This Solicitation opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RIVET, BLIND

Closed

SPE4A6-26-T-26GKFederal

Submission Closed09/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

DIBBS

Supply of Clamp, Block (NSN: 5342016858223)

POSTED

DEADLINE

Supply of Lock Pins (NSN 5315005970499)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flat Washers (NSN 5310-00-995-1197)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-26TH

This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 13 turnlock stud assemblies, identified by NSN 5325-00-594-6267. The contract requires a rapid delivery turnaround of 5 days after the order is placed. Performance is centered in Oklahoma City, and the procurement falls under NAICS code 332510. Strict compliance is required regarding cybersecurity and data handling, specifically necessitating CMMC Level 2 certification through a C3PAO and adherence to Covered Defense Information standards. The technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the contractor must follow specific DLA packaging requirements, source approval documentation, and configuration change management protocols for any engineering variances.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-26RJ

This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of 45 fastener snap assemblies under NSN 5325-01-191-3418. Each assembly must include one metallic eyelet (MS27980-8B), one cap snap fastener (MS27980-2B), one stud snap fastener (MS27980-7B), and one socket snap fastener (AN227-7B). The delivery requirement is set for 20 days after the order is placed. The contract is fully competitive and adheres to specific military and federal standards, incorporating DLA master lists for technical and quality requirements. Key compliance mandates include DLA packaging requirements, the removal of government identification from non-accepted supplies, and specific physical item marking. While covered defense information may apply, item unique identification is not required by the service customer. Interested parties must respond by September 11, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

PIN, GROOVED, HEADLESS

Solicitation # SPE4A7-26-T-695J

Solicitation SPE4A7-26-T-695J is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Aviation, for the procurement of eight headless grooved pins identified by NSN 5315-01-417-8548. The requirement is managed under NAICS code 332510, with an original required delivery date of May 25, 2027. Delivery is set for FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging data, MIL-STD-129 for marking, and RP001 for DLA packaging requirements. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements under RA001. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment processing must be conducted electronically through the Wide Area WorkFlow system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

WHEEL, SOLID, METALLIC

Solicitation # SPE7LX-26-U-9815

Solicitation SPE7LX-26-U-9815 is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Department of Defense, specifically the DLA Land and Maritime Strategic Acquisition Program Directorate. The requirement is for the procurement of 56 metallic solid wheels, identified by NSN 5340010635825. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000 dollars, a guaranteed minimum quantity of 8 units, and a minimum delivery order quantity of 14 units. Delivery is expected within 210 days after receipt of the order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to several technical and regulatory standards, including CMMC Level 2 certification and the prohibition of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific attention to special packaging instruction AK10635825. Technical data is subject to ITAR and EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-5309

This contract, identified as SPE7L5-26-T-5309, is a solicitation for the procurement of 322 units of shims, identified by NSN 5365-00-597-5111 and part number 16702313 from Fairbanks Morse, LLC. The order is managed by the Department of Defense Land Supplier Operations Engines, with delivery required within 105 days. The shipment is destined for Arizona Industries for the Blind in Phoenix, Arizona, with a required delivery date of August 14, 2026. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by ISO 9001:2015 standards, and inspection and acceptance will occur at the point of origin. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions. Sampling for quality control must follow MIL-STD-1916 or ASQ H1331 guidelines.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-5310

This contract is for the procurement of 595 lock pins, identified by NSN 5315012977866 and part number 16101188 from Fairbanks Morse, LLC. The order is managed under purchase request 7015050966 with a delivery requirement of 41 days after order. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, as well as palletization requirements per RP001. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA. The required delivery date is set for July 3, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-25XV

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-10U2

Solicitation SPE7L1-26-T-10U2 is a request for quotations issued by the Defense Logistics Agency for the procurement of 46 nonmetallic bumpers, identified by NSN 5340-01-148-8935. This is designated as a critical application item with a non-extendable shelf life of 60 months. The procurement incorporates specific technical and quality requirements, including the prohibition of class I ozone depleting chemicals and adherence to AMS 5513 for metallic components. The required delivery date is February 22, 2027, with a need ship date of January 16, 2027, for delivery to the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates destination inspection and acceptance, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials and shelf-life marking. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Offerors must submit quotes via the DIBBS system by September 21, 2026.

