Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Retaining Ring Manufacturing and Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Defense Logistics Agency under the Department of Defense involves the full manufacturing, quality assurance, packaging, and delivery of retaining rings identified by NSN 5325-01-128-6484. The project falls under NAICS code 332510 and requires strict adherence to military specifications, specifically ASTM D3951 and MIL-STD-129, to ensure all components meet rigorous defense standards. The agreement focuses on the end-to-end supply chain process, from initial production to final delivery. All deliverables must comply with the established quality assurance protocols and packaging requirements mandated by the agency to maintain operational readiness and technical compliance.

General Info

Subcontract with DLA for manufacturing and delivering retaining rings meeting military specifications.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A622R0412.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RING, RETAINING

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 11

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full manufacturing, quality assurance, packaging, and delivery of retaining rings (NSN 5325-01-128-6484) per military specifications including ASTM D3951 and MIL-STD-129.

Similar Contracts

Same NAICS industry code

Supply of Clamp, Block (NSN: 5342016858223)

LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Supply of Lock Pins (NSN 5315005970499)

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310-00-995-1197)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

STUD ASSEMBLY, TURNL

Solicitation # SPE4A6-26-T-26TH

Solicitation SPE4A6-26-T-26TH, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for 13 units of Stud Assembly, Turnlock Fasteners (NSN 5325-00-594-6267). The requirement specifies a delivery timeframe of 5 days after receipt of order, with shipping terms set as FOB Origin via the fastest traceable means. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. The contract includes stringent regulatory and technical requirements, including CMMC Level 2 certification via a C3PAO and compliance with ITAR and EAR export controls. Technical data access is restricted to approved US/Canada Joint Certification Program participants. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Additionally, the offeror must comply with the Buy American Act, the Berry Amendment, and various DFARS clauses regarding telecommunications equipment and cybersecurity. Invoicing and payment processing are to be managed through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

FASTENER SNAP ASSEM

Solicitation # SPE4A6-26-T-26RJ

Solicitation SPE4A6-26-T-26RJ, issued by the DLA Aviation ASC Commodities Division, is for the procurement of 45 units of Fastener Snap Assemblies under NSN 5325-01-191-3418. Each assembly is a commercial item consisting of one metallic eyelet (P/N MS27980-8B), one cap snap fastener (P/N MS27980-2B), one stud snap fastener (P/N MS27980-7B), and one socket snap fastener (P/N AN227-7B). The hardware must be manufactured to the current revision of the defining military part standard, specifically referencing Technical Data Package BASIC UNK AN227 Revision 9 dated February 14, 2019. Delivery is required within 20 days after receipt of order to a consignee in Spangdahlem, Germany, with inspection and acceptance occurring at the destination. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance requires zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment must be processed electronically through the Wide Area WorkFlow system. The solicitation allows for a price evaluation preference for certified HUBZone Small Business Concerns and explicitly prohibits the use of additive manufacturing for the produced items.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

PIN, GROOVED, HEADLESS

Solicitation # SPE4A7-26-T-695J

Solicitation SPE4A7-26-T-695J is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Aviation, for the procurement of eight headless grooved pins identified by NSN 5315-01-417-8548. The requirement is managed under NAICS code 332510, with an original required delivery date of May 25, 2027. Delivery is set for FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging data, MIL-STD-129 for marking, and RP001 for DLA packaging requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements under RA001. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment processing must be conducted electronically through the Wide Area WorkFlow system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

WHEEL, SOLID, METALLIC

Solicitation # SPE7LX-26-U-9815

Solicitation SPE7LX-26-U-9815 is a request for quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of 56 solid metallic wheels, identified by NSN 5340-01-063-5825. This is a Service-Disabled Veteran-Owned Small Business set-aside that may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars. The contract includes a guaranteed minimum quantity of 8 units and a minimum delivery order quantity of 14 units, with a delivery lead time of 210 days. Award is based on the price quoted for the estimated annual demand and may be processed via automated award. The contractor must adhere to strict technical and quality standards, including reference drawing 19207 12274455 and QAP 16236. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and special packaging instruction AK10635825. Key regulatory requirements include CMMC Level 2 certification, compliance with the Buy American Act and Berry Amendment, and the prohibition of Class I ozone-depleting chemicals. Technical data is subject to ITAR or EAR export controls. Inspection and acceptance will occur at the destination, and all invoicing must be processed through the Wide Area WorkFlow system.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7L5-26-T-5309

Solicitation SPE7L5-26-T-5309 is a request for quotations issued by DLA Land and Maritime for the procurement of 322 units of shims, identified by NSN 5365-00-597-5111. This small business set-aside under NAICS 332510 requires delivery within 105 days after receipt of order, with a need ship date of June 9, 2026, and a final required delivery date of August 14, 2026. The items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona. The contract mandates strict quality and technical compliance, requiring manufacturers to adhere to ISO 9001:2015 standards. Inspection and acceptance will occur at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific prohibitions against the use of mercury or mercury-containing compounds in preservation and packaging per NAVSEA 5100-003D. Additionally, the procurement is subject to the Buy American Act and the Berry Amendment. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

LAND SUPPLIER OPNS ENGINES

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7L5-26-T-5310

Solicitation SPE7L5-26-T-5310 is a small business set-aside issued by DLA Land and Maritime for the procurement of 595 lock pins, identified by NSN 5315012977866. The requirement is categorized under NAICS code 332510 and specifies a delivery timeline of 41 days after order with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, requiring packaging per ASTM D3951 and marking and labeling in accordance with MIL-STD-129. Palletization must follow RP001 DLA Packaging Requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required.

LAND SUPPLIER OPNS ENGINES

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-25XV

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-10U2

Solicitation SPE7L1-26-T-10U2 is a request for quotations issued by the Defense Logistics Agency for the procurement of 46 nonmetallic bumpers, identified by NSN 5340-01-148-8935. This is designated as a critical application item with a non-extendable shelf life of 60 months. The procurement specifies part numbers J-13898-2 from Lord Corporation and RH-8935 from Redhawk EMS Inc. Delivery is required by February 22, 2027, with a need ship date of January 16, 2027, shipping FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements and requiring sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials and shelf-life marking. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-70B4

The contract pertains to the procurement of 108 blind rivets with the NSN 5320-00-113-1665, issued under solicitation number SPE4A6-26-T-70B4 by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on May 25, 2026, with a response deadline of June 2, 2026, and falls under the NAICS code 332722, which corresponds to the manufacture of rivets and similar fasteners. There is no set-aside designation applied to this solicitation, indicating it is open to all eligible contractors without preference for small businesses or other categories. The place of performance and official office address details are not specified, though the contracting entity is based in the United States. Interested parties must submit responses through the DIBBS portal using the provided UI link before the deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Sediment Strainer (NSN 4730-01-589-9155)

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Schneider Electric Storage Battery (APC)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 23 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

Battery Manufacturing

POSTED

about 23 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of four decals, identified by NSN 7690012629486 and Boeing part number BACM9L10AVM. This acquisition is an FMS requirement for Greece, with a rapid delivery schedule of five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Delivery, inspection, and acceptance are all set as FOB Origin, with the final destination located in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and shelf-life labeling. Palletization must comply with DLA packaging requirements (RP001), and the use of plastics for wrapping or cushioning should be avoided where possible. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions under the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Commercial Printing (except Screen and Books)

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS