This Solicitation opportunity from Department Of Defense was posted on June 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RIVET, BLIND

Closed

SPE4A6-26-T-70C2Federal

Submission Closed06/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0010426QAB90

This contract pertains to the manufacture of the HOIST STRAP ASSY with part number 5641754-303 and CAGE code 53711, issued as a total small business set-aside under NAICS code 332510 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. Performance is required to comply strictly with specified drawings, including REV_E of drawing 5641754, and all applicable military standards such as MIL-STD-130 for marking, MIL-STD-973 for configuration control, and MIL-STD-2073 for packaging. The contractor must adhere to detailed quality assurance protocols, including self-inspection responsibilities, recordkeeping for 365 days after final delivery, and submission of all engineering change proposals and deviation requests to the designated government office. Delivery is mandated within 90 days, and final acceptance is subject to government inspection under FAR 52.246-2. All contractual documents are deemed issued upon electronic transmission, email, or facsimile, with acceptance of the proposal forming a binding agreement. The solicitation number is N0010426QAB90, with a response deadline of July 6, 2026, and access to technical drawings is available via SAM.gov. The contractor must obtain referenced documents from authorized sources including DODSSP and NAVICP-MECH, with special handling required for NOFORN and Official Use Only materials. The point of contact is Amanda R. Hayward, and payment instructions follow the Wide Area Workflow system, with inspection and acceptance occurring at the source. Compliance with cybersecurity maturity model requirements, child labor certification, and equal opportunity regulations for workers with disabilities is also required, alongside adherence to national defense priority ratings and applicable small business program representations.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Rail Fastening SystemsThis subcontract involves the supply of rail fastening systems and associated accessories for prime contractors working on Maryland Transit Administration light rail projects. The scope of work requires the provision of fasteners and tie anchor systems that are fully compatible with both standard and restraining rail concrete ties, ensuring all materials adhere to MTA and AREMA specifications. The specific deliverable for this contract is the provision of complete rail fastener sets for 1,000 concrete ties. Interested parties must submit their responses by November 17, 2026, in accordance with the solicitation posted on October 27, 2026.

Maryland Transit Administration

POSTED

DEADLINE

BABAA Compliant Reclamation Materials SupplierThis subcontract opportunity is for a supplier to provide specialized reclamation materials for prime contractors working on Virginia Department of Energy projects. The required supplies include 1/4 inch and 5/16 inch galvanized steel wire rope, galvanized earth and rock anchors from MacLean Power Systems or an equivalent brand, and certified seed and agricultural limestone. All materials must be delivered directly to the project site located in Blacksburg, Virginia. A critical requirement for this contract is the provision of formal certification ensuring all materials comply with the Build America, Buy America Act. Interested parties must submit their responses by November 2, 2026, to be considered for this procurement under NAICS code 332510.

