Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ROTOR, PUMP

Active
SPE7M1-26-T-268WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a ROTOR, PUMP designated by part number and drawing number 8595158, with the associated NSN 4320016475811. A total of 19 units are required to be delivered FOB origin within 165 days, with no tolerance for quantity variance. Inspection and acceptance occur at the origin, and packaging must comply with MIL-STD-2073-1E and DLA-specific packaging requirements, including marking per MIL-STD-129 with no special coding. The item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, as well as configuration control, cybersecurity compliance at CMMC Level 2, and protocols for handling government identification on non-accepted supplies. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials must be approved unless explicitly authorized. The contract is a total small business set-aside under NAICS code 333996, issued under solicitation SPE7M1-26-T-268W with a response deadline in August 2026 and a required delivery date of May 11, 2027. Delivery is directed to the DLA distribution warehouse in Tracy, California, and transportation logistics follow specified DLA procedural notes.

General Info

Procure 19 ROTOR PUMP units, part 8595158, FOB origin, CMMC Level 2, DLA packaging, delivery to Tracy CA by May 11, 2027.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

333996 - Fluid Power Pump and Motor ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7M1-26-T-268W for DLA Maritime Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ROTOR,PUMP
ROTOR,PUMP
IAW NAVY (53711) DRAWING NUMBER 8595158, PART NUMBER SAME AS DRAWING
NUMBER.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
--
FULL AND OPEN COMPETITION APPLY
--
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 53711 8595158 REVISION NR A DTD 06/11/2019 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M1-26-T-268W
SECTION B
PR: 7017775401 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017775401 0001 EA 19.000
NSN/MATERIAL:4320016475811
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:02/02/2027 Original Required Delivery Date:05/11/2027
SPE7M1-26-T-268W NSN/Part Number: 4320-01-647-5811 Quantity: 19 EA Purchase Request: 7017775401QTY: 19 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
DIBBS
RING, WEARING
Solicitation # SPE7M4-26-T-326R
The contract pertains to the procurement of a wearing ring, identified by part number 654B0312D040A and NSN 4320010509214, for use on the Warren Model 4TDHA6. A total of 19 units are required at a unit price of $19.00, with a total contract value of $361.00. Delivery is due within 165 days from the contract award date, with shipment terms FOB origin, and the designated delivery point is DLA Distribution San Joaquin in Tracy, California. The item is classified as a critical application item, and all suppliers must comply with DLA’s packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific packaging methods, containment types, and unit packaging codes. No special marking is mandated, and palletization must adhere to DLA’s procurement guidelines. Strict environmental and safety controls are in place: mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the supplied hardware, except for specific exempted applications like batteries, fluorescent lights, instruments, sensors, weapon systems, and NAVSEA-specified reagents. Portable devices containing mercury must feature shockproof construction and a secondary containment barrier, in line with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date, depending on the acquisition type. Any configuration changes or deviations require formal engineering change proposals or variance requests. The contract also mandates removal of government identification from non-accepted supplies, and all shipments must adhere to DLA transport procedures C19 and C20. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, under the NAICS code 333996.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-26-T-268P
The contract specifies the procurement of a spring-loaded shaft seal assembly, identified by NSN 4320-01-253-9108 and part numbers 561B and BW7224 from MEGATOR CORP 52330, with a total quantity of 19 units to be delivered under solicitation SPE7M1-26-T-268P. Delivery is required within 201 days from contract award, with a mandatory ship date of March 10, 2027, and delivery must be made FOB origin. The item is designated as a critical application with strict compliance requirements, including adherence to DLA packaging standards MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. The seal assembly must not contain or come into direct contact with mercury or mercury-containing compounds, except for specific authorized exemptions such as functional mercury in batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shock-proof design and a secondary containment barrier in compliance with NAVSEA 5100-003D. All supplies must comply with DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, and government identification must be removed from any non-accepted items. Delivery is to be made to the DDSP New Cumberland Facility in Pennsylvania, with transportation governed by DLAD Proc Notes C19 and C20. The unit of issue is AY, the purchase request number is 7017780170, and the contract includes a zero variance allowance for quantity. The solicitation closed on August 20, 2026, with Michael Reese of the Department of Defense as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
Federal
43--SLEEVE,SHAFT,PUMP
Solicitation # SPE7M126T252D
The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for the procurement of two shaft sleeves for pumps, identified by NSN 4320014172775, with the approved source designated as 63857 0868B0011G018A. The requirement is part of an RFQ issued under solicitation number SPE7M126T252D, with no hard copies available and all documentation accessible exclusively online through the provided SAM.gov link. Quotes must be submitted electronically and received by the deadline of August 17, 2026, with delivery expected to W1A8 DLA Distribution within 168 days after award. The item falls under NAICS code 333996, and there is no set-aside designation, meaning all responsible sources are eligible to respond. The solicitation does not include specifications, plans, or drawings, and any potential offeror must rely on the approved source data and industry knowledge to meet requirements. All submissions must be timely to be considered, and inquiries should be directed via email to the point of contact provided, DibbsBSM@dla.mil, with additional guidance available through the DIBBS portal using the solicitation number. The contracting office is located in Columbus, Ohio, and while the delivery location is indicated, the place of performance is unspecified. The procurement is classified as combined, indicating no specific category restrictions beyond general responsibility and eligibility for federal contracting.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
Federal
43--HANDLE ASSEMBLY,PUMP
Solicitation # SPE7M126T254C
The contract solicitation is for the procurement of 17 units of NSN 4320011468338 HANDLE ASSEMBLY, PUMP, to be delivered to DLA DISTRIBUTION JACKSONVILLE within 168 days after award. Only two approved sources are listed for this item, identified by their Cage Codes 58163 and 62228, both corresponding to the same part number 2276-6. This is a Request for Quotation issued under the combined solicitation type, with no set-aside designation, and is open to all responsible sources that submit timely electronic quotes. Hard copies of the solicitation are not available, and no specifications, plans, or drawings are provided, meaning vendors must rely on the NSN and approved source information to formulate their responses. The solicitation number is SPE7M1126T254C, posted on August 6, 2026, with a response deadline of August 17, 2026. The contracting office is the DLA Land and Maritime under the Department of Defense, located in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact; no phone or in-person contact information is provided. The full solicitation and additional information can be accessed online through the SAM.gov workspace link.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
Federal
43--RING,WEARING
Solicitation # SPE7M426T317R
The contract solicitation seeks five wearing rings identified by NSN 4320010520367 to be delivered to DLA Dist San Joaquin with a delivery deadline of 168 days after award. The item is procured under solicitation number SPE7M426T317R, issued by the DLA Land and Maritime office in Columbus, Ohio, and categorized under NAICS code 333996. Only electronic quotes are accepted, and hard copies of the solicitation are not available; all submissions must be made through the provided online portal. Approved sources for the part include 0UBG9 9556693-01, 0UBG9 RY-166400 ITEM13, 0UBG9 RY156693, and 96169 RY-166400 ITEM 13 ALTERNATE, with no technical specifications, plans, or drawings provided. The solicitation is open to all responsible sources, and quotes must be submitted by the deadline of August 17, 2026. For inquiries, prospective vendors are directed to contact the listed buyer via email at DibbsBSM@dla.mil, with additional details accessible through the SAM.gov portal using the solicitation number.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
Federal
43--PUMP,SLIDING SHOE
Solicitation # SPE7M126T267N
The solicitation seeks 33 sliding shoe pumps identified by NSN 4320012356167 for delivery to DLA Distribution under the W1A8 location, with a required delivery timeframe of 280 days after award. The only approved source for this item is CW7055/H-200C.I. with vendor code 52330, and no alternative suppliers are permitted unless specifically authorized. This procurement is conducted via a Request for Quote (RFQ), with no hard copy documents available; all submissions must be made electronically through the official portal. Specifications, plans, or technical drawings are not provided, and responsible contractors are encouraged to submit quotes based on the available information. The solicitation number is SPE7M126T267N, posted on August 6, 2026, with a response deadline of August 17, 2026. The procurement falls under NAICS code 333996 and is managed by the Department of Defense through DLA Land and Maritime based in Columbus, Ohio. All inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
Federal
43--RING,WEARING
Solicitation # SPE7M126T262P
The contract seeks the procurement of two wearing rings with NSN 4320014933802, to be delivered to W1A8 DLA DISTRIBUTION within 168 days of award. The only approved source for this item is 63857 with part number 0654C0562C031A. The solicitation, identified as SPE7M126T262P, is issued as a request for quotation and must be submitted electronically; hard copies are not available. No specifications, plans, or drawings are provided, and all responsible sources are invited to submit quotes that are received prior to the deadline. The opportunity is open without set aside restrictions and falls under NAICS code 333996. The contracting office is the DLA Land and Maritime under the Department of Defense, located in Columbus, Ohio. All inquiries must be directed via email to the designated point of contact, with further details accessible through the SAM.gov link or the DIBBS solicitation portal using the provided solicitation number. Quotes must be submitted no later than August 17, 2026.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
Federal
43--IMPELLER,PUMP,CENTR
Solicitation # SPE7M126T253Q
The solicitation seeks the procurement of 13 impellers for centrifugal pumps under NSN 4320010224829, with delivery required to DLA Dist San Joaquin under the W1A8 location within 168 days after order placement. The approved source for this item is identified as 10941 002-06J-E01P210-5 7/8, and only electronic quotes are accepted—hard copies are not available. The solicitation, numbered SPE7M126T253Q, is issued as a combined action under NAICS code 333996 and is open to all responsible sources who submit timely responses. No technical specifications, plans, or drawings are provided, and all quotes must be submitted electronically via the SAM.gov portal before the deadline of August 17, 2026. The contracting office is the DLA Land and Maritime division based in Columbus, Ohio, with inquiries directed to the designated point of contact via email. The solicitation was posted on August 6, 2026, and all relevant documents can be accessed online through the SAM.gov link provided.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
Federal
43--SEAL ASSEMBLY,SHAFT
Solicitation # SPE7M126T256T
The contract seeks the procurement of 10 units of NSN 4320015125810 SEAL ASSEMBLY, SHAFT, with delivery required to W1A8 DLA DIST SAN JOAQUIN within 168 days after award. Only two approved sources are identified for this item, specifically 10941 091-125-99-0003 and 10941 999-1107-B-01 ITEM NO.90. The solicitation is issued as an RFQ under number SPE7M126T256T, posted on August 6, 2026, with quotes due by August 17, 2026. No hard copies of the solicitation are available; all submissions must be made electronically through the designated online portal. Specifications, plans, or drawings are not provided, and all responsible sources are invited to submit quotes provided they meet the submission deadline. The procurement falls under NAICS code 333996 and is managed by the DLA Land and Maritime office in Columbus, Ohio. Inquiries must be directed via email to the point of contact listed, with further details accessible through the SAM.gov workspace link or the DIBBS solicitation search tool.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
Federal
43--SLIPPER ASSEMBLY,ROTAR
Solicitation # SPE7M426T311T
The contract involves the procurement of 9 slipper assemblies, rotation type, identified by NSN 4320012232536, to be delivered to DLA Distribution Puget Sound within 530 days of award. The approved source for this item is supplier code 63857 with part number 379Z0016. The solicitation is issued as an RFQ under number SPE7M426T311T and is exclusively available electronically through the designated online link; no hard copies will be provided, and no specifications, plans, or drawings are accessible to potential offerors. All responsible sources are eligible to submit quotes provided they are received by the deadline of August 17, 2026, and all submissions must be made electronically. The procurement is classified under NAICS code 333996 and is managed by the DLA Land and Maritime office located in Columbus, Ohio. Questions should be directed via email to the point of contact listed in the solicitation, with additional guidance available through the DIBBS website using the solicitation number.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
Federal
43--PUMP,HYDRAULIC MANU
Solicitation # SPE7M126T253D
The contract is for the procurement of 17 hydraulic manual pumps under NSN 4320004022516, with delivery required to DLA Distribution Jacksonville within 120 days of award. Only two approved sources are authorized for this procurement, identified by their vendor codes 00994 and 05060, both using the part number 941AS128. The solicitation is issued as a Request for Quote under number SPE7M1Q26T253D, published on August 6, 2026, with quotes due by August 17, 2026. It is a Small Business Set Aside, total, and falls under NAICS code 333996 for other commercial and service industry machinery manufacturing. All responsible sources may respond, but quotes must be submitted electronically; no hard copies or technical specifications, plans, or drawings are available. The contracting office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime, and all questions must be directed via email to the designated point of contact listed in the solicitation document accessible through the provided SAM.gov link.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
Federal
43--PARTS KIT,ROTARY PU
Solicitation # SPE7M126T263Y
The contract involves the procurement of 10 units of NSN 4320015119906, PARTS KIT, ROTARY PU, with a delivery requirement to W1A8 DLA DISTRIBUTION within 254 days after award. The solicitation, identified as SPE7M126T263Y, is a Small Business Set Aside under NAICS code 333996 and is exclusively available electronically via the SAM.gov platform; no hard copies are provided, and no specifications, plans, or drawings are included. Only approved source 07524 957450 is recognized for this item, but all responsible sources may submit quotes if received by the deadline of August 17, 2026. Quotes must be submitted electronically, and the point of contact for inquiries is listed as DibbsBSM@dla.mil, with additional guidance directing users to the DIBBS website if the provided link is inaccessible. The contracting office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime organization.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 335921
