This Solicitation opportunity from California was posted on March 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RFP 1014 Warehouse Construction

Closed

WO 394300State & Local

Submission Closed04/23/2026, 09:00:58 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 236210

New

AMC-0171 LOU ATCT Public Announcement

Solicitation # amc-0171-lou-atct-public-announcement

Solicitation AMC-0171-LOU-ATCT involves a combination of electrical and architectural improvements located in Kentucky. The electrical scope focuses on LPGBS corrections, including the installation of surge protective devices, air terminals, grounding gates, and work on parking lot light poles. Architectural requirements encompass exterior siding reinforcement, rust removal, protective painting, caulking, and the replacement of handrails. The estimated construction value for this project is between 250,000 and 500,000 dollars. Managed by PTSI Managed Services Inc. (Parsons), this opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. The solicitation was posted on October 27, 2026, with a response deadline of November 8, 2026. Interested parties should coordinate through the primary point of contact, Kurtis Kinard, regarding this NAICS 236210 classified project.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

AMC-169 CVG ATCT Public Announcement

Solicitation # amc-169-cvg-atct-public-announcement

The AMC-169 CVG ATCT project is a comprehensive facility improvement solicitation managed by PTSI Managed Services Inc. (Parsons) located in Kentucky. With an estimated value between 1,000,000 and 5,000,000 dollars, the scope of work encompasses a wide range of multidisciplinary repairs. Key tasks include mechanical upgrades such as testing internal fan units and replacing disconnect switches and gates, as well as structural and architectural restorations involving PVC roof replacement, roof hatch and drainage repairs, and the replacement of insulation, doors, railings, and tiles. Civil improvements are also required, specifically focusing on asphalt milling, sidewalk work, parking lot sign replacement, and sealing CMU wall joints. This opportunity is designated as an SBA set-aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties must respond by November 2, 2026, under NAICS code 236210.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

ASO-1230-00 VOR counterpoise and roof replacement in Marianna, FL

Solicitation # aso-1230-00-vor-counterpoise-roof-replacement-marianna-fl

This solicitation, managed by Parsons, involves the removal and replacement of the roof and the installation of a new counterpoise system at the VORTAC facility located in Marianna, Florida. The project falls under NAICS code 236210 and is open to various small business types, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of January 28, 2027. The primary point of contact for this opportunity is Quentin Wack.

POSTED

DEADLINE

AMC-0158 NEW RTR Public Announcement

Solicitation # amc-0158-new-rtr-public-announcement

This solicitation, managed by PTSI Managed Services Inc. (Parsons), involves a comprehensive set of facility repairs and upgrades in Louisiana. The scope of work encompasses electrical corrections to replace corroded disconnects, mechanical replacements for AHU and CU units, and civil repairs including grading and gravel addition. Additionally, the project requires structural reinforcement and concrete crack repair, alongside architectural improvements such as sandblasting, painting, and the replacement of plywood walls and gypsum ceiling panels. The estimated construction value for this project is between 500,000 and 1,000,000 dollars. This opportunity is designated as a small business set-aside, open to various certified categories including SDB, WOSB, HUBZone, and VOSB entities. Interested parties must respond by November 1, 2026, under NAICS code 236210.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

AMC-0174 OWB ATCT Public Announcement

Solicitation # amc-0174-owb-atct-public-announcement

This solicitation, managed by PTSI Managed Services Inc. (Parsons), involves a multi-disciplinary construction project located in Kentucky with an estimated value between 500,000 and 1,000,000 dollars. The scope of work encompasses electrical upgrades including arc flash studies and SPD replacement, roof replacements using EPDM membranes, and the installation of new rooftop and condensing mechanical units. Architectural requirements include interior lighting and emergency light replacement, wall painting and patching, rust repair, and the installation of new handrails and door hardware. The opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, and VOSB certifications, under NAICS code 236210. Interested parties must submit their responses by the deadline of March 21, 2027. Primary coordination for this project is handled by Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

Concrete Structure & ReinforcementThis subcontract for the California Department of Transportation involves the supply and installation of concrete structures and reinforcing steel for prime contractors on various infrastructure projects. The scope of work includes welding reinforcement, installing partially fabricated cages, and utilizing macro/micro synthetic fibers along with expanded polystyrene foam block-outs. The contractor is responsible for the delivery of all installed concrete structures and reinforcement cages. To ensure quality and regulatory adherence, the provider must submit mill certificates for all rebar and certificates of compliance for the cages. Responses for this opportunity are due by December 8, 2026.

