Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RING, RETAINING

Active
SPE4A6-26-T-15DUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of nine retaining rings under NSN 5325-01-223-6971. The contract specifies a delivery timeline of 57 days after order and identifies Elliott B W Mfg Co Inc in Binghamton, NY, as a relevant entity. Performance is designated for New Cumberland, PA, with the solicitation period running from August 11, 2026, to August 19, 2026. The agreement mandates strict adherence to DLA packaging and technical requirements, including the removal of government identification from any non-accepted supplies. Environmental safety is a priority, as the contract explicitly prohibits the use of asbestos and the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components as defined by NAVSEA.

General Info

DoD procurement of nine retaining rings from Elliott B W Mfg Co Inc.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-15DU.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Derrick Looney
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RING,RETAINING
RETAINER,PACKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ELLIOTT B W MFG CO INC
BINGHAMTON NY
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 5325-01-223-6971 Quantity: 9 EA Purchase Request: 7017838897QTY: 9 Delivery: 57 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
ADAPTER BUSHING
Solicitation # SPE7M0-26-T-038B
This contract, identified as SPE7M0-26-T-038B, is for the procurement of one adapter bushing with NSN 4730015394064 and part number 10009-5 from Panova Inc. The order is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys. Delivery is required within five days after the order, with a required delivery date of August 10, 2026. The shipment is designated as an NMCS priority and is to be delivered FOB Origin to the USALRCTR Bavaria in Vilseck, Germany. The supplier must adhere to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Inspection and acceptance will take place at the destination.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
ADAPTER, STRAIGHT, HO
Solicitation # SPE7M0-26-T-037Z
This contract is for the procurement of one straight adapter for a hose to gas fitting, identified by NSN 4730015663906 and CNH Industrial America LLC part number 87570215. The order is managed under solicitation number SPE7M0-26-T-037Z by the Department of Defense Maritime Supply Chain ESOC Buys. Delivery is required within five days after receipt of order, with a required delivery date of August 10, 2026. The agreement specifies that shipping is FOB Origin, while inspection and acceptance will occur at the destination. The item must be delivered to the AWCF SSF at Fort Buchanan. Compliance with DLA packaging requirements RP001 and marking standards MIL-STD-129 is mandatory. Additionally, the contract incorporates technical and quality requirements defined in the DLA Master List and mandates the removal of government identification from any non-accepted supplies.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-8179
This contract is a solicitation from the Department of Defense Fluid Handling Division for the procurement of straight pipe-to-tube adapters made of brass. The specific hardware features a 3/4 inch OD tube male end and a 3/4 inch -14 threaded male pipe end, with compatible part numbers from Danfoss Power Solutions and Parker-Hannifin Corporation. The requirement consists of two separate line items, each for one unit under NSN 4730002784605, with a required delivery date of August 7, 2026. Delivery is set for 20 days after receipt of order, with the destination being the USS John P Murtha (LPD 26). The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, as well as DLA packaging requirements. Shipping must be conducted via the fastest traceable means, specifically prohibiting the use of parcel post. Inspection and acceptance will occur at the destination.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
VALVE, SWIVEL ROTOLK
Solicitation # SPE7MC-26-T-162A
The contract is for the procurement of 12 units of a swivel valve, part number 204480025, identified by NSN 4820-01-585-8486, under solicitation SPE7MC-26-T-162A. The item must be delivered FOB origin within 196 days of contract award, with no variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and strictly adhere to MIL-STD-129 labeling and marking requirements, with all DLA Master List of Technical and Quality Requirements taking precedence. Unit of issue is each,单价 is $12.00, totaling $144.00. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, and the required ship date is February 23, 2027. Transportation guidelines are governed by DLAD Proc Note C19 for general transport and C20 for first destination. The contract references specific DLA packaging and quality standards, and all technical and quality requirements are sourced from the DLA Master List. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and the contracting office is under the Department of Defense, with Paula McClary as the primary point of contact.
SAN DIEGO

