Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RIVET, BLIND

Active
SPE4A6-26-T-07JLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 240 blind rivets identified by NSN 5320-01-476-4786 and part number NAS1921C05S02U, classified as a commercial item and a critical application item. The rivets must be manufactured in accordance with the current revision of the non-government standard NAS1921 Revision 10 dated 05/31/2026, and referenced against NAS1900 Revision 6 dated 03/29/2019, with past manufacturing revisions acceptable only if they were current at the time of production. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards, including MIL-STD-1916 or ASQ H1331 for sampling, requiring zero non-conformances unless otherwise specified. Inspection and acceptance occur at origin, with no variance allowed in quantity, and delivery is required within 169 days of contract award, FOB origin. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA packaging requirements, ensuring all government identification is removed from non-accepted supplies and bare items are physically marked. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 10, 2027, and original delivery deadline of February 17, 2027. The contract is issued under solicitation SPE4A6-26-T-07JL, with a unit price of $0.00 per unit and no total price listed, indicating the line item is for future pricing or cost analysis, and the point of contact is Ericka Mosley of the Department of Defense, ASC Commodities Division.

General Info

240 NAS1921C05S02U rivets, FOB origin, delivery by Feb 17, 2027, to New Cumberland, PA, per DLA specs.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07JL for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ericka Mosley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RIVET,BLIND
RIVET,BLIND
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
SPE4A6-26-T-07JL
SECTION B
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD NAS1921 REVISION NR 10 DTD 05/31/2026 PART PIECE NUMBER: P/N NAS1921C05S02U
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD NAS1900 REVISION NR 6 DTD 03/29/2019 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486474 0001 EA 240.000
NSN/MATERIAL:5320014764786
DELIVERY (IN DAYS):0169
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE4A6-26-T-07JL
SECTION B
PR: 7017486474 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/10/2027 Original Required Delivery Date:02/17/2027
SPE4A6-26-T-07JL NSN/Part Number: 5320-01-476-4786 Quantity: 240 EA Purchase Request: 7017486474QTY: 240 Delivery: 169 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
GRIP, HANDLEThe contract pertains to the procurement of one unit of a GRIP, HANDLE with NSN 5340016110698 under solicitation SPE7L1-26-T-846T issued by the Defense Logistics Agency, Land Supply Chain. Delivery is required within 451 days after receipt of order, with an original required delivery date of October 14, 2026, and a need ship date of October 22, 2027. All items must be delivered FOB origin to the designated receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. The unit of issue is each, and no quantity variance is permitted. The item is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i), but physical marking per RQ017 is required. Packaging must comply with DLA RP001 and MIL-STD-129 for labeling and barcoding, using Code 39 or PDF417 symbology; non-hazardous items must be commercially packaged per ASTM D3951, while hazardous items must adhere to FED-STD-313 and TQ Requirement IP025, with hazard labels conforming to OSHA’s Hazard Communication Standard. The DLA Master List of Technical and Quality Requirements supersedes all other standards. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Configuration changes must be managed via Engineering Change Proposals or variance requests per RQ002, and government identification must be removed from non-accepted supplies per RQ011. The contract incorporates numerous FAR and DFARS clauses including cybersecurity safeguarding, prohibition of hexavalent chromium, trafficking in persons, employment eligibility verification, sustainable products, electronic invoicing via WAWF, and restrictions on contracting with Chinese military companies. Clauses governing changes and subcontracting include deviations authorized under deviation code 2026-00038. Invoicing is mandatory through WAWF, and the offeror must possess a UEI and CAGE code. The
LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVETOfferors bidding on solicitation SPE4A6-26-T-07KQ for PIN-RIVET NSN 5320-01-389-4097 must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds now at $150,000, and must disclose any non-domestic materials in writing. The use of additive manufacturing for parts is prohibited unless specifically approved in advance, and any offer containing such items will be disqualified. Quotes must include quantity ranges due to fluctuating demand, as fixed quantities hinder procurement flexibility, though this does not apply to Auto IDC. All offerors must affirm they will not provide covered telecommunications equipment or services per FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required certifications under FAR provisions 52.212-3 and 52.219-1 for specific small business categories. Access to the Vendor Shipment Module is transitioning to mandatory registration via DLA’s AMPS system, with no exceptions—contractors using VSM WebServices must update their internal schema by the specified deadline or lose shipping capabilities, while online users are unaffected. An anticipated quote submission via DIBBS with a “No Bid” type is strongly encouraged if quoting after the deadline to avoid administrative confusion and ensure visibility to buyers. Fast Pay is not available for this solicitation. The point of contact is Summer Allen, and performance is required at Tinker AFB with a 169-day delivery timeline.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
LATCH, RIMThe contract is for the procurement of 52 units of a LATCH, RIM with NSN 5340-01-477-5878, sourced under solicitation SPE4A5-26-T-293V, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The item, identified as Boeing P/N 74A120632-2002, is classified as a critical application item and must comply with all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede other standards. Manufacturing and non-manufacturing suppliers must meet tailored and non-tailored higher-level quality requirements including ISO 9001:2015, while packaging must adhere strictly to MIL-STD-129 and DLA Packaging Requirements for Procurement, with hazardous materials handled per FED-STD-313 and TQ requirement IP025, and non-hazardous items packaged per ASTM D3951 unless overridden by DLA requirements. Unit of issue is each (EA), with no quantity variance permitted, and delivery is FOB origin with inspection and acceptance occurring at destination. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. All shipments must be palletized per RP001 and delivered within 169 days to the designated destination in San Diego, California, with the required ship date set for January 10, 2027, and an original delivery deadline of July 18, 2028. Sampling must conform to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise specified. Measuring and test equipment used must meet RT001 standards, and documentation for source approval must be submitted as outlined in RC001. The contract includes detailed labeling and packaging instructions, transportation protocols per DLAD Proc Notes C19 and C20, and the designated point of contact is Jackayla Pendergast with DLA. The total price for the 52 units is based on a unit price of $52.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PLATE, ACTUATOR, MOUNThe contract pertains to the procurement of 12 units of a PLATE, ACTUATOR, MOUN with NSN 5340-13-122-9053, supplied by FN HERSTAL S.A. under part number 3621290670, at a unit price of $12.00 for a total value of $144.00. Delivery is required within 306 days from the solicitation date, with FOB Origin terms, and inspection and acceptance must occur at the destination. The item is classified as a Critical Application Item, and Covered Defense Information applies. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, superseding other standards such as ASTM D3951, and all packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. Hazardous material, if applicable, must meet Fed-Std-313 and TQ requirement IP025; non-hazardous items must be commercially packaged. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval. The items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of May 30, 2027. The contract enforces CMMC Level 2 Self-Assessment compliance, and all technical specifications are governed by the DLA Master List with revisions tied to the solicitation issue or award date. The solicitation number is SPE7L1-26-T-846Z, issued under NAICS code 332510 by the Department of Defense’s Land Supply Chain, with Isabelle Szulewski listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract specifies the procurement of 168 straightheaded pins identified by NSN 5315014639274 and part number MS9468-39, governed by technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. All items must comply with stringent packaging requirements under MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking applied. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking unless explicitly exempted for functional components such as batteries, fluorescent lamps, or specified instruments, which must include a secondary containment and comply with NAVSEA 5100-003D. Sampling and inspection follow zero-defect criteria using MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecifed attributes are treated as major. Inspection and acceptance occur at origin, with delivery required FOB origin within 170 days of contract award, and no quantity variance is permitted. The items are to be delivered to the designated receiving warehouse in Tracy, California, with transportation governed by DLAD Proc Notes C19 and C20. The contract, issued under solicitation SPE4A6-26-T-04TR, is classified as a simplified acquisition, with the applicable revision of the DLA Master List determined by the solicitation issue date. The required delivery date is January 20, 2027, with a need ship date of January 3, 2027, and the point of contact is Debra Fowler of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 4 days
View Details