Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RING, WEARING

Active
SPE4A5-26-T-324RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of four wearable rings identified by NSN 2935-01-507-5730 and part number 764297 from Hamilton Sundstrand Corporation under solicitation SPE4A5-26-T-324R. The item is classified as a commercial item and is subject to comprehensive technical, quality, and packaging requirements referenced from the DLA Master List of Technical and Quality Requirements. The supplier must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking needed. Unit of issue is each, with a fixed quantity of four units, and delivery is FOB origin with a 171-day lead time to be completed by October 27, 2027. Final inspection and acceptance occur at the destination, specifically the DLA Distribution Depot in Tinker AFB, Oklahoma, and no quantity variance is permitted. Item Unique Identification is waived per customer request, and configuration change management, deviation requests, and removal of government identification from non-accepted supplies are strictly governed by specified quality clauses. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stated, and measuring and test equipment must meet defined standards. The supplier must also maintain CMMC Level 2 self-assessment compliance and adhere to physical item marking requirements. All shipments must align with DLA transport procedures and arrive no later than January 31, 2027.

General Info

Procure four wearable rings, NSN 2935-01-507-5730, FOB origin, delivery by October 27, 2027, per DLA standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-324R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Anthony Nickens
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RING,WEARING
RING, WEARING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
HAMILTON SUNDSTRAND CORPORATION 99167 P/N 764297
SPE4A5-26-T-324R
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741316 0001 EA 4.000
NSN/MATERIAL:2935015075730
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/31/2027
SPE4A5-26-T-324R
SECTION B
PR: 7017741316 PRLI: 0001 CONT’D
Original Required Delivery Date:10/27/2027
SPE4A5-26-T-324R NSN/Part Number: 2935-01-507-5730 Quantity: 4 EA Purchase Request: 7017741316QTY: 4 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
CORE ASSY BOND, SPEC
Solicitation # SPE4A7-26-T-612N
The contract seeks the procurement of 20 units of CORE ASSY BOND,SPEC with NSN 2995015940126, to be delivered to W1A8 DLA DISTRIBUTION within 171 days after award. Only two approved sources are listed for this item, identified by the part numbers LM-200-158 under vendors 76005 and 98897. The solicitation is issued as an RFQ through SAM. gov under number SPE4A7726T612N and is strictly electronic; no hard copies are available, and no specifications, plans, or drawings are provided. All responsible suppliers may submit quotes, provided they are received electronically by the deadline of August 12, 2026. The opportunity is open without set-aside restrictions, and responses must be submitted via the online portal. The contracting office is the DLA Aviation based in Richmond, Virginia, with inquiries to be directed to the designated point of contact via email. The NAICS code 336412 indicates this procurement relates to aerospace product and parts manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
SCREW, LOCK PLATE
Solicitation # SPE4A6-26-T-12CK
The contract is for the procurement of 22 screw, lock plate items with NSN 5305-01-626-3828 under solicitation SPE4A6-26-T-12CK, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days after award, and responses must be submitted by August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. Items must be physically marked in accordance with RQ017, ensuring identification even when bare. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Export control restrictions under ITAR or EAR apply to associated technical data, requiring prior government authorization for any disclosure or export, including to foreign nationals within the U.S. Only contractors with approved U.S./Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access the controlled data, in compliance with DFARS 252.225-7048.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
INSULATION BLANKET, THE
Solicitation # SPE4A7-26-T-613V
The contract pertains to the procurement of one thermal insulation blanket, specifically designed for aircraft gas applications, identified by NSN 2840-99-842-9242 and part number 99A9266M. The item is supplied by DEALER DISTRIBUTOR for CAGE K0510, SEAL DYNAMICS, and DARCHEM ENGINEERING LTD, with delivery required within 171 days of contract award, originally scheduled for October 15, 2026, and a firm ship date of January 31, 2027. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must comply strictly with MIL-STD-2073-1E, including specific preservation methods, unit packaging, and intermediate container specifications, while marking adheres to MIL-STD-129 without special codes. Palletization follows DLA’s packaging requirements, and the final delivery destination is the DLA Distribution Center at New Cumberland, Pennsylvania. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions determined by acquisition type and solicitation amendments. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively. The unit of issue is each (EA), and the contract falls under the DoD authorized procurement framework. Removal of government identification from non-accepted items is mandated, and transportation logistics adhere to DLA Procurement Notes C19 and C20. No item unique identification is required, as per DFARS 252.211-7003(c)(1)(i).
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
DISK, VALVE
Solicitation # SPE4A5-26-T-323M
The contract is for the procurement of 10 DISK, VALVE units identified by NSN 2915-01-234-0934 and Boeing part number 36-4770-503, with a unit price of $10.00 and a total contract value of $100.00. Delivery is required within 171 days after notice, with the required delivery date set for July 29, 2028 and a need ship date of January 31, 2027. The item must be delivered FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 standards, and palletization must follow DLA’s RP001 packaging requirements. Technical and quality specifications referenced by R or I numbers from the DLA Master List of Requirements apply and supersede any conflicting standards. The item is not required to have Unique Item Identification, per DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance at CMMC Level 2 via self-assessment is mandatory, and removal of government identification from non-accepted supplies is required. All items must be marked in accordance with physical identification guidelines. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation was issued under contract number SPE4A5-26-T-323M, with a response deadline of August 12, 2026, and the NAICS code is 336412.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
PLATE, COMPONENT MOUNTI
Solicitation # SPE4A5-26-T-322Y
This contract pertains to the procurement of a component mounting plate for aircraft gas turbine systems, identified by NSN 2840-01-323-5646 and part number 23007075, with a quantity of two units to be delivered within 171 days under the solicitation SPE4A5-26-T-322Y. Delivery is FOB origin, and inspection and acceptance occur at the destination, with strict zero tolerance for quantity variance. Packaging must comply with MIL-STD-2073-1E, including specific preservative methods, wrap materials, and container codes, and marking must follow MIL-STD-129 without any special marking codes. Palletization adheres to DLA packaging requirements, and the shipment is addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces stringent quality and compliance standards, incorporating technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality provisions for manufacturers and non-manufacturers. Sampling follows MIL-STD-1916 or comparable zero-based plans with designated verification levels and AQLs for critical, major, and minor attributes; otherwise, unspecified attributes are treated as major. The supplier must implement configuration change management protocols and submit engineering change proposals or variance requests as required. Physical identification of parts must be clearly marked, and cybersecurity compliance is mandated at CMMC Level 2 through self-assessment. The item is classified as a critical application item, and all documentation, including transportation and freight instructions, aligns with DLA procedural notes and federal unit of issue standards. The delivery deadline is set for January 31, 2027, with an original required date of December 28, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
PLUG ASSEMBLY, CUTOF
Solicitation # SPE4A5-26-T-321E
The contract pertains to the procurement of a Plug Assembly, Cutof, identified by NSN 2915-00-675-0138 and part number 336764 from Honeywell International Inc, with a total quantity of seven units to be delivered FOB origin. The delivery is required within 171 days of the contract award, with inspection and acceptance occurring at the destination warehouse in Tracy, California. The item must be packaged in strict accordance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit and intermediate container specifications, and marked per MIL-STD-129 with no special markings required. Packaging must also comply with DLA's procurement requirements. Sampling and verification follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and attributes are to be classified with corresponding verification levels or AQLs. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. CMMC Level 2 self-assessment is mandatory, and physical identification of the bare item must be marked as required. Although Item Unique Identification is not mandated per the service customer’s request, DFARS 252.211-7003(c)(1)(i) applies. Measuring and test equipment used must meet RT001 requirements. The contract was solicited under SPE4A5-26-T-321E with a response deadline in August 2026 and the original required delivery date set for November 2027, though the need ship date is January 2027. All transportation logistics are subject to DLAD procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-Q-0953
The U.S. Department of Defense through DLA Aviation is soliciting quotes for one unit of NSN 2915007279944 VALVE, TRANSFER-SET under solicitation number SPE4A726Q0953, with a posted date of August 4, 2026, and a response deadline of August 19, 2026. The requirement is categorized under NAICS code 336412 and is open to all responsible sources without set-aside restrictions. Three delivery lines are specified: one unit to be delivered to DLA Distribution Cherry Point within 697 days after contract award, one unit to be delivered to location 0090 within 90 days, and another unit to be delivered to location 0547 within 547 days, each with a unit of issue of EA. Quotes may be submitted electronically and are expected to be received by the deadline to be considered. All inquiries must be directed via email to the designated point of contact, DibbsBSM@dla.mil, with additional solicitation details available through the provided SAM.gov link or the DIBBS portal using the solicitation number.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336412
New
DIBBS
PLATE, INDEX
Solicitation # SPE4A7-26-T-609G
The solicitation seeks quotes for six units of NSN 2915009188941, PLATE, INDEX, to be delivered to DLA DISTRIBUTION CHERRY POINT within 171 days after award. The procurement is conducted under solicitation number SPE4A726T609G, issued by the DLA Aviation office in Richmond, Virginia, and is classified as a combined action with no set-aside requirements. Only the approved source, 45934 545048, is designated for this item, though all responsible sources may submit quotes if received on time. The solicitation is exclusively electronic, with no hard copies available, and no technical specifications, plans, or drawings are provided. Quotes must be submitted electronically through the SAM.gov portal before the deadline of August 12, 2026, with the RFQ accessible via the provided link. For inquiries, all communications must be directed to the designated buyer email as referenced in the solicitation document, with additional guidance available through the DIBBS website using the solicitation number.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