Virginia Department of Energy

POSTED

DEADLINE

Supplier of Retaining Rings (NSN 5325-01-321-3445)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of T-Bolt ChocksThis subcontract involves the manufacture and supply of 247 T-Bolt Chocks for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier operations. The project requires precision machining and forming to meet Oshkosh Defense LLC part number 3361032 and NSN 5340014799208 specifications. Production must be carried out using CNC lathes and threading machines, ensuring all materials adhere to strict grade and alloy requirements. The contractor is obligated to comply with the Buy American Act and the DLA Master List of Technical and Quality Requirements. Performance of the contract will take place in New Cumberland, Pennsylvania. The procurement falls under NAICS code 332510, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Manufacturer of Headless Straight Pins (Critical Safety Item)This subcontract involves the manufacture of 15 headless straight pins for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining and forming according to NSN 5315-00-182-5721 specifications, with performance taking place in Tracy, California. Due to the nature of the components, the manufacturer must adhere to Air Force Critical Safety Item quality standards and maintain SAE AS9100 or an equivalent aerospace quality management system certification. Additionally, all production must comply with the Berry Amendment and Buy American Act regarding domestic sourcing.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Mounting Brackets (NSN 5340017253800)This subcontract involves the manufacture or procurement of four mounting brackets under NSN 5340017253800 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all items undergo FAA Bare Item Marking per RQ046, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. Strict compliance is required regarding zero-based sampling plans and supply chain traceability as outlined in DLAD Procurement Note C03. Additionally, the provider must meet all requirements of the Buy American Act and NIST SP 800-171. The final deliverable consists of four marked and packaged brackets delivered in accordance with the specified Department of Defense guidelines.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of NSN 5340016806874This subcontract through the Department of Defense DLA Weapons Support Land Supply Chain requires the provision of 100 units of hardware component NSN 5340016806874. The selected vendor is responsible for manufacturing or sourcing the material and ensuring all items are packaged and marked in strict accordance with MIL-STD-2073-1E, RP001, MIL-STD-129, and RQ011 standards. Delivery of the components is required FOB Origin. Eligible bidders must hold Small Business certification and operate under NAICS code 332510. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026. This contract supports prime contractors fulfilling broader DLA supply obligations.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Lever Brackets (NSN 5340016707390)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Mortise Latches (NSN 5340-00-794-0722)This subcontract involves the supply of 64 mortise latches, identified by NSN 5340-00-794-0722, for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The selected provider is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality control standards per MIL-STD-1916 or ASQ H1331 Table 1. All items must be packaged and marked according to MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The final delivery of the 64 packaged and labeled units is designated as FOB Origin, with the place of performance located at Tinker AFB.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Turnlock Fastener Stud Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing and Supply of Clamp Loops (NSN 5340011313132)This subcontract involves the manufacture and supply of 437 Clamp Loops (NSN 5340011313132) for prime contractors supporting the DLA Weapons Support Active Devices Division. The project requires strict adherence to MIL-DTL-85052/1C Revision C and MIL-DTL-85052B Revision B specifications, as well as TDP Rev A Gen 1. All units must be of domestic origin and classified as Critical Application Items, with the supplier maintaining Qualified Products List approval. The contract is managed under NAICS code 332510 for the Department of Defense, with the place of performance located at Robins Air Force Base. Delivery of the 437 units is required on a FOB Origin basis. Interested parties must respond by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract pertains to the procurement of 35 blind rivets identified by NSN 5320-01-034-2843 under solicitation number SPE4A6-26-T-70C2, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on May 25, 2026, with a response deadline of June 2, 2026, indicating a competitive procurement process open to qualified suppliers. The NAICS code 332722 classifies this as a request for manufacturing-related services associated with fasteners and hardware. No specific set-aside provisions are indicated, and the place of performance lacks detailed location information beyond the United States. All contractual obligations are governed by standard federal acquisition procedures, and interested parties must respond through the official DIBBS portal linked in the documentation.

General Info

Procurement of 35 blind rivets, DLA solicitation SPE4A6-26-T-70C2, responses due June 2, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332510 - Hardware Manufacturing

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

RFQ SPEA46-26-T-70C2

19 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedMay 25

Solicitation

Notice updatedJun 3

Response deadline changed from Jun 2, 2026 to Jun 8, 2026. NAICS code added: 332510. The notice description changed. The point of contact changed.

Response DeadlineJun 8

Deadline has passed

Submission Closed

06/08/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Samantha Hopkins

contact@example.gov

+1 (555) 000-0000

Full Description

RIVET,BLIND
RIVET, BLIND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
CRITICAL APPLICATION ITEM
SPE4A6-26-T-70C2
SECTION B
IAW BASIC NON GOVT STD NAS9305
REVISION NR 07 DTD 04/30/2020
PART PIECE NUMBER: P/N NAS9305BNS-5-06
IAW REFERENCE NON GOVT STD NAS1686
REVISION NR 5 DTD 04/30/2026
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016848644 0001 HD 35.000
NSN/MATERIAL:5320010342843
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:BD OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
SPE4A6-26-T-70C2
SECTION B
PR: 7016848644 PRLI: 0001 CONT’D
DLA DISTRIBUTION DEPOT HILL
DDHU CML +1 (555) 000-0000
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:11/15/2026 Original Required Delivery Date:03/05/2027
SPE4A6-26-T-70C2 NSN/Part Number: 5320-01-034-2843 Quantity: 35 HD Purchase Request: 7016848644QTY: 35 Delivery: 165 days ADO