Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RUBBER SHEET, CELLULAR

Active
SPE8E5-26-T-3906Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of rubber sheet, cellular, identified by NSN 9320-01-665-3250, with a quantity of 51 linear feet, under solicitation SPE8E5-26-T-3906. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any referenced standards such as ASTM D6576-20 and ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements RP001, including proper marking, labeling, and palletization as specified. The item is to be delivered FOB origin, with inspection and acceptance point at destination, and a permissible quantity variance of plus or minus 10%. The required delivery date is 139 days from the contract award, with an original required delivery date of August 22, 2027 and a need ship date of January 4, 2027. Transportation and shipping instructions align with DLAD Proc Notes C19 and C20, and the delivery address is DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The unit of issue is foot, with a unit price of $51.00 and a total price of $51.00. The contract includes provisions for the removal of government identification from non-accepted supplies and addresses covered defense information where applicable. Contract performance is managed by the Department of Defense, with primary point of contact Brandon Wicker, and the solicitation closed on August 17, 2026.

General Info

Procure 51 linear feet of rubber sheet NSN 9320-01-665-3250 at $51.00, deliver FOB origin to New Cumberland, PA by January 4, 2027.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E5-26-T-3906 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
BRANDON WICKER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RUBBER SHEET,CELLULAR
RUBBER SHEET, CELLULAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
TDP Rev A Gen 1 IAW BASIC NON GOVT STD ASTM D6576-20 REVISION NR 20 DTD 07/01/2020 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017423193 0001 FT 51.000
NSN/MATERIAL:9320016653250
DELIVERY (IN DAYS):0139
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE8E5-26-T-3906
SECTION B
PR: 7017423193 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/04/2027 Original Required Delivery Date:08/22/2027
SPE8E5-26-T-3906 NSN/Part Number: 9320-01-665-3250 Quantity: 51 FT Purchase Request: 7017423193QTY: 51 Delivery: 139 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326299
New
DIBBS
Cellular Rubber Sheet Manufacturing & SupplyThe contract requires the manufacture and supply of cellular rubber sheeting at a thickness of 1/16 inch, specifically designed to be asbestos-free and compliant with the SAE AMS3195H specification. The material must also adhere to military packaging and marking standards to ensure proper handling, identification, and logistics integration within defense supply chains. The product is intended for use in applications where consistent physical properties, durability, and safety are critical, and the absence of asbestos ensures compliance with current health and environmental regulations. The solicitation is issued as a subcontract under the NAICS code 326299 for other rubber product manufacturing, and the place of performance is tied to Cherry Point, North Carolina with a zip code of 28533-5040. The opportunity was posted on August 5, 2026, and responses are due by August 17, 2026, providing potential suppliers with a twelve-day window to submit proposals. The sponsoring agency is part of the Department of Defense, operating under the Cherry Point Phantom Rd Bldg designation, indicating this requirement is part of a broader military logistics or maintenance initiative. Full details and submission guidelines are accessible via the provided DIBBS portal link.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
Rubber Block Supply (NSN: 9320015656471)
DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
Supplier of Nonmetallic Special Shaped Sections (Seals/Gaskets) to ASTM D2000The contract requires the supply of nonmetallic special shaped sections including seals, gaskets, and molded rubber components that must fully comply with ASTM D2000 M3 BE610 A14 E014 F19 specifications, ensuring dimensional accuracy, material properties, and performance under operational conditions. All items must be properly packaged and labeled in accordance with industry standards and must adhere to hazardous materials communication requirements, including appropriate labeling, safety data sheets, and handling instructions to ensure safe transportation and use. The items are intended for use within Department of Defense operations, specifically designated for performance at Tinker Air Force Base, with a ZIP code of 73145-8000. The solicitation is classified as a subcontract under NAICS code 326299, which refers to other rubber product manufacturing, and was posted on August 5, 2026, with a response deadline set for August 17, 2026. There is no set-aside designation specified, and the contracting entity is the Construction & Equipment MRO SVC I under the Department of Defense. All submissions must be delivered through the DIBBS platform using the provided UI link, and no point of contact information is listed in the posting. Suppliers must ensure full technical compliance with the referenced ASTM standard and all regulatory requirements related to hazardous materials to be considered for award.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
Nonmetallic Special-Shaped Seal Manufacturing
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, CELLULAR
Solicitation # SPE8E5-26-T-3910
The contract specifies the procurement of rubber sheet, cellular, under NSN 9320-01-665-3250, with a required quantity of five feet to be delivered within five days of order placement. Delivery is FOB origin, with inspection and acceptance points at the destination, and a quantity variance allowance of plus 10 percent and minus zero percent. The product must conform to ASTM D6576-20 Revision 20 dated July 1, 2020, and all technical and quality requirements from the DLA Master List of Technical and Quality Requirements prevail over any referenced ASTM standards. Packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement. The material must be shipped via traceable means, excluding parcel post, to the designated delivery address in Corpus Christi, Texas, under RDD/NCMS shipment protocols. The unit of issue is feet, with a total contract value of $5.00, and the purchase request number is 7017354655. The contract is issued under solicitation SPE8E5-26-T-3910, with a response deadline of August 17, 2026, and is managed by the Defense Logistics Agency. Government-specific identifiers and markings apply, and the item is subject to Covered Defense Information protocols. The original required delivery date is July 6, 2026.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E5-26-T-3880
The contract solicits 35 sheets of solid rubber, identified by NSN 9320-01-158-6557, under solicitation number SPE8E5-26-T-3880, with a response deadline of August 17, 2026, and a delivery requirement of 30 days after award. The product must comply with technical and quality standards referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA specifications, and any non-accepted supplies must have government identification removed prior to return. Full and open competition is authorized, and the procurement is conducted in accordance with a military or federal specification. The contracting activity is managed by the Department of Defense through the San Diego office, with performance location at 92136-3581, and the point of contact is Joel Dalafave, reachable via email and phone provided. The NAICS code is 326299, indicating the industry classification for the product category.
SAN DIEGO

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, CELLULAR
Solicitation # SPE8E5-26-T-3883
The contract pertains to the procurement of rubber sheet, cellular, identified by NSN 9320-01-310-5069, with a quantity of five units to be delivered within 139 days from award. The solicitation, issued under number SPE8E5-26-T-3883, was posted on August 5, 2026, with responses due by August 17, 2026, and is open to full and open competition under a military or federal specification. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, where revisions applicable to simplified acquisitions are determined by either the solicitation issue date or award date, while large acquisitions rely on the RFP issue date unless an amendment supersedes it. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. The procurement is managed by the DDSP New Cumberland Facility under the Department of Defense, with performance location in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Joel Dalafave, reachable via email and phone for inquiries.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
DRY SUIT, RESCUE
Solicitation # SPE8E6-26-T-4115
This contract specifies the procurement of 13 units of a X-Large Rescue Dry Suit, designated NSN 4220-01-499-3357 and part number 183005, for use by Aviation Rescue Swimmers. The supplier must be either Mustang Survival Mfg, Inc. or Diving Unlimited International Inc., with strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. The dry suit is classified as a Critical Application Item, and all materials delivered must comply with the Certificate of Quality Compliance clause, ensuring no intentional use of mercury or mercury-containing compounds, except for approved functional applications such as batteries, sensors, or instruments specified by NAVSEA, which must include secondary containment and be shock-proof. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with acceptable materials per ASTM D3951, and include a detailed packing list containing vendor name, delivery order number, MIPR number, shipment date, quantity, and applicable certifications. The product is to be delivered FOB Origin, with inspection and acceptance occurring at the destination facility in Tracy, California. The required delivery date is 150 days from the contract award, with a firm delivery deadline of May 2, 2027, and a mandatory ship date no later than January 15, 2027. The solicitation is a total small business set-aside under NAICS code 326299, and all documentation, including CDRLs and DD Form 1423s, must be sourced from the DLA Technical Data Management Transformation system or the official DLA website.
DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E6-26-T-3989
The contract is for the procurement of 3 sheets of solid rubber material, measuring 0.250 inches thick, 36 inches wide, and 36 inches long, with a smooth finish on both sides. The item is identified by NSN 9320-00-042-3117 and is being acquired under solicitation SPE8E6-26-T-3989, with a response deadline of August 17, 2026. The delivery is scheduled 167 days after contract award. The specification prohibits the presence of asbestos as defined in FED-STD-313 and mandates compliance with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with acceptance criteria requiring zero non-conformances unless otherwise stated in the contract. Attributes are to be classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The procurement is fully competitive under a federal or military specification, and performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002. The contracting office is the DLA New Cumberland Facility under the Department of Defense, with Ryan Kirlin designated as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E5-26-T-3888
The contract is for the procurement of solid rubber sheeting identified by NSN 9320-01-433-8937 in a quantity of two units under solicitation SPE8E5-26-T-3888, with a response deadline of August 17, 2026. The item is procured under a fully competitive process in accordance with a military or federal specification, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Packaging must comply with DLA standards, and any government identification on non-accepted supplies must be removed prior to return. The delivery requirement is 101 days after award, with performance taking place in Tracy, California, 95304-5000. The contracting activity is DLA Dist San Joaquin under the Department of Defense, with Brandon Wicker listed as the primary point of contact reachable via email and phone. The NAICS code is 326299, and the solicitation is open to federal procurement with no set-aside designation.
DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E9-26-T-3382
The contract specifies the procurement of 12 shipping units of solid rubber sheeting, black in color, measuring 36 inches by 36 inches with a minimum thickness of 0.125 inches and a maximum of 0.250 inches, smooth on both sides. The item is identified by NSN 9320-00-377-1476 and is classified as a critical application item subject to stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards including ASTM D2000. The material must comply with ASTM D3951 for packaging and be labeled and marked per MIL-STD-129, with palletization in accordance with DLA Packaging Requirements. The delivery is FOB origin with a 111-day delivery window, and the required delivery date is October 30, 2026, with a need ship date of December 7, 2026. No quantity variance is permitted, and inspection and acceptance occur at the destination. Packaging and labeling must reflect the specified unit of issue and quantity per unit pack, and all packaging must comply with DLA directives. The contract is issued under solicitation SPE8E9-26-T-3382 by the Department of Defense, specifically the Construction & Equipment MRO Service I, with delivery addressed to DLA Distribution Warner Robbins at Robins AFB, Georgia. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is categorized under NAICS code 326299 for other rubber product manufacturing. The primary point of contact is Taylor Barletta, reachable via email and phone. This item is subject to Covered Defense Information protections and requires that government identification be removed from non-accepted supplies in compliance with RQ011. All documentation and execution must align with DLA’s eProcurement framework and authorized unit of issue standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E5-26-T-3886
The contract calls for the procurement of 6 units of rubber sheet, solid with NSN 9320-01-433-8937 under solicitation SPE8E5-26-T-3886, issued by the Department of Defense through the DLA New Cumberland Facility. The requirement is fully competitive and governed by a military or federal specification, with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which must be adhered to in full. Packaging must comply with DLA packaging guidelines, and any non-accepted supplies must have government identification removed prior to return. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and delivery is required within 139 days after order placement. The NAICS code 326299 categorizes this as a non-metallic mineral product manufacturing requirement, and the place of performance is specified as New Cumberland, Pennsylvania, with Brandon Wicker listed as the primary point of contact for inquiries.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 493190
New
DIBBS
Specialized Packaging and Labeling Services
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332211
New
DIBBS
Precision Milling Cutter Supply
Cutlery and Flatware (except Precious) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325520
New
DIBBS
Supply of Reflective Tape (Red, 6 Inches Wide, 1800 Inches per Roll)The contract entails the procurement and delivery of 158 rolls of red reflective tape, each measuring 6 inches in width and containing 1,800 inches of material, fully compliant with federal standards for reflectivity, durability, and use in hazardous material labeling. The tape must meet stringent performance criteria to ensure visibility and safety in critical applications, particularly within defense and transportation environments. The requirement is part of a subcontract under a Women-Owned Small Business Set-Aside, designated by NAICS code 325520, and is being managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance of this contract is required to take place at NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses must be submitted no later than August 17, 2026. All submissions must adhere to federal specifications ensuring the product's reliability under demanding conditions, and the award will be restricted to certified Women-Owned Small Businesses as mandated by the set-aside classification. The contract details are accessible via the DIBBS platform at the provided link, and timely compliance with delivery and quality requirements is essential for successful contract execution.
