This Solicitation opportunity from Department Of Defense was posted on March 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RIVET, BLIND

Awarded

SPE4A6-26-T-872NFederal

Submission Closed03/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

DIBBS

Supply of Helical Compression Springs (NSN 5360009546010)This subcontract involves the manufacture or procurement of 35 helical compression springs conforming to NSN 5360009546010 for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supplier Opns Engines. The selected provider must possess the necessary spring winding and heat-treating equipment to ensure technical specifications are met. All units must be packaged according to MIL-STD-2073-1E and RP001 standards and marked in accordance with MIL-STD-129. The final deliverables consist of 35 packaged and marked springs to be delivered to the designated destination, with performance based in Greensboro, North Carolina.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Friction Lining Component Supplier (NSN 3040-12-396-5570)This subcontract involves the supply of seven friction lining units for prime contractors supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN 3040-12-396-5570 and the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. Strict adherence to logistical and security standards is required, including packaging per ASTM D3951 and marking per MIL-STD-129. Additionally, the contractor must maintain compliance with NIST SP 800-171 security protocols. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of PIN-RIVET (NSN 5320011753786)This subcontract involves the manufacture or procurement of 863 specialized PIN-RIVET units, identified by NSN 5320011753786, to support prime contractors under the Defense Logistics Agency Weapons Support ASC Commodities Division. All hardware must be produced in strict accordance with RA001 technical and quality requirements, with shipment and storage marking performed according to MIL-STD-129 standards. The contract falls under NAICS code 332510 and specifies Jacksonville, Florida, as the place of performance. Interested parties must adhere to the timeline established by the Department of Defense, with a response deadline set for November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Annular Ball Bearings (NSN 3110-00-155-6302)This subcontract involves the supply of 52 precision-engineered annular ball bearings, identified by NSN 3110-00-155-6302, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The bearings must be manufactured or sourced in strict accordance with TDP Rev B Gen 2 and MIL-DTL-197M standards. To ensure quality and compliance, the contract explicitly prohibits the use of additive manufacturing, requiring traditional manufacturing processes instead. The selected provider must possess a valid CAGE code and UEI to be eligible. All units must adhere to the special packaging requirements outlined in Section 4 of the military specifications. Performance for this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Mounting Brackets (NSN 5340015311486)This subcontract involves the manufacture or procurement of mounting brackets under NSN 5340015311486 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider is responsible for ensuring all brackets meet strict technical specifications, with marking and packaging performed according to MIL-STD-129. Logistics are managed through the First Destination Transportation program, with the place of performance located in Fort Bliss, Texas. Compliance is a critical component of this agreement, requiring adherence to DFARS 252.204-7012 and NIST SP 800-171 standards for data security. The contract falls under NAICS code 332510 and requires the delivery of mounting brackets that are properly marked and packaged for Department of Defense use.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Precision Shims (NSN 5365-01-040-5274)This subcontract involves the supply of 1,054 precision shims, identified by NSN 5365-01-040-5274, to support prime contractors fulfilling DLA supply contracts. The Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires these parts to be manufactured or sourced in strict accordance with all associated technical specifications. Notably, the use of additive manufacturing for the production of these items is strictly prohibited. The contract specifies that delivery of the units will be handled FOB Origin, with the place of performance located in Phoenix, Arizona. Interested parties should note the response deadline of November 6, 2026, and the classification of the work under NAICS code 332510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Retaining Ring Supply (NSN 5325002813608)This subcontract involves the manufacture or procurement of 222 retaining rings, part number 6763940, for the DLA Weapons Support Nuclear Reactor Program. The supplier must ensure all units meet the technical requirements specified in the DLA Master List and comply with the Buy American and Balance of Payments Program standards. Additionally, the contract strictly prohibits the use of mercury in preservation, adhering to IP056 and NAVSEA 5100-003D guidelines. Packaging and marking must be executed in accordance with MIL-STD-2073-1E and MIL-STD-129. The project falls under NAICS code 332510 and is managed by the Department of Defense. Performance for this contract is centered in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Rod Assembly, Adjust (NSN 5410014459008)This subcontract involves the procurement of 71 units of the Rod Assembly, Adjust (NSN 5410014459008) to support prime contractors delivering on DLA Troop Support contracts. The selected provider is responsible for manufacturing or sourcing components that strictly adhere to NSN technical data. Key compliance requirements include following NAVSEA 5100-003D regarding mercury restrictions and maintaining quality control standards as outlined in FAR 52.246-2. The contract mandates that all items be marked according to MIL-STD-129 and packaged in accordance with RP001 DLA requirements. This effort falls under NAICS code 332510 and is associated with the Department of Defense through Construction & Equipment Containers, with the place of performance located in Tracy, California.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Supply of Helical Compression Spring RetainersThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture or sourcing of five helical compression spring retainers, identified by NSN 5340-01-479-3915. The selected provider must ensure all units strictly adhere to technical specifications and follow rigorous military standards for packaging and palletization, specifically MIL-STD-2073-1E and RP001 DLA Packaging Requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510, with performance taking place in New Cumberland. Eligible contractors must possess a valid CAGE Code and UEI registration to participate. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture and Supply of Helical Compression Spring RetainersThis subcontract involves the manufacture and supply of helical compression spring retainers for prime contractors supporting DLA supply contracts. The work requires fabrication according to NSN 5340-01-414-5029 and the DLA Master List of Technical and Quality Requirements, utilizing precision machining and domestic materials that comply with the Berry Amendment. All deliverables must adhere to MIL-STD-129 and MIL-STD-2073-1E standards for marking and packaging, with final delivery terms set as FOB Origin. Managed by the Department of Defense under DLA DIST SAN JOAQUIN, the project falls under NAICS code 332510 and is to be performed in Tracy, California. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.

POSTED

DEADLINE

Supply of Mounting Brackets (NSN 5340016659638)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture or procurement of 1,054 mounting brackets. The parts must match Gentex Corporation part numbers 136-00-0001 and A14567-3, corresponding to NSN 5340016659638. The project is designated as a total small business set-aside under NAICS code 332510, with performance taking place in New Cumberland. The contractor must adhere to strict quality and security standards, including quality control per FAR 52.246-2 and packaging requirements according to MIL-STD-129. Additionally, compliance with DFARS 252.223-7008, DFARS 252.204-7012, and NIST SP 800-171 is mandatory. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Helical Compression Springs (NSN 5360012497800)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days

AI Contract Overview

This contract covers the procurement of 102 units of blind rivets, specifically part number NAS1398D4AB2, in accordance with the referenced drawing 200415485 and specification NAS1398 Revision 11 dated May 31, 2023. The rivets are identified as a critical application item and must meet stringent technical and quality requirements outlined in the Defense Logistics Agency (DLA) master list, including physical identification, marking, packaging, inspection, and acceptance criteria. Sampling and quality control procedures conform to military standards such as MIL-STD-1916 or ASQ H1331, with specific acceptance quality levels for critical, major, and minor attributes. Packaging and marking must also comply with ASTM D3951 and MIL-STD-129, with all non-accepted items requiring government identification removal. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of August 18, 2026, and a final delivery date of November 26, 2026. The contract number SPE4A6-26-T-872N is managed by the ASC Commodities Division under the Department of Defense, with the point of contact provided for coordination. Transportation terms are governed by DLA procedures, and no unit identification marking is mandated by the customer request in accordance with DFARS. Overall, this acquisition emphasizes strict adherence to technical standards, quality assurance, and delivery schedules to ensure compliance for critical aerospace fasteners.

General Info

Procurement of 102 NAS1398D4AB2 blind rivets meeting strict quality, packaging, and delivery requirements.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

Contract Value

$1,504.5

NAICS

332510 - Hardware Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Awardee

DON INDUSTRIAL GROUP LLC

Award Issued Date

05/11/2026, 12:00:00 AM UTC

Documents

SPE4A6-26-T-872N.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedMar 11

Solicitation

AwardedMay 11

Contract was awarded

Submission Closed

03/16/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

SARAH HENDERSON

contact@example.gov

Full Description

RIVET,BLIND
RIVET,BLIND
DRAWING 200415485 NOTES 1 AND 3 APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
SPE4A6-26-T-872N
SECTION B
SPS TECHNOLOGIES, LLC 11815 P/N NAS1398D4AB2
HUCK INTERNATIONAL, INC 17446 P/N NAS1398D4AB2
ALLFAST FASTENING SYSTEMS, LLC 53551 P/N NAS1398D4AB2
NATIONAL AEROSPACE STANDARDS 80205 P/N NAS1398D4AB2
HOWMET GLOBAL FASTENING SYSTEMS INC 92215 P/N NAS1398D4AB2
MONOGRAM AEROSPACE FASTENERS, INC 98524 P/N NAS1398D4AB2
IAW REFERENCE NON GOVT STD NAS1398
REVISION NR 11 DTD 05/31/2023
PART PIECE NUMBER: NAS1398D4AB2
IAW REFERENCE DRAWING NR 98752 200415485
REVISION NR E DTD 01/30/2020
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015602156 0001 EA 102.000
NSN/MATERIAL:5320015038118
DELIVERY (IN DAYS):0159
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:050
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A6-26-T-872N
SECTION B
PR: 7015602156 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:08/18/2026 Original Required Delivery Date:11/26/2026
SPE4A6-26-T-872N NSN/Part Number: 5320-01-503-8118 Quantity: 102 EA Purchase Request: 7015602156QTY: 102 Delivery: 159 days ADO