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-189R
This contract is a solicitation by the Defense Logistics Agency for the procurement of ball valves, identified by NSN 4810200048150. The requirement consists of two separate line items, each for one unit, to be delivered to the USS America (LHA 6) and the USS Tripoli (LHA 7). The delivery timeframe is specified as 20 days after the order, with an original required delivery date of August 6, 2026. The contract mandates strict adherence to DLA packaging requirements (RP001), MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions approved by NAVSEA. This is a total small business set-aside under NAICS code 332919, with FOB destination shipping and inspection points.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
NIPPLE, TUBE
Solicitation # SPE7M0-26-T-038A
This contract is a solicitation issued by the Department of Defense Maritime Supply Chain ESOC Buys for the procurement of one tube nipple, identified by NSN 4730-01-470-9325 and Parker-Hannifin Corporation part number 16F42EDMXS. The order specifies a delivery timeframe of five days after order, with a required delivery date of August 11, 2026. Shipping is designated as FOB Origin and must be sent via the fastest traceable means to the DLA LMP Zone 1 facility in Texarkana, Texas. The procurement is subject to strict technical and quality requirements as outlined in the DLA Master List, including specific packaging standards under ASTM D3951 and labeling requirements per MIL-STD-129. Inspection and acceptance will occur at the destination. The contract mandates a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-26-T-7789
The contract solicitation SPE7M3-26-T-7789 requires the supply of 228 units of CLAMP, HOSE with NSN 4730-01-601-4874 at a unit price of $228.00, resulting in a total contract value of $51,984. Delivery is to be made FOB origin within 112 days from the award date, with inspection and acceptance occurring at the destination. The quantity must be delivered exactly as specified with zero variance allowed. All items must be packaged in compliance with ASTM D3951 and labeled according to MIL-STD-129, with precedence given to the DLA Master List of Technical and Quality Requirements over ASTM standards. Packaging must adhere to DLA Packaging Requirements and palletization must follow RP001 guidelines. The unit of issue is each (EA), and the quantity per unit pack is specified as 001. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with the original required ship date set for December 1, 2026. Transportation and shipping procedures must comply with DLAD Proc Notes C19 and C20. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Fluid Handling Division, with William Cain listed as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
DIBBS
ADAPTER
Solicitation # SPE7M0-26-T-037U
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-3280
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
DIBBS
ADAPTER, STRAIGHT, FL
Solicitation # SPE7M2-26-T-5892
The contract is for the procurement of six straight fluid adapters with part number CMC-8-5150-64-64 and NSN 4730-01-441-9055 under solicitation SPE7M2-26-T-5892, with a unit price of $6.00 per unit and a total value of $36.00. Delivery is required in 168 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, packaged in unit containers of 10, using specific cushioning and packaging materials with no special marking required. Mercury and mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses in batteries, lighting, sensors, weapon systems, or chemical reagents specified by NAVSEA, and any portable devices containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the item must be shipped no later than January 26, 2027, with the original delivery due by February 7, 2027. Technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The contract is issued under the Department of Defense, managed by the Nuclear Reactor Program, with David Larsen as the primary point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
Federal
48--VALVE ASSEMBLY, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBA56
NAVSUP Weapon Systems Support Philadelphia intends to award a sole source contract to Pacific Propeller International for the repair of four valve assemblies for C130 aircraft. As the Original Equipment Manufacturer and the only known source with the necessary data and rights for this repair, Pacific Propeller International is the designated provider under the authority of 10 U.S.C. 2304(c)(1). The procurement follows FAR Part 15 procedures and includes requirements for Unique Identification and compliance with Buy American clauses. The contract will have a duration of one year with delivery terms set as FOB Origin. While the government is pursuing a sole source award, it will consider capability statements or proposals from other responsible sources within 45 days of the notice. The solicitation is expected to be issued around August 25, 2026, with a closing date of September 24, 2026, and an anticipated award date in October 2026.
Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,CHECK
Solicitation # SPRMM126QKG80
This contract is issued under solicitation SPRMM126QKG80 by the Department of Defense through DLA Mechanicsburg for the procurement of a CHECK VALVE with the CAGE code 54497 and reference number 1213C2817. The contract mandates strict adherence to military and industry quality standards including MIL-STD-130 Rev N for marking, IPC J-STD-001 Class 3 for soldering, and MIL-STD-2073 for packaging. Inspection and acceptance of the material must occur at the source as defined by DLA Procurement Note E06, with final acceptance of packaging also to be conducted at a designated location to be specified. All deliveries require electronic submission of invoices and receiving reports via PIEE-WAWF, and contractors must be registered in the Procurement Integrated Enterprise Environment and comply with mandatory use of Workflow Pro. Compliance with higher-level quality requirements is enforced through ISO 9001, and the evaluation for award is strictly based on Lowest Price Technically Acceptable criteria. The contractor must be an authorized distributor of the original equipment manufacturer, subject to providing documentation on company letterhead signed by an authorized official. Any change to design, material, part number, or production facility requires prior written approval from the Contracting Officer, with specific codes indicating the nature of the change and a mandatory $250 administrative cost reduction for facility changes. Records of all inspections must be maintained for 365 days after final delivery, and non-compliant or defective materials are not acceptable even under sampling protocols. Technical documentation and specifications referenced in the contract must be obtained from authorized sources, with additional controls on distribution and access due to official use and NOFORN designations. The solicitation response deadline is August 31, 2026, and communication must be routed through the designated point of contact. Contractors are also encouraged to register with NAVSUP WSS to receive automated notifications regarding contract issuance and updates.
SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