California Department of Transportation

POSTED

DEADLINE

Facilities & Parks New Supply Warehouse Building

Solicitation # ITB FM 04-27

Okaloosa County, Florida, is soliciting bids under ITB FM 04-27 for the construction of a new 9,000 square foot metal supply warehouse for the Facilities and Parks Department located at 5489 Old Bethel Road in Crestview. The project aims to expand storage capacity and includes comprehensive site preparation, civil engineering for roadway or parking improvements, and the installation of mechanical, electrical, plumbing, and telecommunications systems. All work must comply with the 2023 8th Edition Florida Building Code, ADA standards, and OSHA regulations, with specific structural requirements to withstand ultimate wind speeds of 160 MPH. The contract will be awarded to the responsive and responsible vendor offering the lowest bid, provided they meet financial stability and registration requirements, including SAM.gov registration for grant-funded components. The selected contractor must provide a dedicated project manager and implement a quality control plan, with a total performance period of 12 months from the notice to proceed. Key compliance mandates include adherence to the Davis-Bacon Act for prevailing wages, Buy America certifications for materials, and strict anti-trafficking and non-discrimination policies. Bids must be submitted electronically via OpenGov by November 4, 2026, and must include a performance bond and comprehensive insurance coverage.

POSTED

DEADLINE

F-35 Composite Repair and Training Facility / F-35 Maintenance Facility, Hill Air Force Base, Utah

Solicitation # W9123827X

The U.S. Army Corps of Engineers, Sacramento District, is announcing an upcoming competition for the design and construction of an F-35 Composite Repair and Training Facility and an F-35 Maintenance Facility at Hill Air Force Base, Utah. The total program funding is estimated at 157,886,000 dollars for the repair and training facility and 213,716,000 dollars for the maintenance facility. The project involves the construction of specialized industrial spaces, including clean rooms, paint bays, and secure areas complying with Intelligence Community Directive 705 standards, all designed as permanent construction meeting Department of Defense Unified Facilities Criteria. The acquisition will be conducted under an Other Transaction framework using either a Progressive Design-Build or Construction Manager at Risk approach. The selection process will involve a two-step competitive sequence consisting of white paper submissions and pitch meetings to select a single entity for design and construction services. Interested parties must possess a Cybersecurity Maturity Model Certification Level 1 self-assessment. An informational virtual Industry Day is scheduled for November 17, 2026, with a registration deadline of November 12, 2026.

W075 Endist Sacramento

POSTED

DEADLINE

Tinker AFB 2026 Multiple Award Construction Contract (MACC)

Solicitation # FA8137-26-R-0040

Solicitation FA8137-26-R-0040 is a competitive Indefinite Delivery Indefinite Quantity (IDIQ) Multiple Award Construction Contract (MACC) for general construction services at Tinker Air Force Base, Oklahoma. The contract encompasses a broad range of sustainment, maintenance, repair, alteration, renovation, and minor construction projects. Work execution is categorized into three methods: Design-Build, Construction with Limited Design, and Construction Only. The MACC has a total aggregate maximum value of 950 million dollars, with a minimum guarantee of 500,000 dollars per awarded contract. The period of performance consists of a five-year base period starting March 26, 2027, with one five-year option period. The procurement is divided into a Small Business Pool, which is a 50 percent set-aside, and a Full and Open Pool. Awards are based on the Highest Technically Rated Offeror (HTRO) methodology, utilizing a Minimum Technical Threshold Rating (MTTR) based on validated self-scored matrices for technical experience, design experience, certifications, and staffing. There is no cost or price evaluation at the IDIQ level. Offerors must be registered in the System for Award Management and meet CMMC Level 1 certification requirements. Following several amendments, the final proposal response deadline was extended to November 16, 2026.

POSTED

DEADLINE

Modular Building FabricationThis subcontract involves the fabrication of prefabricated modular duplex units for prime contractors working on Parks Canada Agency projects located in Lutsël K’é, Northwest Territories. The selected provider is responsible for manufacturing the units according to approved designs, implementing a Factory Quality Management Plan, and performing essential factory air-tightness testing to ensure quality and performance. To facilitate delivery to the remote site, the contractor must reinforce the units to withstand the stresses of barge and air transport. The final deliverable consists of completed, factory-tested modular units that are fully prepared for shipment to the place of performance in Canada.

POSTED

DEADLINE

IFB 06-26 Biochar Facility Construction

Solicitation # IFB-06-26

The Southeastern Public Service Authority of Virginia (SPSA) is soliciting bids for the construction of a 40,872 square foot biochar processing plant located in Portsmouth, Virginia. The facility is designed to manage the organic portion of the SPSA SORT System. The successful contractor will be responsible for providing all labor, materials, and warranties to deliver a fully operational facility, which includes coordinating construction activities with SPSA and AMP regarding the installation and commissioning of specialized equipment. The contract will be awarded to the lowest responsive and responsible bidder, with evaluations based on technical compliance, the ability to meet quality standards, and the provision of descriptive literature and references for similar completed projects. Key requirements include the submission of performance and labor and material payment bonds totaling 50 percent of the contract amount and adherence to strict safety and accessibility standards, including the Americans With Disabilities Act. Bidders must provide one original and four copies of their bid, along with an electronic copy on a flash drive, by the deadline of November 20, 2026. The contractor is required to provide as-built drawings upon completion and must comply with various federal and state regulations, including drug-free workplace and non-discrimination provisions. All work must be performed in accordance with the CED Project Manual and associated drawings, with specific quality assurance testing for concrete and asphalt as outlined in the inspection criteria.

Southeastern Public Service Authority

POSTED

DEADLINE

IE181 - WHS Greenhouse Construction

Solicitation # 140A2327Q0297

Solicitation 140A2327Q0297 is a fixed-price contract set aside exclusively for Indian Small Business Economic Enterprises (ISBEE) to design and install an educational greenhouse facility at Wingate High School in Fort Wingate, New Mexico. The project, estimated between $100,000 and $250,000, involves a comprehensive scope of work including foundation installation, utility connections, greenhouse structure and glazing, ventilation, environmental controls, heating, and electrical systems. The work must be performed at a remote high-desert site at an elevation of approximately 6,900 feet on an occupied K-12 campus. The maximum allowable period of performance is 120 calendar days from the Notice to Proceed. Award will be made based on the Lowest Price Technically Acceptable (LPTA) method to a responsible offeror who meets all technical requirements, including the submission of a project-specific Quality Control Plan and a qualified project management team. Key requirements for offerors include registration in SAM.gov, current New Mexico contractor licensure for general building, electrical, and mechanical/gas work, and any necessary Navajo Nation tribal business licenses. Additionally, a bid bond is required for any quote exceeding $35,000. Proposals must be submitted to the Bureau of Indian Education by November 19, 2026, at 12:00 PM MDT, and must include a signed quote, UEI number, and the required Indian Economic Enterprise Representation.

Indian Education Acquisition Office

POSTED

8 days ago

DEADLINE

in 23 days

AI Contract Overview

The contract requires the contractor to deliver a fully code-compliant, turnkey product for the 1014 Warehouse project, encompassing grading, pad certification, fire protection and alarm systems, utility connections, permits, inspections, and storage racking permits. The contractor is responsible for finishing the project and obtaining all necessary permits. A comprehensive access badge reader system must be installed, including supplying all hardware, wiring, conduit, labor, and other associated costs. The system includes HID MaxiProx readers for vehicle entry and ProxPro II for pedestrian doors, with a SIELOX 1700 controller located near the South IDF room, alongside conduit and CAT6 cabling from the IDF switch. Additionally, the contractor must furnish a burglar alarm system, including wiring, equipment, and labor, with two Siemens controllers at specified locations capable of system activation, along with motion and door sensors tied into citywide monitoring. The fire control panel must be installed as per specified manufacturers or approved equivalents. The scope also includes coordination for trenching activities, with specified conduit installations for fiber optic and future electrical work along the property lines related to motorized gates and EV charger stub-ups. While trenching and conduit installation for some sections will be handled by others, the contractor must tie in and seal conduits into the building. Coordination is also required regarding a motorized storage racking system, where the contractor is tasked with all permits and connection work but not procurement or installation of the racks themselves. All work must comply with the detailed project plans and coordinate closely with City representatives.

