Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ROD ASSEMBLY, PISTON

Active
SPE4A5-26-T-318JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 22 units of a ROD ASSEMBLY, PISTON with NSN 2995-00-371-5925 and part number 2649533, manufactured by HONEYWELL INTERNATIONAL INC under solicitation SPE4A5-26-T-318J. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revision control dependent on solicitation or award dates. The item is classified as a critical application component requiring compliance with tailored higher-level quality provisions, DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 marking, and CMMC Level 2 Cybersecurity Self-Assessment. Unit identification is not required per customer request, and zero non-conformances are mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Inspection and acceptance occur at destination, with delivery due in 507 days FOB origin and no variance permitted in quantity. The deliverables must be palletized according to DLA packaging guidelines, with packaging codes and methods strictly adhering to specified procedures including preservative methods, container types, and material usage. The shipment is addressed to DLA Distribution Depot Oklahoma at Tinker AFB, Oklahoma, with no special marking required. The contract enforces full compliance with measuring and test equipment standards and mandates physical identification of bare items. The original required delivery date is December 31, 2027, with the solicitation issued on August 2, 2026, and responses due by August 10, 2026. The North American Industry Classification System code is 336412, and the contracting office falls under the Department of Defense’s ASC Supplier Oper OEM Division, with Evgeny Korovin listed as the primary point of contact.

General Info

22 ROD ASSEMBLY, PISTON units due in 507 days, FOB origin, CMMC Level 2, DLA packaging, zero non-conformances.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-318J Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
EVGENY KOROVIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ROD ASSEMBLY,PISTON
ROD ASSEMBLY, PISTON
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
--
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC 06848 P/N 2649533
SPE4A5-26-T-318J
SECTION B
PR: 7017695765 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017695765 0001 EA 22.000
NSN/MATERIAL:2995003715925
DELIVERY (IN DAYS):0507
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:12/31/2027 Original Required Delivery Date:12/31/2027
SPE4A5-26-T-318J
SECTION B
PR: 7017695765 PRLI: 0001 CONT’D

SPE4A5-26-T-318J NSN/Part Number: 2995-00-371-5925 Quantity: 22 EA Purchase Request: 7017695765QTY: 22 Delivery: 507 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
DEFLECTOR, AIRFLOW
Solicitation # SPE4A5-26-T-318S
The contract calls for the supply of 72 units of a DEFLECTOR, AIRFLOW with NSN 2840-01-478-5931 under solicitation SPE4A5-26-T-318S, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 241 days of award, with performance located at TINKER AFB, OK 73145-8000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date depending on acquisition size. Quality assurance mandates adherence to MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan; attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Acceptance requires zero non-conformances unless otherwise stated. Configuration changes require formal engineering change proposals or variance requests, and all items must be physically marked per RQ017. Government identification must be removed from non-accepted supplies. The contractor must comply with CMMC Level 2 self-assessment requirements and adhere to DLA packaging standards as outlined in RP001. The primary point of contact is EVGENY KOROVIN, reachable via email and phone for procurement inquiries.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
Aircraft Pneumatic Tire SupplyThe contract entails the supply of two units of aircraft pneumatic tires with NSN 2620011297607 for delivery to Muwaffaq Salti Air Base in Jordan, under a subcontract arrangement issued by the Defense Logistics Agency under the Department of Defense. The North American Industry Classification System code 336412 identifies the industry as aircraft tire manufacturing, indicating the specialized nature of the product being procured. The contract was posted on August 1, 2026, and the place of performance is specifically designated to support military operations at the Jordanian air base, though no detailed delivery timeline, pricing, or point of contact information is provided. The procurement is part of ongoing logistical support efforts managed by the Defense Logistics Agency to ensure operational readiness of aircraft at overseas installations.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336412
New
DIBBS
Aircraft Pneumatic Tire SupplyThe contract obligates the supplier to provide one specific pneumatic aircraft tire identified by its National Stock Number, ensuring full compliance with rigorous military standards for packaging, labeling, and Defense Priorities and Allocations System requirements. The tire must meet exacting performance and durability specifications mandated for U.S. military aviation operations, and delivery must adhere to all applicable federal procurement regulations governing defense logistics. Awarded under the Department of Defense through the Defense Logistics Agency, this subcontract is classified under NAICS code 336412 for aircraft tire manufacturing and is part of sustained efforts to maintain airborne readiness. The solicitation was posted in August 2026, and performance will occur under the broader scope of DLA supply chain obligations, with no specific place of performance identified beyond the general requirement to fulfill DoD logistical directives.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336412
New
DIBBS
Aircraft Tire Supply (NSN 2620001370262)The contract entails the supply and delivery of two units of pneumatic aircraft tires designated by NSN 2620001370262, meeting rigorous military specifications for performance and durability. These tires must be packaged in accordance with ASTM D3951 standards to ensure protection during transit and storage, and labeled as per MIL-STD-129 requirements to enable accurate identification, tracking, and inventory management within military logistics systems. The procurement is structured as a subcontract under the broader auspices of the Defense Logistics Agency, operating within the Department of Defense, and falls under the NAICS code 336412, indicating the manufacturing of aircraft parts and equipment. The contract was posted on August 1, 2026, with no specific solicitation number or set-aside classification provided, and the place of performance and point of contact details remain unspecified, though the award reference links to the DIBBS system for further administrative details.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336412
New
DIBBS
Aircraft Pneumatic Tire SupplyThe contract entails the procurement and delivery of a single military-specification aircraft pneumatic tire identified by NSN 2620011373398, designed to meet rigorous defense standards for performance, durability, and safety in operational environments. The tire must be furnished with commercial-grade packaging and labeling conforming to industry norms while ensuring full traceability throughout the shipping process to maintain accountability and quality assurance from manufacturer to end user. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the North American Industry Classification System code 336412 indicating the supplier operates in the aerospace product and parts manufacturing sector. The requirement was posted on August 1, 2026, and the contract is associated with the award identifier SPE7LX26F86C1 under the master contract SPE7LX19D0029, indicating it is part of a larger logistics and supply chain framework aimed at sustaining military aviation readiness.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336412
New
DIBBS
Aircraft Pneumatic Tire SupplyThe contract entails the supply of two pneumatic aircraft tires with the National Stock Number 2620011373398, manufactured to meet exacting military specifications and packaged in accordance with required defense standards. These tires are intended for use in military aviation applications and must adhere to all relevant performance, durability, and safety criteria established by defense protocols. Delivery is configured under FOB destination terms, meaning the supplier bears all risks and costs associated with transport until the tires are physically received at the designated location in Germany. The contract is classified as a subcontract under the NAICS code 336412, which corresponds to aircraft parts and accessories manufacturing, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. While the solicitation number and point of contact details are not provided, the transaction is formally recorded under contract identification SPE7LX26F86B2, with the performance and delivery obligation tied to a location in Germany. The posting date indicates this is a future-dated agreement, set for August 1, 2026, suggesting it has been pre-planned as part of long-term logistics readiness efforts.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336412
New
Federal
High-Precision UAS Platform SupplyThe contract seeks the supply of two high-precision unmanned aerial systems, specifically Max Astro Max drone platforms equipped with vibration-isolated mounts to ensure stable sensor operation. Each platform must be capable of carrying dual sensors simultaneously while maintaining a minimum flight time of 15 minutes under full payload conditions, ensuring operational effectiveness for critical data collection missions. The systems are intended for use in precision environmental monitoring and reconnaissance tasks aligned with NOAA’s scientific and observational objectives. This subcontract, posted on August 1 2026, with a response deadline of August 17 2026, falls under NAICS code 336412 which pertains to the manufacturing of other aerospace product and parts. The awarding organization is the Department of Commerce, NOAA, and performance is expected to meet stringent technical requirements for durability, sensor integration, and flight stability under real-world conditions. Although specific delivery locations and point of contact details are not provided, the contract is open for submissions via the SAM.gov portal, with all bidders expected to comply with the technical specifications outlined for the drone platforms and their associated mounting systems.
Department Of Commerce Noaa

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 336412
New
DIBBS
Precision Aerospace Machining of Landing Gear ComponentsThe contract entails the precision manufacture and CNC machining of disc brake and lining assemblies specifically for the C-5A aircraft landing gear, adhering strictly to established military specifications and detailed engineering drawings. The work must meet rigorous aerospace standards to ensure mission-critical performance and safety, with all components produced to exact tolerances and subjected to required quality controls inherent in defense-grade manufacturing. This is a subcontract opportunity under the NAICS code 336412, which classifies it within the Aircraft Parts and Auxiliary Equipment Manufacturing sector. Performance of the contracted work is designated for Hill Air Force Base, Utah, with a response deadline of August 5, 2026, and the solicitation was posted on July 31, 2026. The contracting entity operates under the Department of Defense through the Maritime Supply Chain organization, indicating alignment with broader defense logistics and procurement goals. All materials, processes, and deliverables must comply with federal defense requirements, and suppliers are expected to demonstrate proven capability in high-stakes aerospace machining, with an emphasis on traceability, documentation, and adherence to technical directives without deviation.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336412
New
DIBBS
LOCK, COMPRESSOR BLADE, AIRCRAFT GAS TURBI
Solicitation # SPE4A7-26-R-0694
This contract pertains to the procurement of a Critical Safety Item (CSI) designated as a LOCK, COMPRESSOR BLADE for aircraft gas turbine applications, identified by NSN 2840-01-723-4515 and part number 2949M03P01, with a firm fixed price of $0 for 640 units. The item is classified as a Commercial Off-The-Shelf (COTS) product and is subject to stringent quality and packaging standards, including compliance with MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and DLA’s packaging requirements. Each unit must be marked with the contractor’s and actual manufacturer’s Cage codes, part number, lot number, and serial number where applicable, with no deviation permitted without explicit approval from the DSC Contracting Officer. Inspection and acceptance occur at origin, and nonconforming items must have government identification removed prior to return. The contractor is required to adhere to SAE AS9100 quality management standards, cybersecurity maturity model certification (CMMC) Level 2 self-assessment, and documentation requirements outlined in the DLA Master List of Technical and Quality Requirements. Delivery is scheduled 274 days after award, with FOB origin, and no variance in quantity is permitted. The contract incorporates standard FAR Part 12 commercial item clauses with specific deviations, including termination for convenience or cause, payment terms, and compliance with the Prompt Payment Act. Additional clauses mandate reporting obligations, subcontractor restrictions, anti-kickback protections, and adherence to trade agreements, while prohibiting procurement from entities tied to state sponsors of terrorism or the Xinjiang Uyghur Autonomous Region. The contractor must retain supply chain traceability data and comply with electronic submission protocols through DIBBS or ANSI X12 EDI systems, and all correspondence, documentation, and packaging must be in English and conform to strict DoD standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336412
New
Federal
Full-Range Aerospace Component ManufacturingThe contract requires the complete manufacturing of an engine computer unit for aerospace applications, encompassing all stages from design validation through final delivery. This includes sourcing qualified components, precise assembly, rigorous inspection, comprehensive testing, proper preservation techniques, secure packaging, and timely shipment, all adhering strictly to aerospace quality standards and the specified MQR-PSD-1 requirements. The work must be executed to ensure full compliance with defense-grade performance and reliability criteria, leaving no phase of production outside the defined technical and quality framework. The solicitation is structured as a subcontract under the NAICS code 336412, indicating classification within aerospace manufacturing, and is administered by the Department of Defense through Ok DLA Aviation at Oklahoma City. The response deadline is set for August 8, 2026, with the posting date occurring on July 31, 2026, indicating a narrow window for interested parties to prepare and submit proposals. The place of performance and point of contact details are not specified, suggesting flexibility in execution location, but all deliverables must meet the high-integrity standards expected in defense aerospace systems.
Ok DLA Aviation At Oklahoma City

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
Precision Aerospace Manufacturing of Turbine Nozzle AssemblyThe contract entails the end-to-end manufacturing of the F110 engine turbine nozzle assembly, covering all stages from material procurement through machining, heat treatment, final assembly, rigorous inspection, and secure delivery, all in strict adherence to military specifications. Each phase must meet exacting quality and performance standards to ensure operational reliability in defense aerospace applications. The work is classified as a subcontract under NAICS code 336412, indicating specialized aerospace component manufacturing, and is being managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on July 31, 2026, with a firm response deadline of August 8, 2026, at 4:59 AM. Although no specific set-aside designation is provided, the nature of the work and the agency involvement suggest it is targeted toward experienced defense contractors capable of handling classified or sensitive military hardware. The place of performance is not explicitly defined, implying flexibility in location as long as deliverables comply with all technical and regulatory requirements. Successful bidders will be expected to demonstrate proven capability in high-precision turbine component production and full compliance with defense manufacturing protocols.
Ok DLA Aviation At Oklahoma City

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
Turbine Rotor Manufacturing and AssemblyThe contract entails the full manufacturing and assembly of turbine rotor assemblies for F110 aircraft engines, encompassing every stage from material procurement through final delivery. This includes precision machining, heat treatment, dynamic balancing, comprehensive inspection, functional testing, preservation against corrosion, secure packaging, and transportation to Tinker AFB. All work must meet stringent defense-grade quality and reliability standards to ensure operational readiness and performance under extreme conditions. The solicitation is designated as a subcontract under NAICS code 336412, with a response deadline of August 8, 2026, and was posted on July 31, 2026. The contracting activity is managed by the Defense Logistics Agency Aviation at Oklahoma City under the Department of Defense, with performance required at Tinker AFB. Although specific set-aside details are not provided, the scope demands specialized aerospace manufacturing capabilities and strict compliance with military logistics and quality control protocols.
Ok DLA Aviation At Oklahoma City

POSTED

2 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 333414
New
DIBBS
GRILLE, METAL
Solicitation # SPE4A5-26-T-319C
The contract pertains to the procurement of a metal grille identified by part number 439W3234-11D and NSN 1660017143102, with a quantity of two units to be delivered within 347 days. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item is classified as a critical application item for The Boeing Company. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating referenced standards such as MIL-STD-1916 and ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. Configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific marking and airworthiness requirements are mandatory, and the item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking. The contractor is required to retain supply chain documentation and adhere to FAA bare item marking rules, though unit identification is not required. Packaging must meet RP001 and RP003 standards, and palletization must follow DLA guidelines. The item is non-unique and not subject to DoD unique item identification. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and the original required delivery date is July 24, 2027. Price per unit is set at $2.00, totaling $4.00 with no variance allowed in quantity.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BOOT, DUST AND MOIST
Solicitation # SPE4A5-26-T-319A
The contract pertains to the procurement of three units of BOOT, DUST AND MOIST with NSN 5340016807502 and part number 209-001-146-101, under solicitation SPE4A5-26-T-319A, with delivery required within 657 days from the contract date and a firm delivery deadline of May 29, 2028. Items must be delivered FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must comply with DLA’s standardized requirements, including MIL-STD-129 for marking and labeling, and adherence to RP001 for palletization, overriding any commercial standards like ASTM D3951. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging is acceptable only if it meets DLA’s superior technical and quality requirements referenced from the DLA Master List. Unit of issue is each (EA), and no Item Unique Identification is required as per customer request. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, with attribute classifications mandating strict verification levels. Configuration changes require formal engineering change proposals or variance requests, and all government identification must be removed from non-accepted supplies. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, with transportation governed by DLAD proc notes C19 and C20.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, ENGINE, LH, A
Solicitation # SPE4A5-26-T-318P
The contract pertains to the procurement of three engine left-hand harnesses, part number 209-375-105-101, under solicitation SPE4A5-26-T-318P, with a delivery requirement of 398 days and an original ship date of September 13, 2027. The item is source-controlled, meaning it must be manufactured and tested strictly in accordance with limited rights data held by approved sources, primarily First Electronics Corp. with CAGE code 14532, and no other vendor may quote without prior source approval and submission of a Source Approval Request package. Inspection and acceptance occur at origin, following MIL-STD-1916 or equivalent zero-based sampling plans with stringent acceptance criteria: critical attributes require a zero-defect standard, major attributes are sampled at AQL 1.0, and unspecified attributes are treated as major. The item is classified as a critical application and is subject to DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA packaging guidelines, with no variation permitted in quantity. The contract includes cybersecurity compliance requirements under CMMC Level 2 self-assessment and mandates physical identification marking per RQ017. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, PA, with all documentation, traceability, and testing records retained by the supplier. The unit of issue is each (EA), priced at $3.00 per unit for a total value of $9.00.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE4A5-26-T-318B
The contract is for a single electrical plug connector, identified by part number BACC63BP12H3SN and NSN 5935-01-607-4886, with a unit of issue of Each (EA), effective February 1, 2026. The requirement stems from a solicitation issued by the Department of Defense under reference SPE4A5-26-T-318B and is managed by the ASC Supplier Operations OEM Division. Delivery is due within 20 days of contract award, with FOB Origin terms and inspection and acceptance occurring at the destination. The item must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking applied. Unit packaging is configured for bulk shipping in a single container with no cushioning or dunnage, and palletization must adhere to DLA-specific packaging guidelines. The item is to be shipped via traceable freight, explicitly excluding parcel post, to the naval air station in Oak Harbor, Washington. Quality assurance requires strict adherence to MIL-STD-1916 or equivalent zero-defect sampling plans, with specified verification levels for critical, major, and minor attributes. Manufacturers must be certified under ISO 9001:2015 and comply with DLA’s technical and quality requirements referenced via R-numbers in the DLA Master List. Government identification must be removed from non-accepted supplies, and measuring and test equipment used in production must be calibrated per RT001. Item Unique Identification is not required per the Service customer’s request. The purchase request number is 7017607376, with a total price of $1.00 for one unit and an original required delivery date of July 22, 2026.
Electronic Connector Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEY
Solicitation # SPE4A5-26-T-318F
The contract pertains to the procurement of 166 units of a washer, key, identified by NSN 5310013632832 and part number 4903T22P01, sourced under Solicitation SPE4A5-26-T-318F. Delivery is required within 20 days from contract award, with FOB origin terms and no tolerance for quantity variance — exactly 166 units must be delivered. Inspection and acceptance are both to occur at the origin, with packaging required to comply with MIL-STD-2073-1E and marking aligned with MIL-STD-129, including no special marking code. The product is classified as a critical application item, subject to stringent quality controls outlined in DLA’s master technical and quality requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance unless otherwise specified. Configuration changes must follow formal engineering change procedures, and non-accepted supplies must have government identification removed per contract stipulations. The item is to be delivered to the Turkish military facility in Eskisehir, with freight handled by A.J. Worldwide Services, and the consignee is the 1st Air Maintenance Factory Directorate. Packaging must meet DLA’s packaging requirements, including unit containment as BD, intermediate container E5, and packing level B. The contract is under the Department of Defense, managed by the ASC Supplier Oper OEM Division, with Steven Lewis listed as the primary point of contact. The solicitation was posted in August 2026 with a response deadline the same month, and the original required delivery date is January 22, 2026. All materials must adhere to the DoD’s authorized unit of issue and relevant ANSI X12 standards, with full technical and quality provisions referenced through DLA’s official master list of technical and quality requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
HUB, WHEEL, VEHICULAR
Solicitation # SPE4A5-26-T-318Y
The contract pertains to the procurement of three vehicular hub and wheel units with NSN 2530-01-686-5163 and part number 70250-12701-102 under solicitation SPE4A5-26-T-318Y. The delivery is required within 588 days from the contract date with a firm delivery deadline of March 21, 2028, and the items must be shipped FOB origin. The quantity is strictly fixed at three units with zero variance allowed. Inspection and acceptance occur at the destination warehouse located at Tracy, California. All packaging must adhere to DLA’s Master List of Technical and Quality Requirements, with specific directives for hazardous and nonhazardous materials: hazardous items must conform to FED-STD-313 and TQ requirement IP025, while nonhazardous items must follow ASTM D3951 unless superseded by higher-priority DLA standards. Packaging and labeling must comply with MIL-STD-129 and palletization must meet RP001 DLA packaging requirements. The Unit of Issue is each unit, with a contract price of $3.00 per unit, totaling $9.00. The shipping address and parcel post address are identical, directing delivery to DLA District San Joaquin, Rec Whse 57, Tracy, CA. Transportation procedures are governed by DLAD Proc Notes C19 and C20. The contract was issued under a federal acquisition framework, categorized under NAICS code 336330, with primary point of contact Stephanie Hewlett from the Department of Defense’s ASC Supplier Oper OEM Division.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VALVE INLET SEAT
Solicitation # SPE4A5-26-T-318V
The contract pertains to the procurement of 13 valve inlet seats with NSN 1650-00-471-7681 and part number AC08822 supplied by Meggitt Aerospace Limited, under solicitation SPE4A5-26-T-318V. Delivery is required within 347 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting specifications such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with configuration control enforced through engineering change proposal and variance procedures. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and physical marking of the item is mandatory. The unit of issue is each (EA), with no variance permitted in quantity, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania by July 24, 2027. All documentation and compliance obligations referenced in the DLA master list are binding and take precedence.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325110
New
DIBBS
CLEANING COMPOUND, SOLV
Solicitation # SPE4A5-26-T-318G
The contract is for the procurement of a commercial off-the-shelf cleaning compound, solvent, identified by NSN 6850-01-682-3375 and part number 801-1500-157, supplied by Highland Engineering, Inc., with a CAGE code of 0AK83. The unit of issue is a container (CO), with each container holding 2.0 gallons, and the total quantity ordered is three containers. Delivery is required FOB destination within 202 days, with a required ship date of March 1, 2027, and no variance in quantity is permitted. Inspection and acceptance occur at the destination, with packaging strictly governed by MIL-STD-2073-1E and marking required in accordance with MIL-STD-129, including the special marking code ZZ for additional requirements. Palletization must comply with DLA packaging standards, and the material has no shelf life restriction. The product is classified as a hazardous material, mandating full compliance with OSHA's revised Hazard Communication Standard and the Globally Harmonized System of Classification and Labeling of Chemicals. Suppliers must submit GHS-compliant Safety Data Sheets (SDS) and approved product labels for review and approval by technical personnel prior to contract award, and copies must be filed with DLA Aviation HMIRS. Employee training on SDS, labeling, and 29 CFR 1910.1200 requirements is mandatory. Sampling is governed by MIL-STD-1916 or ASQ H1331, with zero tolerance for non-conformances unless otherwise specified. The delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California, and all transportation must adhere to DLAD Proc Note C19 for general shipping and C20 for first destination routing.
Petrochemical Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
CHAIN ASSEMBLY, SING
Solicitation # SPE4A5-26-T-318U
The contract is for the procurement of two units of a chain assembly, singular, identified by NSN 4010-01-630-3113 and part number 00933-1, manufactured by Tru-Hitch, Inc. The total quantity is two units, priced at $2.00 per unit, with delivery required within 121 days from the contract date, FOB origin. All items must be configured to a precise dimension of 7 x 7 x 7 inches and packaged in accordance with MIL-STD-2073-1E, including specific preservation methods, wrapping, and packaging codes. Marking must strictly follow MIL-STD-129 with no special marking required. Palletization and packaging must comply with DLA’s official packaging requirements. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with both inspection and acceptance occurring at the destination. Sampling and quality verification are governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample unless otherwise stated, and attribute classifications must align with predefined verification levels or AQLs. Technical and quality requirements referenced through R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, and compliance is mandatory. The solicitation number is SPE4A5-26-T-318U, issued August 2, 2026, with a response deadline of August 10, 2026, under a federal acquisition framework with NAICS code 332618. The primary point of contact is Hien-Van Trinh of the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-T-318Z
This contract, issued under solicitation SPE4A5-26-T-318Z, procures 15 units of a motional transducer pickup with NSN 6695-00-972-3242 from CEC VIBRATION PRODUCTS, LLC, part number 4-103-0001. All requirements are governed by the DLA Master List of Technical and Quality Requirements, with adherence to MIL-STD-1916 or ASQ H1331 for sampling unless otherwise stated, and zero non-conformances are required in sampled lots unless specified otherwise. Configuration changes require formal engineering change proposals, and deviations or waivers must be formally requested. The item is classified as a critical application product and must be physically identified per RQ017 standards. The product must comply with MIL-STD-2073-1E packaging specifications, including packing code Q, packaging level B, and marking per MIL-STD-129 with no special marking code. Palletization follows DLA packaging requirements, and delivery is FOB origin within 20 days of contract award, with no tolerance for quantity variance. The delivery destination is the Parts-Attach General Depot in Tainan City, Taiwan, with the required delivery date set for August 4, 2026. The contract is a total small business set-aside under NAICS code 334513, and all performance and compliance obligations are subject to verification at origin. Government use codes and administrative data are appended for internal tracking and logistics coordination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 314994
New
DIBBS
LINK, CHAIN, CONNECTING
Solicitation # SPE4A5-26-T-319H
This contract pertains to the procurement of one unit of a connecting chain, identified by NSN 4010-01-590-4131 and purchase request 7017659279, under solicitation SPE4A5-26-T-319H. Delivery is required within 20 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization follows DLA standards, and the item must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The delivery address is COMNAVAIRLANT SWWP EQOL HAB in Norfolk, Virginia, with specific container and handling instructions including E5 unit containers and dry preservative methods. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, with attribute classifications assigned specific verification levels and AQLs. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The item is to be delivered to the government with no variance permitted in quantity, and the original required delivery date is July 27, 2026.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTROL STICK, AIRCR
Solicitation # SPE4A5-26-T-317Z
The contract is for a single Control Stick, Aircraft, identified by NSN 1680-00-054-3600 and part number 209-001-334-007, supplied by Bell Textron Inc. The item is classified as a critical application item and must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Packaging must be palletized according to DLA directives and use E5 unit containers with preservative method 10 and non-corrosive dry packaging. Delivery is due within 20 days FOB origin to a military recipient in Kaohsiung, Taiwan, with zero variance allowed in quantity. Inspection and acceptance occur at origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The supplier must comply with DLA’s Master List of Technical and Quality Requirements, and configuration changes require an Engineering Change Proposal or variance request. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. Documentation for source approval is mandatory, and the contract is subject to Covered Defense Information provisions. The solicitation number is SPE4A5-26-T-317Z with a response deadline of August 10, 2026, and the required delivery date is August 4, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details