New
DIBBS
CABLE, FIBER OPTIC
Solicitation # SPE7M1-26-T-269A
The contract specifies the procurement of 10 units of fiber optic cable identified by NSN 6015-01-555-8557 and part numbers 820-L14-006 and GBLCT-D2-02, classified as a commercial off-the-shelf item. Delivery is required within 20 days of contract award, with shipment originating FOB origin and no tolerance allowed for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly follow MIL-STD-2073-1E and MIL-STD-129, including method 10 for physical protection, cleaning and drying processes that do not damage the cable, and secure neutral wrapping of cable ends for at least four inches. Cables must be spooled or coiled on a minimum six-inch diameter form, with shorter lengths securely tied at three points and boxed in accordance with specified standards. All packaging must be marked per MIL-STD-129 and include the required special markings and codes. The shipment is destined for the Afloat Training Group in Norfolk, Virginia, and must be transported via the fastest traceable means, explicitly excluding parcel post. The contract references compliance with DLA’s master list of technical and quality requirements and mandates adherence to all applicable packaging, marking, and transportation protocols outlined in DLA procedural notes. The required delivery date is August 7, 2026, with the solicitation issued under SPE7M1-26-T-269A, and the point of contact is Michael Reese at the Department of Defense’s Maritime Supply Chain.
Fiber Optic Cable Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333914
New
DIBBS
COUPLING, SHAFT, RETAINE
Solicitation # SPE7M1-26-T-268N
The contract pertains to the procurement of a coupling, shaft, retainer item identified by NSN 4320-01-183-1924 and part number 393479, supplied by General Electric Company and Eaton Aerospace, LLC, and classified as a commercial item and critical application component for use on the GE 100 engine. The item is subject to DLA Packaging Requirements for Procurement and must comply with ASTM D3951 unless superseded by more stringent technical or quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must adhere to RP001 guidelines. The unit of issue is each (EA), with a fixed quantity of 15 units at a unit price of $15.00, totaling $225.00, and no variance is permitted in quantity. Delivery is mandated FOB origin with inspection and acceptance occurring at destination, and the item must be delivered within 165 days from the contract award, with a required ship date of February 2, 2027. The contract is issued under solicitation number SPE7M1-26-T-268N, posted on August 9, 2026, with responses due by August 20, 2026, under NAICS code 333914 and managed by the Department of Defense’s Maritime Supply Chain. Delivery is to be made to DLA Distribution Depot Oklahoma at Tinker AFB, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The item is part of a GE PBL program, and all government identification must be removed from non-accepted supplies. The point of contact for the contract is Michael Reese, with email and phone provided for inquiries. The unit of issue and purchase unit are standardized per DLA’s official reference, and all terms align with DoD procurement protocols for simplified or large acquisitions as applicable.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M1-26-T-269R
The contract is for the procurement of 41 electromagnetic relays with NSN 5945-00-690-2707 under solicitation SPE7M1-26-T-269R, issued as a total small business set-aside under NAICS code 335314 by the Department of Defense’s Maritime Supply Chain. The response deadline is August 20, 2026, and delivery is required within 327 days after contract award. The item includes technical data subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors approved by DLA,持有有效的美加联合认证计划证书, who have completed required training on handling DOD export-controlled technical data and passed the DLA questionnaire. Packaging must meet DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked per specified requirements. The contract incorporates technical and quality requirements from the DLA Master List, with the controlling revision determined by the solicitation or award date depending on acquisition size. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Joseph Madjecki at DLA.
Relay and Industrial Control Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 444180
New
DIBBS
NRP, LAMP, MARKER YEL
Solicitation # SPE7M1-26-T-268S
The contract pertains to the procurement of 28 yellow lamp markers with NSN 5960016136117 and part number 3847AS269-1, supplied by CAROLINA GROWLER INC under solicitation SPE7M1-26-T-268S. The item is classified as a critical application item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Delivery is due within 165 days, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-2073-1E with specific methods including dry preservation, D3 unit containers, E5 intermediate containers in quantities of 40, and a U pack code. Marking must follow MIL-STD-129 and include the special code 36 indicating fragile, with arrows pointing up and glass handling instructions. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and transportation logistics are governed by DLAD Proc Note C19 for shipping and C20 for first destination. The required ship date is February 2, 2027, with an original delivery deadline of April 20, 2027. The unit of issue is each, priced at $28.00 per unit, totaling $784.00. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, under NAICS code 444180, and is managed by the Department of Defense’s Maritime Supply Chain agency with Ryan Snyder as the primary point of contact.
Other Building Material Dealers

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
CYLINDER SLEEVE
Solicitation # SPE7M1-26-T-268V
The contract pertains to the procurement of three Cylinder Sleeves with NSN 4310-01-004-3608 and part number H32554 from Curtiss-Wright Electro-Mechanical Corp, under solicitation SPE7M1-26-T-268V. Delivery is required FOB origin within 401 days, with inspection and acceptance occurring at the destination facility in Tracy, California. The unit of issue is each, at a fixed price of $3.00 per unit, with no variance permitted in quantity. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with controlling revisions determined by acquisition type and amendment dates. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specific methods for preservation, wrapping, and containerization, with palletization adhering to DLA packaging standards. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the item, except for approved functional uses in batteries, lights, sensors, weapons, or chemical reagents; portable devices containing mercury must include shockproof design and a secondary containment as specified by NAVSEA 5100-003D. Rework of non-conforming material is permitted under FAR 52.209-4. The contract mandates strict adherence to marking and shipping protocols, with delivery directed to the designated DLA warehouse address. The original required delivery date was January 12, 2027, but the current need ship date is September 26, 2027.
Air and Gas Compressor Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-267Z
This contract specifies the procurement of 2,500 feet of electrical wire with NSN 6145-01-496-8616 under solicitation SPE7M1-26-T-267Z, issued by the Department of Defense through the Maritime Supply Chain. Delivery is required FOB origin within 62 days, with a quantity variance allowance of plus or minus 5 percent, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all packaging must be marked and labeled accordingly. The DLA Master List of Technical and Quality Requirements takes precedence over any general standards, and all technical and quality specifications referenced by R or I numbers are incorporated by direct linkage to the DLA eProcurement website. The unit of issue is feet, with 500 feet per unit pack, and the delivery address is DLA Distribution Jacksonville at Bldg 175, Swan Road, Jacksonville, FL 32212-0103, with a required ship date of June 24, 2025, though the original required delivery date is set for December 31, 2026. The contract mandates removal of government identification from non-accepted supplies and identifies four qualified suppliers: NEXANS AEROSPACE USA LLC, THE BOEING COMPANY, WIREMASTERS INC., and ALLIED WIRE AND CABLE LLC, all using part number 5M2409-001. Transport and freight details are governed by DLAD Proc Notes C19 and C20, and point of contact is Alisha Blanton at DLA.
Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334514
New
DIBBS
SENSOR, CURRENT
Solicitation # SPE7M1-26-T-268C
The contract specifies the procurement of a commercial off-the-shelf current sensor identified by part number 6SL3053-0AA00-3AA1 and NSN 6625016911758, with a required quantity of three units. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including MIL-STD-129 marking with no special codes. The item may contain batteries, and government identification must be removed from any non-accepted supplies. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped within 20 days of contract award, using the fastest traceable means, explicitly excluding parcel post, to the specified Virginia Beach delivery address under RDD 777. The purchase request is 7017784096, with a total price of $3.00 per unit, and the original required delivery date is August 5, 2026. The solicitation number is SPE7M1-26-T-268C, issued by the Department of Defense's Maritime Supply Chain, with Michael Reese as the primary point of contact.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334516
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-T-268E
This contract specifies the procurement of a gas detector, identified by NSN 6665-01-609-1302, with a quantity of two units to be delivered within 20 days under solicitation SPE7M1-26-T-268E. The item is designated as a critical application item with a non-extendable shelf life of 12 months, classified as Type II, and must comply with all applicable DLA packaging and technical requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Mercury and mercury-containing compounds are strictly prohibited except in functional applications such as batteries, fluorescent lamps, and specified instruments, with portable devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. The detector must be delivered FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must adhere to DLA’s procurement standards, including palletization and special marking code 33 for shelf-life compliance. Hazardous material shipping requirements are governed by IP025 and DLAD procedural notes C19 and C20. The delivery address is Misawa Air Base, Japan, and the original required delivery date is August 10, 2026. The contract follows DoD unit of issue standards and incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements.
Analytical Laboratory Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M1-26-T-270A
This contract specifies the procurement of one power supply unit with NSN 6120016923555 under solicitation SPE7M1-26-T-270A, requiring delivery within 20 days FOB origin, with no tolerance for quantity variance. The item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and must be palletized per DLA packaging guidelines. Mercury or mercury-containing compounds are strictly prohibited unless exclusively used in approved functional components such as batteries, fluorescent lights, certain instruments, weapon systems, or chemical reagents as specified by NAVSEA, and portable mercury-containing devices must have shock-proof containment and a secondary boundary as defined by NAVSEA 5100-003D. Delivery is to be shipped to the USS FT LAUDERDALE LPD 28 in Pascagoula, Mississippi, using the fastest traceable means—parcel post is explicitly prohibited. The supply must be delivered by January 27, 2026, and is subject to inspection and acceptance at the destination point. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the type and timing of the acquisition. The contract unit of issue is each (EA), with a total price listed as $1.000, and vendors must use the VSM system for the zip code 39568. Government-specific codes and identifiers are provided for logistics and tracking purposes, with primary point of contact being Michael Reese of the Department of Defense.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-268M
The contract is for the procurement of a filter element identified by part number 45012007 and NSN 4330015446534, with a total quantity of 11 units, each priced at $11.00, under solicitation SPE7M1-26-T-268M. Delivery is required within 165 days from the contract award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines and unit packaging defined by the contract. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, and transportation must follow DLAD Proc Note C19 for shipping and C20 for first destination transport. The original required delivery date is December 13, 2026, with a need ship date of February 2, 2027. The contract falls under NAICS code 333998 and is managed by the Department of Defense’s Maritime Supply Chain. All technical and quality specifications referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
ARMATURE, MOTOR
Solicitation # SPE7M1-26-T-268J
The contract pertains to the procurement of two armatures for motors, identified by part number 888146-0-54S and NSN 6105011573021, supplied by WARD LEONARD CT LLC with CAGE code 63743. The item is designated as a critical application component, requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The supplies must be free of intentional mercury or mercury-containing compounds, except for specific functional uses in batteries, lamps, sensors, weapon systems, or Navy-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. Packaging must comply strictly with MIL-STD-2073-1E, including preservative methods, desiccant, humidity indicators, and packaging levels designated as military grade. The containers must be properly blocked, braced, and immobilized to survive Distribution Cycle 18, Assurance Level II under ASTM D4169, and must meet all performance criteria for safe delivery; failure to do so necessitates redesign. Marking must follow MIL-STD-129 and ASTM D5445, including special markings such as “Do Not Bend,” “Arrow Up,” “Center of Balance,” and “Open This Side,” with serial numbers documented on all packaging levels and reflected in the packing list. All items must be delivered FOB origin within 165 days to DLA Distribution at Robins AFB, Georgia, with a required ship date of February 2, 2027, and original delivery date of May 9, 2028. The contract is structured as a Small Business Set-Aside under NAICS code 335312, with a total quantity of two units at a unit price of $2.00, and requires the contractor to provide ready-to-issue, serviceable materiel for direct DOD use.
Motor and Generator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M1-26-T-269K
This contract outlines the procurement of a fixed ceramic capacitor, part number CCR06CG472GS, manufactured in compliance with MIL-PRF-20/36H and MIL-PRF-20N Supplement 1, both effective as of specified revision dates. The item is classified as a commercial item under FAR 11.001 and is subject to strict quality control, requiring procurement exclusively from qualified sources listed on the Qualified Product Database (QPD) in accordance with MIL-PRF-20. Commercial substitutes are prohibited without prior written government approval. The capacitor must meet all technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, and the use of ozone-depleting substances is explicitly forbidden unless granted written authorization by the Contracting Officer. Mercury and mercury-containing compounds are prohibited in its construction or direct contact, with limited exceptions for specific functional uses such as batteries, fluorescent lighting, and naval instruments, all subject to additional containment requirements. The item must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including special packaging and preservation methods as defined by MIL-DTL-39028 for capacitors. Each individual unit pack must bear lead-free or lead-containing attribute markings as per IPC/JEDEC J-STD-609, with placement and documentation requirements fully specified. The delivery is FOB origin, with a total quantity of 1,281 units to be delivered within 74 days, subject to zero quantity variance. Inspection and acceptance occur at the destination, and the shipping address is designated as DLA Distribution Jacksonville. The contract prohibits the use of hazardous materials without compliance to IP025 and requires adherence to all transportation directives under DLAD Proc Notes C19 and C20. The item is designated as a critical application component, and all packaging data has been reviewed and released in SAP as of May 13, 2026.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details