This Solicitation opportunity from Government of Canada was posted on October 13, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Roof Replacement & Repair on building: BC18, BC19, BC20, BC23, BC24, BC25, and FBE

Closed

21422-24-4484526International

Submission Closed10/13/2023, 11:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238160

New

SLED

Insulation and FirestoppingThis subcontract for the California Department of State Hospitals involves the installation of plumbing piping insulation and penetration firestopping. The scope of work requires the contractor to insulate domestic hot and cold water piping utilizing polyethylene/kraft paper moisture barriers and aluminum jackets meeting ASTM B209 standards, while also ensuring all penetrations in fire-resistance-rated walls are properly sealed. The project falls under NAICS code 238160 and is managed through the state of California. Interested parties must adhere to the response deadline of December 9, 2026, to provide the necessary insulated piping and fire-rated penetration seals for these facility projects.

California Department of State Hospitals

POSTED

DEADLINE

Inland Empire Job Corps-Request for Quote Roof Design & Build

Solicitation # inland-empire-job-corps-request-quote-roof-design-build

Management & Training Corporation is seeking quotes for a fixed-price design-build subcontract to construct an over-build enclosure for the lower roof of Building G at the Inland Empire Job Corps Center in San Bernardino, California. The project involves designing and installing a roof covering approximately 800 gross square feet, featuring a 3% sloped roof with a single ply, EPDM 60 mil roofing system over wood or metal decking. The scope includes structural framing that extends existing bearing walls or utilizes a new post-beam system, the installation of three LED strip light fixtures with one emergency backup, and strict adherence to OSHA safety standards and the Architectural Barriers Act Accessibility Standard of 2007. The total period of performance is 240 days, with a requirement to complete the work within 100 consecutive business days following the Notice to Proceed. Bids are due by November 2, 2026, and will be evaluated based on overall best value. This is a small business set-aside opportunity open to various SBA certifications. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Bidders must conduct a physical site visit and sign an attendance roster to be eligible. The project is subject to Construction Wage Rate Requirements, necessitating compliance with California prevailing wages and the submission of weekly certified payroll reports. Additionally, all inspections and testing must be conducted by an independent, third-party agency registered in California. Required insurance minimums include 1 million dollars per occurrence for general liability, 1 million dollars for auto, and 500,000 dollars for workers compensation.

Inland Empire Job Corps

POSTED

DEADLINE

Sheet Metal & Flashing

Jones County Board of Commissioners

POSTED

DEADLINE

TPO Roofing Installation

Jones County Board of Commissioners

POSTED

DEADLINE

Flat Roof Replacement ServicesThis subcontract for Flat Roof Replacement Services involves the removal and replacement of existing flat roofing membranes across seven building structures for the Cobb County Board of Education. The selected contractor will be responsible for tearing off old materials and installing new TPO, EPDM, or Modified Bitumen systems to deliver fully installed and watertight results. Qualified candidates must possess a commercial roofing license and maintain strict safety compliance for working at heights. The solicitation was posted on October 29, 2026, with a response deadline of December 2, 2026. This project falls under NAICS code 238160 and is managed through the state of Georgia.

Cobb County Board of Education

POSTED

DEADLINE

Roofing and Flashing ContractorThis subcontract agreement is for a Roofing and Flashing Contractor to provide installation and repair services for City of Cambridge facility projects, specifically located at 158 Spring St in Cambridge, Massachusetts. The selected contractor will work under prime contractors to remove existing roofing materials and install new membranes or shingles, along with flashing to ensure watertight seals at all joints, edges, and penetrations. The ultimate goal of the engagement is the delivery of a fully completed and watertight roofing system. To be eligible for this role, the contractor must meet the qualification standards for trade contractors as defined by the City of Cambridge. The solicitation was posted on October 29, 2026, with a response deadline of November 12, 2026. This project falls under NAICS code 238160, focusing on specialized roofing activities.

POSTED

DEADLINE

COC-RFQ-FY27-31162RF:Request for Qualifications Trade Contractors 158 Spring St -Roofing & Flashing

Solicitation # BD-27-1144-CAMBR-CAMBR-134769

The City of Cambridge is issuing a Request for Qualifications (RFQ) under solicitation number BD-27-1144-CAMBR-CAMBR-134769 and file number COC-RFQ-FY27-31162RF to identify qualified trade contractors for roofing and flashing services. The project is located at 158 Spring St in Cambridge, Massachusetts. This open market solicitation was posted on October 29, 2026, with a response deadline and bid opening scheduled for November 12, 2026, at 11:00 AM. Administrative oversight is managed by Vilsabel David as the Purchaser and Natalie Sullivan as the primary contact person. Electronic quotes are permitted and should be submitted via the City's e-Procurement Portal. As this is a request for qualifications, specific contract values and unit pricing are not provided in the solicitation documents. All billing and administrative correspondence is directed to Natalie Sullivan at 795 Massachusetts Ave, Room 303, Cambridge, MA 02139.

POSTED

DEADLINE

Roof Waterproofing InstallationThis subcontract for Leicester City Council involves the installation of waterproofing systems across four roofs to ensure complete water-tight integrity. The selected provider will apply overlays using heat-welding equipment and specialized tools in strict accordance with the technical specifications provided on the eastmidstenders.org portal. The project requires the use of certified roofing installers who maintain full compliance with working-at-heights safety standards. The final deliverable consists of four fully functional waterproofed roof systems, with a response deadline for the solicitation set for November 12, 2026.

Leicester City Council

POSTED

DEADLINE

Roofing and Flashing ContractorThis subcontract opportunity is for a Roofing and Flashing Contractor to perform work on DCAMM facility projects located at 158 Spring St, Cambridge, MA. The selected contractor will be responsible for installing roofing systems and membranes, as well as applying flashing to joints, edges, and penetrations to ensure a completely watertight building envelope. Interested parties must provide a surety commitment letter for payment and performance bonds totaling 110 percent of the contract value from a company licensed in Massachusetts. The response deadline for this solicitation is November 12, 2026, and the final deliverable is a fully completed and watertight roofing and flashing system.

Capital Buildings Projects

POSTED

DEADLINE

Request for Qualifications for Trade Contractors for 158 Spring Street - ROOFING AND FLASHING ONLY

Solicitation # COC-RFQ-FY27-31162RF

The City of Cambridge is seeking prequalified Trade Contractors for roofing and flashing services as part of a comprehensive renovation of the former Kennedy-Longfellow School, a 101,590 square foot structure located at 158 Spring Street. This procurement is conducted under M.G.L. c.149A Construction Management at Risk, with the specific roofing and flashing trade estimated at 55,571.00 dollars. The overall project duration is approximately 12 months from the notice to proceed. The selection process consists of two phases, beginning with a prequalification phase where firms must submit a Statement of Qualifications (SOQ) via the City's e-Procurement Portal by November 12, 2026. To be eligible for the subsequent bidding phase, firms must achieve a minimum total score of 70 points, with specific minimums required in references and project capacity categories. Mandatory requirements include a valid DCAMM Sub-bidder Certificate of Eligibility, a commitment letter for payment and performance bonds at 110 percent of the estimated contract value, and a 10-hour OSHA-approved safety certification. Applicants must submit a comprehensive package including Trade RFQ Form 1 prior to the SOQ application, along with various schedules detailing business ownership, management personnel, five years of similar project experience, and a three-year workers compensation modifier history. Additional compliance mandates include adherence to the Cambridge Employment Plan, the Responsible Employer Plan, the Living Wage Ordinance, and Minority Business Enterprise programs. All submissions must be electronically filed, and any packages received after the deadline will be rejected.

Capital Buildings Projects

POSTED

DEADLINE

Roofing and Flashing InstallationThis subcontract for Roofing and Flashing Installation involves the installation of roof membranes and weather-proofing for the 158 Spring St facility in Cambridge, Massachusetts. Managed by Capital Buildings Projects, the selected contractor will work under prime contractors to deliver a fully installed and flashed roofing system designed to ensure a watertight building envelope. Interested parties must submit a Statement of Qualifications along with Schedules A through M to be considered. The solicitation was posted on October 29, 2026, with a response deadline of November 12, 2026. The project falls under NAICS code 238160.

Capital Buildings Projects

POSTED

DEADLINE

Request for Qualifications for Trade Contractors for 158 Spring Street: TRADE CONTRACTOR RFQ INTEREST FORM

Solicitation # COC-RFQ-FY27-31162RF

The City of Cambridge, through Capital Buildings Projects, has issued solicitation COC-RFQ-FY27-31162RF for the prequalification of trade contractors for the 158 Spring Street project. This specific request is limited exclusively to Roofing and Flashing services. The procurement follows the DCAMM CM at Risk Standard Trade Contractor RFQ Template Rev. 1020. Interested firms must adhere to a strict submission sequence, requiring the submission of Trade RFQ Form 1 (Interest Form) to the City before submitting the Statement of Qualifications (SOQ) via Trade RFQ Form 3. To complete the prequalification process, respondents must provide Trade RFQ Form 3 along with accompanying Schedules A through M. Firms seeking prequalification for multiple trades are required to submit separate individual interest forms for each trade. The response deadline is November 12, 2026, at 3:59 PM. Primary contact for this solicitation is Vilsabel Selman, Construction and Sustainable Procurement Specialist, with the project performance located in Cambridge, Massachusetts.

Capital Buildings Projects

POSTED

about 12 hours ago

DEADLINE

in 14 days

AI Contract Overview

Correctional Service Canada is seeking a contractor to replace existing asphalt shingles with a snap-lock standing seam steel roofing system on buildings BC18, BC19, BC20, BC23, BC24, BC25, and FBE. The scope of work includes the removal and disposal of old shingles, vents, flashing, soffit, and facia, followed by a roof inspection and necessary repairs subject to written approval. The contractor is required to install a self-adhering weather stop membrane and 24-gauge steel panels between 16 and 24 inches wide, featuring a rust-inhibiting base coat and Kynar paint finish. The project requires the installation of all necessary accessories, including corrosion-resistant fasteners, snow stops, and new vents and facia in a color determined by the Site Authority. All materials must be new and installed according to manufacturer specifications, with the contractor responsible for daily site cleanup. Upon completion, the contractor must provide written warranties guaranteeing the coating and weather tightness for a minimum of 25 years.

General Info

Contractor to replace asphalt shingles with steel roofing on seven Correctional Service buildings.

Agency

Government of Canada → Correctional Services of Canada

NAICS

238160 - Roofing Contractors

Place of Performance

*Bracebridge *Collingwood *Huntsville *Gravenhurst, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 13

Solicitation

Response DeadlineOct 13

Deadline has passed

Submission Closed

10/13/2023, 11:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Correctional Services of Canada

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Correctional Services of Canada

Office AddressN/A

Contacts

Darrin MollesonPoint of Contact

contact@example.gov

+1 (555) 000-0000

Full Description

The Correctional Service Canada has a requirement to replace the asphalt shingles on buildings: BC18, BC19, BC20, BC23, BC24, BC25, and FBE with standing seam steel roofing. The Contractor must: • Remove and dispose of the existing shingles, vents, flashing, soffit, and facia. • Inspect the existing roof for damage and make the repairs as required. The Contractor must obtain the Project Authority’s written approval before proceeding with any repairs. • Seal entire roof surfaces using a self-adhering weather stop membrane material. • Supply and install a new snap-lock standing seam roof system. Provide all necessary accessories, ridges, hips, valleys, corners, flashing, closure members and fasteners to ensure weather tight installation. • Provide roof panels that are between 16” and 24” wide and have a 24-gauge thickness. The panels must be base coated to inhibit rust and top coated with Kynar paint. The seams must be between 1.5” and 2” high. • Provide roof clips and fasteners must be corrosion resistant. • Supply and install new vents, flashings, soffit, and metal facia coverings to match the new roof colour. The Site Authority will determine the colour of the roof panels, flashing, soffit, and facia before the contractor begins any work. • Supply and install the appropriate sealing materials to complete a weather tight finish to all areas of the roof. • Supply and install new snow stops to all roof edges as per manufactures recommendations. • Install all materials as per the manufactures recommendations and specifications. All materials must be new. • Clean all areas around the building removing all scrap and debris from the project site each day of work. • Provide a warranty with a minimum of 25 years on the coating and weather tightness. Supply in writing, warranties or guaranties covering materials and of the new roofs to the Site Authority.