Adhesive Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332320
New
DIBBS
Supply of Welding Electrodes (NSN: 3439016664749)The contract pertains to the supply and delivery of 63 units of commercial off-the-shelf welding electrodes, with each unit containing 10 electrodes, for use in metal fabrication and repair operations. All electrodes must meet federal specifications and are identified by the National Stock Number 3439016664749. The requirement is issued under a subcontract with a response deadline of August 17, 2026, and was posted on August 5, 2026. The work is to be performed at the New Cumberland facility with a zip code of 17070-5002, under the authority of the Department of Defense through the DDSP New Cumberland Facility. The North American Industry Classification System code for this requirement is 332320, indicating it falls within the forge and stamping industry sector. No set-aside type or point of contact details are provided in the available data.

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Quality Certification and Documentation Services
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Preservation
Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Metal Marking and Identification
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331222
New
DIBBS
Precision Steel Bar Manufacturing and Supply
Steel Wire Drawing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery to Destination (FOB Destination)The contract requires the transport and delivery of packaged filter elements to the specified destination under FOB Destination terms, meaning the seller retains responsibility for all costs and risks until the goods arrive and are accepted at the destination. Proof of delivery and inspection readiness at the location are mandatory, ensuring the recipient can verify receipt and conduct immediate inspections upon arrival. The place of performance is clearly designated as New Cumberland with a zip code of 17070-5002, and the responsible agency is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The contract falls under NAICS code 484220, which corresponds to specialized freight trucking, indicating the need for specialized logistics handling. This is a subcontract opportunity with a response deadline of August 17, 2026, and it was posted on August 5, 2026, providing potential respondents approximately twelve business days to prepare and submit their proposals. All parties must ensure compliance with delivery timing, documentation requirements, and inspection protocols to meet contractual obligations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and DocumentationThe contract requires identification of hazardous materials within packaging or products, accurate preparation of Material Safety Data Sheets, and submission of sample hazard warning labels that meet federal and Defense Logistics Agency standards. All tasks must align with stringent regulatory requirements to ensure safety, compliance, and proper communication of risks associated with hazardous substances. The work is tied to a specific location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating that performance is expected to occur at or near this facility. The project falls under NAICS code 541690, which classifies it as other scientific and technical consulting services, confirming the nature of the work as technical and compliance-focused rather than manufacturing or logistical. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and it is structured as a subcontract, meaning the winning party will be working under a primary contractor rather than directly with the Department of Defense. The contracting office is the DDSP New Cumberland Facility under the Department of Defense, emphasizing this is a defense-related procurement requiring adherence to military and federal safety protocols.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Palletization, and Labeling ServicesThe contract requires the provision of military-compliant packaging, palletization, and labeling services for filter elements in accordance with ASTM D3951, MIL-STD-129, and DLA RP001 standards. All work must meet rigorous Department of Defense specifications to ensure compatibility with military logistics and supply chain operations, including proper identification, handling, and documentation of shipments. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the award is structured as a subcontract under the NAICS code 493190, indicating non-warehouse warehousing and storage activities. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 17, 2026. The contracting entity is the DDSP New Cumberland Facility under the Department of Defense, and all proposals must align with the precise technical and procedural requirements outlined in the referenced military and industry standards. Interested parties must submit their responses through the official DIBBS portal before the deadline to be considered for award.
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Filter Element Supply and ManufacturingThe contract entails the manufacture or supply of eight units of a specific filter element identified by NSN 4610015923060, fully compliant with applicable military and federal technical and quality standards. The work is being procured under a subcontract solicitation issued by the DDSP NEW CUMBERLAND FACILITY, a unit within the Department of Defense, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation falls under the NAICS code 332999 for other fabricated metal product manufacturing, indicating the specialized nature of the component production. Responses must be submitted by the deadline of August 17, 2026, with the solicitation made available to potential suppliers through the DIBBS platform as of August 5, 2026. All suppliers are expected to meet stringent defense-related specifications regarding material, construction, testing, and documentation to ensure interoperability and reliability in operational environments.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details