Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RING, RETAINING

Active
SPE4A6-26-T-26CVFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation from the ASC Commodities Division of the Department of Defense is for the procurement of one retaining ring, identified by NSN 5325-01-366-3320 and part number SSCY7958-3. The contract requires delivery within 20 days after the order is received and specifies that the item must be identified according to MIL-STD-130N. The supplier must adhere to DLA packaging requirements and technical quality standards found in the DLA Master List. Quality assurance and sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific AQLs assigned for critical, major, and minor attributes. The solicitation was posted on September 2, 2026, with a response deadline of September 10, 2026.

General Info

DoD procurement of one retaining ring, delivery within 20 days, deadline September 10.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-26CV.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Priscilla Holmes
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RING,RETAINING
RING, RETAINING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
STEIN SEAL CO (03673)
KULPSVILLE PA
P/N SSCY7958-3
IDENTIFY TO
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY ADEQUATE DATA FOR NSN/Part Number: 5325-01-366-3320 Quantity: 1 EA Purchase Request: 7018136705QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SPLIN
Solicitation # SPE4A6-26-T-26BX
This contract is for the procurement of 5,359 self-locking spline nuts under NSN 5310010540004. The items are identified as commercial products, with specific part numbers associated with Huck International, Inc. and Fastener Technology Corp. Delivery is required within 46 days after the order, with a final required delivery date of May 28, 2027, shipping FOB Origin to the DLA Distribution Depot at Hill AFB, Utah. Compliance requirements include CMMC Level 2 self-assessment and adherence to Covered Defense Information standards. Quality control must follow MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with ASTM D3951 and MIL-STD-129. The contract is designated as a HUBZone set-aside under NAICS code 332722 and is managed by the Department of Defense ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-26BW
This contract is for the procurement of 164 close tolerance screws, identified by NSN 5305-01-539-5971. The order is designated as a critical application item and lists several approved manufacturers and part numbers, including those from Fastener Innovation Technology, The Boeing Company, and Howmet Global Fastening Systems. Delivery is required within 171 days, with a need date of March 1, 2027, and shipment is to be delivered FOB origin to DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Quality assurance involves inspection and acceptance at the origin, with a zero percent quantity variance allowed. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements for procurement.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-U-3414
This contract is for the procurement of 473 socket head cap screws made from a nickel copper alloy, specifically 0.050-13UNC-3A x 1.000 inch. The items are identified as critical application commercial items and must conform to the current revision of the applicable part standards and technical data package. Dimensional conformance for class 3A and 3B threads must be inspected according to System 22 of FED-STD-H28/20. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-130N for identification marking. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware or packaging. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331, with a required Certificate of Quality Compliance. Delivery is set for 92 days after order, with inspection and acceptance occurring at the destination.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-U-3429
This contract is for the procurement of 155 blind rivets, identified by NSN 5320009572507 and part number MS20604AD6W4. The items must be manufactured according to the current revision of the NASM20604 part standard. This is a critical application item with a delivery requirement of 48 days after the order is placed, with shipping and acceptance occurring at the destination. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract is issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-U-3429.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-T-26CP
This contract is for the procurement of 250 close tolerance screws, identified as NSN 5305010590216 and part number NAS1580V3T3. The items are classified as critical application commercial items and must be manufactured according to the current revision of the applicable part standards, including NAS1580 and NAS621. Quality assurance requires critical item source inspection, with gauging for Class 3A and 3B threads performed per FED-STD-H28/20. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Delivery is set for 5 days after the order, with FOB origin and inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E and RP001, specifically requiring that each fastener's shank and threads be protected by a wrap or sleeve. Marking must adhere to MIL-STD-130N and MIL-STD-129. The shipment is destined for the 2 Inci Hava Bakim Fabrika Mudurlugu in Kayseri, Turkey, via A.J. Worldwide Services.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-26BD
This contract is a solicitation for the procurement of 126 machine screws under NSN 5305-01-696-4069 for the Department of Defense ASC Commodities Division. The delivery requirement is set for 42 days after receipt of order. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods according to MIL-STD-1916 or ASQ H1331, with specific verification levels for critical, major, and minor attributes. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DOD training to access technical data.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-25ZA
This contract is a solicitation for the procurement of 3,799 plain hexagon nuts under NSN 5310-00-282-5658. Issued by the Department of Defense ASC Commodities Division, the requirement specifies a delivery timeline of 171 days after the order is placed. The item is classified as a commercial product and must adhere to specific DLA packaging, marking, and documentation requirements, including the removal of government identification from non-accepted supplies. Quality assurance is governed by strict sampling methods according to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Additionally, the contract mandates a strict prohibition on the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Technical and quality requirements are further detailed in the DLA Master List, with the applicable revision determined by the solicitation or award date.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-U-3389
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-U-3389, is for the procurement of 850 threaded pin-rivets identified by NSN 5320-00-438-5641. The contract is a total small business set-aside under NAICS code 332722, with a required delivery timeframe of 175 days after receipt of order. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. Access to this data is limited to DLA contractors with approved US/Canada Joint Certification Program certification and completed mandatory export-control training. Additionally, all deliveries must adhere to DLA packaging requirements specified in RP001.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3408
This contract is for the procurement of 1,919 machine bolts, identified by NSN 5306006162618 and part number AN5-12A. The items are classified as commercial critical application items and must adhere to specific technical and quality standards, including dimensional conformance for Class 3A and 3B threads per FED-STD-H28/20. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a requirement for zero non-conformances in sample lots. The delivery timeline is set for 322 days after the order, with shipping handled FOB Origin and inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. While the items must meet current part standards, Item Unique Identification is not required for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-26BZ
This contract is for the procurement of 45 retaining pins under solicitation number SPE4A6-26-T-26BZ for the Department of Defense ASC Commodities Division. The delivery requirement is set for 149 days after the order is placed. The procurement is subject to specific technical and quality requirements, including DLA packaging standards, source approval request documentation, and the protection of covered defense information. Quality assurance is governed by strict sampling methods, primarily MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. The contract mandates that mercury or mercury-containing compounds must not be intentionally added to the hardware, with limited exceptions for specific functional components. All supplies must adhere to the DLA Master List of Technical and Quality Requirements based on the solicitation or award date.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-U-3357
This contract is for the procurement of 232 shear bolts designated as special high strength fasteners to support the Department of Defense aviation community. The items must be manufactured, tested, and inspected according to the current revision of the applicable military or consensus non-government part standards. Delivery is required within 106 days after receipt of the order. The agreement includes strict quality and technical requirements, including specific sampling methods based on MIL-STD-1916 or ASQ H1331 and the submission of a Certificate of Quality Compliance. Key mandates include the prohibition of intentionally added mercury and adherence to DLA packaging and physical identification standards. While physical marking is required, Item Unique Identification is not necessary for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, ASSEMBLED
Solicitation # SPEA46-26-T-15CB
This contract is for the procurement of 500 assembled plain nuts, identified by NSN 5310-01-694-9017 and part number 1034809-001. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-15CB. Delivery is required within five days, with the original required delivery date set for August 6, 2026. The items are to be delivered FOB Origin, with inspection and acceptance occurring at the destination in Tobyhanna, Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for physical identification, configuration change management, and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance unless otherwise specified.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-26BF
This contract is for the procurement of blind rivets, specifically part number NAS1921B05-03 under NSN 5320001652084. The total quantity requested is 14,171 units, split between two delivery locations: 4,121 units to DLA Distribution San Diego and 10,050 units to DLA Distribution Warner Robins. The items are classified as critical application hardware and must be manufactured according to the current revision of the applicable military or non-government part standards. Delivery is required within 99 days, with specific need ship dates in May and July 2026 and a final required delivery date of March 2, 2027. Inspection and acceptance will occur at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements. Quality assurance and sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, SPRING
Solicitation # SPE4A6-26-U-3352
This contract is for the procurement of 1,117 spring pins, identified by NSN 5315-00-004-3134 and part number NAS561S3-12. The requirement is a total small business set-aside under NAICS code 332510, with delivery expected within 71 days after the order. The items are designated as critical application items and must adhere to technical standards NAS561 and NASM10971. The agreement mandates strict quality and sampling protocols following MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and the use of mercury or mercury-containing compounds is strictly prohibited. All marking must be performed in accordance with MIL-STD-129.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-26AF
This contract is for the procurement of 20 feet of electrical insulation sleeving, identified as NSN 5970-00-063-1495 and part number M23053/1-103-0. The item is classified as a commercial critical application item and must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturers List or Qualified Products List. It has a 12-month extendable shelf life and must adhere to SAE AS23053/1 standards. The agreement specifies a delivery timeframe of 20 days and requires compliance with DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed via destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-25ZJ
This contract is for the procurement of 6,977 blind rivets, identified as a critical application commercial item under NSN 5320010903166. The items must be manufactured in accordance with the current revisions of non-government standards NAS9305 and NAS1686. Quality assurance requires sampling based on MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. The delivery is set for 171 days after order, with a required delivery date of April 5, 2027, shipping FOB Origin to DLA Distribution Cherry Point in North Carolina. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The contract incorporates the DLA Master List of Technical and Quality Requirements and specifies a zero percent quantity variance.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING HALF SET, SLEEV
Solicitation # SPE4A6-26-T-25ZB
This contract is for the procurement of 619 units of bearing half sets, sleeve, identified by NSN 3120-00-843-6994. The unit of issue is defined as two half sleeves per each unit. The delivery is required within 171 days, with a need ship date of March 1, 2027, and delivery is set as FOB Origin with inspection and acceptance occurring at the destination. The items are to be shipped to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to several technical and quality requirements, including DLA packaging standards, MIL-STD-129 marking, and the prohibition of mercury or mercury-containing compounds in the hardware and packaging. It specifies that each sleeve must be wrapped in neutral paper to prevent damage. The items are designated as critical application items and must comply with specific part numbers from approved manufacturers such as Oshkosh Defense, Rolls-Royce Solutions America, Penske Power Systems, and Federal-Mogul Corporation.
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-26AK
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of four straight, headless steel pins measuring 1.25 inches in length and 0.5 inches in diameter. Identified by NSN 5315-00-058-9956, the items are being procured under a fully competitive process in accordance with military and federal specifications. Delivery is required within 20 days after the order is placed. The contract is subject to several technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. It also notes that covered defense information potentially applies to this acquisition. Interested parties must respond by September 10, 2026, under solicitation number SPE4A6-26-T-26AK.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
RETAINER, TURNLOCK F
Solicitation # SPE4A6-26-T-26AZ
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 13 turnlock fastener ejector spring retainers, identified by NSN 5325-00-291-9360. The contract requires delivery within 256 days after order and is categorized under NAICS code 332119. Performance is designated for New Cumberland, Pennsylvania. The agreement includes stringent security and quality mandates, including CMMC Level 2 certification for third-party assessment and compliance with ITAR and EAR export controls. Contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD training to access technical data. Additionally, the contract adheres to DLA packaging requirements, physical identification marking, and specific higher level quality requirements as outlined in the DLA master list.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3393
This contract is for the procurement of 238 machine bolts, identified by NSN 5306006379158 and part number AN101127. The items are classified as critical application commercial items and must be manufactured according to the current revision of the applicable part standards, specifically referencing non-government standards AN101101 through AN101200 and SAE AS7452. Delivery is required within 15 days after the order, with FOB, inspection, and acceptance all occurring at the point of origin. The supplier must adhere to strict quality and technical requirements, including SAE AS9100 for manufacturers and specific gauging requirements for Class 3A and 3B threads per FED-STD-H28/20. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Sampling for acceptance will be conducted according to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for sample lots unless otherwise specified.
Nonferrous Forging

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-26BU
This solicitation is for the procurement of 20 blind rivets under contract number SPE4A6-26-T-26BU for the Department of Defense ASC Commodities Division. The items are identified as critical application commercial hardware and must adhere to non-government standards NAS1674 and NAS1675. All hardware manufactured from the date of solicitation must comply with the current revision of these part standards. The contract mandates strict quality and sampling protocols, requiring adherence to MIL-STD-1916 or ASQ H1331 with a zero-based sampling plan. Delivery is required within five days after receipt of order, with inspection and acceptance occurring at the origin. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details