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-70B4

The contract pertains to the procurement of 108 blind rivets with the NSN 5320-00-113-1665, issued under solicitation number SPE4A6-26-T-70B4 by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on May 25, 2026, with a response deadline of June 2, 2026, and falls under the NAICS code 332722, which corresponds to the manufacture of rivets and similar fasteners. There is no set-aside designation applied to this solicitation, indicating it is open to all eligible contractors without preference for small businesses or other categories. The place of performance and official office address details are not specified, though the contracting entity is based in the United States. Interested parties must submit responses through the DIBBS portal using the provided UI link before the deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 4 days

AI Contract Overview

This contract is for the procurement of 100 blind rivets, specifically part number NAS1669-3DL4, identified as a critical application commercial item. The hardware must be manufactured according to the current revisions of NAS1669, NAS1675, and NAS380 standards, with dimensions and tolerances adhering to ASME Y14.5. Quality assurance is governed by strict sampling plans under MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Key logistical requirements include part marking per MIL-STD-130 and packaging in accordance with MIL-STD-2073-1E and DLA requirement RP001. Inspection and acceptance will occur at the origin, with a delivery timeframe of 20 days after the order. The items are to be shipped FOB Origin to the ROKAF LC Consolidated Supply Depot in Daegu, South Korea, with a required delivery date of June 22, 2026.

General Info

Procurement of 100 NAS1669-3DL4 blind rivets for delivery to Daegu, South Korea.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-26GK Request for Quotations

PDF•19 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 2

Solicitation

Response DeadlineSep 10

Deadline has passed

Submission Closed

09/10/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUSA

Contacts

Debra Fowler

contact@example.gov

+1 (555) 000-0000

Full Description

RIVET,BLIND
RIVET, BLIND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
1. NAS1669-3DL4 BLIND RIVET PER AIA/NAS NAS1669 AND PROCUREMENT
SPECIFICATION AIA/NAS NAS1675.
2. PART MARKING IAW MIL-STD-130, METHOD PER SAE AS478. BAG AND TAG.
SPE4A6-26-T-26GK
SECTION B
3. DIMENSIONS AND TOLERANCES PER ASME Y14.5 IN LIEU OF ANSI Y14.5.
CRITICAL APPLICATION ITEM
TDP Rev C Gen 3 IAW BASIC NON GOVT STD NAS1669 REVISION NR 8 DTD 04/30/2019 PART PIECE NUMBER: STD P/N NAS1669-3DL4
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD NAS1675 REVISION NR 7 DTD 07/31/2025 PART PIECE NUMBER:
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD NAS380 REVISION NR 19 DTD 11/30/2025 PART PIECE NUMBER:
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD SAE AS478 REVISION NR R DTD 01/01/2021 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018175680 0001 EA 100.000
NSN/MATERIAL:5320013071771
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:025 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:BL OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
SPE4A6-26-T-26GK
SECTION B
PR: 7018175680 PRLI: 0001 CONT’D
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
DKSH00
ROKAF LC CONSOLIDATED SUPPLY DEPOT
401ST MATERIEL MANAGEMENT SQUADRON
PO BOX 304-130 352 AH-YANG RD
DONG GU DAEGU 41052
KR
MARKFOR
DKSH00
ROKAF LC CONSOLIDATED SUPPLY DEPOT
401ST MATERIEL MANAGEMENT SQUADRON
PO BOX 304-130 352 AH-YANG RD
DONG GU DAEGU 41052
KR
M/F: (TCN) DKSH5V61630135
RDD: A02
PROJ: TP 2
SUPP ADD: DA5KDM SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A31 DIST: N01 ADV: 2D FC: NL
Need Ship Date:00/00/0000 Original Required Delivery Date:06/22/2026
SPE4A6-26-T-26GK NSN/Part Number: 5320-01-307-1771 Quantity: 100 EA Purchase Request: 7018175680QTY: 100 Delivery: 20 days ADO