Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RING, RETAINING

Active
SPE4A1-26-T-2437Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 2,296 retaining rings with NSN 5325-01-280-5784 under solicitation SPE4A1-26-T-2437, issued by the Defense Logistics Agency’s Aviation Supply Chain. Delivery is required within 164 days after award, and the item is subject to stringent technical, quality, and cybersecurity requirements including CMMC Level 2 certification for the supplier and adherence to the DLA Master List of Technical and Quality Requirements identified by R and I numbers. All items must comply with DLA packaging standards, and government identification must be removed from non-accepted supplies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The product involves export-controlled technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, with DFARS 252.225-7048 fully applicable. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and explicit authorization from DLA. The contract is classified as a federal solicitation under NAICS code 332722 with Hill AFB as the place of performance and Jade Stringfield as the primary point of contact.

General Info

Procure 2,296 retaining rings with CMMC Level 2, ITAR/EAR controls, zero defects, DLA standards, and US/Canada certification required.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE4A1-26-T-2437.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Jade Stringfield
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RING,RETAINING
RING,RETAINING
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
SPE4A1-26-T-2437
SECTION B
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5325-01-280-5784 Quantity: 2,296 EA Purchase Request: 7017486624QTY: 2296 Delivery: 164 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEADThe contract pertains to the procurement of six hexagon head cap screws, identified by part number 284591-0001 and NSN 5305-01-479-0793, sourced from Marotta Controls Inc. All supplied hardware must strictly comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on acquisition scale. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking required. The items are to be delivered FOB origin to the designated receiving warehouse in Tracy, California, with a delivery window of 171 days from contract issuance, and no variance in quantity is permitted. Inspection and acceptance occur at the destination point. The contract explicitly prohibits the intentional use of mercury or mercury-containing compounds in any part of the hardware, packaging, preservation, or marking, with limited exceptions for functional uses in specific devices such as batteries, fluorescent lamps, sensors, or weapon systems, provided those items meet additional containment standards per NAVSEA 5100-003D. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed in the sample lot, unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The solicitation number is SPE4A6-26-T-05YY, with a response deadline of July 22, 2026, and the primary point of contact is Monica Greene of the ASC Commodities Division. The original required delivery date was November 4, 2026, but the contract specifies a need ship date of January 10, 2027, aligning with the extended delivery timeframe.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD, WELDINGThe contract is for the procurement of 67 welding studs identified by NSN 5307-01-722-3387 under solicitation SPE4A6-26-T-06EL, with a required delivery within 171 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions. The item is subject to Defense Logistics Agency packaging standards and requires removal of government identification from non-accepted supplies. Physical marking of the bare item is mandatory, though Item Unique Identification is not required based on service customer direction. Export control regulations apply to associated technical data, which is subject to either ITAR or EAR and may not be disclosed to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and formal DLA approval. The delivery location is Tracy, California, 95304-5000, with the contracting office under the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 14, 2026, with responses due by July 22, 2026, and the point of contact is Jeremy Stokes, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThis contract specifies the procurement of a close tolerance screw with NSN 5305-01-483-4778 and part number 120-225V08-08, designated as a critical application item for Bell Textron Inc. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Manufacturing may require casting or forging, and bidders must submit a Casting and Forging Assistance Request if they lack the necessary tooling or materials. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned strict verification levels or AQLs. Configuration changes require formal engineering change proposals or variance requests, and all supplies must adhere to DLA packaging requirements per RP001 and MIL-STD-2073-1E with marking compliant to MIL-STD-129 and no special marking codes applied. Unit of issue is each, with a fixed quantity of 15 units, no variance allowed, and delivery is FOB origin with inspection and acceptance occurring at destination. The item must be delivered within 171 days of the contract award, with the required delivery date set for January 10, 2028, and the need ship date listed as January 10, 2027. Packaging is to be palletized per DLA guidelines and shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, following transportation protocols outlined in DLAD Proc Notes C19 and C20. Government identification is not required on non-accepted supplies per RQ011, and Item Unique Identification is waived per DFARS 252.211-7003.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEADThe item specified is a screw, cap, hexagon head with NSN/part number 5305-01-483-6499, with a quantity of 18 units required under purchase request 7017486563. Delivery is due in 171 days after the award date. The solicitation, issued by the ASC Commodities Division under the Department of Defense, has the number SPE4A6-26-T-06CN, was posted on July 14, 2026, and requires responses by July 22, 2026. The contract falls under NAICS code 332722 and is categorized as a federal procurement with performance at New Cumberland, Pennsylvania, zip 17070-5002. Primary point of contact is Antonia Willcox, reachable via email and phone provided. This item is associated with technical data subject to U.S. export control regulations under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, constitutes an export requiring prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, restricting access to contractors who hold valid U.S./Canada Joint Certification Program certification, have completed required DOD export-controlled data training and the DLA questionnaire, and have received explicit approval from the DLA controlling authority. Access is limited to qualified DLA contractors meeting all stated compliance conditions.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXTEN
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details