Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RIVET, BLIND

Active
SPE4A6-26-T-05VUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 82 blind rivets identified by NSN 5320-01-108-0098 and part number NAS1921M08-11W, manufactured to the current revision of the NAS1921 standard published by a consensus non-government organization. The item is classified as a commercial item and must be sourced exclusively from qualified suppliers whose manufacturing data is accepted in referenced standards such as MIL-HDBK-5J/MMPDS-01. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs consistent with critical, major, and minor classifications. All hardware must comply with the latest revision of the standard, though previously accepted prior revisions remain acceptable for existing inventory. Packaging and marking must adhere to ASTM D3951 and MIL-STD-129, with packaging subject to DLA Master List of Technical and Quality Requirements which override any conflicting standards. Palletization follows RP001, and all items must be marked in accordance with RQ017 for physical identification. The delivery point is FOB origin with a 171-day delivery schedule, requiring delivery no later than January 10, 2027, and quantity variance is strictly zero percent. Inspection and acceptance occur at origin, with the unit of issue being each. The contract’s technical and quality requirements are governed by the DLA Master List in effect on the solicitation issue date, and the item is subject to the DoD’s authorized unit of issue guidelines. Shipping and delivery instructions direct the product to the DLA Distribution facility in New Cumberland, Pennsylvania, using the provided parcel post and freight addresses, with transportation procedures governed by DLAD Proc Notes C19 and C20. The solicitation was issued on July 14, 2026, with responses due by July 22, 2026.

General Info

Procure 82 NAS1921M08-11W blind rivets, FOB origin, zero variance, delivered by Jan 10, 2027, per DLA and MIL standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-05VU DLA Aviation Jul 15 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
SUMMER ALLEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RIVET,BLIND
RIVET, BLIND
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MONEL
FOR ITEMS LISTED IN MIL-HDBK-5J/MMPDS-01,
JOINT ALLOWABLE REQUIREMENTS APPLY.
********************************************
QUALIFIED SUPPLIERS CAN ONLY PROVIDE PARTS FROM
MANUFACTURERS WHOSE DATA HAS BEEN ACCEPTED FOR
PUBLICATION IN THAT REFERENCE.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
SPE4A6-26-T-05VU
SECTION B
TDP Rev C Gen 3 IAW BASIC NON GOVT STD NAS1921 REVISION NR 10 DTD 05/31/2026 PART PIECE NUMBER: NAS1921M08-11W
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486757 0001 EA 82.000
NSN/MATERIAL:5320011080098
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
SPE4A6-26-T-05VU
SECTION B
PR: 7017486757 PRLI: 0001 CONT’D
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/10/2027 Original Required Delivery Date:12/08/2026
SPE4A6-26-T-05VU NSN/Part Number: 5320-01-108-0098 Quantity: 82 EA Purchase Request: 7017486757QTY: 82 Delivery: 171 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
PLUNGER, DETENTThe contract pertains to the procurement of 12 units of a PLUNGER, DETENT with NSN/Part Number 5340-01-487-6789, with a delivery requirement of 140 days after order. The solicitation, identified as SPE7L1-26-R-0107, was posted on July 15, 2026, and responses are due by August 14, 2026, under the Department of Defense’s Land Supply Chain. The item is subject to cybersecurity compliance under the Cybersecurity Maturity Model Certification (CMMC) Level 2, requiring the vendor to be a certified third-party assessment organization. Technical and quality requirements referenced by R or I numbers must adhere to the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is controlled under ITAR or EAR, restricting exportation—including disclosure to foreign nationals—without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to export-controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and validation through the DLA questionnaire.
LAND SUPPLY CHAIN

POSTED

in about 9 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNLOCKThe contract is for the procurement of 1,794 units of a STUD ASSEMBLY, TURNLOCK FASTENER with NSN 5325-00-859-3783 and part number 27S8-12-1AB, sourced from ALCOA GLOBAL FASTENERS and HOWMET GLOBAL FASTENING SYSTEMS INC. The item is designated as a critical application component and must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede other standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; any unspecifed attributes are treated as major with zero non-conformances required for acceptance unless otherwise stated in the contract. The supplier must provide full documentation for source approval and physically mark each item as required by RQ017, and remove any government identification from non-accepted supplies as per RQ011. All units must be packaged per ASTM D3951 and labeled and marked per MIL-STD-129, with palletization conforming to DLA’s RP001 packaging requirements. The delivery is FOB origin with a 190-day lead time, no quantity variance allowed, and inspection and acceptance occurring at destination. The specified unit of issue is each (EA), and the total contract value is based on the quantity and unit price outlined in the CLIN. The shipment must be delivered to DLA Distribution Jacksonville by January 29, 2027, with the original required delivery date set for March 6, 2027. Transportation instructions follow DLAD Proc Notes C19 and C20, and the purchasing office is under the Department of Defense’s Aviation Supply Chain, with primary point of contact Jade Stringfield. The contract was solicited under SPE4A1-26-T-2432 with a NAICS code of 332510 and a response deadline of July 22, 2026.
AVIATION SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIMThe contract pertains to the procurement of eight SHIM units identified by NSN 5365-00-458-2062 under solicitation SPE4A7-26-T-570X, with a delivery requirement of 20 days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. All non-accepted supplies must have government identification removed in accordance with object text IDs ZD080 and A0003. The item includes technical data subject to export control under ITAR or EAR, restricting its disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA approval may access this controlled data, as mandated by DFARS 252.225-7048. The solicitation was posted on July 14, 2026, with responses due by July 22, 2026, and is classified under NAICS code 332510. The contracting office is the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Georgina Vass as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, DOUBLE ANGLEThe contract specifies the procurement of 126 units of a BRACKET, DOUBLE ANGLE with NSN 5340014369694 under solicitation SPE4A5-26-T-287K, requiring delivery within 171 days to Robins AFB, Georgia, FOB origin. All items must comply with DLA’s Technical and Quality Requirements as defined in the DLA Master List, including packaging standards under RP001 and labeling in accordance with MIL-STD-129. The material is to be commercially packaged per ASTM D3951 if non-hazardous per FED-STD-313, or per TQ requirement IP025 if hazardous, with DLA requirements superseding ASTM standards. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero non-conformances unless otherwise stated and must align with designated verification levels or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively. The contract mandates a zero variance in quantity, with inspection and acceptance occurring at destination. Palletization must adhere to DLA packaging requirements and each unit must be physically marked per RQ017. The required ship date is January 10, 2027, with an original delivery deadline of December 23, 2026, and all packaging and labeling must use the specified unit of issue and quantity per unit pack. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20, and all correspondence and delivery must be directed to the provided Warner Robins address.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details