Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RIVET, BLIND

Active
SPE4A6-26-T-18NCFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 7,782 blind rivets under National Stock Number 5320-01-630-0267. The contract is designated as a total small business set-aside under NAICS code 332722, with the place of performance located at Tinker AFB. The delivery requirement is set for 171 days after the order is placed. The agreement incorporates specific DLA packaging and quality requirements, including the removal of government identification from any non-accepted supplies. Interested parties must adhere to the technical standards outlined in the DLA Master List of Technical and Quality Requirements. The solicitation was posted on August 16, 2026, with a response deadline of August 24, 2026.

General Info

DoD procurement of 7,782 blind rivets for Tinker AFB, small business set-aside.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

SBA

Documents

(1)

Request for Quotations SPE4A6-26-T-18NC

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Christina Pyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RIVET,BLIND
RIVET,BLIND
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 5320-01-630-0267 Quantity: 7,782 EA Purchase Request: 7017912351QTY: 7782 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-18TK
This contract is for the procurement of 23 hexagon head cap screws, identified by NSN 5305016946165 and part number M712040381. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-18TK, with a required delivery date of January 10, 2027, and a delivery window of 170 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-18PW
This solicitation is for the procurement of 18 close tolerance screws, identified by NSN 5305-00-229-0264 and part number 3M123-3-9. The contract is issued by the Department of Defense ASC Commodities Division with a delivery requirement of 20 days after receipt of order. Performance is designated for Mountain Home AFB. The procurement is subject to specific DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies and strict bare item marking. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling methods, emphasizing zero-based sampling plans for acceptance. Approved sources for this part include SPS Technologies, Huck Intl Inc, Hi-Shear Corp, Fairchild Industries Inc, and Fastener Innovation Technology Inc.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIVET
Solicitation # SPE4A6-26-T-18QV
This solicitation, issued by the ASC Commodities Division of the Department of Defense under solicitation number SPE4A6-26-T-18QV, is for the procurement of two plain blind rivet nuts, identified by NSN 5310-01-576-8217. The contract requires delivery within 20 days after receipt of the order, with the place of performance located in Madison, ZIP code 53704-6290. The procurement is subject to specific DLA technical and quality requirements, including RP001 for packaging and RQ011 regarding the removal of government identification from non-accepted supplies. Interested parties must adhere to the master list of technical requirements effective as of the solicitation or award date. The response deadline for this requirement is August 25, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-18RH
This contract is for the procurement of 15 units of machine screws, identified as NSN 5305002063706 and part number NAS517-3-22. The item is classified as a commercial critical application item and must adhere to technical specifications including NAS517 Revision 8 and specific quality assurance provisions. Delivery is required within 170 days, with a need ship date of February 12, 2027, and a final required delivery date of July 16, 2027. The shipment is destined for DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, marking, and physical identification. Quality conformance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a requirement for zero non-conformances in sample lots. Packaging must comply with ASTM D3951 and MIL-STD-129, and the contractor is required to provide a Certificate of Quality Compliance. Inspection and acceptance will take place at the point of origin.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEY
Solicitation # SPE4A6-26-T-18PX
This contract is for the procurement of four key washers, identified by NSN 5310-00-531-0662 and part number MS172281. The order is issued by the Department of Defense ASC Commodities Division with a required delivery timeframe of 20 days after order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically Davis Monthan AFB in Arizona. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards, MIL-STD-129 marking, and specific sampling methods such as MIL-STD-1916 or ASQ H1331. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds to the hardware. Shipping must be conducted via traceable means, and the contractor must comply with all specified packaging and palletization requirements.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-977E
This contract, identified as SPE7L1-26-T-977E, is a solicitation for the procurement of one mounting bracket, part number 3661A091 by Perkins Engines Inc, under NSN 5340016166868. The delivery is required within five days after the order, with a required delivery date of August 14, 2026. The shipment is designated as FOB Origin, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. It explicitly prohibits the use of Class I ozone-depleting chemicals in the production of the items. The goods are to be shipped to the Reparable Issue Point at Camp Kinser, Japan, and the contract incorporates standard technical and quality requirements as defined in the DLA Master List.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-18QY
