3.1 Scope: The successful Bidder(s) shall be responsible for providing all robotic mowing equipment and services at the prices specified herein during the term of the agreement to be used on an as needed basis by the District. The performance of the successful Bidder(s) shall be in accordance with the terms of the specifications set forth herein. Failure to comply with these requirements may be cause for Bid rejection or award cancellation.
The School Board of Volusia County, Florida, seeks to implement a robotic mowing service utilizing Kress robotic mowers for its educational facilities and grounds. This innovative approach aims to maintain the landscaping of the school’s properties efficiently and sustainably.
The scope of services includes:
a.) Supply and deployment of Kress robotic mowers across designated locations. The locations are:
• Atlantic High School, 1250 Reed Canal Road, Port Orange, FL. 32129 (8 acres)
• DeLand High School, 800 North Hill Avenue, DeLand, FL. 32724 (8 acres)
• Deltona High School, 100 Wolf Pack Run, Deltona, FL. 32725 (6.8 acres)
• Pine Ridge High School, 926 Howland Boulevard, Deltona, FL. 32738 (8 acres)
• Mainland High School, 1255 W Intl Speedway Boulevard, Daytona Beach, FL. 32114 (10 acres)
• New Smyrna Beach High School, 1015 10th Street, New Smyrna Beach, FL. 32168 (7.5 acres)
• Seabreeze High School, 2700 N. Oleander Avenue, Daytona Beach, FL. 32118 (4.25 acres)
• Spruce Creek High School, 801 Taylor Road, Port Orange, FL. 32127 (8.3 acres)
• T. Dewitt Taylor Middle-High School, 100 E Washington Avenue, Pierson, FL. 32182 (6 acres)
• University High School, 1000 West Rhode Island Avenue, Orange City, FL. 32763 (7 acres)
Kress robotic lawn mowers are advanced, GPS-guided mowers designed for home lawns and commercial applications. They are part of a growing lawn care technology trend emphasizing automation and efficiency. The mower`s Real-Time Kinematic (RTK) GPS technology enhances its navigation and precision, allowing it to maintain consistent lawn cutting with minimal intervention.
b.) Installation
Installation of necessary infrastructure, including charging stations, boundary wires, and any required sensors or beacons to ensure proper mower operation.
Charging Stations:
• The charging station must be centrally located within the mowing area to ensure optimal accessibility for the mower.
• The charging station must be placed on a flat, stable surface not prone to flooding or excessive moisture.
• Connected to a dedicated power supply that matches the mower’s requirements.
• Ensure the power source is equipped with a ground fault circuit interrupter to prevent electrical hazards.
• Secure the charging station to the ground to prevent movement during hazardous weather conditions.
• Ensure that all cables and wires from the charging station to the power source are buried or enclosed in protective conduits to prevent damage and reduce tripping hazards.
• All installations must comply with local building and electrical codes.
• Conduct testing to ensure the charging station provides the mower with a consistent and reliable charge.
Boundary Wires:
• Install boundary wires around the perimeter of the mowing area and any obstacles per the manufacturer’s guidelines.
• Wires must be buried below ground surface and securely fastened to prevent displacement.
Power Supply:
• Provide a dedicated power outlet within the base station’s range, as specified by the manufacturer.
• Ensure all electrical installations are performed and comply with applicable electrical safety standards and codes.
c.) Programming
• Programming and configuration of robotic mowers to operate within designated areas, adhering to predefined schedules and mowing patterns.
• Configuration of initial system settings such as area boundaries and mowing zones.
• Calibrate the mower’s navigation sensors for precise operation.
• Program the mower to detect boundary wires and restrictive zones.
• Ensure the mower can properly detect and dock into the charging station automatically without user intervention.
• Schedule automated mowing times and durations.
• Configure geo-fencing capabilities to restrict mower movement to specific areas.
d.) Maintenance
• Perform regular maintenance, including blade sharpening, battery replacement, and software updates for the robotic mowers.
• Maintain blade maintenance and replacement: Mower blades should be sharpened to prevent uneven mowing and worn, or damaged blades should be replaced as needed.
• Replace batteries that show deterioration or fail to hold a charge.
• Perform firmware updates, software version management, configuration adjustments, and calibration updates.
• Conduct diagnostics reviews to ensure optimal system performance.
e.) Monitoring
• Provide monitoring services to ensure optimal performance with remote diagnostics and troubleshooting capabilities.
• Track battery life and operational status.
• Collection and analysis of key metrics such as mowing area, battery consumption and sensor functionality.
• Perform remote diagnostics, including error codes, system health checks, and error detection.
f.) User-friendly Interface
• Provide a user-friendly interface or mobile application for board staff to monitor mowing progress and adjust schedules as needed.
• Ensure the interface or mobile application is intuitive, allowing customization of mower settings, including mowing schedules and zones.
g.) Training
• Provide training sessions for designated Board personnel on basic operation, maintenance, and troubleshooting of the robotic mowing system.
• Basic operation training: Conduct training sessions to familiarize designated board personnel with the basic operation of the robotic mower, including how to start/stop the mower, set mowing schedules, and monitor real-time performance via the mobile app or interface.
• Maintenance and troubleshooting training: Offer hands-on training on routine maintenance tasks (e.g., blade sharpening, battery replacement, software updates) and troubleshooting common issues (e.g., sensor malfunctions, error codes) to ensure personnel are equipped to address basic operational challenges.
h.) Integration
• Ensure seamless integration with existing landscaping practices, coordinating robotic mowing with other grounds maintenance activities.
i.) Implementation of Safety Features
• Integrate advanced obstacle detection systems to stop or redirect the mower when it detects objects or people in its path, ensuring the safety of students, staff, and property.
• Implement a manual or automatic emergency stop feature that can be triggered remotely or by the mower itself to prevent harm or damage.
j.) Customization
• Provide customizable cutting heights and mowing patterns to accommodate different grass types and landscaping requirements across various Board properties.
k.) Weatherproofing
• Incorporate weatherproofing and durability features to ensure consistent operation in Florida`s climate, including resistance to heat, humidity, and occasional heavy rainfall.
• Utilize waterproofing and weather-resistant materials to protect the mower from heavy rainfall and ensure continuous performance in wet conditions.
l.) Theft Prevention
• Implement theft prevention measures, including GPS tracking and alarm systems for the robotic mowers.
• Integrate GPS tracking systems that allow real-time location monitoring and geofencing capabilities, sending alerts if the mower moves outside a designated area.
m.) Reporting
• Provide detailed reporting capabilities, with insights on mowing frequency, coverage, and energy consumption.
n.) Scalable Solutions
• Offer scalable solutions to accommodate potential expansion to additional Board properties in the future.
o.) Compliance
• Ensure compliance with all relevant local and state regulations regarding automated landscaping equipment and noise ordinances.
• Adhere to safety standards and environmental guidelines for the use of robotic mowers.
p.) Ongoing Technical Support
• Provide ongoing technical support and customer service to address any issues or concerns from staff.
• Offer a ticket-based customer service system with access to resources such as user manuals and maintenance guides.
• Provide on-site support for troubleshooting, system checks, and preventive maintenance ensuring complex issues are addressed by qualified technicians.