RIVET, SOLID

The contract specifies the procurement of 910 solid rivets identified by NSN 5320012351225 and part number NAS1241D5-8, manufactured in accordance with the current revision of the non-government standard NAS1241, Revision 4 dated 12/31/2018, and referenced standard NASM5674, Revision 2 dated 10/30/2015. Delivery is required within 228 days after order placement, with FOB Origin terms, meaning title and risk transfer to the government at the contractor's facility. Inspection and acceptance occur at origin under FAR 52.246-2, and the contractor must ensure compliance with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise specified. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Packaging must conform to ASTM D3951 except where overridden by DLA requirements, and all markings must comply with MIL-STD-129 including palletization per RP001. Physical identification of bare items is mandated under RQ017, and government identification must be removed from non-accepted items under RQ011. Hazardous materials must be properly labeled per OSHA’s Hazard Communication Standard and MIL-STD-129, with pre-award submission of labels and MSDS required. Radioactive material notifications are necessary if thresholds are exceeded. The contract permits alternative contract types under FAR 52.216-1 Alternate I, but the specific type remains undetermined. Invoicing must be submitted electronically through WAWF, and the contract includes clauses on cybersecurity safeguarding, trafficking in persons, employment eligibility verification, sustainable products, whistleblower rights, and disclosure of information. The contract has no quantitative value stated due to absent unit pricing, and all submissions must be made through DIBBS with no physical