RIVET, BLIND

This contract specifies the procurement of 681 units of a blind rivet identified by NSN 5320-01-232-5671 and part number MS90354U0610, manufactured in accordance with the revision NR 04 of the non-government standard NASM90354 dated 12/19/2024, and referenced to NASM81177 revision 2 dated 3/31/2015. The item is classified as a commercial item and a critical application item, requiring strict compliance with technical and quality requirements stipulated in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and attributes are to be verified at specified levels: VII for critical, IV for major, and II for minor, corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item must be manufactured to the current revision of the applicable standard, and past production to prior revisions is acceptable only if manufactured before the solicitation date. Delivery is required FOB origin within 79 days, with inspection and acceptance occurring at the point of origin. Packaging must conform to ASTM D3951, with mandatory marking and labeling per MIL-STD-129, and palletization in compliance with DLA Packaging Requirements. The unit of issue is each (EA), with no variance allowed in quantity, and the contract specifies a unit price of $681.00 per unit, totaling $464,561.00. The item shall be delivered to DLA Distribution Depot Oklahoma at Tinker AFB, and the required ship date is July 20, 2026, with the original delivery deadline set for January 20, 2027. All packaging and physical identification must adhere to RQ017, and government identification must be removed from non-accepted supplies per RQ011. Transportation procedures follow DLA Procurement Notes C19 and C20, and the solicitation is issued under contract number SPE4A6-26-T-33R6, with primary point of contact Debra Fowler at DLA.