Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RIVET, BLIND

Active
SPE4A6-26-T-17XUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 54 blind rivets, identified as NSN 5320-01-045-3010 and part number NAS1921B04-06. The items are classified as commercial critical application items and must be manufactured according to the current revision of the applicable part standard. Quality assurance is governed by specific DLA technical and quality requirements, including zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and identification marking must comply with MIL-STD-130N. Delivery is required within 171 days, with a need ship date of February 12, 2027. The items are to be delivered FOB Origin to DLA Distribution Jacksonville, Florida. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination.

General Info

Procurement of 54 blind rivets for DLA Jacksonville by February 12, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-17XU.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Christopher Montgomery
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RIVET,BLIND
RIVET, BLIND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
SPE4A6-26-T-17XU
SECTION B
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD NAS1921 REVISION NR 10 DTD 05/31/2026 PART PIECE NUMBER: NAS1921B04-06
TDP Rev B Gen 2 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017914364 0001 EA 54.000
NSN/MATERIAL:5320010453010
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
SPE4A6-26-T-17XU
SECTION B
PR: 7017914364 PRLI: 0001 CONT’D
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN 904-661-5135
JACKSONVILLE FL 32212-0103
US
Need Ship Date:02/12/2027 Original Required Delivery Date:12/20/2026
SPE4A6-26-T-17XU NSN/Part Number: 5320-01-045-3010 Quantity: 54 EA Purchase Request: 7017914364QTY: 54 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
BUSHING, NONMETALLIC
Solicitation # SPE4A7-26-T-669A
This contract is for the procurement of 19 nonmetallic bushings, identified by NSN 5365015034468 and part numbers 21719 and NV 00002 Rev H from Howden American Fan Company. The order is managed under solicitation SPE4A7-26-T-669A with a delivery timeline of 165 days after order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Sampling must follow MIL-STD-1916 or ASQ H1331, emphasizing a zero-based sampling plan for acceptance. Notably, the material has no shelf life requirement, and the use of mercury or mercury compounds in packaging is prohibited. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING ASSEMBLY
Solicitation # SPE4A7-26-T-669L
This contract is for the procurement of 75 units of Ring Assembly, identified by NSN 5365011333615 and part number SP2307-5. The delivery is required within 20 days after order, with a final required delivery date of August 11, 2026. The items are to be delivered FOB destination to the USS George Washington CVN 73. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional requirements approved by NAVSEA.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
DOOR, ACCESS, UTILITY
Solicitation # SPE7L1-26-T-977Y
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-977Y, is for the procurement of 37 utility access door covers, identified by NSN 5340-01-438-8908. The contract requires delivery within 121 days after the order date and is categorized under NAICS code 332510. Performance is centered in New Cumberland, Pennsylvania. The agreement mandates strict adherence to several regulatory and technical standards, including CMMC Level 2 certification for third-party assessment and compliance with DLA packaging and quality requirements. It prohibits the use of Class I ozone-depleting chemicals and enforces rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors who have completed the necessary JCP certification and DLA export-control training.
LAND SUPPLY CHAIN

POSTED

41 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLEVIS, ROD END
Solicitation # SPE7L1-26-T-976X
This contract is for the procurement of two rod end clevises, identified by NSN 5340-01-718-0437 and part number 000963-239 from Hydraulics International, Inc. The order is designated as a critical application item and is managed under solicitation SPE7L1-26-T-976X by the Department of Defense Land Supply Chain. Delivery is required within five days of order, with a final required delivery date of August 14, 2026. The agreement specifies that shipping must be handled via the fastest traceable means to the Commanding Officer NDLO MEB in Stjoerdal, Norway, explicitly prohibiting the use of parcel post. Compliance with DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking is mandatory. Inspection and acceptance will take place at the destination, with shipping terms set as FOB Origin.
LAND SUPPLY CHAIN

POSTED

41 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-978A
This solicitation, identified as SPE7L1-26-T-978A, is issued by the Department of Defense Land Supply Chain for the procurement of 100 loop clamps under NSN 5340-01-632-1980. The contract requires delivery within 50 days after receipt of the order and is categorized under NAICS code 332510. Performance is designated for Cherry Point. The agreement mandates strict adherence to cybersecurity and export control standards, including CMMC Level 2 certification and compliance with ITAR and EAR regulations. Contractors must follow DLA packaging requirements and ensure that no class I ozone-depleting chemicals are used in the items. Access to technical data is restricted to approved entities with valid US/Canada Joint Certification Program certification and completed export-control training.
LAND SUPPLY CHAIN

POSTED

41 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A1-26-T-2612
This contract is for the procurement of 10 turnlock fastener studs, identified by NSN 5325-01-191-3285 and Howmet Global Fastening Systems part number 39S08-2-1AA. The order is designated as a critical application item and must be delivered FOB Origin to the AWCF SSF Camp Carroll facility in Waegwan, South Korea, within 10 days after receipt of the order. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, with palletization following RP001 requirements. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract also incorporates technical and quality requirements via the DLA Master List and requires specific documentation for source approval requests.
AVIATION SUPPLY CHAIN

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BOOT, DUST AND MOISTURE
Solicitation # SPE7L1-26-T-977X
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 37 dust and moisture seal boots under part number 5340-00-164-6702. The contract is categorized under NAICS code 332510 and requires delivery within 28 days after the order is placed. Performance for this contract is located in New Cumberland, Pennsylvania. The agreement is subject to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from any non-accepted supplies. Interested parties must respond by August 28, 2026, and can coordinate with the primary point of contact, Michael Nordahl, regarding solicitation number SPE7L1-26-T-977X.
LAND SUPPLY CHAIN

POSTED

41 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, GROOVED, HEADLESS
Solicitation # SPE7M2-26-U-0345
This contract, identified as solicitation SPE7M2-26-U-0345, is for the procurement of 22 headless grooved pins, part number BBP-1039-VH, with NSN 5315-01-412-6718. The requirement is issued by the Department of Defense Nuclear Reactor Program under NAICS code 332510. Delivery is required within 116 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, while prohibiting the use of mercury or mercury compounds in preservation and packaging. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for configuration change management and the removal of government identification from non-accepted supplies.
NUCLEAR REACTOR PROGRAM

POSTED

41 minutes ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-977S
This contract is for the procurement of one spring tension clip, identified by NSN 5340998130522 and Perkins Engines Co Ltd part number 2481D456. The solicitation, numbered SPE7L1-26-T-977S, is issued by the Department of Defense Land Supply Chain. Delivery is required within five days after the order, with a required delivery date of August 14, 2026. The shipment is designated as FOB Origin, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically referencing MIL-STD-2073-1E and MIL-STD-129. It also incorporates technical and quality requirements via the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies. The item is to be shipped to the Distribution Management Office and Reparable Issue Point at Camp Kinser, Japan.
LAND SUPPLY CHAIN

POSTED

41 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-18SX
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 44 threaded pin-rivets under NSN 5320-01-062-6499. The contract requires delivery within 170 days after the order is placed, with performance located at Tinker AFB. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for source approval requests, packaging, and configuration change management. Strict compliance is required regarding cybersecurity and data protection, specifically CMMC Level 2 certification and the handling of covered defense information. Furthermore, the technical data associated with this item is subject to ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.
ASC COMMODITIES DIVISION

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-668S
This contract is for the procurement of three sleeve spacers under solicitation number SPE4A7-26-T-668S, identified by NSN 5365010577101. The items are designated as critical application items and are associated with part number 3833145-1 from Lockheed Martin Corporation and Parker-Hannifin Corporation. Delivery is required within five days of order, with the point of inspection and acceptance set at the origin. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The goods are to be shipped via G&B Packing Company to the Government of Israel Ministry of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-18QD
This contract is for the procurement of four quick release pins with a passivated finish, identified by NSN 5315-00-883-2968 and part number MS17986C516. The items must be manufactured according to the current revision of the applicable non-government standard NASM17986. Quality assurance and sampling will be conducted per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Delivery is required within 20 days of order, with a final required delivery date of August 11, 2026. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The items are to be shipped via traceable means to the specified freight address at Lewis McChord, Washington.
ASC COMMODITIES DIVISION

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561990
New
DIBBS
Hazard Warning Labeling & Compliance ServicesThe Hazard Warning Labeling and Compliance Services subcontract is issued by the Department of Defense under the ASC Commodities Division. This contract focuses on the application of hazard warning labels to ensure materials and components are handled safely and in full compliance with DFARS 252.223-7001 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561990. It was posted on August 17, 2026, with a response deadline of September 17, 2026. Interested parties can find further details through the DIBBS portal using the provided solicitation link.
All Other Support Services

POSTED

41 minutes ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Management & DPAS Compliance CoordinationThis subcontract opportunity, titled Supply Chain Management & DPAS Compliance Coordination, is issued by the Department of Defense under the ASC Commodities Division. The primary objective of the contract is to manage material sourcing and supplier coordination while ensuring strict adherence to Defense Priorities System (DPAS) rating compliance to prioritize fulfillment for national defense requirements. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 541611. Interested parties must submit their responses by September 17, 2026, following the posting date of August 17, 2026.
Administrative Management and General Management Consulting Services

POSTED

41 minutes ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
Defense-Grade Packaging & Marking ServicesThe Defense-Grade Packaging and Marking Services subcontract, issued by the Department of Defense ASC Commodities Division, requires the professional packaging of bearing units in strict accordance with ASTM D3951 standards. The scope of work includes the application of moisture barrier bags and desiccants to ensure product integrity, as well as comprehensive labeling and Unique Identification marking as mandated by MIL-STD-130. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 339113. The solicitation was posted on August 17, 2026, with a response deadline of September 17, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

41 minutes ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) & Quality Certification ServicesThis subcontract opportunity, titled First Article Testing (FAT) and Quality Certification Services, is issued by the Department of Defense under the ASC Commodities Division. The primary objective of the contract is to perform independent testing and documentation of the first production unit to ensure full conformance with technical specifications before proceeding to full-scale production. The solicitation was posted on August 17, 2026, with a response deadline of September 17, 2026. This is a Total Small Business Set-Aside under FAR 19.5, categorized under NAICS code 541380. Interested parties can find further details through the DIBBS portal using the provided solicitation link.
Testing Laboratories and Services

POSTED

41 minutes ago

DEADLINE

in about 1 month
View Details
NAICS: 332991
New
DIBBS
Precision Bearing Unit ManufacturingThe Precision Bearing Unit Manufacturing subcontract, issued by the Department of Defense ASC Commodities Division, requires the full production of 450 plain bearing units. The scope of work encompasses all materials, machining, finishing, and packaging, with a strict requirement for compliance with Government First Article Test specifications. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332991. The solicitation was posted on August 17, 2026, and the deadline for responses is September 17, 2026.
Ball and Roller Bearing Manufacturing

POSTED

41 minutes ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-18TL
This contract is for the procurement of red electrical insulation tape under solicitation SPE4A6-26-T-18TL for the Department of Defense. The requirement is for two rolls of tape, each measuring 1 inch in width, 0.0100 inches in thickness, and 27 yards in length, conforming to specification A-A-59163B. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 20 days after the order, with FOB origin terms and inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-1916 for sampling, MIL-STD-129 for marking, and DLA packaging requirements. Additionally, the contract mandates compliance with CMMC Level 2 self-assessment and covered defense information regulations.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWER, E
Solicitation # SPE4A6-26-T-18QM
This contract is for the procurement of one electrical power cable assembly, identified by NSN 6150-01-729-6259, for the Department of Defense under the ASC Commodities Division. The delivery is required within 20 days after receipt of order, with the place of performance located at Camp Pendleton. The solicitation is managed by the Defense Logistics Agency and requires strict adherence to physical identification marking and the removal of government identification from non-accepted supplies. Quality assurance is governed by zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed DLA export-control training.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-18SE
This contract is for the procurement of 63 annular ball bearings, identified as a critical application item. The order specifies Honeywell International Inc. and New Hampshire Ball Bearings Inc. as approved sources for part number 74346. Delivery is required within 397 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the origin. The agreement is subject to strict technical and quality requirements, including DLA master list standards, International Traffic in Arms Regulations (ITAR) for export control, and specific distribution statements for technical drawings. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-DTL-197M. Additionally, the contractor must adhere to restrictions on ozone-depleting substances and ensure all measuring and test equipment meets specified standards.
Ball and Roller Bearing Manufacturing

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFR
Solicitation # SPE4A6-26-T-18QZ
This solicitation is for the procurement of 16 airframe roller bearings under contract number SPE4A6-26-T-18QZ for the Department of Defense. The items must conform to the specified technical drawings and adhere to strict domestic sourcing restrictions. Specifically, the bearings must be manufactured in the United States or Canada, and more than 50 percent of the total cost of the bearing components must originate from these regions. Contractors are required to submit a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. The contract includes several critical compliance requirements, including CMMC Level 2 certification and adherence to export control regulations under ITAR and EAR. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Delivery is required within 170 days after the order is placed. Failure to provide the necessary sourcing declarations or meet the quality and packaging requirements set by the DLA may result in the disqualification of the quote.
Ball and Roller Bearing Manufacturing

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-18TK
This contract is for the procurement of 23 hexagon head cap screws, identified by NSN 5305016946165 and part number M712040381. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-18TK, with a required delivery date of January 10, 2027, and a delivery window of 170 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-18RT
This solicitation, issued by the Department of Defense ASC Commodities Division under contract number SPE4A6-26-T-18RT, is for the procurement of 135 sleeve bushings, identified by NSN 3120-01-166-4435. The required delivery timeframe is 74 days after the order date. Due to the nature of the item, manufacturing may require specific casting or forging and associated tooling, which the government may not provide. The contract is subject to stringent regulatory and quality standards, including CMMC Level 2 certification and adherence to DLA master technical and quality requirements. Because the technical data is subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD export-control training to access the data. Additional requirements include physical item marking, specific DLA packaging standards, and inspection and acceptance at the point of origin.
Ball and Roller Bearing Manufacturing

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-18PW
This solicitation is for the procurement of 18 close tolerance screws, identified by NSN 5305-00-229-0264 and part number 3M123-3-9. The contract is issued by the Department of Defense ASC Commodities Division with a delivery requirement of 20 days after receipt of order. Performance is designated for Mountain Home AFB. The procurement is subject to specific DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies and strict bare item marking. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling methods, emphasizing zero-based sampling plans for acceptance. Approved sources for this part include SPS Technologies, Huck Intl Inc, Hi-Shear Corp, Fairchild Industries Inc, and Fastener Innovation Technology Inc.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

41 minutes ago

DEADLINE

in 8 days
View Details