Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RIVET, BLIND

Active
SPE4A7-26-T-598EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 2 units of RIVET, BLIND with NSN 5320-01-006-2154 under solicitation SPE4A7-26-T-598E, issued on July 28, 2026, with responses due by August 5, 2026. The item is classified as a commercial item and conforms to a military or consensus non-government part standard, allowing hardware manufactured to any prior current revision of the standard to remain acceptable, though all future production must meet the latest revision. No shelf life applies, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must comply with DLA requirements including removal of government identification from non-accepted supplies and physical identification of bare items. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones. Delivery is required within 10 days after award to Clackamas, Oregon, and inquiries should be directed to Brad Ingram at the Defense Logistics Agency. The solicitation is fully competitive under a federal specification, and covered defense information may apply.

General Info

Procure 2 blind rivets under NSN 5320-01-006-2154, deliver to Clackamas, OR within 10 days of award.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

BLDG 6410, CLACKAMAS, OR, 97015-9150, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-598E.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Brad Ingram
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RIVET,BLIND
RIVET,BLIND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
SPE4A7-26-T-598E
SECTION B
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 5320-01-006-2154 Quantity: 2 EA Purchase Request: 7017425328QTY: 2 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe item specified is a PIN, STRAIGHT, HEADED with NSN 5315-00-734-1175, quantity of 67 units, under purchase request 7015605086, with delivery required within 12 days ADO. This item is subject to strict export control regulations under either ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons regardless of location, including foreign national employees or subsidiaries of U.S. companies. Access to this technical data is restricted solely to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A6-26-T-10AJ, posted on July 28, 2026, with responses due by August 5, 2026. The procurement falls under NAICS code 332510 and is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in Cherry Point, North Carolina, 28533-5040. Primary point of contact is Debra Fowler, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAINThe contract pertains to the procurement of two solid plain disks with NSN 5340-01-005-1903 under solicitation SPE7L1-26-T-882P, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses are due by August 10, 2026. The item falls under NAICS code 332510, and the solicitation is governed by DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, accessible via the provided web link. All technical and quality specifications referenced by R or I numbers are incorporated by reference and must be strictly adhered to. Sampling and inspection protocols must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with the manufacturer allowed to choose attribute or variable inspection methods unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are deemed major. Acceptance criteria require zero non-conformances in the sample lot under MIL-STD-105/ASQ Z1.4 unless the contract specifies otherwise. Government identification must be removed from non-accepted supplies, and all provisions are subject to the revision of the DLA Master List in effect at the relevant solicitation or award date. Contact for inquiries is Michael Nordahl at dla.flbc2prs@dla.mil or 445-737-0596.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of one blind rivet, identified by NSN 5320-00-451-9167, under solicitation SPE4A6-26-T-10AH, issued by the ASC Commodities Division of the Department of Defense. The item is classified as a commercial item and must comply with applicable military or consensus non-government part standards, with hardware manufactured after the solicitation date required to adhere to the current revision of the governing standard. Past production to prior revisions remains acceptable. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition size. Packaging must meet DLA requirements, and any non-accepted supplies must have government identification removed. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and NAVSEA-approved chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The delivery timeline is 224 days after order, with performance designated at Hill AFB, Utah, and responses due by August 5, 2026. The solicitation is fully competitive under federal specification and is open to all eligible suppliers through the DIBBS procurement portal.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, EXTENSIONThe contract involves the procurement of a HANDLE, EXTENSION with part number B300-264-19/2 and NSN 5340-01-352-9560, for a quantity of six units, to be delivered within ten days to a military installation in Illgesheim, Germany. All items must be shipped FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging and marking must comply with commercial standards as specified for medical acquisitions, superseding MIL-STD-129 in favor of Medical Marking Standard No. 1, which dictates unique labeling requirements to ensure traceability and compliance. Each unit must be sealed in protective packaging and enclosed in durable commercial shipping containers suitable for carrier transport at the lowest cost. Wood packaging materials are required to be heat-treated or kiln-dried in accordance with DoD regulations, and all shipments must adhere to DLA’s packaging guidelines as referenced on their official site. The contract is issued under solicitation SPE7L1-26-T-882X, with a response deadline of August 10, 2026, and a required delivery date of July 24, 2026. The primary point of contact for the acquisition is Kristina Derry, and the unit of issue is each, priced at $6.00 per unit. The end recipient is the Air DSSA AWCF SSF at Storck Barracks, Building 6503, with additional shipment instructions governed by DLA procedural notes C19 and C20.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
HOUSING, GALILEAN EYEPIThe contract is for one unit of a Galilean eyepiece housing, identified by NSN 2040-01-317-1452 and part number 685B012544, supplied by Kollmorgen Corp. and L3 Technologies, Inc. with CAGE code 34228. Delivery is required within 20 days to the Trident Refit Facility at Kings Bay, Georgia, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application, and the use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components like batteries or specialized instruments, with additional containment requirements for portable devices. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, while avoiding plastics where possible. The contract prohibits parcel post and requires traceable freight shipping. The purchase request number is 7017643672, and the contract number is SPE7M4-26-T-289D, with an original required delivery date of July 24, 2026. All technical and quality requirements are governed by the DLA Master List, with specific provisions for environmental compliance and marking. The point of contact is Rory O'Reilly, and the solicitation closed on August 10, 2026.
FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR CThe contract is for the procurement of five units of BRACKET, VEHICULAR C with NSN 2590-01-583-1193 and part number 3801940 from OSHKOSH DEFENSE LLC, under solicitation SPE7L0-26-T-0386. Delivery is required within five days FOB origin at a unit price of $5.00, totaling $25.00, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications, including ASTM D3951, and packaging must adhere strictly to MIL-STD-129 and RP001 packaging standards. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Packaging must be marked and labeled in compliance with DLA requirements, with palletization following RP001 guidelines. The product must be shipped by the fastest traceable means, excluding parcel post, to the designated delivery point at DLA LMP Zone 1, Building 552, Texarkana, TX. The required delivery date is July 29, 2026, and the item is to be inspected and accepted at the destination. Government-use identifiers and tracking codes such as W45G18, TCN W45G18620500XF, RDD 244, and PROJ TP 1 are encoded for logistics and accountability purposes.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, BLOCK, SECTIONThis contract pertains to the procurement of two units of CLAMP, BLOCK, SECTION with NSN 5340-01-356-7179, under solicitation SPE7L1-26-T-884D, with a response deadline of August 10, 2026, and a delivery requirement within five days after delivery order issuance. Full and open competition applies, and the work falls under NAICS code 332510 with the Department of Defense’s Land Supply Chain as the contracting agency. Compliance with cybersecurity requirements mandates that the vendor be a CMMC Level 2 certified Third-Party Assessment Organization, ensuring adherence to specified security controls. The contract incorporates technical and quality standards from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Packaging, handling, and disposal of supplies must align with DLA directives, and government identification markings must be removed from non-accepted items. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior government authorization for any transfer to foreign persons or entities, whether inside or outside the U.S., and DFARS 252.225-7048 governs its handling. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval prior to accessing controlled technical data. The point of contact for inquiries is Kristina Derry, reachable via email and phone provided in the contract data.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREADThe contract is for one machine thread plug with NSN 5365-01-180-6745, identified by purchase request 7017607599, under solicitation SPE4A0-26-T-4073, with a required delivery in five days by July 23, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition type. The product must comply with DLA packaging standards per RP001, including MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and specific packaging codes indicating preservation method 33, dry storage, and use of unit packaging with no intermediate containers. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and unspecifed attributes are treated as major. The item must be marked per MIL-STD-129 with no special markings, palletized according to DLA guidelines, and shipped FOB origin with no quantity variance allowed. Delivery is to Prince Sultan Air Base, Saudi Arabia, with transportation governed by DLA procedural notes C19 and C20. The point of contact is Danita Davis, and the unit of issue is each, with government use codes indicating procurement and distribution routing.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESSThe contract specifies the procurement of one unit of a cover and access item identified by NSN 5340-12-359-4324 and part number 868201001 under solicitation SPE7L1-26-T-884H. The delivery must occur within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and the item must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override general industry standards like ASTM D3951. If the item is hazardous per Fed-Std-313, it must meet TQ requirement IP025; if non-hazardous, it must be commercially packaged under ASTM D3951 while still adhering to DLA’s higher-priority specifications. All packaging must be labeled per MIL-STD-129, and palletization must follow RP001 guidelines. The item must be shipped traceably via freight to Fort Hood, Texas, using the specified destination address and must not be sent via parcel post. The required delivery date is July 27, 2026, and the contract is administered by the Department of Defense’s Land Supply Chain through the DLA, with Michael Nordahl listed as the primary point of contact. Government-use codes and shipment identifiers are included for internal tracking and logistics.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVETThe contract is for 328 units of a threaded pin-rivet collar, identified by NSN 5320-00-631-3429, under solicitation SPE4A6-26-T-10AF issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is due 256 days after contract award, with responses due by August 5, 2026. The item falls under NAICS code 332510 and is procured for performance at New Cumberland, Pennsylvania. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons, including employees and subsidiaries, with access limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and obtained approval. CMMC Level 2 certification is mandatory for third-party assessors, and DLA packaging standards apply. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) governs marking. Bare item marking and physical identification requirements are enforced. The sole point of contact is Susan Barlow, with email and phone provided for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, MANUAL CONTROL
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, NUT AND BOLTThe contract pertains to the procurement of 111 units of a retainer, nut, and bolt identified by part number SLR409-16AF and NSN 5340-01-387-5261, classified as a commercial item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on the acquisition size. Government identification must be removed from non-accepted supplies in accordance with RQ011. The solicitation, numbered SPE7LX-26-U-9045, was posted on July 28, 2026, with responses due by August 12, 2026, and is a total small business set-aside under NAICS code 332510. Delivery is required within 116 days after contract award, and the contracting office is the Strategic Acquisition Program Directorate within the Department of Defense. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332119
New
DIBBS
SPACER, STRAIGHTThe contract specifies the procurement of five straight spacers identified by NSN 5365-01-670-7905 and part number 92510A810 from McMaster-Carr Supply Company, with a unit price of five dollars per item and a total contract value of twenty-five dollars. Delivery is required within twenty days to the destination FPO AE 09577 aboard the USS LABOON DDG 58, with FOB destination terms, zero quantity variance allowed, and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E, marking must adhere to MIL-STD-129 without special markings, and palletization must follow DLA packaging requirements. Sampling for quality assurance follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. The shipment must be made using the fastest traceable means, prohibiting parcel post, and must reference DLA procedural notes for transportation logistics. The original delivery deadline is July 22, 2026, and all requirements are issued under solicitation SPE4A7-26-T-597T by the Department of Defense, with point of contact Channon Dillard at DLA.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
SEAL, INTERFACE AIRCThis contract pertains to the procurement of four units of a seal interface for a 25 mm gunport and mount, designated by NSN 1560-01-388-9484 and part number LE261-0122-0005, sourced from SEAL SCIENCE, INC. and RUBBERCRAFT CORPORATION OF CALIFORNIA. The item is classified as a critical application component and must comply with all applicable technical, quality, and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. Mandatory standards include MIL-STD-1916 or ASQ H1331 for sampling with zero non-conformances required unless otherwise specified, and verified attributes must adhere to specific verification levels or AQLs. Packaging must follow DLA requirements RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and IP025, while non-hazardous items must meet ASTM D3951, though DLA requirements override any conflicting commercial standards. The delivery is FOB origin with a firm fixed price and no variance allowed in quantity, and inspection and acceptance occur at the manufacturer’s facility. The item is not subject to Item Unique Identification as per customer request, though physical marking per RQ017 is required. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and documentation for source approval must be submitted per RC001. Delivery is due 330 days after award, with all shipments directed to DLA Distribution Warner Robbins, Georgia. The contract is issued under solicitation SPE4A7-26-Q-0894, with a response deadline in August 2026 and a required delivery date of September 25, 2027. The contract specifies detailed handling for packing and labeling and references transportation protocols per DLAD proc notes, with the DLA as the contracting authority and Shenita Tirado as the primary point of contact.

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
New
DIBBS
COVER, ACCESS, AIRCRAThe contract pertains to the procurement of one access cover for aircraft, identified by NSN 1560-00-811-2903, under solicitation SPE4A7-26-Q-0899, with a response deadline of August 7, 2026, and a delivery requirement of 250 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item involves technical data subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including within the United States, and binding U.S. companies and their foreign subsidiaries. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD training on handling export-controlled technical data, and approved completion of the DLA Export-Controlled Technical Data Questionnaire. The contracting activity is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen listed as the primary point of contact, and the performance location remains unspecified but is governed under U.S. federal procurement protocols.

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
New
DIBBS
FITTING, ORIFICE, TIPThe item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333, and delivery must be completed within 44 days after order date. The solicitation, identified as SPE4A7-26-Q-0895, was posted on July 28, 2026, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. The technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Commerce. This restriction applies to all entities, including U.S. companies and their foreign subsidiaries, as well as foreign national employees. Access to the controlled data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have successfully submitted and been approved for the DLA Export-Controlled Technical Data Questionnaire. The point of contact for inquiries is NYA Currie, reachable via email and phone provided.

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
New
DIBBS
PLUG, MACHINE THREADThe contract pertains to the procurement of 432 units of a machine thread plug with NSN 5365-01-035-4899 under solicitation SPE4A7-26-Q-0906, with a delivery requirement of 160 days after award. Technical data associated with this item is subject to export control under either the International Traffic in Arms Regulations or the Export Administration Regulations, meaning any disclosure to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed mandatory DLA training on handling export-controlled technical data, and have been formally authorized by DLA. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Mykhara Robinson as the primary point of contact.

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
New
DIBBS
PRODUCTION LOT TESTINGThe contract is for the procurement of 46 piston hydraulic accumulators with NSN 0001S00000062 under solicitation SPE4A7-26-Q-0901, with a delivery requirement of 134 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contractor must comply with stringent documentation standards including a Source Approval Request, DLA packaging specifications, and tailored higher-level quality requirements for both manufacturers and non-manufacturers. Inspection and acceptance must occur at origin, and government identification must be removed from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval from DLA may access this controlled data, as mandated by DFARS 252.225-7048. The contract is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Destiny Stevenson as the primary point of contact, and responses are due by August 11, 2026.

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
New
DIBBS
BRACKET, FEED TUBEThe item is a BRACKET, FEED TUBE with NSN 5342-01-128-1745, quantity of 32 units, under purchase request 7015852934, with a delivery requirement of 140 days after date of award. The solicitation number is SPE4A7-26-Q-0900, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 5, 2026, and a posting date of July 28, 2026. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, restricting its disclosure to foreign persons regardless of location and applying equally to foreign national employees and subsidiaries of U.S. companies. DFARS 252.225-7048 governs the handling of this controlled data. Contractors must hold an approved U.S./Canada Joint Certification Program certification, complete mandatory DLA training on handling export-controlled technical data, and submit the DLA Export-Controlled Technical Data Questionnaire to gain authorized access. Distribution is limited exclusively to DLA contractors who have received formal approval from the DLA controlling authority.

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
DIVIDER, POWER, RADIO FRThe contract is for one unit of a radio frequency power divider, part number 823HN718-1, identified by NSN 5895016995693, to be delivered to the USS RONALD REAGAN CVN 76 at FPO AP 96616. Delivery is required within 20 days of contract award, with FOB destination terms, and no variance in quantity is permitted. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item is classified as a critical application and must adhere to DLA’s packaging requirements, including prohibition of mercury or mercury compounds in preservation and packing. Sampling and quality verification follow MIL-STD-1916 or equivalently approved zero-based plans, with critical attributes assigned a verification level of VII or an AQL of 0.1. The unit of issue is each (EA), and the contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality standards identified by R or I numbers. The supplier must use the DLA Vendor Shipping Module for shipment tracking, and transportation instructions reference DLA procedural notes C19 and C20. The original required delivery date is July 24, 2026, with a procurement solicitation issued under SPE4A7-26-T-598A and a response deadline of August 5, 2026.
Other Communications Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
ADAPTER-CAP, CONSTANThe item specified is an ADAPTER-CAP, CONSTANT SPEED DRIVE with NSN 1650-00-286-2229, quantity of one unit, and a delivery deadline of 255 days after contract award. The solicitation is a total small business set-aside under FAR 19.5, issued by the Department of Defense under office designation ASC SUPPLIER OPER AE AND AF DIV, with response submissions due by August 5, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Disclosure to foreign national employees or foreign subsidiaries is strictly controlled. Access to this data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export-controlled training and questionnaire, and have received explicit approval from the DLA controlling authority. The contract includes compliance requirements for CMMC Level 2 certification by the third-party assessment organization and physical identification marking of the bare item as specified in RQ005 and RQ017.

