codes including IPD, DIC, and project references. The required delivery date is August 3, 2026, and the contract’s point of contact is Kristina Derry of the Land Supply Chain organization.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7L1-26-T-912N
The contract pertains to the procurement of one cylinder assembly, actuating, linear, identified by NSN 3040-01-651-0388 and part number AVP-0.75X2.25-R, with a quantity of one unit. Delivery is required within ten days from the contract award, with delivery terms set at FOB origin and no quantity variance permitted. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and container specifications. Marking must adhere to MIL-STD-129 with no special marking required. The item is subject to DLA's Packaging Requirements for Procurement and palletization standards, with shipments directed to the Distribution Management Office at Camp Kinser, Japan. Transportation and freight details reference specific DLA procedural notes, and the item is marked for delivery to MWSS 172. The solicitation number is SPE7L1-26-T-912N, with a response deadline of August 17, 2026, and the original required delivery date is July 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced under R and I numbering, with the applicable revision tied to the solicitation or award date depending on acquisition size. The contracting agency is the Department of Defense under the Land Supply Chain, and the point of contact is Kristina Derry.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RING
Solicitation # SPE7L1-26-T-910S
The contract pertains to the procurement of 1,220 units of a spacer ring identified by NSN 5365-15-120-2240 and part number 60154625, supplied by IVECO DEFENCE VEHICLES S.P.A. The item is classified as a commercial item and must comply with technical and quality requirements referenced from the DLA Master List, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise stated. Attributes are assigned verification levels or AQLs based on criticality, with unspecified attributes treated as major. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings, and palletization in line with DLA standards. Delivery is FOB origin with a 171-day lead time, inspection and acceptance occurring at the destination. The unit of issue is each, with a total price of $1,220.000. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original required delivery date set for May 12, 2027, and a need ship date of January 31, 2027. Transportation protocols and freight details are governed by DLA procedural notes C19 and C20. The solicitation was issued under SPE7L1-26-T-910S, with the response deadline on August 12, 2026, and falls under NAICS code 332119.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-911E
The contract pertains to the procurement of one unit of a COVER, ACCESS item identified by NSN 5340-01-260-9890, with a delivery requirement of 10 days after award. The solicitation, issued under number SPE7L1-26-T-911E, is governed by DLA packaging and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation issue date or award date depending on acquisition size. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, or corresponding AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless otherwise stated, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. This is a PRI QML-restricted item, limiting award exclusively to accredited manufacturers or distributors listed on the current PRI QML, with distributors required to offer products from accredited manufacturers. Prior to award, the buyer must verify the vendor’s accreditation status and retain a dated copy of the PRI QML in the contract file. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details