RFQ 5130015809478

5130-01-580-9478 UI: EA SCRAPER ATTACHMENT, PNEUMATIC HAMMER DESCRIPTION Overall Length: 6.5 inches Overall Width: 2 inches Overall Thickness: 0.375 inch, tapered to single edge Shank: 0.401 inch with retention notch Material: Bonded Phenolic Resin Features: Non-sparking, Non-conductive, Non-scratching, can be re-sharpened Functional Description: For use with pneumatic hammer or rivet gun during removal of sealants and adhesives. BCW Engineering & Manufacturing p/n: 41002-01 B or equal ? Offering on: Manufacturer's Name: ______________________________ Brand __________________________________________ Model or Part No. __________________________________ FAR Provisions 52.211-6, Brand Name or Equal Applies. In order for the government to make an "or equal" determination of the offered product(s), the Bidder/Vendor must furnish information that specifically addresses each characteristic within the item purchase description. The unit of issue, unit of measure, test methods and results, if required, must also be included. Failure to furnish this information/literature will result in the bid being rejected as non-responsive and will not be considered for award. (see FAR clause 52.211-6). ITEM MARKING Each item Shall Be Marked in a Permanent and Legible Manner with: 1) Manufacturer's Part Number 2) Manufacturer's Name or Identifying Symbol, and 3) Country of Origin Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order. PACKAGING One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. MARKING All unit, intermediate, transport packages and unit loads destined for domestic civilian activities shall comply with the latest edition of FED-STD-123, Marking for Shipment (Civil Agencies) . Unit, intermediate, transport packages and unit loads destined for military shall comply with the latest edition of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/ SPECIAL REQUIREMENTS FOR SHIPMENTS TO ALL COUNTRIES THAT HAVE ENDORSED THE IPPC GUIDELINES FOR TREATMENT OF NON-MANUFACTURED WOOD PACKAGING: The International Plant Protection Convention (IPPC) has approved and published Guidelines for Regulating Wood Packaging Material in International Trade. Countries endorsing the IPPC Guidelines are found at the USDA website usda.gov . General Services Administration Acquisition Manual (GSAM) Clause 552.211-89 requires non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries be marked and properly treated in accordance with IPPC guidelines. In addition, pallets and packing material will comply with DLAD 47.305-1, Compliance with European Union (EU) Restrictions Involving Non-Manufactured Wood Packaging (NMWP) and Pallets and MIL-STD-2073-1, Standard Practice for Military Packaging . HAZARDOUS MATERIAL SHIPMENTS: Packing of hazardous material (HM) supplies for shipments shall comply with the GSAM clause/provision 552.223-73 Preservation, Packaging, Packing, Marking and Labeling of Hazardous Materials (HAZMAT) For Shipments . That is packing of HM for domestic shipments shall comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and OSHA HCS in 29 CFR, part 1910.1200. Packing of HM for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and OSHA HCS in 29 CFR, part 1910.1200, and the applicable IMDG, IATA, ICAO, AFMAN-24, standard for the mode of transportation. Items requiring Safety Data Sheets (SDSs) shall be provided by the contractor as specified in IPD and the FAR Provision/Clause 48 CFR 52.223 3 Hazardous Material Identification and Material Safety Data, and the latest version of Federal Standard 313. One copy of the SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope. UNIT PACKAGES: The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or Edge Crush Test (ECT) 32 Lbs. per Inch Width. ? ? Brand Name or Equal Submissions: FAR Provisions 52.211-6, Brand Name or Equal Applies