in 20 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541620
New
DIBBS
Hazardous Materials Handling & Labeling Support
Environmental Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541611
New
DIBBS
Defense Telecommunications Equipment Compliance & Reporting
Administrative Management and General Management Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335931
New
DIBBS
Power Cable Assembly Supply (NSN: 6150-01-620-2687)
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling Support
Other Scientific and Technical Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Blind Rivet Manufacturing and Supply
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-15KX
This contract is for the procurement of 26 machine screws, identified by NSN 5305009399256 and part number MS35275-251. The items must be manufactured in accordance with the current revision of the NASM35275 standard and are classified as critical application items. Delivery is required within 171 days, with a final required delivery date of March 24, 2027, shipped FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to quality and technical requirements, including MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging processes.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334412
New
DIBBS
PRINTED CIRCUIT BOA
Solicitation # SPE4A6-26-T-14ZK
This contract is for the procurement of 10 units of the Modulator PCB Assembly 25KW, identified by part number 65825812 and NSN 5998015258671. Manufactured by Northrop Grumman Systems Corporation, this critical application item is an electrostatic sensitive device used in X-Band training units. The delivery is set for 171 days after order, with a required delivery date of June 25, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to cybersecurity and safety standards, including CMMC Level 2 self-assessment and the application of covered defense information. It prohibits the intentional addition of mercury or mercury-containing compounds. Due to the sensitive nature of the electronics, the supplier must utilize DOD-qualified ESD and EMI protective packaging materials in accordance with MIL-PRF-81705 and MIL-STD-129 to prevent damage to leads and terminals during transit.
Bare Printed Circuit Board Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRU
Solicitation # SPE4A6-26-T-15EQ
This contract is for the procurement of eight thrust washer bearings, identified by NSN 3120013980360 and part number 04104007 from Flowserve US Inc. The agreement specifies a delivery timeframe of 171 days with a required ship date of February 7, 2027, and an original required delivery date of January 3, 2028. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the origin. The contract adheres to strict technical and quality standards, including DLA packaging requirements and MIL-STD-129 marking. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions. The items are designated as critical application items and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-15CW
This contract is for the procurement of 209 shoulder screws, identified by NSN 5305-01-179-7460 and Avibank Mfg. Inc. part number 18-53301. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 171 days after order, with an original required delivery date of December 6, 2026, and a need ship date of February 7, 2027. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Inspection and acceptance will occur at the point of origin, and the contract specifies a zero percent quantity variance for the order.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-15EL
This contract is a solicitation for the procurement of 62 headless straight pins, identified by NSN 5315-01-303-2962 and part number 6532B384-4 from Indal Technologies Inc. The delivery timeline is set for 171 days after order. The acquisition is managed by the Department of Defense ASC Commodities Division and must adhere to specific DLA technical and quality requirements, including strict packaging and marking standards. The items must meet NAVAIR aircraft launch and recovery equipment traceability requirements, with bare item markings consisting of the contract number, NAWC CAGE, and part number. Quality assurance will be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, TUBULAR
Solicitation # SPE4A6-26-T-15KB
This solicitation from the ASC Commodities Division of the Department of Defense is for the procurement of 2,526 tubular rivets under part number 5320-01-333-9936. The contract requires delivery within 240 days after receipt of order and is categorized under NAICS code 332510. Performance is designated for Tracy, California. Strict compliance with DLA packaging requirements and export control regulations is mandatory. Because the technical data is subject to ITAR or EAR restrictions, access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed export control training. All technical data disclosure must be authorized by the Department of State or Department of Commerce in accordance with DFARS 252.225-7048.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details