Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RIVET, BLIND

Active
SPE4A6-26-T-12TZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 3 hundred-count units of blind rivets under NSN 5320-01-033-8176, with a unit of issue of HD (100), requiring strict compliance with technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements. The item is designated as a critical application component and must conform to non-government standards NAS9304 Rev 7, NAS1686 Rev 5, and Quality Assurance Provision 13873, with inspections performed at origin and acceptance determined there as well. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes must be verified at predefined levels corresponding to AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. All packaging and labeling must follow MIL-STD-129 and ASTM D3951, with palletization governed by DLA packaging requirements, and no variance in quantity is permitted. Delivery is due in 165 days FOB origin to Hill Air Force Base, Utah, with a required ship date of January 26, 2027, and original delivery date of March 21, 2027. The contractor must provide a Certificate of Quality Compliance and ensure all materials bear proper physical identification per RQ017, with government identification removed from non-accepted items per RQ011. Packaging and marking must meet all DLA mandates that supersede industry standards, and transportation logistics are governed by DLAD procedural notes C19 and C20. The procurement is managed under solicitation SPE4A6-26-T-12TZ, with primary point of contact Debra Fowler, and the solicitation was issued on August 5, 2026, with responses due by August 13, 2026. The item falls under NAICS code 332510 and is sourced through the Department of Defense’s ASC Commodities Division.

General Info

Procure 300 units of blind rivets per NSN 5320-01-033-8176, meeting NAS9304 Rev 7, zero defect acceptance, FOB origin to Hill AFB by March 21, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12TZ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Debra Fowler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RIVET,BLIND
RIVET,BLIND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
SPE4A6-26-T-12TZ
SECTION B
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
UNIT OF ISSUE= HD (100)
CRITICAL APPLICATION ITEM
TDP Rev E Gen 5 IAW BASIC NON GOVT STD NAS9304 REVISION NR 7 DTD 03/31/2020 PART PIECE NUMBER: P/N NAS9304BNS-5-05
TDP Rev E Gen 5 IAW REFERENCE QAP 13873 CDRLCOQC26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev E Gen 5 IAW REFERENCE NON GOVT STD NAS1686 REVISION NR 5 DTD 04/30/2026 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017685235 0001 HD 3.000
NSN/MATERIAL:5320010338176
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
SPE4A6-26-T-12TZ
SECTION B
PR: 7017685235 PRLI: 0001 CONT’D
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:01/26/2027 Original Required Delivery Date:03/21/2027
SPE4A6-26-T-12TZ NSN/Part Number: 5320-01-033-8176 Quantity: 3 HD Purchase Request: 7017685235QTY: 3 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9329
The contract pertains to the procurement of a Right Hand Single Arm Mounting Bracket, identified by NSN 5340016150030 and OSHKOSH DEFENSE LLC part number 3764286, with a total quantity of 176 units. Delivery is required within 116 days under FOB Origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container type D3, and marking per MIL-STD-129 with no special marking codes. Packaging and palletization must adhere to DLA’s official procurement requirements, and hazardous materials handling provisions apply if relevant. The contract is issued under a Small Business Set-Aside, with the solicitation number SPE7LX-26-U-9329 and a response deadline in August 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures following MIL-STD-1916 or ASQ H1331, and zero non-conformances expected unless otherwise stated. Identification of U.S. military property must conform to MIL-STD-130N. The unit of issue is each, priced at $176.00 per unit, for a total estimated price of $30,976.00, though this amount is not guaranteed for full purchase by the IDC.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9318
The contract pertains to the procurement of 631 units of a mounting bracket identified by NSN 5340-01-647-8723 under purchase request 1000239184. The solicitation, numbered SPE7LX-26-U-9318, was posted on August 5, 2026, with a response deadline of August 20, 2026, and requires delivery within 113 days of award. The item falls under NAICS code 332510 and is being sourced by the Department of Defense through the Strategic Acquisition Program Directorate. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Government identification must be removed from any non-accepted supplies. The primary point of contact is Theodore Misiolek, reachable via email and phone, and all submissions must be made through the DIBBS platform.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7LX-26-U-9330
The contract pertains to the procurement of 180 units of a hand crank identified by part number 1103-1945-01 and NSN 5340016237876 under solicitation SPE7LX-26-U-9330, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 76 days FOB origin with no variance allowed in quantity, and acceptance is to occur at the destination point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for non-hazardous items and FED-STD-313 for hazardous material classifications. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. The supply is covered under DLA Direct, CONUS, and the unit of issue is each, with a total price of $180. Documentation for source approval must be submitted if proprietary or insufficient data exists, and government identification must be removed from non-accepted supplies. The contract’s technical specifications are derived from the DLA Master List, the applicable revision of which is controlled by the solicitation issue date. Point of contact for inquiries is Theodore Misiolek, with the response deadline set for August 20, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LEVER (FPC)
Solicitation # SPEFA3-26-Q-0054
The contract pertains to the procurement of 8 units of a lever designated as FPC with part number 70209-21221-113 and NSN 1560-LLQJ59653, under solicitation SPEFA3-26-Q-0054, issued by the DLA Fleet Readiness Center Southeast. The contract specifies a firm fixed price with no variance allowed in quantity, requiring delivery within 30 days after award at destination with inspection and acceptance also occurring at the destination. The item is to be packaged in compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and unit of issue and packaging quantity must match contract specifications. Item Unique Identification is not required per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) applicable. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery address for freight shipping and parcel post is specified as the Fleet Readiness Center Southeast in Jacksonville, Florida, with the required delivery date set for August 4, 2026.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7LX-26-U-9327
The contract pertains to the procurement of 2,082 units of CLAMP, LOOP with NSN 5340-01-485-6847 under solicitation SPE7LX-26-U-9327, which was posted on August 5, 2026, with a response deadline of August 20, 2026. The acquisition is a Total Small Business Set-Aside as defined by FAR 19.5, classified under NAICS code 332510, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Delivery is required within 116 days after award, and the contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or amendment date. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed per RQ011. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-617P
The contract is for the procurement of 77 units of a SPACER, PLATE with NSN/Part Number 5365-00-768-1020 under solicitation SPE4A7-26-T-617P, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 233 days from award, with performance taking place in Corpus Christi, Texas, 78419-5255. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is classified under NAICS code 332510. This item is subject to a comprehensive set of technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, including specific clauses such as RD002 on Covered Defense Information, RQ017 on physical identification and bare item marking, and RQ032 on export control. Technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons both within and outside the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Packaging, government identification removal, and cybersecurity compliance including CMMC Level 2 certification for third-party assessors are also mandatory.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-Q-1458
The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CATCH, FLUSH
Solicitation # SPE7LX-26-U-9307
The contract pertains to the procurement of 806 units identified by NSN 5340-01-097-4918 under solicitation SPE7LX-26-U-9307, with a delivery requirement of 118 days after award. It mandates compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information as defined under RD002. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to disposition. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and falls under NAICS code 332510. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact, reachable via email and phone provided. The procurement is classified as federal with no set-aside designation specified.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LOCK, RIM
Solicitation # SPE7LX-26-U-9319
The contract pertains to the procurement of 297 units of a LOCK, RIM with NSN 5340-01-652-0224, issued under solicitation SPE7LX-26-U-9319 by the Strategic Acquisition Program Directorate within the Department of Defense. The requirement is subject to the DLA Packaging Requirements for Procurement and incorporates technical and quality specifications identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed online for full compliance. For this solicitation, the applicable version of the master list is determined by the solicitation issuance date. The contract is a total small business set-aside under FAR 19.5, with a NAICS code of 332510, indicating it is targeted toward small businesses in the manufacturing sector. The delivery deadline is set for 116 days after award, and the solicitation was posted on August 5, 2026, with responses due by August 20, 2026. Government identification must be removed from any non-accepted supplies in accordance with the specified requirements. The primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone listed in the contract data.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-12TL
The contract pertains to the procurement of 31 screw thread inserts under NSN 0001S00000052, with a delivery requirement of 541 days after date of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. The item is subject to Cybersecurity Maturity Model Certification Level 2 compliance, DLA packaging standards, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Physical identification of the bare item is required, though Item Unique Identification is waived based on service customer request under DFARS 252.211-7003. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. DFARS 252.225-7048 governs the handling of controlled technical data. The solicitation number is SPE4A6-26-T-12TL, issued on August 5, 2026, with responses due August 13, 2026. Performance is designated for Hill AFB, Utah, under the Department of Defense’s ASC Commodities Division, with Priscilla Holmes as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 334332
New
DIBBS
Military-Grade Cable Assembly Manufacturing and Supply

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details