This Solicitation opportunity from Department Of Defense was posted on April 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RIVET, BLIND

Closed

SPE4A0-26-T-2890Federal

Submission Closed05/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

DIBBS

NUT , SELF-LOCKING, PLThe contract involves the procurement of 27 self-locking nuts, identified by the National Stock Number 5310-00-283-4635. The solicitation, issued by the Department of Defense's Defense Logistics Agency, is designated under the number SPE4A6-26-T-92R0 and is intended for federal acquisition purposes. Key dates include the posting date of June 15, 2026, and a response deadline on June 23, 2026. This solicitation does not specify any set-aside type or NAICS code, indicating that it is open without particular preference for small businesses or other categories. The purchase request associated with this contract is numbered 7017149106. Although detailed location and point of contact information is absent, the contract is firmly anchored within federal procurement channels, with the Defense Logistics Agency serving as the contracting agency responsible for managing this acquisition.

Defense Logistics Agency

POSTED

DEADLINE

PIN-RIVETThe contract involves the procurement of 12 PIN-RIVETS with the National Stock Number 5320-01-696-1475. This solicitation is issued by the Defense Logistics Agency under the Department of Defense, identified by the solicitation number SPE4A6-26-T-92R4. The contract was posted on June 15, 2026, with a response deadline of June 23, 2026. The solicitation is classified as a federal contract, with no specified set-aside or NAICS code indicated. The procurement does not list a specific location for the place of performance or the agency’s office address, and there is no point of contact provided within the contract details. The contract remains open for responses through the DIBBS platform, highlighting the standardized federal purchasing procedures for acquiring these PIN-RIVETS.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract pertains to the procurement of a single unit of a cap socket head screw identified by the National Stock Number 5305-01-721-0324. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-92J7. It was posted on June 15, 2026, with a response deadline set for June 23, 2026. This federal solicitation does not specify any set-aside status or NAICS code, and the place of performance details are unspecified. The contract involves a purchase request number 7017127215 for quantity one of the specified item. The contracting agency is a federal entity, ensuring adherence to government procurement regulations. Although specific contact details and office locations are not provided, the contract and related solicitation information can be accessed through the provided online link on the Defense Logistics Agency’s bidding portal.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract pertains to the purchase of seven units of a socket head cap screw identified by the National Stock Number (NSN) 5305-01-283-4206. It is issued by the Defense Logistics Agency, a part of the Department of Defense, under the solicitation number SPE4A6-26-T-92P3. The solicitation was posted on June 15, 2026, with a response deadline set for June 23, 2026. This contract is categorized as a solicitation type and does not specify any type of set-aside or NAICS code. The place of performance and specific office address details are not provided. The procurement is managed within a federal organization framework, indicating a government acquisition focused on fulfilling defense-related hardware needs.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract involves the procurement of a single unit of a cap socket head screw, identified by the National Stock Number (NSN) 5305-01-684-3687. The solicitation, issued under the number SPE4A6-26-T-92L1, was posted on June 15, 2026, with a response deadline set for June 23, 2026. This solicitation is managed by the Defense Logistics Agency, a branch of the Department of Defense. The contract is a straightforward purchase request (7017127199) for one item, with no specified set-aside or NAICS code indicated, meaning it is open and not restricted to certain business types. The place of performance and specific office address details are unspecified. Interested parties can access the solicitation details and respond via the provided Defense Logistics Agency online portal.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

This contract covers the procurement of a blind rivet identified by NSN 5320-01-591-0439, with a total quantity of 1 pound to be delivered to Marine Aviation Logistics Squadron 39 at Camp Pendleton, California. The delivery timeframe is set at five days from the award, with inspection and acceptance occurring at the origin point. Packaging must comply with ASTM D3951, MIL-STD-129, and specific DLA packaging and marking requirements to ensure proper identification and handling throughout transit. The contract includes rigorous quality control provisions, referencing applicable DLA technical and quality standards, including MIL-STD-1916 and ASQ H1331 sampling procedures to verify compliance with critical and major attributes. The solicitation issued by the Department of Defense’s Aviation Supply Chain ESOC BUYS requires adherence to detailed quality assurance guidelines, tailored higher-level contract requirements, and strict handling of government identification on non-accepted supplies. Shipments must be traceable, shipped by reliable carriers rather than parcel post, and palletized according to DLA standards. The contract includes contact information for procurement inquiries and is governed by the DoD authorized unit of issue standards. The requirement is for a simplified acquisition with a focus on stringent quality and packaging protocols to support military readiness and logistics at Camp Pendleton by April 27, 2026.

General Info

Procurement of 1 pound blind rivets delivered to Camp Pendleton within five days, meeting strict quality and packaging standards.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing View NAICS

Place of Performance

PO BOX 555761, CAMP PENDLETON, CA, 92055-5761, US

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-2890.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedApr 30

Solicitation

Response DeadlineMay 8

Deadline has passed

Submission Closed

05/08/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Office AddressUS

Contacts

Danita Davis

contact@example.gov

+1 (555) 000-0000

Full Description

RIVET,BLIND
RIVET,BLIND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
IAW BASIC NON GOVT STD NAS9304
REVISION NR 7 DTD 03/31/2020
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A0-26-T-2890
SECTION B
PR: 7016523370 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016523370 0001 LB 1.000
NSN/MATERIAL:5320015910439
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R09808
MARINE AVIATION LOGISTICS SQDN 39
MALS-39 MAG-39 3D MAW
PO BOX 555761
CAMP PENDLETON CA 92055-5761
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R09808
MARINE AVIATION LOGISTICS SQDN 39
MALS-39 SUPPLY MAG-39 3D MAW
BLDG 23122 SUPPLY CIRCLE
CAMP PENDLETON CA 92055-5761
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R098086111G941
RDD: N
PROJ: AK0 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: FC: 2N
SPE4A0-26-T-2890
SECTION B
PR: 7016523370 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:04/27/2026
SPE4A0-26-T-2890 NSN/Part Number: 5320-01-591-0439 Quantity: 1 LB Purchase Request: 7016523370QTY: 1 Delivery: 5 days ADO