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
HOUSING ASSEMBLY, GEARThe contract pertains to the procurement of four Housing Assembly, Gear units with NSN 2915-01-542-4682 under solicitation SPE4A7-26-R-X972, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. The item is classified as a Critical Application Item, and delivery is required within 240 days after award date with firm fixed pricing and no variance tolerance in quantity. Inspection and acceptance occur at the destination, with FOB origin terms applicable. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA Packaging Requirements for Procurement, including palletization standards, and all documentation must reflect the correct Unit of Issue and Quantity per Unit Pack as specified. The DLA Master List of Technical and Quality Requirements governs all technical specifications and override any conflicting standards, including labeling and marking requirements. The contract mandates strict compliance with cybersecurity standards requiring a CMMC Level 2 Self-Assessment and includes detailed quality assurance protocols, mandating sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, and zero non-conformances required for acceptance unless otherwise stipulated. The manufacturer may choose attribute or variable inspection methods under MIL-STD-1916, and MIL-STD-105/ASQ Z1.4 may be used for sample size determination only. All supplies must be free from government identification if not accepted, and measuring and test equipment must meet specified standards. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. The contractor must submit Source Approval Requests as outlined in RC001, and all packaging and shipment logistics must conform to DLAD Proc Notes C19 and C20 for transportation routing and first destination handling.

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327110
New
DIBBS
CABINET SECTIONThe contract requires the delivery of ten individual units of cabinet components identified by NSN 5975-12-378-8293, each priced at $1.00, for a total value of $10.00, with a strict delivery requirement of 20 days from the contract award. All items must be shipped FOB destination to the USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with no quantity variance permitted. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E, including specific preservation methods, unit containers, and packaging codes. Marking is mandated to meet MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The shipment must be sent via fastest traceable means using VSM, explicitly prohibiting parcel post, and aligned with DLA procedural notes C19 and C20. Sampling and quality verification adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated, and attributes are to be classified with corresponding verification levels or AQLs. Technical and quality compliance is governed by the DLA Master List of Requirements, referenced by R and I numbers, with revisions controlled by the solicitation or award date. The contract is issued under SPE4A7-26-T-597Z, and the original delivery deadline is July 22, 2026.
Pottery, Ceramics, and Plumbing Fixture Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATING COMPOUNDThe contract specifies the procurement of an electrical insulating compound identified by NSN 5970-00-418-1922 and part number TYPE ER, supplied in a one-gallon kit containing base and curing agent per specification SPE4A7-26-T-598H Section B. The item is classified as a critical application product with a non-extendable Type I shelf life of 12 months, governed by RS011 and requiring compliance with QPL/QML standards for all components, meaning only qualified sources listed on approved Qualified Products or Manufacturers Lists may be used. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129R, including special labeling for Type I shelf life and UN-certified 4G fiberboard packaging for hazardous materials if applicable. Mercury or mercury-containing compounds are strictly prohibited in the product, preservation, packing, or marking except for specific functional uses as outlined. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned verification levels or AQLs as defined. Delivery is FOB destination within 20 days of contract award to Joint Base Pearl Harbor Hickam, Hawaii, with no quantity variance allowed. Inspection and acceptance occur at the delivery point, and the item must be palletized per DLA packaging requirements. The product must be shipped in conformity with DLA Procurement Notes C19 and C20, and the contract includes detailed transportation, marking, and hazardous material handling directives.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details