Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

RF Cable Assembly Fabrication (NSN 5995-01-628-8047)

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the full assembly and testing of Radio Frequency cable assemblies under NSN 5995-01-628-8047 for the DLA Weapons Support ASC Commodities Division. The scope of work includes cutting, stripping, crimping, or soldering RF coaxial cabling and applying protective sleeving according to technical drawings. To ensure signal integrity, the contractor must utilize network analyzers for testing and deliver two completed assemblies. The project requires strict adherence to ISO 9001:2015 certification and MIL-STD-129 compliance. Performance will take place in Cherry Point, North Carolina. Interested parties must respond by October 21, 2026, for this Department of Defense requirement categorized under NAICS code 334220.

General Info

Assemble and test two RF cable assemblies for DLA in Cherry Point, NC.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-3844.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, RADIO F

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs the full assembly and testing of Radio Frequency (RF) cable assemblies for prime contractors on DLA Weapons Support ASC projects. Cuts and strips RF coaxial cabling, crimps or solders RF connectors, and applies protective sleeving per technical drawings. Uses network analyzers for signal integrity testing. Requires ISO 9001:2015 certification and MIL-STD-129 compliance. Delivers two completed and tested RF cable assemblies.

Similar Contracts

Same NAICS industry code

PLATE, ANTENNA MAST

Solicitation # SPE4A5-27-T-0982

Solicitation SPE4A5-27-T-0982 is a total small business set-aside issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of eight antenna mast plates, identified by NSN 5985-01-467-9913. The requirement is managed under NAICS code 334220 and utilizes the First Destination Transportation program to optimize shipping costs. Delivery is required at the DLA Distribution Depot Oklahoma at Tinker AFB, with a need ship date of April 6, 2027, and an original required delivery date of June 11, 2028. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and RP001. Due to the nature of the item, the contract incorporates rigorous export control regulations under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to access technical data. Additionally, the agreement includes critical cybersecurity requirements for safeguarding covered defense information per DFARS 252.204-7012 and NIST SP 800-171. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-388L

Solicitation SPE7M1-26-T-388L is a Request for Quotations issued by the DLA Land and Maritime Maritime Supply Chain for the procurement of five waveguide components, identified as critical application items under NSN 5985-01-601-8828 and part number 133680-97. The procurement requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of June 24, 2026, and shipping terms set as FOB Origin. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and offerors are encouraged to provide quantity ranges. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 for labeling and RP001 for palletization, with non-hazardous materials following ASTM D3951. Technical evaluation for alternate offerors requires a complete data package for both approved and alternate parts, while items produced via additive manufacturing are ineligible for award unless specifically authorized. Compliance requirements include the Buy American Act, CMMC Level 2 Self-Assessment, and the use of the Wide Area WorkFlow system for electronic invoicing and payment. Inspection and acceptance will occur at the destination per FAR 52.246-1.

MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M5-27-T-0944

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

ADAPTER, MICROPHONE

Solicitation # SPE7M5-27-T-0957

Solicitation SPE7M5-27-T-0957 is a total small business set-aside issued by the DLA Weapons Support Active Devices Division for the procurement of 1,956 microphone adapters (NSN 5965-01-528-9290). The requirement is under NAICS code 334220 and is being processed via the First Destination Transportation program with delivery terms set as FOB Origin. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of July 4, 2027, and a delivery window of 228 days after receipt of order. This procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA training to access technical data. The contract mandates compliance with the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity standards. All packaging and marking must adhere to MIL-STD-129 and MIL-STD-2073-1E. Invoicing and payment will be managed electronically through the Wide Area WorkFlow system. Offers involving additive manufacturing are ineligible for award, and a HUBZone price evaluation preference may be applied. Quotations must be submitted via the DLA Internet Bid Board System by October 26, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

AMPLIFIER SUBASSEMBLY

Solicitation # SPE7M5-27-T-0943

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

RADOME, POLARIZER

Solicitation # SPE7M5-26-T-541P

DLA Land and Maritime is soliciting quotes for the procurement of six Radome Polarizers under NSN 5985011575180. This is a total small business set-aside opportunity under NAICS code 334220, with delivery required to the General Depot of Naval Supplies within 20 days after the order is received. Approved sources for this equipment include 3B150 928356-1, 54X10 928356-1, and 63592 928356-1. The solicitation, identified as SPE7M526T541P, is available exclusively in electronic format, and no hard copies, specifications, or drawings are provided. Interested and responsible sources must submit their quotes electronically by the deadline of October 13, 2026. All inquiries regarding this procurement should be directed to the buyer via the DIBBS portal or the provided contact email.

ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

LINE, RADIO FREQUENCY T

Solicitation # SPE7M5-27-T-0934

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M5-27-T-0942

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPRAL1-26-R-0019

The Department of Defense, through DLA Land and Maritime, is soliciting the procurement of 10 radio sets, identified by NSN 5820-01-696-4090 and part number 0195-2300-03T from L3 Technologies, Inc. This unrestricted procurement will be conducted under FAR part 15 contracting by negotiation procedures. The final award decision will be based on a combination of price, delivery, and past performance. The required delivery timeframe is 304 days, with shipments sent FOB Destination to DLA Distribution Albany, Georgia. Best commercial packaging is acceptable, though the government has inquired about the ability to provide standard commercial packaging with MIL-STD-129 markings. The solicitation will be available on DIBBS starting September 29, 2026, with proposals accepted via DIBBS upload, email to Jason Raines, or hard copy submission to DLA Weapons Support Columbus. The contracting officer may employ an anonymous online reverse auction to conduct price discussions, where the final auction price will serve as the final proposal revision. All offers must be submitted in English and US dollars. While this effort began as a market survey to determine commercial practices and pricing, it has transitioned into a formal solicitation under NAICS code 334220.

DLA Weapons Support Defense Supply Center Columbus

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Solicitation # SPE7M1-26-U-4462

The solicitation SPE7M1-26-U-4462 requests the procurement of 165 antennas with NSN 5985-01-584-7883 under an indefinite-delivery contract structure, specifically a unilateral simplified indefinite-delivery contract (SIDC), with a maximum contract value of $350,000 and a guaranteed minimum order of 24 units to be issued after award. Delivery must be completed within 183 days after award, with FOB Destination terms applying, and inspection and acceptance will be conducted by the government at the final destination. Packaging and marking must fully comply with MIL-STD-2073-1E and MIL-STD-129, including the use of 2D Data Matrix barcodes for logistics tracking, and adherence to DLA’s RP001 packaging requirements. Preservation methods are specified as CLNG/DRY (Pres Method 31), with hazardous materials subject to additional controls under IP025 and the OSHA Hazard Communication Standard (29 CFR 1910.1200), requiring pre-award submission of hazard labels for non-exempt materials. All items must be labeled with the NSN and accompanied by safety data sheets, and compliance with applicable DFARS clauses such as 252.223-7001, 252.203-7000, and 252.204-7009 is mandatory, including whistleblower notifications and restrictions on disclosure of cyber incident information. The contract incorporates multiple FAR clauses with deviations under Deviation 2026-00038, including postaward small business representation with Alternate I, employment eligibility verification, combating trafficking in persons, and accelerated payment provisions for small business subcontractors. Contract administration requires all invoicing to be submitted exclusively through Wide Area WorkFlow (WAWF), and the contracting officer’s representative and payment office details are to be furnished in the award documentation. The solicitation references the DLA Master List of Technical and Quality Requirements for all applicable R and I numbered specifications, and while the Statement of Work (Section C) is not provided, technical and quality requirements are implied through mandatory compliance with referenced military standards. Offerors must submit proposals electronically via DIBBS by July 30, 2026, and are required to complete all representations and certifications including UEI, CAGE code

MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

COUPLER, DIRECTIONAL

Solicitation # SPE7M5-27-T-0964

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

FILTER, RADIO FREQUENCY

Solicitation # SPE7M5-27-T-0936

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider is responsible for performing specialized packaging and marking in strict accordance with ASTM D3951 and MIL-STD-129 for palletization. Additionally, the contractor must apply identification marking using MIL-SPEC materials and labeling systems as required by MIL-STD-130N. The scope of work includes the coordination and delivery of fully packaged, marked, and palletized shipments to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Manufacture of Plain Blind Rivet Nuts (NAS1330)This subcontract involves the manufacture and supply of 120 plain blind rivet nuts, identified by NSN 5310-01-333-5506, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be produced in strict accordance with NAS1330 Revision 12, with specific thread compliance for Class 3A and 3B threads verified through FED-STD-H28/20 System 22 gauging. Additionally, all items require bare item marking per MIL-STD-130N and must be delivered with a Certificate of Conformance. The project requires the use of precision machining and specialized thread gauging equipment to meet Department of Defense standards. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 21, 2026, for this requirement categorized under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThis subcontract for Defense-Compliant Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and performing final packing and labeling for 13 units. All work must adhere to ASTM D3951 and RP001 standards for packing and MIL-STD-129 for labeling to ensure compliance for delivery to DLA Distribution DDSP New Cumberland. The service provider is responsible for preparing shipments specifically for the First Destination Transportation program, with delivery handled as FOB Origin. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 561910, with performance taking place in New Cumberland.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Precision Machining and Fabrication of Rigid Connecting LinksThis subcontract involves the precision machining and fabrication of 13 Rigid Connecting Links for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the production of links according to Honeywell part number 2-160-264-01 specifications, utilizing CNC machining and precision grinding to ensure exact tolerances. The contractor must strictly adhere to the DLA Master List of Technical and Quality Requirements and follow quality sampling standards set by MIL-STD-1916 or ASQ H1331. Performance of the work will take place in New Cumberland, Pennsylvania, with the final deliverable being 13 finished Rigid Connecting Links.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Military-Grade Fastener Packaging and Preservation

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Precision Close Tolerance Screw Manufacturing

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Turnlock Fastener Stud SupplierThis subcontract involves the manufacture or sourcing of 143 specialized turnlock fastener studs, specifically Paneloc Corp part number S7300F1-37 under NSN 5325000508900, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The items are to be delivered FOB Origin to Robins Air Force Base. The supplier must adhere to strict quality and packaging standards, including MIL-STD-1916 or ASQ H1331 for sampling, and MIL-STD-2073-1E and MIL-STD-129 for packaging. Additionally, the contract mandates full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regulations.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging and marking for prime contractors fulfilling DLA supply contracts. The scope of work requires packaging critical hardware components according to ASTM D3951 standards and ensuring all markings and labels comply with MIL-STD-129. The contractor is responsible for delivering shipments that are fully prepared for transport and coordinating FOB Origin shipment to the DLA Distribution Depot Oklahoma at Tinker AFB. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the project falls under NAICS code 493110. The place of performance is located at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

General Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Self-Locking Nuts with Extended Double WashersThis subcontract involves the manufacturing and supply of 82 specialized self-locking nuts with extended double washers for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fasteners must be produced according to NSN 5310010259992 specifications and the DLA Master List of Technical and Quality Requirements, with quality assurance sampling conducted per MIL-STD-1916 or ASQ H1331. All materials used must be domestic and compliant with the Buy American Act and the Berry Amendment. The performance of this contract is centered at Tinker AFB, and the procurement falls under NAICS code 332722 for critical application fasteners.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and Marking ProviderThis subcontract involves providing specialized packaging and marking services for military hardware on behalf of prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to ASTM D3951 and RP001 for packaging, while shipments must be marked according to MIL-STD-129 and RQ017 standards. The provider is expected to utilize military-standard labeling and marking equipment to prepare retail and shipping containers. The final deliverables are destined for the Naval Undersea Warfare Center Division Keyport, with the place of performance located in Keyport, Washington. This opportunity falls under NAICS code 488510 and is managed under the Department of Defense. Interested parties should note the response deadline of October 21, 2026.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Manufacturer of Retaining Rings (NSN 5325-00-660-1518)This subcontract involves the fabrication and supply of four precision-engineered retaining rings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The rings must be manufactured according to NSN 5325-00-660-1518 specifications and adhere to the DLA Master List of Technical and Quality Requirements RA001. Quality control and sampling processes are required to meet MIL-STD-1916 or ASQ H1331 standards. The contract mandates strict compliance with the Buy American Act and the Berry Amendment regarding material sourcing. Performance will take place in Keyport, Washington, with delivery terms set as FOB Origin. Interested parties must respond by October 21, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Procurement and Supply of NRP Fitting Assembly G2This subcontract involves the procurement and supply of two NRP Fitting Assembly G2 units, part number 70209-26012-047, for prime contractors supporting DLA Weapons Support ASC projects. The selected provider must source the components from authorized manufacturers, verify all Source Approval Request documentation, and ensure that all items are marked in accordance with MIL-STD-129. The contractor is required to maintain SAE AS9120 certification and manage logistics based on FOB Origin requirements. Final delivery, including full quality certification, must be made to DLA Distribution DDSP New Cumberland. This effort falls under NAICS code 423840 and is managed by the Department of Defense.

Industrial Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS