Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RIVET, BLIND

Active
SPE4A6-26-T-14FZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 278 blind rivets, identified as NSN 5320013383178, under solicitation number SPE4A6-26-T-14FZ. The item is classified as a commercial critical application item with approved part numbers from Northrop Grumman Systems Corporation, Allfast Fastening Systems, and SPS Technologies. Delivery is required within 140 days, with a need date of July 20, 2026, and a final required delivery date of November 21, 2026. Shipping is FOB Origin and destined for the DLA Distribution Depot Oklahoma at Tinker AFB. Quality and packaging must adhere to strict standards, including MIL-STD-129 for marking and ASTM D3951 for packaging, with DLA Master List requirements taking precedence. Sampling will follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Inspection and acceptance will occur at the destination. The contract specifies a zero percent quantity variance and requires compliance with specific government identification and marking requirements.

General Info

Procurement of 278 blind rivets for DLA Oklahoma, delivery by November 21, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-14FZ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Debra Fowler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RIVET,BLIND
RIVET,BLIND
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
>>>>>>>>>>>>>>>>>>>
CRITICAL APPLICATION ITEM
NORTHROP GRUMMAN SYSTEMS CORPORATION 76823 P/N 03A062C6-6
ALLFAST FASTENING SYSTEMS, LLC 53551 P/N AF1240N-6-6
SPS TECHNOLOGIES, LLC 11815 P/N CR4623-6-6
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-14FZ
SECTION B
PR: 7016473412 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016473412 0001 EA 278.000
NSN/MATERIAL:5320013383178
DELIVERY (IN DAYS):0140
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:07/20/2026 Original Required Delivery Date:11/21/2026
SPE4A6-26-T-14FZ NSN/Part Number: 5320-01-338-3178 Quantity: 278 EA Purchase Request: 7016473412QTY: 278 Delivery: 140 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-897U
The contract pertains to the procurement of 15 protective dust and moisture seal plugs with NSN 5340-01-434-1353, issued under solicitation SPE7L1-26-T-897U by the Defense Logistics Agency through the Land Supply Chain organization. Delivery is required within 290 days from award, with responses due by August 10, 2026, and the solicitation opened on July 30, 2026. The item is subject to full and open competition under NAICS code 332510, and technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must comply with prohibitions against Class I ozone-depleting chemicals, and any substitutes require prior approval unless explicitly authorized. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, necessitating prior authorization for any export or disclosure to foreign persons, including foreign nationals within the U.S., with DFARS 252.225-7048 enforcing compliance. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. Packaging must adhere to DLA requirements, and government identification must be removed from non-accepted supplies. The place of performance is identified as New Cumberland, Pennsylvania, 17070-5002, with Isabelle Szulewska listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-14HM
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 395 straight headed pins under NSN 5315-00-446-9475. The contract requires delivery within 241 days after receipt of order and is categorized under NAICS code 332510. Performance is located in Cherry Point, and the solicitation is identified by number SPE4A6-26-T-14HM. The agreement is subject to strict technical and quality requirements as outlined in the DLA Master List, including specific mandates for packaging, quality conformance inspection, and bare item marking. Notably, the contract involves covered defense information and requires CMMC Level 2 self-assessment. Due to the nature of the technical data, the project is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to access controlled data.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
ANODE, CORROSION PRE
Solicitation # SPE7L1-26-T-878K
The contract solicitation SPE7L1-26-T-878K issued by the Defense Logistics Agency under the Department of Defense seeks eight units of an anode for corrosion prevention with NSN 5340-01-691-7061, with a 165-day delivery window from the order date, targeting a need ship date of January 19, 2027, and a final delivery deadline of August 29, 2027. The delivery location is the DLA Distribution New Cumberland Facility in New Cumberland, Pennsylvania, with FOB Origin terms applying and all inspection and acceptance performed at the destination. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including climate-controlled preservation method 33, cold/dry storage, and preservation material code 49. The invoicing process mandates use of Wide Area WorkFlow (WAWF) for payment requests with specific document types based on contract line item structure. The solicitation includes mandatory FAR and DFARS clauses covering equal opportunity for workers with disabilities, combating trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification with required Safety Data Sheets, cybersecurity through NIST SP 800-171, transportation via U.S.-flag vessels, whistleblower rights, disclosure of information, and prohibitions on certain defense telecommunications equipment. Offerors must provide their Unique Entity Identifier and CAGE code, and affirm their small business status or other socioeconomic designations if applicable, with full disclosure required for joint ventures and entities supplying covered telecommunications equipment. Proposals must be submitted electronically via DIBBS by August 6, 2026, and the contract type and pricing remain unspecified pending award, with estimated value calculated from visible line items at approximately $145,880. No formal section for evaluation factors or a complete list of attachments was provided, and certain administrative details like payment office addresses, AAC/TAS/ACRN codes, and point-of-contact information for the COR or PCO will be determined at award execution.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L4-26-U-1100
This contract is a solicitation issued by the Department of Defense, specifically the LSO Combat Vehicles and Armament, for the procurement of 125 retaining straps. The items must be constructed of steel with either cadmium or zinc plating and are classified as critical application items. Production must adhere to specific technical data packages, including NASM21314 Revision 3 and reference drawing 98752 200415485 Revision E. The procurement is designated as a total small business set-aside under NAICS code 332510. Key requirements include strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. The contract prohibits the use of Class I ozone depleting chemicals and mandates that any substitute chemicals be submitted for approval. Delivery is required within 63 days after order, with FOB Origin terms and inspection and acceptance occurring at the destination. The solicitation is open for full and open competition among eligible small businesses.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A7-26-T-628L
This contract is a solicitation for the procurement of pin-rivets, identified by NSN 5320006375350 and part number HS72-6-410. The requirement is split into two line items totaling five units, with three units under CLIN 0001 and two units under CLIN 0002. Delivery is required within 20 days, with FOB and inspection/acceptance points set at the origin. The items are to be shipped to the NAEW & CF E-3A Component facility in Geilenkirchen, Germany. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. The item is designated as a critical application item, and the procurement is managed by the Department of Defense ASC Supplier Oper AE and AF Div.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7M2-26-Q-0760
This contract is for the procurement of 10 mounting brackets, identified by NSN 5340-01-666-5332, under solicitation SPE7M2-26-Q-0760. The items are designated as critical application items and must adhere to Technical Data Package Revision B Gen 4 and basic drawing 16236 RE-016665332 Revision A. The agreement is established as a firm fixed price contract with a delivery requirement of 150 days after receipt of order and a strict zero percent quantity variance. The supplier must comply with several DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking standards per MIL-STD-129. A significant environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Inspection and acceptance will occur at the destination, with shipments directed to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-T-629U
This contract is for the procurement of 47 machine thread plugs under NSN 5365-01-258-4772. The item is designated as a critical application item and must be produced by an accredited manufacturer or assembly distributor listed on the Performance Review Institute PRI Qualified Products List or Qualified Manufacturers List. Compliance with specific technical standards is required, including SAE AS5169D, AS4891, and AS4875B. The agreement mandates strict quality control and sampling methods in accordance with MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan for acceptance. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds. Delivery is set for 165 days after order, with shipping and acceptance occurring at the destination, DLA Distribution Cherry Point. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNBUTTON FAS
Solicitation # SPE4A6-26-T-83W2
This contract is for the procurement of 636 turnbutton studs, identified by NSN 5325-00-055-7451 and part number 12553023. The order is governed by basic drawing 19200 12553023 Revision B and requires adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-2073-1E packaging data. Delivery is set for 170 days after order, with a required delivery date of January 19, 2027, and shipment to the DLA Distribution New Cumberland facility in Pennsylvania. Quality assurance is managed through sampling methods compliant with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract incorporates specific technical and quality requirements from the DLA Master List and mandates compliance with Covered Defense Information and CMMC Level 2 certification. The shipment is FOB Origin with a strict zero percent quantity variance allowed.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
HINGE PIN
Solicitation # SPE4A6-26-T-14HE
This contract is for the procurement of 189 hinge pins, identified by NSN 5315-00-633-1934 and Boeing part number 5-95632-8. The items are designated as critical application items and require a Certificate of Quality Compliance with every shipment. Delivery is set for 168 days after order, with a required delivery date of April 17, 2028, shipping FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The procurement is subject to a Boeing Rights Guard license agreement, meaning restricted technical data packages are used and non-disclosure and destruction conditions apply. Quality assurance involves source inspection and sampling according to MIL-STD-1916 or ASQ H1331. Marking must comply with MIL-STD-130 and specific Boeing requirements, including the National Stock Number and CAGE codes, while packaging must adhere to ASTM D3951 and MIL-STD-129.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-283R
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of 400 units of SHIM, identified by NSN/Part Number 5365-00-889-8852. The contract requires delivery within 279 days after order and is categorized under NAICS code 332510. Performance is located in New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as defined in the DLA Master List, including specific mandates for packaging, physical identification, and inspection at origin. Notably, the contract involves export-controlled technical data subject to ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed specialized training to access the data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14FE
This contract is for the procurement of a threaded pin-rivet, identified as a commercial off the shelf item and a critical application item. The specific part is manufactured by Hi-Shear Corporation under part number HL413VAP-16-26 and national stock number 5320014153379. The order consists of one unit with a required delivery date of August 4, 2026, and a delivery timeframe of five days after order. The agreement mandates strict adherence to DLA packaging requirements and ASTM D3951 standards, with marking and labeling following MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, emphasizing a zero-based sampling plan for acceptance. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically Tinker AFB in Oklahoma.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-909M
Solicitation SPE7L1-26-T-909M is a federal procurement issued by the Department of Defense Land Supply Chain via the Defense Logistics Agency for 380 units of helical compression springs, identified by NSN 5360011853319. This critical application item must be manufactured according to the current revisions of SAE AS24585E and SAE AS13572. The contract specifies a delivery timeline of 108 days after the date of order, with the primary shipping and delivery destination being Arizona Industries for the Blind in Phoenix, Arizona. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sampled lots. Packaging must comply with ASTM D3951 and RP001, while all marking and labeling must adhere to MIL-STD-129. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds. Administrative requirements include mandatory electronic invoicing through Wide Area WorkFlow and compliance with various DFARS clauses regarding cybersecurity, the safeguarding of covered defense information, and the prohibition of certain foreign telecommunications equipment.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541611
New
DIBBS
Export Control and Technical Data Compliance Support
Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging, Preservation, and Marking
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Certification Services
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
DIBBS
Precision Manufacturing of Sleeve Spacers
Machine Shops

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335999
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-01ZJ
A cable assembly with the NSN 6150-01-555-8898 is being solicited under contract number SPE4A6-26-T-01ZJ for a quantity of three units. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, falls under NAICS code 335932 and is categorized as a federal procurement. The request was posted on June 29, 2026, with a response deadline of July 7, 2026, allowing vendors a limited window to submit proposals. Performance location and point of contact details are not specified, and no set-aside provisions are in effect. The solicitation is accessible through the DIBBS system, where interested parties can review full requirements and submit responses.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
PISTON, LINEAR ACTUA
Solicitation # SPE4A6-26-T-05XM
This contract pertains to the procurement of 29 units of a linear actuating cylinder piston, identified by part number 920371 and NSN 1650-01-241-9480, manufactured by TRIUMPH ACTUATION SYSTEMS LLC. The item is classified as a critical application component and must adhere to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging and labeling must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all units delivered FOB origin in strict accordance with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at the origin, and sampling for quality verification will follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. The contract mandates CMMC Level 2 self-assessment, source approval documentation, and removal of government identification from non-accepted items. The delivery schedule requires fulfillment within 171 days from the award, with an original required delivery date of August 19, 2027, and a need ship date of January 10, 2027. The item is to be delivered to the specified receiving warehouse in Tracy, California, and transportation logistics are governed by DLAD procedural notes C19 and C20. No quantity variance is permitted, and pricing is fixed at $29.00 per unit for a total contract value of $841. The solicitation was issued under contract number SPE4A6-26-T-05XM, with responses due by July 22, 2026. Technical data is proprietary and insufficient for competitive bidding, meaning no bidset was made available, and all performance and compliance obligations fall exclusively on the manufacturer to meet the defined military and quality controls without deviation.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332216
New
DIBBS
JACK, HYDRAULIC, HAND
Solicitation # SPE4A6-26-T-14GQ
This solicitation is for the procurement of six hand-operated hydraulic jacks, specifically part number 942AS100 from the Columbus Jack Corporation, under NSN 5120005445647. The contract is issued by the Department of Defense ASC Commodities Division and is designated as a Women-Owned Small Business Set-Aside. Delivery is required within 169 days, with a need ship date of January 31, 2027, and an original required delivery date of April 9, 2027. The items must be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. Inspection and acceptance will occur at the destination. The material has no shelf life requirement, and Item Unique Identification is not required for this order.
Saw Blade and Handtool Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EYE
Solicitation # SPE4A6-26-T-907M
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of two eye bolts under part number 5306-01-047-6226. The contract requires delivery within 171 days after receipt of order and is subject to specific technical and quality requirements outlined in the DLA Master List. Key compliance mandates include CMMC Level 2 self-assessment and third-party assessment, as well as strict adherence to DLA packaging and quality conformance inspection standards. The contract is heavily regulated by export control laws, specifically ITAR and EAR, meaning technical data cannot be shared with foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-controlled technical data training. The solicitation is identified by number SPE4A6-26-T-907M and falls under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-14AN
This contract is for the procurement of 100 feet of electrical insulation sleeving, identified by NSN 5970-00-063-1495 and part number M23053/1-103-0. The item is classified as a critical application commercial item and must be manufactured by an accredited provider listed on the Performance Review Institute QML or QPL. It must adhere to SAE AS23053/1 Revision A standards and has a specified shelf life of 12 months. Key requirements include strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. The contract prohibits the intentional addition of mercury or mercury-containing compounds. Delivery is required within 20 days after receipt of order, with a quantity variance allowance of plus 10 percent and minus 0 percent. Inspection and acceptance will take place at the destination.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-14EY
This contract is for the procurement of 229 plain hexagon nuts, identified by NSN 5310-01-430-2829. The items are classified as critical application items and must adhere to technical specifications outlined in basic drawing 97499 90-094 and non-government standard FF-N-836E. Delivery is required within 166 days, with a need ship date of January 28, 2027, and a final delivery date of March 14, 2027, to the DLA Distribution San Joaquin facility in Tracy, California. The agreement mandates strict compliance with several quality and security standards, including CMMC Level 2 self-assessment, Covered Defense Information requirements, and specific DLA packaging and marking standards such as MIL-STD-129 and ASTM D3951. Quality assurance will be conducted at the point of origin using sampling methods based on MIL-STD-1916 or ASQ H1331. The contract specifies a zero percent quantity variance and requires adherence to the DLA Master List of Technical and Quality Requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333611
New
DIBBS
ROTOR, TURBINE, NONAI
Solicitation # SPE4A6-26-T-09EF
The contract pertains to a turbine rotor, designated as NONAI, with part number 3206499000 and NSN 2835-01-643-7341, supplied by Geiger Pump and Equipment Company under solicitation SPE4A6-26-T-09EF. The item is to be delivered in a single unit with a firm fixed price and zero variance in quantity, due within 20 days of contract award, delivered FOB destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special marking code applied. The rotor is not required to have item unique identification, and no shelf life restrictions apply. The delivery address is a vessel shipment to USS MICHAEL MONSOOR DDG 1001 at APO AP 96694, with specific transport instructions prohibiting parcel post and mandating the fastest traceable means under DLA procedural notes. The item is subject to technical and quality requirements referenced from the DLA Master List, including sampling protocols per MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware except for specific functional uses defined by NAVSEA, and any portable devices containing mercury must include a secondary containment as per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and the contract is subject to federal acquisition regulations with no set-aside type specified.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details