Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ROPE, WIRE

Active
SPE7L4-26-T-5529Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicits 45 units of rope, wire under NSN 4010-01-369-6685 with a total requirement of 45 each, subject to a zero variance in quantity. Delivery is required within 167 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific packaging codes and methods for preservation and containment. Government-issued identification must be removed from non-accepted supplies, and no Class I ozone-depleting chemicals may be used in any component or process, with any substitutions requiring prior approval. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-defect sampling plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, with zero non-conformances required unless otherwise stated in the contract. The contract is a total small business set-aside under NAICS code 332618, with a response deadline of July 23, 2026, and is issued by the Department of Defense’s Combat Vehicles and Armament office. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The designated delivery point and freight shipping address is the DLA Distribution facility in New Cumberland, PA.

General Info

45 wire rope units solicited by DLA with submission deadline July 20, 2026, open to all vendors.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE7L4-26-T-5529.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ROPE,WIRE
ROPE, WIRE
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
.
CRITICAL APPLICATION ITEM
AMZ ALABAMA INC. 076M6 P/N 6-246-001508
GROVE U.S. LLC 12361 P/N 6-246-100129
BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP 0FW39 P/N 6-246-001508
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7L4-26-T-5529
SECTION B
PR: 7017439817 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017439817 0001 EA 45.000
NSN/MATERIAL:4010013696685
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:JB CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/04/2027 Original Required Delivery Date:04/02/2027
SPE7L4-26-T-5529 NSN/Part Number: 4010-01-369-6685 Quantity: 45 EA Purchase Request: 7017439817QTY: 45 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
Block and Tackle Supply and DeliveryThe contract requires the manufacture, packaging, and delivery of 15 units of Block and Tackle identified by NSN 3940-01-429-8206, to be delivered to DLA Distribution in New Cumberland, Pennsylvania, adhering strictly to military standards for packaging, marking, and inspection. All work must comply with defense specifications to ensure operational readiness and logistical compatibility within military supply chains. The item is classified under NAICS code 332618, indicating it falls within the custom die stamping and industrial machinery manufacturing sector. The contract is structured as a subcontract with a response deadline of July 31, 2026, and was posted on July 20, 2026, leaving a short window for qualified vendors to submit proposals. Delivery must be completed in full compliance with the requirements outlined for military-grade handling and documentation, and the performance location is explicitly tied to the DLA facility in New Cumberland, with no deviations permitted in location or delivery protocols.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332618
New
DIBBS
Precision Spring Manufacturing – Helical Compression SpringsThe contract requires the manufacture, testing, packaging, and delivery of helical compression springs adhering strictly to DLA technical standards, ensuring full compliance with origin inspection protocols, configuration control measures, and approved packaging requirements. All work must be executed to meet the precise engineering and quality benchmarks mandated by the Department of Defense, with emphasis on consistency, traceability, and reliability throughout the production lifecycle. Performance of the contract is designated for Greensboro, North Carolina, with a response deadline of July 31, 2026, and the solicitation falls under NAICS code 332618 for other spring manufacturing. This is classified as a subcontract, and while no set-aside type is specified, the procurement is administered by the Land Supply Chain under the Department of Defense, emphasizing its critical role in defense logistics and supply chain readiness.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332618
New
DIBBS
Supply of Straight-Headed Pins (NSN: 5315016057397)The contract calls for the manufacture, quality assurance, packaging, and delivery of 89 straight-headed pins designated by NSN 5315016057397, following strict military specifications NASM20392 Rev 01 and NASM5673 Rev 1, with full compliance to the DLA Master List, MIL-STD-129 for labeling and packaging, and ASTM D3951 for commercial packaging standards. All work must adhere to the required technical and procedural benchmarks to ensure interoperability and reliability within defense systems, and the product must be delivered to the specified performance location in New Cumberland, Pennsylvania, with zip code 17070-5002. This is a small business set-aside subcontract under the SBA program, categorized under NAICS code 332618, reserved exclusively for small businesses as defined by the FAR 19.5 regulations. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense. All submissions must be made through the designated DIBBS platform, and suppliers are expected to demonstrate not only technical capability but also full compliance with federal contracting requirements for small business participation.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract specifies the procurement of 89 straight-headed pins identified by NSN 5315-01-605-7397 under solicitation SPE4A6-26-T-07VH, with a total value based on a unit price for each item and a required delivery within 165 days from the award date. The items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, though DLA requirements take precedence. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise defined, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The product must conform to NASM20392 Rev 01 and NASM5673 Rev 1, with bare item marking and identification per RQ017, and government identification removed from non-accepted items under RQ011. Inspection and acceptance occur at origin, with no variance allowed in quantity. Packaging must adhere to RP001 DLA packaging standards and be palletized accordingly, shipped FOB origin to the delivery address in New Cumberland, Pennsylvania. The contract is a Total Small Business Set-Aside under NAICS code 332618, with a response deadline in July 2026 and delivery required no later than March 7, 2027.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
BLOCK AND TACKLEThis contract pertains to the procurement of 15 units of a Block and Tackle item identified by NSN 3940-01-429-8206 and part number 12365945, under solicitation SPE8EE-26-T-2126, with a required delivery date of July 9, 2026, and a delivery window of 163 days from award. The item must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization follows DLA’s packaging requirements, and transportation is governed by DLAD procedural notes C19 and C20. The contract enforces stringent quality and cybersecurity requirements: sampling and acceptance criteria mandate zero non-conformances under MIL-STD-1916 or a comparable zero-based plan unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively; unclassified attributes are treated as major. Technical and quality specifications referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Additionally, the contractor must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment, and the item is classified as a critical application. The purchasing request number is 7017444038, and the point of contact for inquiries is Philip Ferrara of the Department of Defense, with full solicitation details available through the DIBBS system.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract specifies the procurement of a single straight-headed pin with part number 901-236-625-275 and NSN 5315-01-649-4032, quantity of one unit, to be delivered within five days under FOB origin terms with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including specified preservation methods and marking requirements, with no special marking needed. The item is designated as a critical application item for The Boeing Company and is subject to non-tailored quality requirements under ISO 9001:2015, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stated. Technical and quality requirements referenced by R or I numbers are incorporated by authority of the DLA Master List, and the revision in effect at the solicitation or award date controls depending on acquisition size. Unit of issue is each, and the delivery destination is CAMP LEMONNIER, DJIBOUTI, under a joint task force contract with transportation governed by DLAD procedure notes. Item unique identification is not required per customer request, and all documentation must align with DLA packaging standards and government-specific identification protocols. The contract was posted on July 20, 2026, with a response deadline of July 28, 2026, under solicitation SPE4A0-26-T-3952, managed by the Department of Defense’s Aviation Supply Chain ESOB.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADEDThe contract solicitation SPE4A6-26-T-00QM calls for the procurement of two grooved headed pins with the NSN 5315-01-517-8894, to be delivered within ten days of award to a military installation in Drawsko Pomorskie, Poland. The item is classified as a critical component requiring source inspection, with acceptance governed by inspection at origin under RQ009 and RQ011, meaning the contractor must demonstrate conformance prior to shipment and the government retains final acceptance authority at that point. Technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, with specific sampling mandates requiring compliance with MIL-STD-1916 or ASQ H1331 Table 1, zero non-conformances in sample lots under MIL-STD-105/ASQ Z1.4, and designated verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The contractor must maintain a tailored ISO 9001:2008 quality management system excluding clause 7.3 or an equivalent such as SAE AS9003, ensuring robust manufacturing controls. Packaging must conform to MIL-STD-2073-1E and RP001, with preservation method 10 and dry climate storage, while labeling and marking must adhere to MIL-STD-129 including barcoding and RDF 555 designation. Transportation must use the fastest traceable means excluding parcel post. Export-controlled technical data associated with this item is subject to ITAR or EAR, requiring compliance with DFARS 252.225-7048, restricting access to contractors with approved US/Canada Joint Certification Program status, completed export control training, and formal DLA authorization. The solicitation mandates electronic invoicing through WAWF and adherence to a suite of federal and defense acquisition regulations, including cybersecurity safeguards under DFARS 252.204-7012, hazardous materials compliance under 29 CFR 1910.1200, and prohibitions on certain foreign-sourced telecommunications equipment. Offerors must possess a Unique Entity ID and CAGE code, represent their small business status if applicable, and disclose supplier information if providing covered defense telecommunications equipment. Pricing is not disclosed in the solicitation, and award will be based on compliance with technical, quality,
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLEThe contract specifies the procurement of 31 units of a straight, headless pin identified by NSN 5315-01-555-1099 and part number MS20253-4-550, manufactured in accordance with Drawing NR 81205 AS20253 Revision 1 dated 05/30/2001. Delivery is due in 113 days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the manufacturer’s location. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted under MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified; critical attributes require Verification Level VII or AQL 0.1, major attributes Level IV or AQL 1.0, and minor attributes Level II or AQL 4.0. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements RP001, and all marking and labeling must adhere to physical identification standards RQ017. The item is designated as a critical application item, and all government identification must be removed from non-accepted supplies per RQ011. The delivery destination is DLA Distribution San Joaquin in Tracy, CA, with a required ship date of November 19, 2026, and the original delivery date was October 14, 2026. The contract is issued under solicitation SPE4A6-26-T-07WY, with unit of issue in each, and all terms override any conflicting standards unless explicitly amended.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
O-RINGOfferors responding to solicitation SPE7L1-26-T-856G for O-RING NSN 5331-00-242-0516 must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with the threshold now set at $150,000, and must disclose any non-domestic materials used. The use of additive manufacturing for any part is prohibited unless explicitly approved by the contracting officer, and offers containing such items will be deemed ineligible for award. Fast Pay is not applicable, and bidders are strongly urged to quote quantity ranges to accommodate fluctuating demand and avoid administrative delays, though this does not apply to Auto IDC. Offerors must also certify that they will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required representations for designated categories under FAR provisions 52.212-3 and 52.219-1. All contractors must prepare for mandatory access to the Vendor Shipment Module through DLA’s new Account Management & Provisioning System, with web service users required to update their schema by the specified deadline to maintain shipping capability. Failure to register via AMPS will prevent shipment to DLA. Offerors unable to submit a bid by the closing date must still register a “No Bid” on DIBBS with an anticipated quote date or reason to avoid assumption of non-procurability. The delivery deadline is 175 days after award, with a response deadline of July 31, 2026, and inquiries should be directed to Kristie Fown at DLA.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIREThe contract specifies the procurement of one unit of rope, wire with NSN 4010-01-732-4216, valued at $815.00, under solicitation SPE4A5-26-T-295W, with delivery required within 20 days after award, by July 14, 2026, to be shipped FOB origin to the Explosive Ordnance Disposal Group 1 at 3500 Attu Rd, Building 104, San Diego, CA 92155-5584. All items must be packaged in accordance with ASTM D3951, but DLA Master List of Technical and Quality Requirements supersede any conflicting requirements, and packaging must be marked and labeled per MIL-STD-129 with unit of issue and quantity per unit pack clearly indicated. Palletization must conform to RP001 DLA Packaging Requirements for Procurement. Sampling for inspection must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with zero non-conformances required in the sample lot unless otherwise specified; attributes are to be classified as Critical, Major, or Minor with corresponding verification levels or AQLs, and manufacturers may choose attribute or variable inspection methods. Physical identification of bare items must comply with RQ017, and government identification must be removed from non-accepted supplies per RQ011. Inspection and acceptance occur at origin, and the contractor must maintain a quality assurance system compliant with SAE AS9003 or ISO 9001 tailored to AS9003. The item is designated as a critical application requiring CMMC Level 2 cybersecurity self-assessment, with safeguarding of covered defense information governed by 252.204-7008 and NIST SP 800-171 DOD assessment requirements. Transportation must be traceable, and parcel post is prohibited. Contractors must comply with hazardous material labeling under 29 CFR 1910.1200 and prohibition of hexavalent chromium per 252.223-7008, and adhere to employment equity, anti-trafficking, and eligibility verification clauses. Invoices must be submitted via WAWF. The contractor must represent its size and socioeconomic status, including UEI
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
CHAIN, WELDLESSThis contract specifies the procurement of 90 units of a weldless chain made from corrosion-resistant steel, with a stock thickness of 0.035 inch, measuring 8 inches in length and classified as Type 2 Class 3 Size 35, identified by part number NAS1455C35-8 and NSN 4010-00-142-6300. The chain meets the requirements of NAS1455 Revision 2 dated 09/19/2014 and references RR-C-271H(1) Revision 1 dated 01/03/2022, and is designated as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards, and include mandatory packaging, marking, and inspection protocols per MIL-STD-129, ASTM D3951, and DLA-specific provisions RP001, RQ011, RQ017, and RQ001. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise specified; inspection and acceptance occur at origin, and item unique identification is not required per the service customer’s request. The chain must be delivered FOB origin within 145 days, with an original required delivery date of September 12, 2026, and a need ship date of September 15, 2026. No quantity variance is permitted; the contract mandates exact compliance with the 90-unit order. Packaging must adhere to DLA requirements, including palletization per RP001 and labeling per MIL-STD-129, with unit of issue as EA. Measuring and test equipment must be calibrated and traceable per RT001. Deliveries are to be shipped to DLA Distribution Jacksonville at the specified address, with transportation governed by DLAD Proc Notes C19 and C20. The contract was solicited under SPE4A5-26-T-070W, with a response deadline of July 23, 2026, and is administered by the Department of Defense, ASC Supplier Operations OEM Division, with Hien-Van Trinh as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 484220
New
DIBBS
Domestic Freight & Delivery LogisticsThe contract requires the transportation and final delivery of packaged bevel gears from the manufacturer to Fort Stewart, Georgia, with strict compliance to tracking and chain-of-custody documentation throughout the entire logistics process. The shipment must be handled with precision to ensure accountability, security, and timely arrival at the designated military installation, as failure to maintain proper documentation could result in non-compliance. The NAICS code 484220 indicates this is a specialized motor freight transportation service, emphasizing the need for experienced carriers familiar with defense-related shipments and secure logistics protocols. This subcontract, issued under the Department of Defense via LSO Combat Vehicles and Armament, has a narrow response window, with submissions due by July 23, 2026, following a posting date of July 20, 2026. The place of performance is clearly defined as Fort Stewart, GA, with the zip code 31314-0000, and the contract requires full visibility of the shipment from origin to destination. While no specific point of contact is listed, all bidders must adhere to the DIBBS platform requirements and ensure their proposals meet the stringent documentation and delivery standards expected for defense logistics operations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 561990
New
DIBBS
Packaging, Labeling & Compliance ServicesThe contract requires full compliance with MIL-STD-129 standards for the packaging and labeling of a bevel gear, ensuring that all components are properly identified, documented, and secured for military logistics and handling. This includes adherence to hazard communication protocols and preservation methods to protect the gear from corrosion, damage, and environmental degradation during storage and transit. All packaging materials and labeling must meet exacting military specifications to guarantee traceability, readiness, and operational suitability upon arrival at the designated location. Performance is mandated at Fort Stewart, Georgia, with a strict deadline for response on July 23, 2026, and the solicitation falls under the NAICS code 561990 for other support services. The contract is structured as a subcontract within the Department of Defense's Combat Vehicles and Armament program, emphasizing the critical nature of the component and the need for precise, certified handling. The deliverable is not merely physical packaging but a fully compliant system integrating labeling, hazard documentation, and preservation to support defense supply chain integrity.
All Other Support Services

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
Precision Gear ManufacturingThe contract mandates the manufacturing of a single precision bevel gear to meet stringent military or industrial standards, encompassing the full production lifecycle from material selection through final certification. The gear must be fabricated using controlled processes including CNC machining for dimensional accuracy, followed by appropriate heat treatment to ensure mechanical integrity and durability under operational stress. Comprehensive inspection protocols are required to verify compliance with technical specifications, and formal certification documentation must accompany delivery to confirm adherence to applicable standards. All work is to be performed in accordance with the NAICS code 332996, which pertains to other fabricated metal product manufacturing, and must be completed at the designated place of performance in Fort Stewart, Georgia, with a response deadline of July 23, 2026. The contract is solicited as a subcontract under the Department of Defense, specifically through LSO Combat Vehicles and Armament, and is intended to support defense-related equipment needs.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 312230
New
DIBBS
Hazardous Materials Packaging & Labeling ComplianceThe contract requires comprehensive packaging, labeling, and safety documentation services for hazardous materials in strict compliance with federal and Department of Defense standards, including MIL-STD-129, ASTM D3951, and OSHA’s Hazard Communication Standard. All activities must encompass palletization, accurate hazard labeling, and timely submission of Safety Data Sheets to ensure regulatory adherence across all phases of material handling and transportation. The work is essential to maintaining safety and operational readiness for defense-related logistics. Performance is designated for Barstow, California, with a ZIP code of 92311-5015, and the contract is classified as a subcontract under NAICS code 312230. The solicitation was posted on July 20, 2026, with a firm response deadline of July 31, 2026. The contracting entity is the Department of Defense, specifically under LSO Combat Vehicles and Armament, indicating the materials involved are critical to military vehicle and weapon systems operations. Compliance with all required standards is non-negotiable, and failure to meet documentation or labeling requirements could result in rejection or non-performance penalties.
Tobacco Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight Shipping (FOB Origin)The contract requires the arrangement and timely execution of shipment for a packaged component from the manufacturer to a carrier within five days of contract award, adhering strictly to FOB ORIGIN terms, which place responsibility for transportation and risk on the buyer once the goods leave the seller’s location. The procurement is categorized under NAICS code 484220, indicating it pertains to truck transportation of freight, and is structured as a subcontract under the Department of Defense’s LSO Combat Vehicles and Armament office, with performance location specified in Barstow, California, 92311-5015. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, and is accessible via the DIBBS portal for interested parties to submit proposals.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Safety Data ManagementThe contract requires identification of hazardous materials and the generation of OSHA-compliant Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and Federal Standard No. 313, ensuring proper documentation of chemical hazards. It also mandates the creation and application of accurate hazard warning labels that meet federal regulatory requirements for workplace safety. The work must be performed to support the Department of Defense’s LSO Combat Vehicles and Armament division, with performance localized to Barstow, California, ZIP code 92311-5015. This is a subcontract under NAICS code 541690, with a submission deadline of July 31, 2026, and the solicitation was posted on July 20, 2026. All deliverables must reflect strict adherence to federal standards for hazard communication and material safety compliance.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and labeling services for military components in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring the use of approved materials and container types to maintain component integrity during storage and transit. All work must adhere to the detailed technical specifications outlined in these military directives to guarantee long-term preservation and readiness for deployment under demanding environmental conditions. The service is issued as a subcontract under the NAICS code 561910, with performance required at Barstow, California, with a ZIP code of 92311-5015. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. The contracting activity is under the Department of Defense, specifically the LSO Combat Vehicles and Armament organization, indicating the components are critical to military vehicle and weapon systems. Participation is restricted to subcontractors capable of meeting rigorous government packaging and preservation requirements with full traceability and documentation.
Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Precision Manufacturing of Defense Vehicle ComponentA single unit of a LATCH, DOOR, VEHICULA with NSN 2540-01-662-1865 is being manufactured to exact military specifications covering material composition, dimensional tolerances, and performance criteria. The work must adhere strictly to defense standards to ensure compatibility and reliability in combat vehicle applications. This subcontract opportunity is issued under NAICS code 332999 and requires full compliance with all technical and quality assurance requirements outlined for military-grade components. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026. The place of performance is designated as Barstow, California, with ZIP code 92311-5015. The contract is managed under the LSO COMBAT VEHICLES AND ARMAMENT division of the Department of Defense. Interested parties must submit proposals through the official DIBBS portal prior to the deadline to be considered for award.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484121
New
DIBBS
Transportation and Shipment Logistics ServicesThe contract seeks a subcontractor to manage the end-to-end transportation and shipment of goods from origin to government-designated destinations under strict military shipping standards. All logistics must include automated tracking throughout the journey to ensure complete visibility and accountability in compliance with Department of Defense requirements. Performance is specifically tied to the location of Barstow, California, with the zip code 92311-5015 designated as the primary place of performance. The solicitation falls under NAICS code 484121, which categorizes it as surface transit freight transportation services, and it was posted on July 20, 2026, with a response deadline of July 31, 2026. The contracting entity is the LSO Combat Vehicles and Armament division within the Department of Defense, indicating the nature of cargo will likely involve military equipment and armaments requiring secure, reliable, and regulated transit protocols.
General Freight Trucking, Long-Distance, Truckload

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Radioactive Materials Handling and Labeling (If Applicable)This contract pertains to the specialized labeling, classification, and documentation of radioactive materials in shipments, strictly aligned with updated MIL-STD-129 and applicable nuclear regulatory standards. The work involves ensuring all radioactive cargo is accurately identified, properly classified according to federal and military guidelines, and accompanied by complete, compliant documentation to support safe transport and handling throughout the supply chain. Compliance with these rigorous standards is mandatory to meet Department of Defense safety and operational requirements. The contract is structured as a subcontract under NAICS code 541690, with a solicitation response deadline of July 31, 2026, and was posted on July 20, 2026. Performance is required at Barstow, California, ZIP 92311-5015, under the oversight of the LSO Combat Vehicles and Armament office within the Department of Defense. The scope demands precise adherence to current military and nuclear regulations, with no flexibility in labeling protocols or documentation formats, and success will depend on demonstrable expertise in hazardous materials handling, regulatory compliance, and quality-controlled documentation processes.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract seeks services to ensure full hazard communication compliance for hazardous materials included in supplied goods, encompassing the preparation of safety data sheets, accurate hazard labeling, and all necessary regulatory documentation. The contractor must align with applicable standards to support safe handling, storage, and transportation of hazardous substances throughout the supply chain. This subcontract is focused on delivering consistent, auditable, and compliant hazard communication practices tailored to the needs of the Department of Defense. Performance of this work is required at BARSTOW, CA, with a response deadline of July 31, 2026. The North American Industry Classification System code is 541690, indicating professional, scientific, and technical services related to environmental safety and regulatory compliance. The solicitation is issued under the LSO Combat Vehicles and Armament office, reflecting the defense sector’s critical need for precise and legally compliant hazard management in equipment and material logistics. All deliverables must meet federal requirements without exception, and the contractor is expected to maintain rigorous documentation and ongoing regulatory adherence.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336340
New
DIBBS
Procurement and Supply of Vehicle Sun Visors (NSN: 2540016525840)The contract pertains to the supply, packaging, labeling, and delivery of vehicle sun visors identified by NSN 2540016525840, with strict adherence to military standards for marking, barcoding, and logistics tracking to ensure full compliance with DoD operational requirements. All items must be manufactured and packaged to meet specified technical and procedural guidelines to support seamless integration into military vehicle systems and supply chains. The procurement is classified as a subcontract under NAICS code 336340, indicating it falls within the motor vehicle parts manufacturing sector, and is being managed by the LSO Combat Vehicles and Armament office under the Department of Defense. Performance of the contract is required at the designated location in Barstow, California, with zip code 92311-5015, and all deliveries must be completed in alignment with military logistics protocols. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, providing a narrow window for qualified subcontractors to submit proposals. There is no set-aside designation specified, meaning the contract is open to all eligible vendors regardless of size or status. While no point of contact is listed, all inquiries and submissions must be processed through the official DIBBS portal linked in the documentation. The focus remains on delivering high-quality, standardized sun visors that meet exacting military specifications, ensuring reliability, traceability, and readiness for deployment across combat vehicle fleets.
Motor Vehicle Brake System Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details