Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RIGHT_LEFT PLUG SEAL

Awarded
SPMYM226P7913Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Award notice SPMYM226P7913, issued by the Department of Defense through DLA Maritime Puget Sound, concerns the procurement of right and left plug seals. The contract was awarded as a firm-fixed price acquisition under FAR Part 12, with the place of performance located in Bremerton, Washington. The procurement falls under NAICS code 339991 and was managed by the DLA Weapons Support office. The acquisition was conducted as a sole-source procurement from Northrop Grumman, as documented in the Justification for Other Than Full and Open Competition. This decision was based on the proprietary design of the plug seals and the fact that Northrop Grumman was identified as the only responsible source capable of providing the required components. Market research, including a sources sought notice posted to SAM.gov, yielded no other viable responses, necessitating the direct award to maintain technical requirements.

General Info

DLA Maritime awarded contract SPMYM226P7913 for Right Left Plug Seals in Bremerton, Washington.

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

Contract Value

$779,028

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

NONE

Awardee

NORTHROP GRUMMAN SYSTEMS CORPORATIONView Profile

Award Issued Date

Documents

(1)

SPMYM226Q7175 JFOC for Northrop Grumman plug seals

PDF•justification-and-authorization

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5000, USA
Organization / Agency
Department Of Defense → DLA Maritime - Puget Sound
View Agency Profile
Office AddressBREMERTON, WA, 98314-5000, USA
Contacts
NAOMI LARSON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=685ed16ba6b34b78bd6c374da9d7a387

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
COUPLING, FLEXIBLE
Solicitation # SPE4A7-26-R-0778
Solicitation SPE4A7-26-R-0778 is a request for an Indefinite Quantity Contract (IQC) issued by DLA Aviation for the procurement of flexible couplings, identified as NSN 1660-00-560-4009. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. This item is designated as a Critical Application Item, with approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. The required delivery schedule is 365 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including source approval requests and tailored higher-level quality requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the contractor must complete a CMMC Level 2 self-assessment and comply with DFARS regulations regarding covered defense information and the Buy American program. Item Unique Identification is not required per the service customer's request. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-237G
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 407 units of preformed packing under NSN 5330-00-922-5947. The contract is open for full and open competition with a delivery requirement of 46 days after the order is placed. The items must be completely free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. The procurement is subject to several technical and quality requirements, including DLA packaging standards and configuration change management protocols. Notably, the items are classified as Type I (Code Y) with a non-extendable shelf life of 180 months. All suppliers must adhere to the DLA Master List of Technical and Quality Requirements and comply with regulations regarding covered defense information and the removal of government identification from non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
Federal
SEAL ASSEMBLY KIT
Solicitation # 7017777381
This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.
DLA Land And Maritime

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
53--PARTS KIT,SEAL REPLACE
Solicitation # SPE7L3-26-T-248P
Solicitation SPE7L3-26-T-248P is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of three seal replacement parts kits for mechanical equipment, identified by NSN 5330015981569. This is a fixed-price contract designated as a total small business set-aside under NAICS code 339991. The approved source is listed as 0B9E8 70J600-5. Quotes must be submitted electronically via the DIBBS system by the deadline of September 21, 2026. The required delivery date is November 11, 2027, with a need ship date of March 9, 2027, and a delivery period of 168 days. Delivery is FOB Destination to DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for UV-sensitive items to be sealed in opaque bags per MIL-DTL-117. The contract incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment restrictions. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Award may be determined via an automated process, and a HUBZone price evaluation preference may be applied.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
53--SEAL,INFLATABLE
Solicitation # SPE7L3-26-T-247F
Solicitation SPE7L3-26-T-247F is a Request for Quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 11 inflatable seals identified by NSN 5330002252287. This procurement is set aside exclusively for SBA-certified Women-Owned Small Business (WOSB) concerns. The solicitation was posted on September 11, 2026, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The required delivery date is April 11, 2027, with a need ship date of January 22, 2027, and shipping terms are FOB Destination to the DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-130N for identification. Due to the nature of the items, they must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and comply with MIL-STD-2073-1E and RP001 for palletization. All supplied items must be free of asbestos. Offerors must comply with the Buy American Act and the Berry Amendment, providing full disclosure if non-domestic materials are used. Payment and invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system. The award may be processed as an automated award, and offerors are encouraged to provide quantity ranges in their quotes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
53--O-RING
Solicitation # SPE7L1-26-T-10U5
Solicitation SPE7L1-26-T-10U5 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 14 units of O-rings under NSN 5331014745530. This is designated as a critical application item under NAICS code 339991. The procurement is managed by the Land Supply Chain office in Columbus, Ohio, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The approved source for this item is 0AZ22 V24509-20-07-18. The delivery requirement is set for 147 days after order, with a need ship date of February 16, 2027, and delivery to DLA Distribution San Joaquin in Tracy, California. The contract specifies FOB Origin terms, while inspection and acceptance will occur at the destination per FAR 52.246-1. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129. Invoicing and payment processing are required through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. The solicitation incorporates several FAR and DFARS clauses, including those regarding equal opportunity for workers with disabilities, combating trafficking in persons, and sustainable products. Offerors are assumed to provide supplies of domestic origin unless otherwise indicated.
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
53--GASKET
Solicitation # SPE7LX-26-U-002P
Solicitation SPE7LX-26-U-002P is a request for quotations from the Department of Defense, specifically the Strategic Acquisition Program Directorate under DLA Land and Maritime, for the procurement of gaskets identified by NSN 5330150110674. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual demand is 157 units, with a guaranteed minimum quantity of 23 and an expected average of 12 orders per year. Delivery is required within 97 days of order, with shipments directed to various CONUS and OCONUS DLA Depots. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-117 for the use of medium duty, waterproof, greaseproof, opaque bags to prevent UV deterioration. All quotes must be submitted electronically via the DIBBS portal by September 25, 2026. Award evaluation will be based on the price quoted for the estimated annual demand. Additionally, contractors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and utilize the Wide Area Workflow system for all invoicing and receiving reports. Inspection and acceptance will occur at the destination.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
SEAL,AIR,NONAIRCRAF — 2835014700838 — SPRMM126QHE54
Solicitation # SPRMM126QHE54
This solicitation, issued by DLA Mechanicsburg under FAR Part 12 and FAR Part 18 Emergency Acquisition Flexibilities, seeks quotes for the manufacture of non-aircraft air seals. Award evaluations will be based on the Lowest Price Technically Acceptable criteria. The contract requires strict adherence to item unique identification and marking standards per MIL-STD-130, and packaging must comply with MIL-STD 2073. Contractors must provide the Original Equipment Manufacturer details if they are not the manufacturer and must submit invoices and receiving reports electronically via PIEE-WAWF. The agreement includes specific protocols for design changes, requiring a coded notification system for any substitutions. Additionally, the contract mandates that production facility changes be approved in writing by the Contracting Officer and may require a price reduction to cover administrative costs.
SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
SLED
Specialized Gasketing & Sealing Materials Supply
Procurement-Goods & Services

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 339991
New
DIBBS
O-Ring Supply (NSN 5331002639540)
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supply of Critical Application Gaskets
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supply of Gaskets (NSN 5330017193193)
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

NAICS: 339943
New
Federal
IUID Marking and Data Registration
Marking Device Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 333242
New
Federal
Precision Gear Component Fabrication
Semiconductor Machinery Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 541690
New
Federal
COTS Technical Manuals and Supplemental Data Provider
Other Scientific and Technical Consulting Services

