Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ROPE, WIRE

Active
SPE4A5-26-T-177PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits one unit of wire rope identified by NSN 4010-01-732-4214 with a delivery requirement of 20 days after award. The solicitation number is SPE4A5-26-T-177P, issued on July 22, 2026, with responses due by July 27, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies. Measuring and test equipment must be adequate and calibrated. The place of performance is Virginia Beach, Virginia, and the contracting office is the ASC Supplier Oper OEM Division under the Department of Defense. All information related to covered defense information is subject to applicable controls. The primary point of contact is Hien-Van Trinh, reachable via email and phone provided.

General Info

One unit of wire rope NSN 4010-01-732-4214 due in 20 days, Virginia Beach, DLA standards, solicitation SPE4A5-26-T-177P.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

2520 MIDWAY ROAD SUITE 100, VIRGINIA BEACH, VA, 23459, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-177P for DLA Aviation Supplies

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ROPE,WIRE
ROPE,WIRE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
ADEQUATE DATA FOR THE NSN/Part Number: 4010-01-732-4214 Quantity: 1 EA Purchase Request: 7016833186QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
Steel Welded Wire Fabric SupplyThe contract calls for the supply of ten rolls of steel welded wire fabric featuring a 6-inch by 6-inch mesh pattern, with individual filaments measuring 0.1920 inches in diameter, each roll being 60 inches wide and 150 feet long. All materials must strictly comply with the ASTM A1064/A1064M standard as revised in April 2024, ensuring the product meets specified strength, durability, and manufacturing criteria. The procurement is structured as a subcontract under the NAICS code 332618, which classifies it within the fabricated metal product manufacturing sector. The place of performance is designated as New Cumberland with a zip code of 17070-5002, and the contracting activity is tied to the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The solicitation was posted on July 22, 2026, and responses must be submitted no later than August 3, 2026, with all bids submitted through the DIBBS portal via the provided link.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADEDThe item specified is a PIN, SHOULDER, HEADED, classified as a commercial off the shelf (COTS) product with NSN 5315-01-616-9618 and a quantity of 44 units. The purchase request number is 7017571832 with a delivery requirement of 170 days after order. Item Unique Identification is not required as per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs this exception. The solicitation number is SPE4A5-26-T-306A, issued on July 22, 2026, with responses due by July 30, 2026. The NAICS code is 332618, and the contracting organization is the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. Performance is required at New Cumberland, Pennsylvania, 17070-5002, with Courtney Minor as the primary point of contact. Technical and quality requirements referenced under R and I codes are sourced from the DLA Master List, with revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging requirements, and documentation for source approval must meet RC001 standards. Government identification must be removed from non-accepted supplies as per RQ011.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE FABRICContract SPE8E4-26-T-1908 specifies the procurement of 10 rolls of steel welded wire fabric, each roll measuring 60 inches wide and 150 feet long, with a square mesh of 6 inches by 6 inches and filament size of 0.1920 inches, featuring unfinished edges. The product must comply with ASTM A1064/A1064M Revision dated April 15, 2024, and is subject to technical and quality requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over all other standards including ASTM D3951. Each shipment requires a Certificate of Quality Compliance or Mill-Material Certification, with copies provided to both the recipient and the DLA Troop Support Contracting Officer. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are verified at specified levels. Packaging must conform to MIL-STD-129 and DLA Packaging Requirements RP001, with palletization and unit packing as defined, while transport and delivery are governed by DLA procedural notes. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with delivery due 167 days after contract award under FOB Origin terms, no quantity variance permitted, and inspection and acceptance occurring at the destination. The purchase request number is 7017585539, with the original required delivery date of February 18, 2027, and a need ship date of January 18, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADEDThe contract specifies the procurement of two grooved, headed pins with NSN 5315-99-760-9954 and part number PE21833 from Pearson Engineering Limited, under solicitation SPE4A7-26-T-590M. Delivery is required within five days of award, FOB origin, with inspection and acceptance occurring at the destination—Anniston Army Depot in Anniston, Alabama. The units must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA’s RP001 packaging requirements; all DLA Master List of Technical and Quality Requirements supersede any conflicting standards. Sampling for quality verification must comply with MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance criteria unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are deemed major. The pins must be physically marked per RQ017, and government identification must be removed from non-accepted items per RQ011. Documentation for source approval, packaging compliance, and technical specifications are governed by the DLA Master List, with revisions tied to the solicitation or award date depending on acquisition size. Shipping must use the fastest traceable method, excluding parcel post, and is directed to the Anniston Depot with specific marking and contact details provided for government use. The unit price is $2.00 per piece, totaling $4.00, with no variance allowed in quantity. The required delivery date is July 17, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASEThe contract pertains to the procurement of 15 quick release pins identified by NSN 5315-01-677-2982 under solicitation SPE7L5-26-T-4543, with a delivery requirement of 105 days after delivery order issuance. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. The item involves technical data subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure, including to foreign nationals within the United States. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training and the DLA questionnaire, and receive formal approval from DLA to access the controlled data. DFARS 252.225-7048 applies to all handling and dissemination of this technical data. The procurement is managed by the Department of Defense through Land Supplier Opns Engines, with performance occurring in Albany, Georgia, and point of contact Bradley Evans reachable via email and phone. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under a federal contract type and NAICS code 332618.
LAND SUPPLIER OPNS ENGINES

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIREThe contract solicitation pertains to the procurement of one unit of ROPE, WIRE with NSN 4010-01-732-4216, under solicitation number SPE4A5-26-T-177M, with a response deadline of July 27, 2026. Delivery is required within 20 days of award, and the place of performance is specified as Virginia Beach, Virginia. The acquisition is governed by the DLA Master List of Technical and Quality Requirements, where referenced technical and quality standards identified by R or I numbers are binding and must be adhered to; the applicable revision depends on whether the procurement is classified as simplified or large, with the controlling revision determined by the solicitation issue date, award date, or an amendment if applicable. The contract incorporates DLA packaging requirements, tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, inspection and acceptance at origin, removal of government identification from non-accepted items, and physical identification or bare item marking. Measuring and test equipment must meet specified standards, and the item is subject to covered defense information protocols. The contracting activity is the ASC Supplier Oper OEM Division within the Department of Defense, with point of contact Hien-Van Trinh reachable via email and phone for inquiries.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332618
New
DIBBS
RETAINER, CYLINDER PThe contract involves the procurement of two RETAINER, CYLINDER P units with NSN 5315-99-748-3706 from PEARSON ENGINEERING LIMITED, with a delivery requirement of five days after award to the Anniston Army Depot in Alabama. The solicitation number is SPE4A6-26-T-09BC, issued on July 22, 2026, with responses due by July 30, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Pricing is estimated between $399.70 and $1,370.00 based on historical unit costs of $199.85 to $685.00. Delivery is FOB Destination, meaning the contractor assumes all transportation risk and cost until the items reach the consignee at Building 361, 7 Frankford Avenue, Anniston, AL 36201-5021. The contract strictly enforces packaging and marking compliance with ASTM D3951 and MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any conflicting standards. Palletization must adhere to RP001, and all units require proper hazardous material labeling per 29 CFR 1910.1200 and barcode compliance via MIL-STD-129. Inspection and acceptance occur at destination by the Government, with compliance verified through receiving reports per DFARS Appendix F. The contract incorporates multiple FAR and DFARS clauses mandating equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material safety, cybersecurity safeguards including DFARS 252.204-7012, prohibitions on covered telecommunications equipment, whistleblower rights, and restrictions on mandatory arbitration. Invoicing is exclusively through WAWF, and payment routing is managed via DoDAAC codes. Offerors must provide a Unique Entity Identifier and CAGE code, and if claiming small business status, certify eligibility under WOSB, SDVOSB, HUBZone, or SDB programs. Affirmative responses concerning covered defense telecommunications equipment trigger detailed disclosures of equipment and vendor information. The award is expected to follow a Lowest Price Technically Acceptable (LPTA) basis, with price preferences applied for qualified small businesses, though no formal evaluation factors or weights are specified in the
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,The contract is for the procurement of four wire rope assemblies with NSN 4010-01-630-9932, issued under solicitation SPE4A5-26-T-305W by the Defense Logistics Agency’s ASC Supplier Oper OEM Division. Delivery is required within 78 days of award, and responses must be submitted by July 30, 2026. The item is subject to strict technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance enforced through identified R and I numbers. Cybersecurity compliance is mandated through CMMC Level 2 certification for any third-party assessors involved. Packaging must adhere to DLA’s procurement standards, and any non-accepted supplies must have government identification removed. Export control regulations apply due to technical data governed by ITAR or EAR, prohibiting any unauthorized disclosure or transfer to foreign persons or entities, including foreign nationals within the U.S., and DFARS 252.225-7048 is fully applicable. Access to export-controlled data is restricted to contractors holding approved US/Canada Joint Certification Program status, having completed mandatory DOD export control training, and being formally authorized by DLA. Performance is to occur in Tracy, California, with Hien-Van Trinh designated as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, SPRINGThe contract specifies the procurement of 3 spring pins with NSN 5315-01-656-4877 under solicitation SPE4A6-26-T-09BG, requiring delivery within 20 days FOB origin with no tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, adhering to DLA packaging requirements with a unit of issue as individual units. The items shall be shipped via traceable freight methods to the designated government receiving facility at JB MDL NJ, not by parcel post, and must be palletized as specified. Technical and quality requirements are governed by the DLA Master List referenced in the contract and are binding based on the applicable revision timing relative to solicitation or award dates. Acceptance and inspection occur at the destination, and special marking codes indicate no additional identification beyond standard requirements. The contract is for federal use only, with a required delivery date of July 16, 2026, and the point of contact for inquiries is Debra Fowler at DLA.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
Supply of Wire Fencing (NSN 5660-01-447-2307)
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
Supply of Quick Release Pins (NSN 5315-01-696-3814)
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332618
New
DIBBS
Precision Spring Manufacturing
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 334519
New
DIBBS
Defense Instrument Bezel Manufacturing and DeliveryA single precision instrument mounting bezel, identified by NSN 6695011227941, must be manufactured, packaged, marked, and delivered in full compliance with all applicable military packaging, marking, and inspection standards to DLA San Diego, with the final destination zip code 92136-3581. The work falls under NAICS code 334519 and is structured as a subcontract opportunity issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a firm response deadline of July 30, 2026, and the solicitation posted on July 22, 2026. All aspects of fabrication, labeling, and shipment must align with federal defense requirements to ensure acceptance upon delivery.
Other Measuring and Controlling Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
Electrical Component Supply – BACKSHELL, ELECTRICA (NSN 5935016607702)The contract requires the supply and delivery of 14 units of a military-specified electrical backsell component identified by NSN 5935016607702, with strict adherence to military packaging standards outlined in MIL-STD-2073-1E and marking requirements under MIL-STD-129. Each unit must be properly labeled, documented, and packaged to ensure compatibility with Department of Defense logistics and handling protocols. Additionally, Safety Data Sheets compliant with OSHA regulations must be submitted to meet hazmat and occupational safety requirements. The component is intended for performance at Tinker Air Force Base, with the contract classified as a subcontract under NAICS code 335931. The solicitation was posted on July 22, 2026, and responses are due by July 30, 2026, with the procuring entity being the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense.
Current-Carrying Wiring Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
DIBBS
Technical Data and Configuration Management SupportThe contract seeks support for technical data and configuration management within the manufacturing compliance framework, focusing on the administration of engineering change proposals, variance requests, and associated configuration documentation. The work is tied directly to maintaining accurate, compliant technical records essential for production and quality control, ensuring all modifications are properly tracked, approved, and implemented in alignment with defense manufacturing standards. The performance location is designated as Tinker Air Force Base with a zip code of 73145-8000, indicating the operational context is centered on Department of Defense logistics and sustainment activities. This is a subcontract under NAICS code 541611, which classifies it as scientific and technical consulting services, and it was posted on July 22, 2026, with a response deadline of July 30, 2026. The contracting office is the ASC Supplier Operations OEM Division, operating under the Department of Defense, and the acquisition is facilitated through the DIBBS system. Although no set-aside type or point of contact is specified, the nature of the work implies a need for experienced technical personnel capable of navigating complex engineering change processes in a high-compliance defense environment, with exacting standards for documentation and configuration control.
Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThe contract entails comprehensive quality assurance and inspection services to ensure complete compliance with MIL-STD-1916 standards, requiring zero non-conformances across all deliverables. This subcontract is governed by FAR 52.246-2, mandating rigorous final inspection and quality verification protocols to confirm that all products and processes meet stringent military specifications. The work is to be performed at Tinker Air Force Base, Oklahoma, with a response deadline of July 30, 2026, and the solicitation was posted on July 22, 2026. The NAICS code 541330 identifies this as engineering services, aligning with technical inspection and quality control activities. The contracting authority is the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, indicating this effort supports critical defense supply chain requirements.
Engineering Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires comprehensive identification, labeling, and documentation of hazardous materials contained within packaging or components, ensuring strict adherence to OSHA and Department of Defense standards. All work must be performed to meet federal regulatory requirements for safety, handling, and compliance, with a focus on accurate and traceable recordkeeping throughout the supply chain. The performance location is Tinker Air Force Base, Oklahoma, and the work is classified as a subcontract under NAICS code 541690, indicating it involves other scientific and technical consulting services. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, leaving a limited window for interested parties to submit proposals. Although no set-aside information is provided, the contract is issued by the ASC Supplier Operations OEM Division under the Department of Defense and is accessible via the DIBBS platform. The absence of a point of contact suggests interested respondents should rely on the official DIBBS portal for submission details and inquiries. Strict compliance with hazardous materials protocols is non-negotiable, and failure to meet labeling or documentation criteria will result in rejection.
Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Preservation ServicesThe contract requires military-compliant packaging, preservation, and container marking for precision shims in accordance with Defense Logistics Agency standards, ensuring the components are protected against damage, corrosion, and environmental degradation during storage and transit. All work must adhere strictly to DLA specifications for material handling, labeling, and documentation to maintain readiness and traceability throughout the defense supply chain. The performance location is Tinker Air Force Base with a zip code of 73145-8000, indicating the work must be executed to support Department of Defense logistics operations in that region. This is a subcontract under the NAICS code 493190 for other transportation support activities, issued by the ASC Supplier Operations OEM Division. The opportunity was posted on July 22, 2026, with a response deadline of July 30, 2026, leaving a limited window for qualified vendors to submit proposals. The contract is not subject to any specific set-aside designation, making it open to eligible subcontractors regardless of business size or status, provided they can meet the technical and regulatory demands of military-grade packaging and preservation for precision aerospace components.
Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Precision Shim Manufacturing and SupplyThe contract involves the manufacture and delivery of 70 precision shims identified by NSN 5365-01-210-1705, built to meet stringent military specifications covering technical requirements, packaging, and marking standards. All work must align with the defined quality and compliance benchmarks expected for defense-grade components, ensuring reliability and interoperability within military systems. The performance location is set at Tinker Air Force Base with a zip code of 73145-8000, and the procurement is categorized as a subcontract under NAICS code 332510, indicating it falls within the industrial machinery and component manufacturing sector. The contract is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a posted date of July 22, 2026, and a response deadline of July 30, 2026. Bidders must submit proposals within this window to be considered, and all deliverables are expected to fulfill the technical and logistical conditions prescribed by the military. The solicitation is accessible via the DIBBS platform, and while no specific set-aside classification is identified, full compliance with federal contract regulations and defense supply chain protocols is mandatory.
Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488490
New
DIBBS
Packaging, Labeling, and Transportation ComplianceThe contract requires strict adherence to DLA packaging standards outlined in RP001, ensuring all items are prepared and contained according to military specifications. It mandates the application of MIL-STD-129 labels to all shipments for proper identification and traceability throughout the supply chain. Domestic logistics must be coordinated to deliver materials to DLA Distribution San Joaquin in Tracy, California, with full compliance for hazardous materials documentation and procedures. If ocean transport is involved, international shipping regulations and compliance protocols must be observed and maintained. All recordkeeping for hazardous materials must be accurate, up-to-date, and available for audit. The subcontract is issued under NAICS code 488490 and is part of a Department of Defense procurement initiative managed by the ASC SUPPLIER OPER OEM DIVISION. Responses are due by July 30, 2026, with the solicitation posted on July 22, 2026, and performance expected to be localized to the Tracy, CA, area with a zip code of 95304-5000.
Other Support Activities for Road Transportation

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Technical Data and Documentation SupportThe contract requires the preparation and submission of comprehensive technical data packages for both approved and alternate parts, ensuring full compliance with defense standards. This includes supplying source approval documentation, detailed test data, and all necessary records to validate part eligibility and performance under military specifications. The work is scoped to support defense procurement needs through accurate, auditable technical documentation that facilitates part certification and supply chain continuity. Performance of this subcontract is anchored at Tracy, California with a zip code of 95304-5000, and is issued under the NAICS code 541330 for engineering services. The procurement is managed by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense, with a response deadline of July 30, 2026. The contract is classified as a subcontract and does not specify any set-aside program. All deliverables must meet rigorous defense quality and compliance requirements to ensure operational readiness and regulatory adherence.
Engineering Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
Precision Machined Component Supply – Ball and Seat AssemblyThe contract requires the manufacture and delivery of three precision-machined Ball and Seat Assemblies designated by NSN 1630-01-036-6507, fully compliant with applicable military specifications. The supplier must provide a complete technical data package to support production and ensure adherence to required standards. Quality assurance protocols include sampling procedures to verify conformance, and all components must be packaged and labeled according to military and logistics guidelines to ensure proper handling and identification throughout the supply chain. The place of performance is specified as Tracy, California, with the end user being the Department of Defense under the ASC SUPPLIER OPER OEM DIVISION. The solicitation was posted on July 22, 2026, with responses due by July 30, 2026, and the contract type is classified as a subcontract under NAICS code 332721 for precision machining services.
Precision Turned Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ServicesThe contract seeks the development and application of hazard communication materials compliant with OSHA and DFARS standards for hazardous materials used in cleaning or preservation processes. This includes the creation of appropriate labels and safety data sheets that align with federal regulatory requirements to ensure proper handling, storage, and disposal of hazardous substances throughout the supply chain. The work is tied to a subcontract under the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION and requires adherence to strict compliance frameworks for workplace safety and defense supply chain security. Performance is designated for New Cumberland, Pennsylvania, with a response deadline of July 30, 2026, and the solicitation was posted on July 22, 2026. The North American Industry Classification System code 541690 indicates this is for other scientific and technical consulting services, specifically focused on hazard communication and regulatory documentation. The contractor must deliver materials that integrate seamlessly into existing DoD operational protocols, ensuring full compliance without disruption to maintenance or preservation activities involving hazardous agents.
Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Palletization and DLA-Compliant Shipping PreparationThe contract requires precise palletization of packaged units in full compliance with DLA RP001 standards to ensure stable, secure, and regulatory-compliant shipping to DLA distribution centers. All work must adhere strictly to established protocols for load stability, labeling, and handling to meet military logistics requirements, with performance centered on operational readiness and supply chain integrity. The scope applies to all phases of pallet preparation, from unit arrangement to securing and documenting shipments for transport. This subcontract is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a place of performance located in New Cumberland, Pennsylvania, at zip code 17070-5002. The solicitation, identified by the NAICS code 484220, was posted on July 22, 2026, and responses are due by July 30, 2026. Interested parties must submit proposals through the designated DIBBS platform before the deadline to be considered for award. The contract emphasizes strict adherence to technical specifications, timeliness, and compliance to support Department of Defense distribution operations without disruption.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details