General Info

Contractor delivers turnkey, code-compliant 1014 Warehouse with permits, alarms, access systems, and utility connections.

Agency

California → Public Works

NAICS

236210 - Industrial Building Construction

Place of Performance

CA, USA

Set-Aside

NONE

Documents

City of Anaheim 1014 E South St Warehouse Technical Specifications 12-26-2025

276 pages · specifications

High

City of Anaheim Quality Assurance Program Manual (QAP) 2020

quality-assurance-program

High

City of Anaheim Water Services Standard Specifications July 2021

136 pages · standard-specifications

High

Fire Alarm Device & State Fire Marshal Listings - Cerberus PRO FC922/FC924

53 pages · specifications

High

Fire Alarm System Plans for 1014 Warehouse Anaheim CA

5 pages · specifications

High

Fire Alarm System Specifications for 1014 E South St Warehouse

16 pages · specifications

High

Fire Protection Plans for 1014 Warehouse Anaheim CA

2 pages · specifications

High

Fire Sprinkler Plans NFPA 13 for 1014 Warehouse

9 pages · specifications

High

Fire Sprinkler System Specifications for 1014 E South St Warehouse

9 pages · specifications

High

High Piled Storage Permit - 1014 Warehouse Anaheim CA

4 pages · permit-document

High

Hydraulic Calculations Report for City of Anaheim 1CITY OF ANAHEIM

10 pages · hydraulic-calculation-report

High

Hydraulic Calculations Report for City of Anaheim - Job 1CITY OF ANAHEIM

10 pages · hydraulic-calculation-report

High

PLANS_1014 Warehouse Compiled Set - Structural Permit Drawings

90 pages · specifications

High

RFP 1014 Warehouse Construction Anaheim CA

166 pages · rfp

High

RFP 1014 Warehouse Construction Project

31 pages · rfp

High

Special Provisions for Precise Grading - City of Anaheim

86 pages · special-provisions

High

UWM Plans 2025-00039 Approved Water Construction Notes

specifications

High

WQMP2024-01517 Edward's Utility Complex New Warehouse Water Quality Management Plan

133 pages · wqmp

High

ALT_ITEM_#02_-_SKETCH_-_ADDITIONAL_EARTHWORK_AND_IMPROVEMENTS

2 pages · sketch

Low

GRA2024-03976 Approved Document

9 pages · other

Low

Precise Grading Plans Supplemental Rough Grading

2 pages · other

Low

Topographic Survey Map for 1014 E South Street Anaheim

1 page · topographic-survey

Low

Existing_Conditions_Utilities.zip

Geotechnical_Report_Final.zip

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMar 12

Solicitation

Response DeadlineApr 23

Deadline has passed

Submission Closed

04/23/2026, 09:00:58 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → Public Works

Contacts1 person available

OfficeAnaheim, CA, 92805, USA

Organization / AgencyCalifornia → Public Works

Office AddressAnaheim, CA, 92805, USA

Contacts

Jonathan LeggettConstruction Contracts Specialist

contact@example.gov

+1 (555) 000-0000

Interested Companies (24)

BlackStar ContractorsCosta Mesa, CA

CO BrothersRiverside, CA

Ortiz & SonBuena Park, CA

See All 24 Interested Companies

Start a free trial to view all interested companies, their contact details, and full contractor profiles.

