This Solicitation opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
ROTATING ASSEMBLY
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract pertains to the procurement of a rotating assembly, specifically a centrifugal pump model 6LX8 type, intended for use on Aurora horizontal systems, with the NSN 4320011094715 and part number 93FO594-13588 by Carver Pump Company. Delivery is scheduled for 197 days after award with a firm delivery date of January 30, 2027, under FOB Origin terms, meaning title and risk transfer at the manufacturer’s facility. The sole quantity ordered is one unit, with no variance allowed in quantity. Final inspection and acceptance occur at the manufacturing site, requiring the contractor to maintain a government-approved quality inspection system and make the latest revision drawings and technical data available to verify compliance. Nondestructive testing must follow MIL-STD-271, and mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional use in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable devices requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Sampling for acceptance must adhere to MIL-STD-1916 or ASQ Z1.4 with zero non-conformances required unless otherwise indicated; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, corresponding to AQLs of 0.1, 1.0, and 4.0. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, using preservation method BL (bleed/drain), drying method DRY:1, preservation material 49, unit packaging code E5, and wrap material ZZ with cushioning material AD and thickness C. Palletization must meet DLA’s RP001 requirements, and all packages must carry 2D Data Matrix barcodes for tracking. The contract includes extensive cybersecurity and information safeguarding requirements under 252.204-7012 and 52.240-93, mandating protection of covered defense information, cyber incident reporting, and adherence to NIST SP 800-171 controls. Provisions prohibit the acquisition of covered telecommunications equipment from designated foreign entities, require flow-down of critical clauses to subcontractors, and impose whistleblower protections and
General Info
Agency
NAICS
Place of Performance
PR: 7017383661 PRLI: 0001 CONT’D, BREMERTON, WA, 98314-6001, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
ROTATING ASSEMBLY. USED ON AURORA HORIZONTAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CENTRIFUGAL PUMP, MODEL 6LX8 TYPE.
SUPPLEMENTAL QUALITY ASSURANCE PROVISIONS (SQAP)
.
INSPECTION SYSTEM:
THE MANUFACTURE SHALL DESIGN AND MAINTAIN A
QUALITY INSPECTION SYSTEM, THAT IS
SATISFACTORY TO THE GOVERNMENT.
.
INSPECTION AND ACCEPTANCE OF MATERIAL:
.
FINAL INSPECTION AND ACCEPTANCE OF MATERIAL
SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.
TECHNICAL INSPECTION IS REQUIRED. THE
CONTRACTOR SHALL MAKE THE LATEST DRAWING
REVISIONS AND TECHNICAL DATA AVAILABLE TO VERIFY
THE MATERIAL MEETS ALL TECHNICAL REQUIREMENTS.
THE LATEST DRAWING REVISIONS ARE THOSE IN EFFECT
ON THE CONTRACT AWARD DATE OR AS OTHERWISE
SPECIFIED IN THE CONTRACT.
.
NONDESTRUCTIVE TESTING:
NONDESTRUCTIVE TESTING METHODS SHALL BE ACCOM
PLISHED IN ACCORDANCE WITH PROCEDURES SPECIFIED
IN MIL-STD-271, WHEN NONDESTRUCTIVE TESTING IS
REQUIRED.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SPE7M1-26-T-184Q
SECTION B
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
CARVER PUMP COMPANY 10941 P/N 93FO594-13588
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017383661 0001 AY 1.000
NSN/MATERIAL:4320011094715
DELIVERY (IN DAYS):0197
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:BL CLNG/DRY:1 PRESV MAT:49
WRAP MAT:ZZ CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3216
DLA DISTRIBUTION PUGET SOUND
467 W STREET
BLDG 467
SPE7M1-26-T-184Q
SECTION B
PR: 7017383661 PRLI: 0001 CONT’D
BREMERTON WA 98314-6001
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3216
DISTRIBUTION DEPOT PUGET SOUND
467 W STREET
BLDG 467
BREMERTON WA 98314-6001
US
Need Ship Date:01/30/2027 Original Required Delivery Date:01/30/2027
SPE7M1-26-T-184Q NSN/Part Number: 4320-01-109-4715 Quantity: 1 AY Purchase Request: 7017383661QTY: 1 Delivery: 197 days ADO
More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS