Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ROD, ACTUATOR

Active
SPE7M2-26-T-6190Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three ROD, ACTUATOR units under solicitation SPE7M2-26-T-6190, with a delivery deadline of 80 days after order. All supplies must comply with stringent technical and quality requirements outlined in the DLA Master List, including inspection and acceptance at origin, zero-defect sampling per MIL-STD-1916 or ASQ H1331, and strict assignment of verification levels based on attribute criticality. Mercury and mercury-containing compounds are prohibited unless specifically exempted for functional components such as batteries, sensors, or instruments approved by NAVSEA, and any portable devices containing mercury must include dual containment and be shock-proof per NAVSEA 5100-003D. The item must adhere to NAVAIR traceability standards, with bare parts marked with the contract number, NAWC CAGE, and part number unless overridden by technical drawings. Class I ozone-depleting chemicals are explicitly banned, and any alternative chemicals require prior approval. Technical data associated with this item is subject to export control under ITAR or EAR, restricting access to only DLA contractors with approved JCP certification, completed training, and DLA authorization. Compliance with DFARS 252.225-7048 is mandatory, and distribution to foreign persons, including foreign nationals within the U.S., is strictly controlled. Full and open competition applies, and all requirements supersede any conflicting specification clauses.

General Info

Procure three ROD ACTUATOR units under SPE7M2-26-T-6190, deliver in 80 days, comply with strict tech, quality, mercury, ITAR, and DFARS rules.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-6190 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ROD,ACTUATOR
ROD,ACTUATOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH &
RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE
ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA
DRAWINGS PROVIDED.
BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT
NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE
SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT
EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE
ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
SPE7M2-26-T-6190
SECTION B
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1720-00-263-6371 Quantity: 3 EA Purchase Request: 7017779832QTY: 3 Delivery: 80 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M0-26-T-035V
The contract pertains to the procurement of one FILTER ELEMENT, FLUI with NSN 4330-01-651-3611 and part number ACB856F2 manufactured by PALL AEROPOWER CORPORATION. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by the specification. Delivery is required within five days of contract award, delivered FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and methods detailed, including the use of designated wrapping and cushioning materials and palletization per DLA guidelines. Shipping instructions designate Eielson Air Force Base, Alaska, as both the shipping and parcel post address, with transportation governed by DLAD procedure notes C19 and C20. The contract number is SPE7M0-26-T-035V, with a required delivery date of August 7, 2026, and the solicitation response deadline is August 21, 2026. The primary point of contact is Grace Beck at the Department of Defense, and the item falls under NAICS code 333998.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
ADAPTER, FLUID FILTE
Solicitation # SPE7M0-26-T-036A
The contract specifies the procurement of two fluid filter adapters with part number 54-3069 and NSN 4330017063815 under solicitation SPE7M0-26-T-036A, requiring delivery within five days to the shipping address at Newport News Shipbuilding in Hampton, Virginia, with delivery terms FOB origin and no variance allowed in quantity. Strict compliance is mandated with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including specific packaging methods and container codes, while prohibiting parcel post in favor of traceable freight shipping. The item must be free from ozone-depleting chemicals and mercury or mercury-containing compounds, except for limited functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions or RFP date for larger ones. All deliveries must meet destination inspection and acceptance criteria, with the point of contact and detailed procurement data provided for government use.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
BOWL, SEDIMENT
Solicitation # SPE7M1-26-T-270M
The contract pertains to the procurement of six Bowl Sediment (Bowl Assembly Coalescer) units with NSN/Part Number 4330-01-319-8052 under solicitation SPE7M1-26-T-270M, with a response deadline of August 21, 2026, and delivery required within 115 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and all items must be physically marked according to RQ017. The contract invokes RD002 regarding Covered Defense Information and mandates CMMC Level 2 certification by a C3PAO for cybersecurity compliance. Configuration changes require formal engineering change proposals, and non-accepted supplies must have all government identification removed. Technical data associated with the item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location; DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and formal DLA authorization may access such data. The place of performance is Tracy, California 95304-5000, with Michele Davis as the primary point of contact through the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M0-26-T-035T
The contract pertains to the procurement of two fluid filter elements with NSN 4330015918306 under solicitation SPE7M0-26-T-035T, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, with shipment to be delivered FOB destination and no variance allowed in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement RP001. The items are to be delivered to either the Naval Beach Unit Seven at FPO AP 96322 for parcel post or to Sasebo City, Japan for vessel shipment, with transportation governed by DLAD Proc Notes C19 and C20. The contract specifies a unit price for two units and includes government-only fields for logistics tracking. The original required delivery date is August 7, 2026, and the solicitation was posted on August 10, 2026, with a response deadline of August 21, 2026. The primary point of contact is Grace Beck, and the NAICS code is 333998.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M0-26-T-036T
This contract is for the procurement of one filter element, part number 029-26983-000, with NSN 4330-01-731-2860, to be delivered within five days to the PCU TED STEVENS (DDG 128) via DLA Distribution in Norfolk, Virginia. The contract prohibits the use of Class I ozone-depleting chemicals and restricts the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with limited exceptions for functional applications such as batteries, fluorescent lights, sensors, and specific instrument components as defined by NAVSEA. Mercury-containing portable devices must include shock-proof construction and a secondary containment barrier. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129, including special designation ZZ for additional requirements. The item is to be shipped via the fastest traceable means, excluding parcel post, and must meet exact quantity requirements with no variance allowed. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The contract is issued under solicitation SPE7M0-26-T-036T, with a required delivery date of August 6, 2026, and a response deadline of August 21, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
WORK STATION, CLEAN
Solicitation # SPE8EE-26-T-2313
The contract pertains to the procurement of one unit of a WORK STATION, CLEAN with NSN 3694-01-576-3229, under solicitation SPE8EE-26-T-2313, requiring delivery within five days of award at FOB origin. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards under MIL-STD-129, with no special marking codes applied. Packaging must be palletized as specified in RP001, using preservative methods and materials as outlined, and all shipments must use traceable freight methods—parcel post is strictly prohibited. Delivery is directed to the Carrier Outfitting Matl Support Center in Suffolk, VA, with the shipment identified by RDD 777 and project code ZQ0 TP 1. The contract enforces a zero percent quantity variance and requires inspection and acceptance at the destination. Technical and quality requirements are governed by the DLA Master List referenced in RA001, with revisions tied to the solicitation issue date. The contract includes Defense Information provisions under RD003 and specifies the point of contact for inquiries as Philip Ferrara, with the response deadline set for August 21, 2026, and the original delivery requirement set for August 7, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
MODIFICATION KIT, PU
Solicitation # SPE7M0-26-T-035Z
The contract pertains to a Modification Kit, PU with NSN 4310-01-692-9279 and part number 204-24552, for a single unit to be delivered within five days of award. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply strictly with MIL-STD-2073-1E, specifically Appendix D for kits, and marking must follow MIL-STD-129 with no special marking code applied. Preservation and packaging methods are designated as Z, indicating unspecified or not applicable, and the pack code is U. The kit must be palletized in accordance with DLA’s packaging requirements and shipped using the fastest traceable means, explicitly prohibiting parcel post. The delivery destination is the Portsmouth Naval Shipyard in Kittery, ME, with a separate parcel post address listed for reference only. The contract is issued under solicitation SPE7M0-26-T-035Z with a required delivery date of August 7, 2026, and is governed by the DLA Master List of Technical and Quality Requirements referenced in RA001, with revisions controlled by the solicitation issue date. Technical compliance is mandatory, and all requirements take precedence over any general commercial practices. The performing organization is the Department of Defense, under the Maritime Supply Chain ESO B buys office, with primary point of contact Kathleen Hipes. The contract includes government-only administrative codes for internal tracking, including an IPD code of 03 and a DIC of A4A, and the NAICS code 333998 indicates it falls under Other Miscellaneous Manufacturing.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
Federal
Centrifugal Nanoparticle Analyzer, Forest Products Laboratory
Solicitation # 12444626Q0068
A solicitation for a centrifugal nanoparticle analyzer has been issued under solicitation number 12444626Q0068 by the U.S. Department of Agriculture’s Forest Products Laboratory through its office in Atlanta, Georgia. This request, formatted in accordance with FAR Part 12 for commercial items, serves as the sole solicitation document with no separate written solicitation to follow. The acquisition is fully reserved for small business concerns, with the North American Industry Classification System code 333998 and a size standard of 700 employees, allowing all responsible small businesses to submit quotations. An amendment, Amendment 0001, was issued on August 10, 2026, and must be reviewed alongside the original solicitation. Responses must be submitted by 10:00 PM Eastern Time on August 17, 2026, and the equipment will be delivered to Madison, Wisconsin. The primary point of contact for questions is Shad Stoddard, reachable via email at shad.stoddard@usda.gov.
Csa East 7 Usda-Fs

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
SCHIRMER TEAR TEST
Solicitation # SPE2DH-26-T-5867
The Schirmer Tear Test with blue dye wicks is a medical supply item designed to measure tear production in animals, with each unit containing a box of fifty tests. The item is subject to strict packaging and marking requirements under the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all units must be sealed in containers that protect against damage or breakage. Shipping must be accomplished using commercial exterior containers that ensure safe delivery at the lowest possible rate to the designated point of delivery, with export packaging applied when necessary. The item is identified by NSN 6640-01-484-9445 and is being procured under solicitation SPE2DH-26-T-5867, with a delivery requirement of 84 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on the acquisition type. The purchase is for one unit, and all supplies must comply with federal procurement standards including the removal of government identification from non-accepted items. The contracting office is the Medical Supply Chain FSH under the Department of Defense, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
CALIBRATOR, AIR SAMP
Solicitation # SPE2DH-26-T-5866
The contract is for the procurement of two air sampling calibrators, identified by NSN 6640-01-583-9093, under solicitation SPE2DH-26-T-5866, with a response deadline of August 17, 2026, and a delivery requirement of 85 days after award. All units must be packaged in commercial-grade, sealed containers that protect against damage and breakage, and shipped in exterior containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point in APO, ZIP 96260-5479. Packaging and marking must comply strictly with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to provide the source and part number of the equipment being offered. Technical and quality requirements referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all documentation must adhere to DLA’s procurement and packaging policies for medical acquisitions. The purchasing agency is the Department of Defense, Medical Supply Chain FSH, and the point of contact is Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
RESTRICTOR UNIT, FLU
Solicitation # SPE7M3-26-T-8147
The contract is for a single Restrictor Unit, Fluid Flow, with NSN/Part Number 4730-01-535-6415, under solicitation SPE7M3-26-T-8147, issued as a Total Small Business Set-Aside under NAICS code 333998. The item is subject to strict export control regulations under ITAR or EAR, prohibiting any disclosure or transfer of technical data to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is required, and only DLA contractors with approved U.S./Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and authorized access may receive the technical information. The contract mandates adherence to DLA packaging standards, removal of government identification from non-accepted supplies, and incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date. The supplier must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified as a third-party assessment organization and must deliver the item within 165 days of award to New Cumberland, Pennsylvania, with William Cain designated as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-268M
The contract is for the procurement of a filter element identified by part number 45012007 and NSN 4330015446534, with a total quantity of 11 units, each priced at $11.00, under solicitation SPE7M1-26-T-268M. Delivery is required within 165 days from the contract award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines and unit packaging defined by the contract. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, and transportation must follow DLAD Proc Note C19 for shipping and C20 for first destination transport. The original required delivery date is December 13, 2026, with a need ship date of February 2, 2027. The contract falls under NAICS code 333998 and is managed by the Department of Defense’s Maritime Supply Chain. All technical and quality specifications referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 331420
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE7M2-26-T-6196
This contract specifies the procurement of a machine thread plug, identified by NSN 4730-01-732-5637 and part number 6PNTX-SS-QMS from CUSTOM HYDRAULIC & MACHINE, INC., with a quantity of 13 units to be delivered FOB origin within 173 days of contract award. The item is classified as a critical application component and must comply with stringent technical, quality, and packaging standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. No mercury or mercury-containing compounds may be intentionally introduced into the product except for specified functional uses in batteries, lighting, instruments, or weapon systems as authorized by NAVSEA, and any portable devices containing mercury must have shock-proof construction with a secondary containment boundary per NAVSEA 5100-003D. The supplier must adhere to DLA packaging and procurement requirements, including palletization standards, and the item must be delivered to the designated DDSP New Cumberland facility in Pennsylvania with no variance allowed in quantity. The contract prohibits deviations without formal engineering change proposals or variance requests, and all documentation must meet source approval and configuration management protocols. Delivery is required by February 11, 2027, with acceptance occurring at the destination point under inspection requirements.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7M2-26-T-6197
The contract specifies the procurement of 764 units of screw, cap, hexagon head with NSN 5305-01-575-1782 and part number 0.62511UNC2A1.250T1G2SAN, under solicitation SPE7M2-26-T-6197. Deliveries are required within 164 days of contract award, with shipment originating from the supplier and delivered FOB origin to the DLA Distribution Puget Sound facility in Bremerton, WA. All items must comply with MIL-DTL-1222J for surface marking, requiring the material symbol, manufacturer’s symbol listed in MIL-HDBK-57, and lot number directly applied to the screw, with exceptions for items under half an inch in diameter where space constraints apply; unmarked items must have markings on packaging. The item is classified as a critical application item and must conform to MIL-STD-130N for identification marking. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA packaging standards, including preservation method 10, wrap material DA, and cushioning material JC, with marking per MIL-STD-129 and no special marking codes. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and labeling, except for specific exceptions such as batteries, fluorescent lamps, and instrument controls as defined by NAVSEA, with portable fluorescent devices requiring shockproof construction and a secondary containment barrier. The contract stipulates a fixed quantity with zero variance, inspection and acceptance occur at destination, and the delivery must be completed by February 2, 2027, with an original required delivery date of November 6, 2026. The unit price is based on the total contract value, and compliance with all referenced technical and quality requirements listed in the DLA Master List is mandatory.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M2-26-Q-0733
This contract pertains to the procurement of a restricted-source item identified by NSN 5330-00-786-5492, with a quantity of 14 units, under solicitation SPE7M2-26-Q-0733. The item requires engineering source approval by the government design control activity and must comply with stringent packaging, documentation, and traceability standards set forth in DLA’s Master List of Technical and Quality Requirements. All supplies must adhere to prohibitions against ozone-depleting chemicals and intentional use of mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemically specified reagents approved by NAVSEA; portable mercury-containing items must also meet shock-proof and dual-containment standards per NAVSEA 5100-003D. Item markings must include the contract number, NAWC CAGE code, and part number unless overridden by technical drawings, and all bare items must conform to NAVAIR aircraft launch and recovery equipment traceability requirements. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized DLA approval may access this data. Manufacturing and non-manufacturing entities must hold SAE AS9100 accreditation and meet non-destructive testing (NDT) accreditation requirements. Submission of a First Article Testing Report, Production Test and Inspection Report, and Certificate of Quality Compliance is mandatory, with surplus materials deemed unacceptable. Delivery is due 449 days after award, and all technical data and requirements are governed by the solicitation version in effect on the issue date, with updates controlled by any subsequent amendments. The place of performance is San Diego, CA, with Victoria Payne at DLA as the point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M2-26-T-6192
This contract specifies the procurement of an electromagnetic relay under NSN 5945-01-062-5154 with a quantity of 12 units to be delivered FOB origin within 271 days after award, with a required ship date of May 20, 2027 and an original delivery deadline of August 6, 2027. The item must comply with Technical Data Package Rev A Gen 1 per MIL-DTL-5757/1L and MIL-DTL-5757P Sup 1, and is designated as a Critical Application Item listed on a Qualified Products List or Qualified Manufacturers List. Strict prohibitions ban the intentional use of mercury or mercury-containing compounds in any supplied hardware except for functional applications in batteries, fluorescent lights, specified instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, wrapping, and container codes; all units must be marked in accordance with MIL-STD-129, including a special ZZ code and IPC/JEDEC J-STD-609-compliant lead finish markings on each unit package. Inspection and acceptance occur at destination with zero variance allowed in quantity. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, and transportation procedures follow DLAD Proc Notes C19 and C20. The solicitation was issued under SPE7M2-26-T-6192 with a response deadline of August 21, 2026, and is managed by the Department of Defense’s Nuclear Reactor Program, with Alisha Blanton as the primary point of contact.
Relay and Industrial Control Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M2-26-T-6200
This contract is for the procurement of 52 push switches designated by NSN 5930009692683 and associated part numbers from DRS Naval Power Systems Inc and Eaton Corp, categorized as critical application items. The supplies must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific prohibitions against the intentional addition of mercury or mercury-containing compounds unless exempted for functional uses such as batteries, fluorescent lights, instruments, weapon systems, or specified reagents. Mercury-containing portable lamps and instruments must feature shock-proof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The items are subject to inspection and acceptance at the destination, with no tolerance for quantity variance. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-28786, with marking following MIL-STD-129 and no special marking required. Palletization shall conform to DLA packaging requirements, and hazardous materials handling must meet IP025 specifications. Delivery is FOB origin with a required delivery date of April 4, 2027, and a shipment deadline of February 26, 2027. All supplies must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, under the solicitation SPE7M2-26-T-6200, which was issued on August 10, 2026, with responses due by August 21, 2026. The unit of issue is each (EA), at a fixed price of $52.00 per unit.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333515
New
DIBBS
FILE, ROTARY
Solicitation # SPE7M2-26-T-6198
This contract, issued under solicitation SPE7M2-26-T-6198, pertains to the procurement of 2,048 rotary cutting tools identified by NSN 3455-00-311-6182, featuring a 0.250 inch shank, 0.375 inch cutter head diameter, 1.0625 inch cutter head length, and 2.8125 inch overall length with 18 to 24 medium-spaced teeth, conforming to Type II, Style D, Size 4, Class B per CID A-A-51186B, Revision A, General 1. All supplies must comply with DLA packaging requirements as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking, and adhere to ASTM-D-3951 for packaging, with no special marking required. The product must be free of intentionally added mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable fluorescent lamps and instruments requiring shock-resistant design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance is zero non-conformances unless otherwise specified. Delivery is FOB origin with a required delivery date of April 3, 2027, and a need ship date of February 26, 2027, with a 188-day lead time and zero variance in quantity. Inspection and acceptance occur at destination. The item must be shipped to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, in accordance with DLAD Proc Notes C19 and C20 for transportation and freight.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331221
New
DIBBS
SHEET, METAL
Solicitation # SPE7M2-26-T-6191
The contract specifies the procurement of 10 sheets of annealed 304 stainless steel, UNS S30400, with a 2B finish, measuring 36 inches wide, 96 inches long, and 0.050 inch thick, totaling approximately 50.1 pounds per sheet. All material must be supplied in whole-foot increments and conform to ASTM A240/A240M-26, Revision 26. Strict identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer name, heat and lot number, and dimensions, using only stamping or stenciling methods that are legible, waterproof, and non-contaminating. Adhesive labels are mandated for small diameter bars and tubes under 0.250 inches, while tags are acceptable for wire. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special preservation codes ZZ as defined in ASTM A700, and all markings must withstand normal handling without degradation. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for Troop Support are eligible to respond, and any deviation from this requirement must be explicitly declared; non-compliant bids are subject to rejection and may incur criminal penalties. The product qualifies as a critical application item, and metal certification documentation, including CDRL-METALSCERT, must be furnished. Mercury and mercury-containing compounds are prohibited unless part of functional components like batteries, instruments, or weapon systems, with additional containment requirements per NAVSEA 5100-003D. Delivery is FOB origin with a 164-day lead time, final acceptance at destination, and no quantity variance permitted. Shipments must be addressed to the designated DLA distribution center in Tracy, California, with transportation governed by DLA procedural notes. The NSN is 9515-01-051-9709, and all data must align with the Technical Data Package and procurement note M03.
Rolled Steel Shape Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION BLOC
Solicitation # SPE7M2-26-T-6195
The contract pertains to the procurement of Terminal Junction Blocks, Sectional, identified by NSN 5940-01-185-7564 and part number M81714/61-0Z, with a quantity of 142 units. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timing. Compliance with SAE AS81714D Revision D dated 11/01/2021 and related specifications is mandatory, and the product must adhere to TDP Rev B Gen 3 standards. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or specific chemical reagents, with portable fluorescent lamps and instruments requiring shock-proof construction and secondary containment as per NAVSEA 5100-003D. The item is subject to the Qualified Products List or Qualified Manufacturers List, and all supplies must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must follow DLA’s procurement requirements and palletization standards. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and a strict quantity tolerance of plus or minus 0 percent applies. The required delivery date is July 1, 2027, with a scheduled ship date of March 22, 2027, and delivery must occur within 212 days of award. The consignee is DLA Distribution at the New Cumberland, PA facility, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE7M2-26-T-6195 with a response deadline of August 21, 2026, and was posted on August 10, 2026, managed by the Department of Defense under NAICS code 335999.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7M2-26-T-6194
The contract is for the procurement of 1,225 units of screw, cap, hexagon head with NSN 5305-00-050-4212, issued under solicitation number SPE7M2-26-T-6194 by the Department of Defense’s Nuclear Reactor Program. The requirement is fully competitive and governed by applicable military and federal specifications, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which must be adhered to based on the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. Each screw must be marked with the manufacturer’s symbol directly on its surface, as defined in MIL-HDBK-57, unless the thread diameter is 0.190 inches or smaller, in which case marking is exempt; no markings are permitted on bearing surfaces. The delivery timeline requires fulfillment within 158 days after delivery order, with the place of performance specified as New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026, with Lance Son listed as the primary point of contact for inquiries regarding the procurement.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M2-26-T-6199
The contract pertains to the procurement of 37 helical compression springs identified by NSN 5360-01-301-1176 under solicitation SPE7M2-26-T-6199, with a response deadline of August 21, 2026, and a delivery requirement within 105 days after award. The acquisition is a total small business set-aside under NAICS code 332613, administered by the Department of Defense’s Nuclear Reactor Program, with performance located in Greensboro, NC. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. Strict prohibitions exist against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary as specified in NAVSEA 5100-003D. The Government’s identification must be removed from any non-accepted supplies prior to return. Primary point of contact is David Larsen, reachable via email and phone provided.
Spring Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7M2-26-T-6193
The contract is for the procurement of two units of preformed packing with part number 695-00014, sourced from HAGGLUNDS DENISON CORP in MARYSVILLE OH, under NSN 5330-01-274-3262 and purchase request 7017702770, with a delivery requirement of 20 days after award. The solicitation number is SPE7M2-26-T-6193, issued on August 10, 2026, with responses due by August 21, 2026, and is classified under NAICS code 339991 for other miscellaneous manufacturing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and compliance is mandatory for all provisions referenced by R or I numbers. The item must adhere to NAVAIR aircraft launch and recovery equipment traceability standards, and bare parts must be marked with the contract number, NAWC CAGE, and part number unless a conflicting drawing specification applies, in which case the drawing takes precedence. The packing must be free of intentional mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or Navsea-specified reagents; portable devices containing mercury must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all materials must meet DLA packaging requirements for procurement. The point of contact is Alisha Blanton, reachable via email and phone, with the place of performance listed as Washington DC.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Shipment Labeling ServicesThe contract requires the provision of military-compliant packaging and preservation services for lock washers in accordance with MIL-STD-129 and ASTM D3951 standards, ensuring all items are properly protected, labeled, and prepared for shipment. This includes the accurate application of labeling requirements mandated by military specifications and the generation of receiving reports to document delivery and compliance. Work must be performed to meet stringent defense logistics protocols, with the place of performance designated at Hill AFB, Utah, 84056-5734. The contract is structured as a subcontract under NAICS code 493190 and is administered by the Department of Defense through the Nuclear Reactor Program. Responses are due by August 20, 2026, with the solicitation posted on August 9, 2026, and all activities must align with federal defense procurement timelines and quality benchmarks.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 10 days
View Details