Start Free Trial

Full Description

Objective The intent of the Project is to furnish a code compliant product, whether or explicitly outlined herein. The Contractor is required to provide a complete turn-key product. Inclusive of grading, pad certification, fire protection and alarm, utility connection, building code and permits, inspections, storage racking permits, and any other related scope. Contractor shall be responsible for finishing and obtaining all permits for the project. Access Badge Reader In addition to the requirements outlined in the Plans, Contractor shall be required to furnish all hardware, wiring, cabling, conduit, applicable door locksets, labor, and any other expense arising out to delivering a fully operable badge reader system. Controller Contractor shall furnish conduit and CAT 6 patch chord from IDF switch to Access Badge Controller. Controller location shall be as directed by City. Location shall be approximately near South IDF Room. Controller must be SIELOX 1700. Access Badge Reader - Material Access Badge Reader for vehicle entry shall be HID MaxiProx. RFID Vehicle Badge Reader: Tagmaster XT-1 Access Badge Reader for pedestrian door shall be: ProxPro II Access Badge Reader - Location RFID Vehicle Badge Reader - Affixed to gate at a height that meets manufacturer requirements. North Pedestrian Building Entry Door South Pedestrian Building Entry Door Exterior - West Elevation - South Coner - to control motorized vehicle gate exit. Burglar Alarm System Burglar is not shown in the Plans; however, Contractor shall be required to fully furnish a connected system as follows: Contractor shall furnish all wiring, conduit, cabling, equipment, hardware, accessories, labor, and other expenses to fully furnish a burglar alarm system. Contractor is required to furnish two (2) controllers capable of turning the system on/off. Final location for each controller to be determined by City. One controller shall be located near the front door and near the fire alarm control panel. The second controller shall be located near the South pedestrian door. System shall be equipped with motion and door sensors. System shall be capable of connecting to Citywide monitoring. System manufacture shall be Siemens. Fire Control Panel City may approve equivalent substitute panel. Allowable system substitutes include Fire-Lite and Hochiki. Substitutes shall be reviewed and approved during pre-construction phase. Existing Conditions Contractor may re-use existing temporary chain link fence and screen. Alternate Add Item - Trench Review exhibit " YYY - ALT ITEM #02 - SKETCH - ADDITIONAL EARTHWORK AND IMPROVEMENTS. " Part A - Fiber Trench approximately 100' from the North side of the adjacent warehouse located at 847 S. East Street to the IDF room in the South-West corner of the 1014 Warehouse Run approximately 330' of 2' EMT conduit from Dixco IDF room, through the North Dixco wall, and into the trench. Exterior conduit must be ridged. Conduit bends must allow for fiber cable. Final route much be approved by City Network Engineer and not contain sharp bends. Run three (3) 2'' conduit underground. PVC-40 conduit. Part B - Future Electrical Features Trench approximately 70' from the start of the fiber trench all the way until the East property line. Stub up for future motorized gate. connection and ground loops, and 2 badge readers on both sides of the gate. Trench approximately 100' parallel to the East property line and into the new 1014 Warehouse. Furnish at least 6 stub ups along the East property line for future EV chargers. Exact location field directed by City. Cap stub-up at grade. Run four (4) 2'' conduit in the trench. PVC-40 conduit. Pull Boxes Pull boxes to be furnished by City. Contractor shall be required to set and place City provided boxes. Coordination With Others Trenching Contractor shall coordinate with City In-House Labor and/or Others to furnish a trench from the adjacent warehouse located at 847 S. East Street to the South-West corner of the 1014 Warehouse. Contractor shall coordinate with Others to furnish at least three 2'' stub-ups through the 1014 Warehouse building pad. Contractor is not required to perform trenching, back filling, furnishing conduit, setting pull boxes, nor pulling any wire for this portion only. Contractor shall be required to perform tie in which includes connecting exterior pipe through into the building and sealing the penetration. Motorized Storage Racks Contractor shall coordinate with Others for the installation of a motorized storage racking system. Contractor is not required to purchase storage rack material or facilitate installation labor. Contractor shall be required to perform all work arising out of the applicable permits including storage rack and high pile. Contractor shall be required to perform any applicable power and low voltage to connect the system.