PIPE INTAKE, TURBOSU
Solicitation # SPE4A7-26-T-612H
The contract pertains to the procurement of PIPE INTAKE, TURBOSU with NSN 2950-01-556-3044, issued under solicitation SPE4A7-26-T-612H by the Department of Defense through DLA. Two line items are specified: 10 units at $10 each and 21 units at $21 each, totaling 31 units, with a strict delivery timeline of 171 days from contract award and a required ship date of January 31, 2027, following an original delivery target of January 12, 2027. Delivery is FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 but is subordinate to the DLA Master List of Technical and Quality Requirements, which govern all technical and quality standards referenced by R or I numbers. Packaging and labeling are required to follow MIL-STD-129, with palletization adhering to RP001 DLA Packaging Requirements. Two distinct shipping addresses are designated—one for parcel post and freight in Tracy, California, and another for freight in Albany, Georgia—both tied to specific DLA distribution points. The unit of issue is each (EA), consistent with DoD authorization, and all documentation references DLA procedural notes for transportation logistics. The contract also includes the invocation of Product Verification Testing under DLA Clause 52.246-9004 at the procurement activity’s discretion, and removal of government identification from non-accepted supplies is mandated. The purchasing organization is the ASC SUPPLIER OPER AE AND AF DIV, with Sara Duran Campos as the primary contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
DUCT ASSEMBLY
Solicitation # SPE4A5-26-Q-0665
The U.S. Department of Defense through DLA Aviation is seeking quotes for a single Duct Assembly with NSN 2840011100713 under solicitation SPE4A526Q0665, which is a Small Business Set Aside for total contracting. The item is to be delivered by 129 days after award to W1A8 DLA District San Joaquin, with quotes due by August 6, 2026. Only approved sources, identified as 00198 3030059 and 98247 3030059, are eligible to respond, and submissions must be made electronically; hard copies are not available. No technical specifications, plans, or drawings are provided, and all responsible sources may submit a quote if received on time. The procurement is classified under NAICS code 336412, and the contracting office is located in Richmond, Virginia, with the primary point of contact for questions being the buyer listed in block 5 of the solicitation document, reachable via email at DibbsBSM@dla.mil. The solicitation can only be accessed online through the provided SAM.gov link, and bidders are instructed to navigate to DIBBS for further details if the link fails. The contract type is combined, and the requirement is specifically reserved for small businesses, with no additional set-aside subcategories specified.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336412
New
DIBBS
HOUSING, ANTIFRICTION B
Solicitation # SPE4A7-26-T-609B
The contract specifies the procurement of a housing for an antifriction bearing used in aircraft gas turbine engines, identified by NSN 2840-00-484-1445 and part number 3012828, with a quantity of 21 units. Delivery is required within 171 days FOB origin, with no variance allowed in quantity, and both inspection and acceptance are to occur at the manufacturer’s origin. The item must comply with MIL-STD-2073-1E packaging standards, including specific preservative methods, wrapping materials, and unit packaging, and all marking must adhere to MIL-STD-129 without special markings. The delivery destination is DLA Distribution Cherry Point in North Carolina. Technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue date or amendment dates for large acquisitions. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute verification levels are strictly defined. Measuring and test equipment must be calibrated and compliant, and the Canadian Commercial Corporation and Pratt & Whitney Canada Corp are listed as authorized sources. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i), and transportation logistics follow DLA procedural notes C19 and C20. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, under contract number SPE4A7-26-T-609B, and the original required delivery date is December 3, 2027, with a needed ship date of January 31, 2027.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
SHAFT, ECCENTRIC, TUR
Solicitation # SPE4A5-26-T-321A
The contract pertains to the procurement of five eccentric shafts, part number 195618 with NSN 2915-00-314-5937, manufactured by Honeywell International Inc, under solicitation SPE4A5-26-T-321A. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any conflicting standards. The item must be packaged in compliance with ASTM D3951, but DLA standards take precedence, and all packaging must be marked and labeled per MIL-STD-129 in accordance with RP001 packaging requirements. Unit of issue is each (EA), with no tolerance for variance in quantity, and delivery is FOB origin to the designated receipt warehouse in Tracy, CA. Inspection and acceptance occur at the destination, with a required delivery date 171 days from contract award and a need ship date of January 31, 2027. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attribute verification levels are defined as VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity requirements mandate CMMC Level 2 self-assessment and covered defense information handling per RD002. Item Unique Identification is not required as per customer request, with DFARS 252.211-7003(c)(1)(i) governing marking. All documentation must comply with SAR and removal of government identification procedures for non-accepted supplies.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The U.S. Department of Defense, through DLA Aviation, is soliciting quotes for six Air Battery Chargers with NSN 4920014982543 under solicitation number SPE4A526T326V, which is a Small Business Set Aside for total award. The requirement is for delivery to W1A8 DLA DISTRIBUTION within 171 days after award, and only approved sources identified as 3RCD2 4159-MIL and 3RCD2 CA 1550 MIL are eligible. This is an electronic request for quotation with no hard copies available, and specifications, plans, or drawings are not provided. All responsible sources may submit a quote electronically, provided it is received by the deadline of August 12, 2026. The solicitation is classified under NAICS code 334419, and inquiries must be directed via email to DibbsBSM@dla.mil, with further details accessible through the SAM.gov link or DIBBS portal using the solicitation number. The contracting office is located in Richmond, Virginia.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details