This contract is for the procurement of one socket head cap screw, identified by NSN 5305016880206 and part number AES18U250375DG5LE1. The item must adhere to ASME B18.3 Revision NR standards and comply with DLA master lists for technical and quality requirements, including specific mandates for physical identification, measuring and test equipment, and the removal of government identification from non-accepted supplies. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331. Delivery is required within 10 days, with shipping set as FOB Origin to Fort Bragg, North Carolina. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization adhering to DLA requirement RP001. The solicitation is issued by the ASC Commodities Division of the Department of Defense under solicitation number SPE4A6-26-T-18QY, with an original required delivery date of August 11, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-18TC
This contract is for the procurement of 15 hexagon head cap screws, identified by NSN 5305-01-694-6167 and part number PAAC001936. The order is issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-18TC, with a required delivery date of February 13, 2027, and a delivery timeframe of 170 days. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be conducted at the destination using sampling methods aligned with MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-18RV
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 499 shear bolts under NSN 5306-00-803-0919. The contract is open for full competition based on military and federal specifications, with a delivery requirement of 170 days after the order is placed. The place of performance is designated as Jacksonville, Florida, and the procurement falls under NAICS code 332722. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards, tailored higher-level quality requirements, and inspection and acceptance at origin. It specifically notes that Item Unique Identification is not required per the service customer's request. Compliance with covered defense information and specific marking and identification protocols is mandatory, and all measuring and test equipment must meet established standards.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-18QU
This contract is for the procurement of 169 blind rivets, identified as a commercial off the shelf critical application item with NSN 5320017242668 and part number CR3853-4-6 from SPS Technologies, LLC. The order requires strict adherence to FAA airworthiness approval and bare item marking requirements, including the provision of a Certificate of Airworthiness and Conformance. Delivery is set for 133 days after the order, with a required delivery date of January 6, 2027, shipping FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates rigorous quality and sampling standards based on MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. Key compliance requirements include supply chain traceability documentation per DLA Directive C03 and packaging and marking standards according to MIL-STD-129 and MIL-STD-2073-1E. The contract specifies a zero percent quantity variance and designates the inspection and acceptance points at the destination.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-18QE
This contract is for the procurement of 10 hexagon head cap screws under solicitation number SPE4A6-26-T-18QE for the Department of Defense. The items must adhere to MIL-DTL-1222 Type 1 Grade 5 Class 2A specifications, featuring a 0.500 inch 13UNC-2A thread with a minimum length of 6.820 inches and a maximum of 7.000 inches. Material and plating must comply with ASME B18.2.1 Type 1 and ASTM B633 Type 2 standards. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards per ASTM D3951 and MIL-STD-129, and sampling methods based on MIL-STD-1916 or ASQ H1331. Delivery is required within 5 days after order, with the shipping destination being the Portsmouth Naval Shipyard. Inspection and acceptance will occur at the destination, and the contract mandates a zero percent quantity variance.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-18RN
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-18RN, is for the procurement of 3,899 shear bolts, part number NAS6605-6. The items must be manufactured in accordance with AIA/NAS NAS6603-6620 and procurement specification AIA/NAS NAS4002, with dimensions and tolerances adhering to ASME Y14.5. Delivery is required within 170 days after the order is placed, and the place of performance is located in San Diego, California. The contract includes strict compliance requirements for part marking per MIL-STD-130 and SAE AS478, utilizing a bag and tag method. It incorporates several DLA master list technical and quality requirements, including specific standards for packaging, measuring and test equipment, and inspection and acceptance at origin. While physical identification and bare item marking are required, item unique identification is not necessary per the service customer's request.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561990
New
DIBBS
Hazard Warning Labeling & Compliance ServicesThe Hazard Warning Labeling and Compliance Services subcontract is issued by the Department of Defense under the ASC Commodities Division. This contract focuses on the application of hazard warning labels to ensure materials and components are handled safely and in full compliance with DFARS 252.223-7001 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561990. It was posted on August 17, 2026, with a response deadline of September 17, 2026. Interested parties can find further details through the DIBBS portal using the provided solicitation link.
All Other Support Services

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Management & DPAS Compliance CoordinationThis subcontract opportunity, titled Supply Chain Management & DPAS Compliance Coordination, is issued by the Department of Defense under the ASC Commodities Division. The primary objective of the contract is to manage material sourcing and supplier coordination while ensuring strict adherence to Defense Priorities System (DPAS) rating compliance to prioritize fulfillment for national defense requirements. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 541611. Interested parties must submit their responses by September 17, 2026, following the posting date of August 17, 2026.
Administrative Management and General Management Consulting Services

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
Defense-Grade Packaging & Marking ServicesThe Defense-Grade Packaging and Marking Services subcontract, issued by the Department of Defense ASC Commodities Division, requires the professional packaging of bearing units in strict accordance with ASTM D3951 standards. The scope of work includes the application of moisture barrier bags and desiccants to ensure product integrity, as well as comprehensive labeling and Unique Identification marking as mandated by MIL-STD-130. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 339113. The solicitation was posted on August 17, 2026, with a response deadline of September 17, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) & Quality Certification ServicesThis subcontract opportunity, titled First Article Testing (FAT) and Quality Certification Services, is issued by the Department of Defense under the ASC Commodities Division. The primary objective of the contract is to perform independent testing and documentation of the first production unit to ensure full conformance with technical specifications before proceeding to full-scale production. The solicitation was posted on August 17, 2026, with a response deadline of September 17, 2026. This is a Total Small Business Set-Aside under FAR 19.5, categorized under NAICS code 541380. Interested parties can find further details through the DIBBS portal using the provided solicitation link.
Testing Laboratories and Services

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332991
New
DIBBS
Precision Bearing Unit ManufacturingThe Precision Bearing Unit Manufacturing subcontract, issued by the Department of Defense ASC Commodities Division, requires the full production of 450 plain bearing units. The scope of work encompasses all materials, machining, finishing, and packaging, with a strict requirement for compliance with Government First Article Test specifications. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332991. The solicitation was posted on August 17, 2026, and the deadline for responses is September 17, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-18TL
This contract is for the procurement of red electrical insulation tape under solicitation SPE4A6-26-T-18TL for the Department of Defense. The requirement is for two rolls of tape, each measuring 1 inch in width, 0.0100 inches in thickness, and 27 yards in length, conforming to specification A-A-59163B. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 20 days after the order, with FOB origin terms and inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-1916 for sampling, MIL-STD-129 for marking, and DLA packaging requirements. Additionally, the contract mandates compliance with CMMC Level 2 self-assessment and covered defense information regulations.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWER, E
Solicitation # SPE4A6-26-T-18QM
This contract is for the procurement of one electrical power cable assembly, identified by NSN 6150-01-729-6259, for the Department of Defense under the ASC Commodities Division. The delivery is required within 20 days after receipt of order, with the place of performance located at Camp Pendleton. The solicitation is managed by the Defense Logistics Agency and requires strict adherence to physical identification marking and the removal of government identification from non-accepted supplies. Quality assurance is governed by zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed DLA export-control training.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-17XU
This contract is for the procurement of 54 blind rivets, identified as NSN 5320-01-045-3010 and part number NAS1921B04-06. The items are classified as commercial critical application items and must be manufactured according to the current revision of the applicable part standard. Quality assurance is governed by specific DLA technical and quality requirements, including zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and identification marking must comply with MIL-STD-130N. Delivery is required within 171 days, with a need ship date of February 12, 2027. The items are to be delivered FOB Origin to DLA Distribution Jacksonville, Florida. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-18SE
This contract is for the procurement of 63 annular ball bearings, identified as a critical application item. The order specifies Honeywell International Inc. and New Hampshire Ball Bearings Inc. as approved sources for part number 74346. Delivery is required within 397 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the origin. The agreement is subject to strict technical and quality requirements, including DLA master list standards, International Traffic in Arms Regulations (ITAR) for export control, and specific distribution statements for technical drawings. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-DTL-197M. Additionally, the contractor must adhere to restrictions on ozone-depleting substances and ensure all measuring and test equipment meets specified standards.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFR
Solicitation # SPE4A6-26-T-18QZ
This solicitation is for the procurement of 16 airframe roller bearings under contract number SPE4A6-26-T-18QZ for the Department of Defense. The items must conform to the specified technical drawings and adhere to strict domestic sourcing restrictions. Specifically, the bearings must be manufactured in the United States or Canada, and more than 50 percent of the total cost of the bearing components must originate from these regions. Contractors are required to submit a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. The contract includes several critical compliance requirements, including CMMC Level 2 certification and adherence to export control regulations under ITAR and EAR. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Delivery is required within 170 days after the order is placed. Failure to provide the necessary sourcing declarations or meet the quality and packaging requirements set by the DLA may result in the disqualification of the quote.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-18RT
This solicitation, issued by the Department of Defense ASC Commodities Division under contract number SPE4A6-26-T-18RT, is for the procurement of 135 sleeve bushings, identified by NSN 3120-01-166-4435. The required delivery timeframe is 74 days after the order date. Due to the nature of the item, manufacturing may require specific casting or forging and associated tooling, which the government may not provide. The contract is subject to stringent regulatory and quality standards, including CMMC Level 2 certification and adherence to DLA master technical and quality requirements. Because the technical data is subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD export-control training to access the data. Additional requirements include physical item marking, specific DLA packaging standards, and inspection and acceptance at the point of origin.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details