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 333911
New
Federal
Fire System Booster Pump Unit Manufacturer/Supplier
Pump and Pumping Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 333914
New
Federal
8010 FIRE SYSTEM BOOSTER PUMP UNITS
Solicitation # SPMYM226Q0103
This solicitation, numbered SPMYM226Q0103, is issued by the Department of Defense through DLA Maritime - Puget Sound for the procurement of 8010 fire system booster pump units. The project is categorized under NAICS code 333914 and is designated as a total small business set-aside. Interested parties must refer to the attached bill of materials, drawings, salients, and CDRL documents to ensure full compliance with the technical specifications. The response deadline for this opportunity is September 14, 2026. Performance will take place in Silverdale, Washington, and the primary point of contact for this requirement is Tricia Wintersteen. All inquiries and submissions should be directed to the DLA Maritime office located in Bremerton, Washington.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 333612
New
Federal
RING GEAR ASSEMBLY
Solicitation # SPMYM226Q0173
Solicitation SPMYM226Q0173 is a total small business set-aside issued by DLA Maritime - Puget Sound for the procurement of a Ring Gear Assembly and Worm Gear. The requirement is identified as a sole source procurement from Tri Tool Inc, who is the proprietary designer and manufacturer of the associated machining system. The estimated contract value ranges from 15,000 to 350,000 dollars, with an estimated delivery date of September 30, 2026. Supplies are to be delivered FOB Destination to the receiving office in Silverdale, Washington. To be considered responsive, offerors must submit a signed and completed solicitation via email to Armando Saya by September 14, 2026, at 10:00 AM PST. Key submission requirements include providing the contractor's cage code, point of contact, lead time, and manufacturer details. Contractors must comply with NIST SP 800-171 unless the items are identified as Commercial Off The Shelf. Award will be based on technical acceptability, price, and past performance ratings. Invoicing must be processed electronically through the Wide Area Work Flow system. Packaging must adhere to ASTM-D-3951 and MIL-STD-129 standards, though the specific gear assemblies are exempt from Unique Item Identification requirements.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 333998
New
Federal
12-GANG LOAD CENTER
Solicitation # 26Q7906PRESOLICITATION
DLA Weapons Support Puget Sound is seeking a firm-fixed-price supply contract for 20 12-gang load centers and 12 distribution boxes for welding units. This procurement, identified by solicitation number SPMYM226Q7906, is designated as a 100 percent small business set-aside and will utilize commercial and simplified acquisition procedures. The Non-Manufacturer Rule applies to this requirement, and the final delivery will be FOB Destination to Silverdale, Washington. The solicitation is expected to be posted on SAM.gov around September 14, 2025. Interested contractors must monitor the site for amendments and submit any inquiries in writing via email. Additionally, awardees required to implement NIST SP 800-171 must provide a current assessment as detailed in DFARS 252.204-7019 to be considered for the award.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
Federal
SHORE POWER CABLE
Solicitation # 26Q0217PRESOLICITATION
DLA Weapons Support Puget Sound is seeking a firm-fixed-price contract for the procurement of shore power cables. The requirement includes two 150-foot DLO 3/0 cables with specific AX8982 and Russell Stoll connectors, eight 150-foot cables, and four 220-foot cables, all terminated with M24368/5 and M24368/1 plugs. The contract falls under NAICS code 335999 and PSC 5935, with delivery specified as FOB Destination to Silverdale, Washington. This opportunity is intended as a 100 percent small business set-aside and will be conducted using commercial and simplified acquisition procedures. The solicitation, numbered SPMYM226Q0217, is expected to be posted on SAM.gov around September 14, 2025. Eligible contractors must comply with the Non-Manufacture Rule and, if applicable, provide a current NIST SP 800-171 assessment as required by DFARS 252.204-7019.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 332212
Federal
Supply of Setting Rings (2.4" and Other Sizes)This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, requires the supply of 14 precision setting rings designed for the calibration and verification of TESA/Brown & Sharpe internal micrometers. The order specifically includes a 2.4 inch ring and requires all units to be compatible with the 599-281 series system while providing certified dimensional accuracy. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance for this requirement will take place in Bremerton, Washington, with the solicitation posted on August 10, 2026.
Hand and Edge Tool Manufacturing

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 332212
Federal
Supply of TESA/Brown & Sharpe Intrimik Internal Micrometers (0.7"–7.0")This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, involves the procurement of 29 TESA/Brown & Sharpe Intrimik precision internal micrometers. These analog tools, ranging from 0.7 to 7.0 inches, are designed under the ABBE principle to ensure high-accuracy measurements and will serve as direct replacements for existing 599-281 series tools within PSNS toolrooms and calibration laboratories. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance of the contract will take place in Bremerton, Washington, with the official posting date set for August 10, 2026.
Hand and Edge Tool Manufacturing

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 811212
Federal
Warranty, Maintenance & Repair ServicesThis contract provides comprehensive post-delivery technical support, preventive maintenance, and repair services specifically for HandyScan 3D scanning units operated in industrial environments. The services are designed to ensure uninterrupted performance and longevity of the equipment, with all work performed in accordance with industry standards and under the oversight of the Department of Defense through DLA Maritime - Puget Sound. The scope encompasses proactive maintenance measures to prevent system failures, timely repairs to restore functionality, and responsive technical assistance tailored to the high-demand conditions of industrial use. The contract is structured as a small business set-aside under the SBA program, with the NAICS code 811212 indicating it pertains to electronic and precision equipment repair and maintenance. Performance is required at the designated location in Bremerton, Washington, with a zip code of 98314. Although the solicitation number and point of contact are not provided, the contract was posted on July 1, 2026, and is classified as a subcontract under federal procurement regulations. All work must comply with federal standards and be executed by a qualified small business entity to meet the set-aside requirement.
Computer and Office Machine Repair and Maintenance

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 238990
Federal
On-Site Installation & System Integration ServicesThe contract entails on-site installation, calibration, and full integration of advanced 3D scanning systems with existing software and hardware infrastructure at the Puget Sound Naval Shipyard in Bremerton, Washington, with a zip code of 98314. The work involves ensuring seamless compatibility between the new scanning technology and current military-grade systems, requiring specialized technical expertise to support naval operations and maintenance workflows. All services must be performed directly at the facility, with no remote or off-site alternatives permitted. This is a subcontract awarded under a Total Small Business Set-Aside classification per FAR 19.5, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 238990 applies to other specialized construction services. The contract is managed by DLA Maritime under the Department of Defense and was posted on July 1, 2026, with performance expected to occur at the shipyard location. The nature of the work demands compliance with federal defense standards, secure handling of proprietary systems, and coordination with shipyard personnel to minimize operational disruptions during implementation.
All Other Specialty Trade Contractors

POSTED

2 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS