Rotary Forge Rifling

W9098S-17-T-0179 Synopsis: The Army Contracting Command- Rock Island (ACC-RI), Rock Island Arsenal- Joint Manufacturing and Technology Center (RIA-JMTC) Branch is issuing solicitation W9098S-17-T-0179 for Rotary Forge Rifling Services as described in the instructions to offers. Vendors shall have experience providing in the regular course of business the requested Rotary Forge Rifling Services. General requirements. This requirement is for a single firm fixed price (FFP) type purchase order with a possible option. Quantities will be identified in the solicitation. This solicitation is issued unrestricted with no set aside. Estimated Solicitation Release Date: 11 September 2017 Estimated Response Date: 10 October 2017 A copy of the drawings can be requested using the following link: https://www.fbo.gov/fedteds/W9098S17P054838 Note that your company must be registered with an active status in System for Award Management (SAM), and you must have a current DD2345 on file and have an active status in Joint Certification Program (JCP). Only the data custodian listed on the DD2345 will be granted access to the drawings. If you need assistance with JCP please visit their site at https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx. For assistance with SAM please visit https://www.sam.gov/portal/SAM/#1. Neither ACC-RI nor RIA-JMTC administer these sites, so you must contact JCP or SAM directly for help. The North American Industry Classification (NAICS) is 332994 Small Arms, Ordnance, and Ordnance Accessories Manufacturing. The Federal Supply Code (FSC) is 1035. This solicitation is being issued electronically in accordance with FAR 4.502, therefore, hardcopies will not be provided. Vendors wishing to obtain an electronic copy may download it on or after the solicitation issue date by accessing the Federal Business Opportunities webpage at https://www.fbo.gov/. All dates in this announcement are subject to change. Note: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain an offeror's mailing list. It is therefore incumbent upon any interested parties to periodically access the above internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and respond to them prior to the date and time set for receipt of proposals may render your offer/proposal non-responsive and result in the rejection of the same. All responsible sources may submit a proposal which shall be considered by the government. Request that inquiries be in writing only; telephone inquiries will not be entertained. Requests can be sent to Trisha Allers, Contract Specialist, at patricia.e.allers.civ@mail.mil. Additional information/instructions for each CLIN Drawing Number CLIN Quantity Comment 3269422 Rev R 0001 35 each FAT 3269422 Rev R 0002 100 each Production 11825987 Rev AA 0003 35 each FAT 11825987 Rev AA 0004 370 each Production 13022946 Rev B 0005 35 each FAT 13022946 Rev B 0006 625 each Production Drawing 3269422: Apply Rifling for MK19 Grenade Launcher Barrel, per note detail C and not 14 on drawing. Drawing 11825987: Apply Rifling for M240 Machine Gun Barrel, per note 11 on drawing. Drawing 13022946: Apply Rifling for M249 Machine Gun Barrel, per note 5 on drawing. RIA-JMTC shall ship parts to vendor in blanks, cut to length. JMTC will allow for 20% prove/out scrap parts during the First Article Test (FAT), but will require all non-conforming parts to be returned to JMTC with the FAT shipment. Vendor shall return all parts to RIA-JMTC in appropriate container with protective layering to ensure the plating will not be damaged. The parts will be sent to vendor in multiple batches. Vendor will need to pass FAT prior to production. He vendor shall have 90 days to process the FAT batch of parts and return them to RIA-JMTC. The remaining batches will be sent in monthly quantities of approximately 100 each. The monthly quantities can be adjusted based on JMTC's manufacture time and the vendors manufacture time. The vendor shall have 30 days to complete and return to RIA-JMTC. Vendor shall be responsible for providing documentation such as Certificate of Conformance (CoC) and/or Certified Test Reports (CTR) that all parts meet the drawing specification(s) for each batch of parts. Documentation shall be shipped to JMTC with the parts in each batch, and an electronic copy shall be sent to the Contract Specialist and Performance Certifier. All Quality Assurance Provisions per drawing 12993884 apply to this requirement.