Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RIVET, BLIND

Active
SPE4A6-26-U-4082Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation is for the procurement of 198 blind rivets under NSN 5320-00-161-2398 for the Department of Defense ASC Commodities Division. The contract is a total small business set-aside with a delivery requirement of 161 days after order. The items must be manufactured according to the current revision of the applicable military or consensus non-government part standard, though hardware produced previously to a then-current revision remains acceptable. Quality and technical compliance are governed by DLA master requirements, including specific mandates for packaging, bare item marking, and the removal of government identification from non-accepted supplies. Sampling and inspection must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific verification levels and AQLs assigned to critical, major, and minor attributes.

General Info

DoD procurement of 198 blind rivets, small business set-aside, 161-day delivery requirement.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

(1)

SPE4A6-26-U-4082.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Faye Harvell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RIVET,BLIND
RIVET,BLIND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 5320-00-161-2398 Quantity: 198 EA Purchase Request: 1000241511QTY: 198 Delivery: 161 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
BRACKET, DOUBLE ANGLE
Solicitation # SPE7L1-26-T-07V7
This contract is for the procurement of four double angle brackets, identified by NSN 5340-00-935-8821 and part number TA149D12-13-8. The order requires delivery within 20 days, with a required delivery date of August 28, 2026. Shipping is FOB Origin, and the destination for inspection and acceptance is Fort Stewart, Georgia. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging must comply with DLA requirements and MIL-STD-129, with specific instructions to use ASTM D3951 for non-hazardous materials. All technical and quality requirements are subject to the DLA Master List, and shipments must be sent via the fastest traceable means, excluding parcel post.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
STANDOFF, THREADED, SPAC
Solicitation # SPE7L1-26-T-07U0
This contract is a solicitation for the procurement of one threaded spacing standoff, identified by NSN 5340016842104 and part number 936334 from DRS Sustainment Systems, Inc. The order is issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-07U0. Delivery is required within 10 days after order, with a required delivery date of September 3, 2026. The shipment is destined for the US Army A Co 501st DSB 1st BDE 1AD in Hohenfels, Germany, and must be sent via the fastest traceable means, excluding parcel post. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-129 and ASTM D3951, unless the material is hazardous, in which case requirement IP025 applies. The terms specify FOB Origin, with both inspection and acceptance occurring at the destination. There is no allowed quantity variance for this item.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-720L
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of 37 units of SHIM, identified by NSN 5365-00-584-6081. The contract requires delivery within 148 days after the order is placed and falls under NAICS code 332510. The place of performance is located in Phoenix, Arizona. The agreement is subject to several critical technical and quality requirements, including specific DLA packaging standards and strict guidelines for the removal of government identification from non-accepted supplies. Notably, the contract involves technical data subject to ITAR and EAR export controls, meaning distribution is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MENDING
Solicitation # SPE4A5-26-T-409G
This solicitation, numbered SPE4A5-26-T-409G, is for the procurement of nine mending plates under NSN 5340-01-359-6995 for the Department of Defense. The contract requires delivery within 207 days after the order is placed and adheres to specific technical and quality requirements outlined in the DLA master list, including strict packaging and marking standards. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. The agreement includes rigorous security and compliance mandates, specifically requiring CMMC Level 2 self-assessment and adherence to Covered Defense Information protocols. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training to access the data. Item Unique Identification is not required for this specific request.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-07S2
This contract is for the procurement of one protective dust and moisture seal plug, identified by NSN 5340015371188 and Kubota Tractor Corp part number 16851-9601-0. The order is managed under solicitation SPE7L1-26-T-07S2 with a required delivery date of September 4, 2026, and a delivery timeframe of five days after order. The item is to be delivered FOB Origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania, using the fastest traceable shipping method. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging following ASTM D3951 for non-hazardous materials. It explicitly prohibits the use of Class I ozone-depleting chemicals and requires compliance with the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will take place at the destination.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
HINGE, BUTT
Solicitation # SPE7L1-26-T-07U2
This contract is for the procurement of one butt hinge, identified by NSN 5340016805202 and part number 936031 from DRS Sustainment Systems, Inc. The item is designated as a restricted source item requiring engineering source approval by the government design control activity. Delivery is required within 20 days, with a required delivery date of September 3, 2026, and shipping is set as FOB Origin with inspection and acceptance occurring at the destination. The shipment is destined for the US Army A Co 501st DSB in Hohenfels, Germany, and must be sent via the fastest traceable means. Compliance with DLA master lists for technical and quality requirements is mandatory, including specific packaging standards such as MIL-STD-129 and RP001. If the material is hazardous, it must follow IP025 requirements; otherwise, it should be commercially packaged according to ASTM D3951.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A7-26-T-719X
This solicitation from the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, is for the procurement of five straight headless pins, identified by part number 250-0531-320 and NSN 5315-01-396-9653. The contract is issued by Carver Pump Co and requires delivery within 20 days after receipt of the order. The agreement is subject to specific DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies. Additionally, the contract mandates strict compliance with NAVSEA 5100-003D regarding the prohibition of mercury or mercury-containing compounds, except in specific functional cases such as batteries or sensors. The solicitation is listed under NAICS code 332510 with a response deadline of September 16, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7L1-26-T-07U9
This solicitation issued by the Department of Defense Land Supply Chain is for the procurement of two hand cranks, specifically valve crankshafts, under part number 5340-01-108-8658. The contract requires delivery within 105 days after the order is placed and is categorized under NAICS code 332510. Performance of the contract is designated for New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as outlined in the DLA Master List, including specific packaging standards and the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
STRAP, WEBBING
Solicitation # SPE7L1-26-T-07W9
This contract is for the procurement of one unit of a commercial off the shelf webbing strap, identified by NSN 5340017214922 and part number GOV-WB-0001-0023 from Mazzella Lifting Technologies, Inc. The solicitation, numbered SPE7L1-26-T-07W9, is issued by the Department of Defense Land Supply Chain with a required delivery date of May 12, 2026, and a delivery timeframe of five days. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, with inspection and acceptance occurring at the destination. Key technical constraints include the prohibition of intentionally added mercury and compliance with MIL-STD-130N for property identification. Shipping must be handled via the fastest traceable means to the designated facility in Virginia Beach, Virginia, and must follow specific palletization and packaging data outlined in MIL-STD-2073-1E.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-27DU
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 652 units of pin-rivets under National Stock Number 5320-01-056-1564. The contract requires delivery within 192 days after the order is placed. The performance location is specified as San Diego, California, and the procurement falls under NAICS code 332510. The agreement is subject to strict technical and quality requirements, including specific DLA packaging standards and inspection and acceptance at origin. Notably, the contract contains export-controlled technical data governed by ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data. Compliance with DFARS 252.225-7048 is mandatory for the handling of this technical information.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE7L1-26-T-07V2
This solicitation, issued by the Department of Defense Land Supply Chain agency, is for the procurement of two vehicle cargo tie-downs under part number 5340-01-737-6903. The contract requires delivery within 133 days after the order is placed and specifies performance in Tracy, California. It is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging and the removal of government identification from non-accepted supplies. The agreement strictly prohibits the use of Class I ozone-depleting chemicals and mandates that any substitute chemicals be submitted for approval. Furthermore, the contract contains stringent export control regulations under ITAR and EAR, restricting the disclosure of technical data to authorized persons and requiring contractors to hold an approved US/Canada Joint Certification Program certification. All technical data is subject to Department of State or Department of Commerce authorization prior to export.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-U-4079
This solicitation, identified as SPE4A6-26-U-4079, is issued by the Department of Defense ASC Commodities Division for the procurement of 8,944 pin-rivets under NSN 5320-01-191-6371. The contract requires delivery within 124 days after receipt of order and falls under NAICS code 332510. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment and third-party assessment standards. It includes specific mandates for source approval documentation, packaging, and physical item marking, though item unique identification is not required. Furthermore, the contract is subject to stringent export controls under ITAR and EAR regulations, restricting the disclosure of technical data to authorized personnel and companies with approved US/Canada Joint Certification Program certification.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-27DA
This contract is for the procurement of two special purpose electrical cable assemblies, identified by NSN 6150-01-347-0052 and part number 29105605. The items are designated as critical application items and must be produced in accordance with the technical data package Revision A Gen 1. Delivery is required within five days after the order, with the shipment destined for the DHS CBP Office of Air and Marine in Tucson, Arizona. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically RP001, MIL-STD-129, and ASTM D3951. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-tolerance policy for non-conformances in sample lots. Additionally, the contractor must comply with CMMC Level 2 self-assessment and covered defense information requirements.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-27DE
This contract is for the procurement of 30 hexagon head cap screws, identified by NSN 5305016688703 and part number BRKD-DBC-MHGB from JDCI Enterprises, Inc. The item is classified as a Commercial Off The Shelf product. Due to the proprietary nature of the technical data, there is no approved technical data package available for competitive procurement. The delivery requirement is set for 20 days after order, with shipping and inspection points designated as destination. The shipment is destined for Fleet Activities Sasebo in Japan, with packaging and marking requirements adhering to MIL-STD-2073-1E and MIL-STD-129. The contract incorporates specific DLA master list technical and quality requirements, including the removal of government identification from non-accepted supplies and the potential application of covered defense information. The original required delivery date is August 27, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, RIBBED SHOULDER
Solicitation # SPE4A6-26-T-27DK
This contract is for the procurement of 12,112 ribbed shoulder bolts, identified by NSN 5306014109087. The items are designated as critical application items and must adhere to strict quality and technical requirements, including CMMC Level 2 self-assessment and specific DLA packaging and marking standards. A key restriction is the prohibition of mercury or mercury-containing compounds in the hardware, preservation, and packaging. The agreement specifies a delivery timeframe of 121 days, with a required delivery date of May 6, 2027, shipping FOB Origin to DLA Distribution Red River in Texarkana, Texas. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract is a total small business set-aside under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-27EG
This contract is a solicitation for the procurement of 10 machine bolts, identified by NSN 5306-66-150-7810 and part number 10302 for Thales Australia Bendigo Land. The agreement specifies a delivery timeframe of 10 days after receipt of order, with a required delivery date of January 29, 2026. Delivery is set as FOB Origin, while both inspection and acceptance will occur at the destination, which is the US Army 0101 CS BN CO A Distribution at Fort Riley, Kansas. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-2073-1E and MIL-STD-129. Quality assurance is governed by sampling methods aligned with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances in sample lots unless otherwise specified. There is no allowed quantity variance, meaning the exact amount of 10 units must be supplied.
Nonferrous Forging

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-27DM
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-27DM, is for the procurement of three shoulder screws identified by NSN 5305-01-508-1718. The contract requires delivery within 203 days after order and is categorized under NAICS code 332722. Performance is located in New Cumberland, Pennsylvania, with a response deadline of September 16, 2026. The agreement includes stringent regulatory and security requirements, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and marking standards. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD export-control training to access the data. Additionally, the contract mandates the removal of government identification from non-accepted supplies and compliance with the DLA Master List of Technical and Quality Requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-27CM
This contract is for the procurement of five cable assemblies, identified by NSN 6150-01-724-2744 and part number 81007 from Nishati Inc. The order is managed under purchase request 7018068236 with a required delivery date of November 21, 2026, and a delivery window of 65 days. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract specifies a zero percent quantity variance, meaning the exact amount of five units must be delivered.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLOSE TOLERANC
Solicitation # SPE4A6-26-T-26XK
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-26XK, is for the procurement of one close tolerance bolt, identified by NSN 5306-00-582-6419. The requirement is fully competitive and adheres to military and federal specifications. Delivery is required within five days after receipt of order, with the place of performance located at Fort Campbell. The contract incorporates several technical and quality requirements, including DLA packaging standards, physical identification and bare item marking, and the removal of government identification from non-accepted supplies. While covered defense information potentially applies, item unique identification is not required per the service customer. The response deadline for this solicitation is September 15, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332312
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPEA46-26-T-26TS
This contract is for the procurement of close tolerance screws, identified by NSN 5305010666750 and part number NAS1580A4T6. The items are classified as critical application hardware and must be manufactured according to the current revision of the applicable non-government part standard. The unit of issue is defined as a package of 50 pieces, with various quantities requested across multiple CLINs for delivery to several destinations, including the USS Theodore Roosevelt, USS George H W Bush, and other military installations. Key requirements include strict adherence to the DLA Master List of Technical and Quality Requirements, with physical identification and bare item marking following MIL-STD-130N. Inspection and acceptance are to occur at the origin, and sampling must comply with MIL-STD-1916 or ASQ H1331. Packaging must meet ASTM D3951 and MIL-STD-129 standards, ensuring that the entire length of the shank and threads are protected by a wrap or sleeve. Delivery is required within five days of order, with shipping conducted via the fastest traceable means.
Fabricated Structural Metal Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-27DL
This solicitation is for the procurement of 25 flat washers, identified by NSN 5310-00-182-6787 and part number LM307-34 from Lord Corp. The contract is issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-27DL, with a required delivery timeframe of 5 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements and physical identification marking standards. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. Technical and quality requirements are governed by the DLA Master List, and any non-accepted supplies must have government identification removed.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
WRENCH, RATCHET
Solicitation # SPE4A6-26-T-27DH
This contract is for the procurement of four ratchet wrenches, identified by NSN 5120410026077 and part number 2300716-0 from Steyr Motors AG. The order is managed under solicitation SPE4A6-26-T-27DH by the Department of Defense ASC Commodities Division. Delivery is required within 64 days of order, with a final required delivery date of April 17, 2026, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. A critical restriction is placed on the use of mercury, which shall not be intentionally added to the hardware except in specific functional exceptions. Quality assurance will be conducted at the destination using sampling methods aligned with MIL-STD-1916 or ASQ H1331.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, COTTER
Solicitation # SPE4A6-26-T-27CY
This contract is for the procurement of 121 cotter pins under solicitation number SPE4A6-26-T-27CY for the Department of Defense. The items must adhere to specific technical standards, including NASM24665 Revision 03 and ASME B18.8.1, and are classified as critical application items. Delivery is required within 90 days, with a need ship date of December 16, 2026, and a final delivery date of December 20, 2026. The shipment is destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Quality conformance is managed through a Certificate of Quality Compliance and specific sampling methods based on MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the origin, and the contract specifies a zero percent quantity variance. Physical identification must follow MIL-STD-130N, although Item Unique Identification is not required.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-27EC
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 20 socket head cap screws under NSN 5305-01-326-7582. The hardware must be manufactured from Nickel Alloy 400 with dimensions of .625-11 UNC3A x 1.000 nominal and a thread length of .530 nominal. The items must comply with FF-S-86E Type IV specifications, specifically utilizing a patch pellet or strip thread as the locking feature. The contract is being procured as fully competitive under NAICS code 332722. Delivery is required within 98 days after receipt of order, with the place of performance located in New Cumberland, Pennsylvania. The solicitation, identified as SPE4A6-26-T-27EC, was posted on September 8, 2026, with a response deadline of September 16, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS