Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on October 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

ROLLER, LINEAR-ROTARY M

Closed
SPE4A6-27-T-0001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-27-T-096F
This solicitation, issued by the DLA Weapons Support ASC Commodities Division under number SPE4A6-27-T-096F, is for the procurement of two annular ball bearings (NSN 3110-00-540-9890). This is a source-controlled, critical application item that must be manufactured and tested according to cited limited rights data. Approved sources include New Hampshire Ball Bearings Inc and MRC Bearings. Due to strict domestic sourcing restrictions under DFARS 252.225-7016, the bearings must be manufactured in the United States, its outlying areas, or Canada, with the cost of components from these regions exceeding 50% of the total component cost. A contractor's declaration regarding the domestic or foreign nature of the material is required for award consideration. The contract specifies FOB Origin delivery to DLA Dist San Joaquin in Tracy, California, with a required delivery date of October 31, 2027. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. Packaging and preservation must adhere to MIL-DTL-197M and MIL-STD-129, with specific prohibitions against the intentional addition of mercury. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with various DFARS cybersecurity and safeguarding regulations, including DFARS 252.204-7012.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-27-T-095A
This solicitation, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 88 annular ball bearings (NSN 3110005809301), identified as Commercial Off the Shelf items for a critical application. The requirements specify GE Aviation Systems LLC part number CYRB252 and mandate adherence to TDP Rev A Gen 1 and QAP 13873. Delivery is required at the DLA Distribution Depot Hill by September 1, 2027, with a need ship date of May 4, 2027. The contract is a fixed-price agreement with destination inspection and acceptance, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. A strict domestic sourcing restriction applies per DFARS 252.225-7016, requiring that the bearings be manufactured in the United States, its outlying areas, or Canada, with domestic component costs exceeding 50% of the total. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Packaging and preservation must strictly follow MIL-DTL-197M and MIL-STD-2073-1E, with marking compliant with MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, hazardous materials, and the prohibition of covered defense telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-27-T-095D
Solicitation SPE4A6-27-T-095D, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of eight sleeve bearings under NSN 3120-01-286-8031. The contract requires delivery within 103 days, with a need ship date of March 8, 2027, and a final delivery date of April 25, 2027, to DLA Dist San Joaquin in Tracy, California. The procurement is managed under the First Destination Transportation program with FOB Origin terms. Due to the nature of the item, casting or forging may be required, and the contractor may need to request assistance for special tooling. The contract mandates strict adherence to technical and quality standards, including SAE AS9003 or ISO 9001, and incorporates DLA Master List requirements. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with specific preservation methods and hazardous material labeling requirements. This procurement is subject to significant regulatory constraints, including ITAR and EAR export controls, the Buy American and Balance of Payments Program, and CMMC Level 2 certification. Additionally, the contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.204-7018 regarding prohibited telecommunications equipment. All invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days

AI Contract Overview

Show more

Solicitation SPE4A6-27-T-0001, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for four linear-rotary motion rollers, identified by NSN 3120-00-133-1352 and part number G312. The procurement is categorized under NAICS 332991 and requires delivery to the USARC at Holderman Hall in West Los Angeles, California. The original required delivery date is September 14, 2026, with a delivery timeframe of 20 days after order. Shipping must be handled via traceable means with FOB Origin terms, and inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance will be managed through a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331. Technical and quality requirements are further governed by the DLA Master List, specifically referencing RA001, RQ011, and RQ017. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors must submit quotes via the DLA Internet Bid Board System and comply with various federal regulations, including the Buy American Act and DFARS cybersecurity standards.

General Info

DLA seeks quotes for four linear-rotary motion rollers delivered to Los Angeles, California.

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

1250 FEDERAL AVENUE, WEST LOS ANGELES, CA, 90025-3903, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first18 pages · rfq
High

Read the document

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Sleeve Bearing Manufacturing and SupplyOpen now, due in 8 days
  • Sleeve Bearing Supply (NSN 3120012875830)Open now, due in 8 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA

Full Description

Show more
ROLLER,LINEAR-ROTARY MOTION
ROLLER LINEAR ROTARY MOTION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ANDERSON CLAYTON AND CO 36916
HOUSTON TX
P/N G312
ANDERSON CLAYTON AND CO INC LONG 36916 P/N G312
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-27-T-0001
SECTION B
PR: 7018346109 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018346109 0001 EA 4.000
NSN/MATERIAL:3120001331352
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W62N83
W6KE HOLDERMAN HALL USAR CTR
1250 FEDERAL AVENUE
LOS ANGELES CA 90025-3903
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9037C
0311 CS HHC HHC AA REAR DET
HOLDERMAN HALL USARC
1250 FEDERAL AVENUE
WEST LOS ANGELES CA 90025-3903
US
MARKFOR
W9037C
0311 CS HHC HHC AA REAR DET
HOLDERMAN HALL USARC
1250 FEDERAL AVENUE
WEST LOS ANGELES CA 90025-3903
US
M/F: (TCN) W9037C62480014
RDD:
PROJ: TP 3
SUPP ADD: W806BY SIG: A
SPE4A6-27-T-0001
SECTION B
PR: 7018346109 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: MT
Need Ship Date:00/00/0000 Original Required Delivery Date:09/14/2026
SPE4A6-27-T-0001 NSN/Part Number: 3120-00-133-1352 Quantity: 4 EA Purchase Request: 7018346109QTY: 4 Delivery: 20 days ADO

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS